CD4045BEX - 21-Stage CMOS Counter | Harris Corporation
N.º de pieza: CD4045BEX ✗ Fin de vidaCD4045BEX Descripción general
A CMOS counter is a synchronous or asynchronous digital logic circuit that divides an input frequency into lower-frequency outputs by advancing through binary states. The CD4045B belongs to the 4000-series CMOS logic family, within the broader hierarchy of logic ICs, digital semiconductors, and integrated circuits. Its primary roles are frequency division, timing, waveform shaping, and low-power digital sequence generation.
The architecture provides 21 counter stages for high division ratios, two output-shaping flip-flops, two inverter output drivers, and input inverters. The shaped output supports a 3.125% duty cycle, making the device useful when a narrow pulse or clock-like waveform is required. The manufacturer’s CD4045B information identifies parametric testing at 5 V, 10 V, 15 V, and 20 V, indicating operation across multiple supply conditions.
Push-pull output drivers provide a defined output configuration for driving downstream digital circuitry. Compared with open-drain implementations, this arrangement can simplify clock-chain design by avoiding an external pull-up resistor. The high division count also allows a single input clock to generate a substantially lower-frequency output without arranging a long chain of separate counter packages.
Typical uses include crystal-based timekeeping, programmable timer and delay circuits, industrial pulse-generation systems, frequency dividers, and low-power digital instrumentation. Battery-operated equipment is another relevant application area because the CD4000B family was designed for digital equipment requiring low dissipation or battery operation. Its counter stages can establish long timing intervals when driven from a stable frequency source.
When laying out a CD4045BEX circuit, use the manufacturer pin-description table to assign every connection and place any required clock, reset, and output components close to their associated pins. Pay particular attention to unused inputs and supply decoupling. The CMOS counter can support long timing intervals, but output jitter, clock rise time, reset behavior, and power-supply noise ultimately determine the accuracy of the resulting time interval.
This product page combines the counter architecture, verified manufacturer descriptions, packaging information, drop-in alternatives, parameter comparisons, and practical implementation guidance. It is designed to help engineers identify the correct Harris variant, understand the 21-stage divider behavior, and plan a PCB or legacy-system replacement without overlooking pin compatibility or output-waveform requirements.
Alternativas directas para CD4045BEX — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con CD4045BEX (mismo factor de forma y huella) — difiere en Counter Width, Logic Family, Package.
CD4045BE
✅ Sustitución directaConsulte el precio
Ver hoja de datos →CD4045BE
✅ Sustitución directaConsulte el precio
Ver hoja de datos →CD4045BEX Valores máximos y características eléctricas
| Counter Stages | 21 stages |
| Counter Element | 1 element |
| Counter Width | 21 bit |
| Counting Edge | Negative edge |
| Output-Shaping Flip-Flops | 2 flip-flops |
| Shaped Output Duty Cycle | 3.125% |
| Output Driver Type | 2 push-pull inverter drivers |
| Input Inverters | Present |
| Parametric Test Supply Conditions | 5 V, 10 V, 15 V, and 20 V |
| Quiescent Current Test Condition | 100% tested at 20 V |
| Encapsulado | 16-pin plastic dual in-line package |
| Recuento de pines | 16 pins |
| Technology | CMOS |
| Logic Family | CD4000B series |
| Qualification Reference | JEDEC Tentative Standard No. 13B |
Guía de configuración de pines de CD4045BEX 16-pin plastic dual in-line package
Configuración de pines para CD4045BEX (encapsulado 16-pin plastic dual in-line package). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para CD4045BEX.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
CD4045BEX es adecuado para 6 aplicacións: Crystal-Based Timekeeping, Programmable Timer and Delay, Frequency Divider, Industrial Pulse Generation, Low-Power Digital Instrumentation, Legacy Control-System Counter.
Crystal-Based Timekeeping
The CD4045BEX fits crystal-based timekeeping because its input inverters can participate in an oscillator arrangement while 21 counter stages divide the crystal-derived frequency into a much longer timing interval. The counter operates on the negative clock edge, and its output-shaping flip-flops produce a waveform with a 3.125% duty cycle. This combination can simplify legacy clock dividers compared with arranging many separate counter packages. Practical accuracy still depends on the crystal, oscillator loop, supply noise, and propagation-delay variation, so the timing budget should include counter jitter and temperature effects.
Recomendado
Programmable Timer and Delay
A CD4045BEX can generate long delays or periodic timing signals from a stable input clock because its 21 counter stages provide a high division ratio. The external input frequency and selected counter output determine the available timing intervals, while the shaped output creates a narrow, predictable waveform. In a programmable timer, a counter output can be combined with logic that reloads or gates the clock. The implementation must account for reset pulse width, clock edge placement, and propagation delay so the decoded interval remains repeatable across the complete operating-temperature range.
Recomendado
Frequency Divider
The CD4045BEX is well suited to frequency division because 21 counter stages can reduce an input frequency substantially within one package. A negative-edge-triggered architecture allows the stage outputs to be used as progressively divided clocks, and the two shaping flip-flops can create a defined 3.125% duty-cycle output. This is useful in clock trees, tone generation, and instrumentation that needs a lower-rate reference without using a bank of separate counters. Designers should evaluate jitter, output rise and fall times, and the maximum clock frequency permitted for the selected device grade.
Recomendado
Industrial Pulse Generation
For industrial pulse generation, the CD4045BEX can divide a system clock and shape the selected counter output into a narrow pulse. Its 3.125% duty-cycle output is useful when downstream circuitry requires a defined narrow event rather than a nearly symmetrical square wave. The push-pull inverter drivers simplify connection to compatible CMOS logic, while the 21-stage counter supports long period generation from a comparatively high-frequency source. In a control system, synchronize the output with the receiving logic and verify pulse width, edge timing, reset recovery, and supply-noise margin over the full environmental range.
Recomendado
Low-Power Digital Instrumentation
The CD4045BEX supports low-power digital instrumentation when a compact frequency divider or timing reference is required. The CD4000B family was identified by the manufacturer for equipment emphasizing low dissipation or battery operation, and the counter integrates 21 stages, waveform shaping, and output drivers in one package. A low-power instrument can use the divided clock to reduce the rate at which a display, memory, or measurement subsystem is updated. The real power budget must include both static current and dynamic current from clock transitions, so a slow clock may save more energy than the counter itself consumes.
Recomendado
Legacy Control-System Counter
The CD4045BEX can serve as a counter element in legacy control systems built around 16-pin CMOS logic. Its 21-stage divider, input inverters, and shaped push-pull outputs reproduce the functions historically used for sequencing, delay generation, and clock division. A direct board-level repair is technically attractive because the family is associated with the 16-PDIP footprint. Before replacement, check every pin against the manufacturer description, confirm the temperature grade, and inspect the original assembly for socketed parts, contamination, or pin damage that could independently affect operation.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para CD4045BEX — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | CD4045BE | CD4045B |
|---|---|---|---|
| Package | 16-PDIP | 16-PDIP | 16-PDIP |
| Brand | Harris Corporation | Harris Corporation | Texas Instruments |
| Counter Stages | 21 stages | 21 stages | 21 stages |
| Counter Width | 21 bit | 21 bit | 21 bit |
| Counting Edge | Negative edge | Negative edge | Negative edge |
| Output-Shaping Flip-Flops | 2 flip-flops | 2 flip-flops | 2 flip-flops |
| Shaped Output Duty Cycle | 3.125% | 3.125% | 3.125% |
| Output Driver Type | Push-pull inverter output drivers | Push-pull inverter output drivers | Push-pull inverter output drivers |
Diferenciadores clave
- High division ratio in one counter package (frente a CD4045BE)
- Defined shaped-output waveform (frente a CD4045BE)
- Negative-edge counting with input inverter support (frente a CD4045B)
Notas de diseño
Do not infer pin assignments from the internal counter block diagram. Assign CLOCK, SET, RESET, supply, counter-output, and shaped-output positions directly from the manufacturer pin-description table for the 16-PDIP package. Pay particular attention to unused inputs because an unterminated CMOS control input can introduce unpredictable current and state changes. Confirm which counter outputs are externally accessible before designing a divider ratio that depends on a particular stage.
Treat the CD4045BEX clock as a timing-critical node. Route it away from switching outputs and noisy analog stages, provide a short return path, and avoid long unprotected traces that can pick up pulse interference. The counter advances on the negative clock edge, so clock rise time, edge jitter, and ringing directly affect the divider timing. Validate the waveform at the device pin with sufficient bandwidth and margin for the full supply and temperature range.
Estimate total dissipation using the actual supply voltage, clock transition rate, load capacitance, and output duty cycle rather than relying only on quiescent current. The manufacturer identifies 5 V, 10 V, 15 V, and 20 V parametric conditions, showing that operating current depends on the supply condition. Include the clocked node in the power budget because frequent CMOS transitions can dominate consumption even when the counter is otherwise lightly loaded.
Place the counter close to the oscillator or timing source to minimize clock-node capacitance and susceptibility to edge distortion. Keep output traces short enough to limit capacitive loading on the push-pull drivers, and provide a direct ground return for all supply current. For a legacy replacement, verify component height, socket compatibility, notch orientation, and pin numbering against the physical board rather than relying only on the 16-PDIP package name.
Información de cumplimiento
The manufacturer states that the CD4045B meets the requirements of JEDEC Tentative Standard No. 13B for B-series CMOS devices. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated for the exact CD4045BEX ordering code.