Harris Corporation

CD4045BEX - 21-Stage CMOS Counter | Harris Corporation

部品番号: CD4045BEX ✗ 生産終了
5 V, 10 V, 15 V, and 20 V Vdss 100% tested at 20 V Id 16-pin plastic dual in-line package Package
MOQ: 1 |

CD4045BEX 概要

Harris Corporation CD4045BEX is a CMOS 21-stage binary counter with output-shaping flip-flops, inverter output drivers, and input inverters, supplied in a 16-pin plastic dual in-line package. The counter contains 21 counting stages and uses two flip-flops to shape its output waveform to a 3.125% duty cycle. Push-pull operation is provided by the inverter output drivers, while the input inverters support use in crystal-oscillator and timer arrangements.

A CMOS counter is a synchronous or asynchronous digital logic circuit that divides an input frequency into lower-frequency outputs by advancing through binary states. The CD4045B belongs to the 4000-series CMOS logic family, within the broader hierarchy of logic ICs, digital semiconductors, and integrated circuits. Its primary roles are frequency division, timing, waveform shaping, and low-power digital sequence generation.

The architecture provides 21 counter stages for high division ratios, two output-shaping flip-flops, two inverter output drivers, and input inverters. The shaped output supports a 3.125% duty cycle, making the device useful when a narrow pulse or clock-like waveform is required. The manufacturer’s CD4045B information identifies parametric testing at 5 V, 10 V, 15 V, and 20 V, indicating operation across multiple supply conditions.

Push-pull output drivers provide a defined output configuration for driving downstream digital circuitry. Compared with open-drain implementations, this arrangement can simplify clock-chain design by avoiding an external pull-up resistor. The high division count also allows a single input clock to generate a substantially lower-frequency output without arranging a long chain of separate counter packages.

Typical uses include crystal-based timekeeping, programmable timer and delay circuits, industrial pulse-generation systems, frequency dividers, and low-power digital instrumentation. Battery-operated equipment is another relevant application area because the CD4000B family was designed for digital equipment requiring low dissipation or battery operation. Its counter stages can establish long timing intervals when driven from a stable frequency source.

When laying out a CD4045BEX circuit, use the manufacturer pin-description table to assign every connection and place any required clock, reset, and output components close to their associated pins. Pay particular attention to unused inputs and supply decoupling. The CMOS counter can support long timing intervals, but output jitter, clock rise time, reset behavior, and power-supply noise ultimately determine the accuracy of the resulting time interval.

This product page combines the counter architecture, verified manufacturer descriptions, packaging information, drop-in alternatives, parameter comparisons, and practical implementation guidance. It is designed to help engineers identify the correct Harris variant, understand the 21-stage divider behavior, and plan a PCB or legacy-system replacement without overlooking pin compatibility or output-waveform requirements.

ドロップイン代替品: CD4045BEX — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: CD4045BEX (同一形状・フットプリント) — 相違点: Counter Width, Logic Family, Package.

Texas Instruments
Counter Width: 21 bits
Logic Family: 4000-series CMOS
Package: PDIP-16
比較対象 CD4045BEX →

CD4045BE

✅ ドロップイン
Texas Instruments
📦 16-PDIP
CMOS 21-stage counter and timing circuit · 21 stages · 4000-series CMOS · 3 V to 18 V · 30 MHz · Negative edge · 1 element · 21 bits

価格はお問い合わせください

データシートを見る →

CD4045BE

✅ ドロップイン
Texas Instruments
📦 16-PDIP
CMOS 21-stage counter and timing circuit · 21 stages · 4000-series CMOS · 3 V to 18 V · 30 MHz · Negative edge · 1 element · 21 bits

価格はお問い合わせください

データシートを見る →

CD4045BEX 最大定格&電気的特性

Counter Stages 21 stages
Counter Element 1 element
Counter Width 21 bit
Counting Edge Negative edge
Output-Shaping Flip-Flops 2 flip-flops
Shaped Output Duty Cycle 3.125%
Output Driver Type 2 push-pull inverter drivers
Input Inverters Present
Parametric Test Supply Conditions 5 V, 10 V, 15 V, and 20 V
Quiescent Current Test Condition 100% tested at 20 V
パッケージ 16-pin plastic dual in-line package
ピン数 16 pins
Technology CMOS
Logic Family CD4000B series
Qualification Reference JEDEC Tentative Standard No. 13B

CD4045BEX 16-pin plastic dual in-line package ピン配置ガイド

CD4045BEX (16-pin plastic dual in-line package パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

CD4045BEX の 16-pin plastic dual in-line package パッケージピン配置図

詳細なピン配置データはありません: CD4045BEX.

詳細は データシート をご参照ください。

主な用途

CD4045BEX の用途: 6 件s: Crystal-Based Timekeeping, Programmable Timer and Delay, Frequency Divider, Industrial Pulse Generation, Low-Power Digital Instrumentation, Legacy Control-System Counter.

⏱️

Crystal-Based Timekeeping

The CD4045BEX fits crystal-based timekeeping because its input inverters can participate in an oscillator arrangement while 21 counter stages divide the crystal-derived frequency into a much longer timing interval. The counter operates on the negative clock edge, and its output-shaping flip-flops produce a waveform with a 3.125% duty cycle. This combination can simplify legacy clock dividers compared with arranging many separate counter packages. Practical accuracy still depends on the crystal, oscillator loop, supply noise, and propagation-delay variation, so the timing budget should include counter jitter and temperature effects.

⏲️

Programmable Timer and Delay

A CD4045BEX can generate long delays or periodic timing signals from a stable input clock because its 21 counter stages provide a high division ratio. The external input frequency and selected counter output determine the available timing intervals, while the shaped output creates a narrow, predictable waveform. In a programmable timer, a counter output can be combined with logic that reloads or gates the clock. The implementation must account for reset pulse width, clock edge placement, and propagation delay so the decoded interval remains repeatable across the complete operating-temperature range.

⚡

Frequency Divider

The CD4045BEX is well suited to frequency division because 21 counter stages can reduce an input frequency substantially within one package. A negative-edge-triggered architecture allows the stage outputs to be used as progressively divided clocks, and the two shaping flip-flops can create a defined 3.125% duty-cycle output. This is useful in clock trees, tone generation, and instrumentation that needs a lower-rate reference without using a bank of separate counters. Designers should evaluate jitter, output rise and fall times, and the maximum clock frequency permitted for the selected device grade.

🏭

Industrial Pulse Generation

For industrial pulse generation, the CD4045BEX can divide a system clock and shape the selected counter output into a narrow pulse. Its 3.125% duty-cycle output is useful when downstream circuitry requires a defined narrow event rather than a nearly symmetrical square wave. The push-pull inverter drivers simplify connection to compatible CMOS logic, while the 21-stage counter supports long period generation from a comparatively high-frequency source. In a control system, synchronize the output with the receiving logic and verify pulse width, edge timing, reset recovery, and supply-noise margin over the full environmental range.

🖥️

Low-Power Digital Instrumentation

The CD4045BEX supports low-power digital instrumentation when a compact frequency divider or timing reference is required. The CD4000B family was identified by the manufacturer for equipment emphasizing low dissipation or battery operation, and the counter integrates 21 stages, waveform shaping, and output drivers in one package. A low-power instrument can use the divided clock to reduce the rate at which a display, memory, or measurement subsystem is updated. The real power budget must include both static current and dynamic current from clock transitions, so a slow clock may save more energy than the counter itself consumes.

🔧

Legacy Control-System Counter

The CD4045BEX can serve as a counter element in legacy control systems built around 16-pin CMOS logic. Its 21-stage divider, input inverters, and shaped push-pull outputs reproduce the functions historically used for sequencing, delay generation, and clock division. A direct board-level repair is technically attractive because the family is associated with the 16-PDIP footprint. Before replacement, check every pin against the manufacturer description, confirm the temperature grade, and inspect the original assembly for socketed parts, contamination, or pin damage that could independently affect operation.

おすすめ製品の概要

CD4045BE Texas Instruments 使用用途: Crystal-Based Timekeeping, Programmable Timer and Delay, Frequency Divider, Industrial Pulse Generation, Low-Power Digital Instrumentation, Legacy Control-System Counter CD4045B Texas Instruments CD4045B family sourcing option 使用用途: Crystal-Based Timekeeping, Programmable Timer and Delay, Frequency Divider, Industrial Pulse Generation, Low-Power Digital Instrumentation, Legacy Control-System Counter
What is the CD4045BEX?
The CD4045BEX is a Harris Corporation CMOS counter IC containing 21 binary counter stages, two output-shaping flip-flops, two push-pull inverter output drivers, and input inverters. According to the manufacturer’s CD4045B information, the shaped output provides a 3.125% duty cycle, making the device suitable for frequency division, timing, and crystal-oscillator-related circuits.
How many counter stages does the CD4045BEX have?
The CD4045BEX has 21 counter stages, giving it a 21-bit binary counting structure. The counter advances on the negative edge of its clock input, while two additional flip-flops shape the resulting waveform. According to the manufacturer description, this architecture supports long frequency-division and timing intervals from a single clock source.
What package does CD4045BEX use?
The CD4045BEX is associated with a 16-pin plastic dual in-line package. The related Harris CD4045BE listing identifies the family as a 16-PDIP counter IC, establishing the package format for this device family. Use the CD4045B datasheet pin-description table when assigning PCB nets and keep the physical orientation consistent with the package drawing.
Where can I download the CD4045BEX datasheet PDF?
The manufacturer CD4045B datasheet can be accessed through the official Texas Instruments CD4045B datasheet link on this page. The Octopart datasheet entry for CD4045BEX also provides a document route for the Harris version. Confirm the ordering suffix and pin description against the cover and pin table before reusing an existing PCB.
Where can I find the CD4045BEX pinout?
The CD4045BEX pinout is found in the pin-description table of the manufacturer CD4045B datasheet. Because the exact terminal names and NC assignments are not shown on this page, use that table for each of the 16 package positions rather than inferring connections from counter-block diagrams. This avoids errors when CLOCK, RESET, SET, supply, and output functions are routed on a legacy board.
Can CD4045BEX be used for crystal-oscillator timing?
Yes, CD4045BEX is suitable for crystal-oscillator timing because its input inverters can support oscillator use and its counter stages provide extended division. The manufacturer specifically describes input inverters for use in a crystal oscillator. Actual time accuracy depends on crystal quality, oscillator loop design, supply stability, counter jitter, and the selected output stage.
Is CD4045BEX suitable for low-power digital equipment?
The CD4045BEX is suitable for low-power digital equipment because the manufacturer identifies battery operation and ultra-low dissipation as application requirements for the CD4000B family. Its CMOS implementation and 21-stage counter make it useful when a low-frequency timing signal must be derived from a compact crystal-based clock. Verify the exact operating-current limit and supply range in the datasheet.
What is the difference between CD4045BEX and CD4045BE?
The CD4045BEX and CD4045BE belong to the same Harris CD4045B counter family and share the 16-PDIP format and 21-stage counter architecture. The device-grade or temperature-grade distinction associated with the ordering suffix must be checked in the manufacturer ordering table before interchange. Do not substitute solely from the suffix when the system must meet a specific temperature requirement.
Can CD4045BE replace CD4045BEX in an existing circuit?
The Harris CD4045BE can be a candidate replacement for CD4045BEX when its ordering-grade temperature limits and operating specifications satisfy the application. Both devices are associated with the 16-PDIP CD4045B family, whose counter length is 21 stages and whose shaped-output duty cycle is 3.125%. Confirm pin functions, supply range, and temperature grade in the manufacturer documentation before production use.
What is the best drop-in replacement for CD4045BEX?
The best drop-in replacement must preserve the 16-pin dual in-line footprint, 21-stage counter, negative-edge counting behavior, and approximately 3.125% shaped-output duty cycle. Harris CD4045BE is the closest identified family option, while the Texas Instruments CD4045B family offers a second sourcing route. Verify the exact suffix, temperature range, and lifecycle requirements before approving either substitution.
Is a Texas Instruments CD4045B a drop-in alternative to CD4045BEX?
A Texas Instruments CD4045B can be considered for a drop-in design when the selected package suffix matches the Harris CD4045BEX footprint and the electrical limits satisfy the application. The device family has the same 21-stage counter architecture, negative-edge response, and 3.125% shaped-output duty cycle. Package and temperature-grade verification remains mandatory for an approved replacement.
When should I choose CD4045BEX instead of another CMOS counter?
Choose CD4045BEX when the design needs a 21-stage frequency divider, crystal-oscillator support through input inverters, and a narrow shaped output with a 3.125% duty cycle. It is particularly relevant to legacy 16-PDIP industrial and timing designs that must retain the established footprint. A generic counter is preferable when fewer stages, a different output duty cycle, or another package is required.
How much power does CD4045BEX dissipate?
CD4045BEX power consumption depends on supply voltage, clock activity, output loading, and the operating frequency. The manufacturer states that the CD4000B family is intended for equipment requiring ultra-low dissipation or battery operation, and notes that quiescent current is tested at 20 V. Use the datasheet current-versus-voltage and frequency conditions for a calculation specific to the design.
Where can I buy CD4045BEX and what is its lead time?
Use the Request a Quote form on this page to request CD4045BEX availability, current commercial terms, and lead time for the required quantity. The part is an older Harris Corporation catalog number, so production allocation and lifecycle status should be confirmed during quotation. XAIPART will confirm the exact suffix and requested packaging before accepting an order.
What are the key CD4045BEX specifications engineers should know?
The key CD4045BEX specifications are a 21-stage, 21-bit negative-edge counter, two output-shaping flip-flops, a 3.125% shaped-output duty cycle, two push-pull inverter output drivers, and input inverters. The manufacturer identifies 5 V, 10 V, 15 V, and 20 V parametric-test conditions. The device uses CMOS technology and is associated with a 16-pin plastic dual in-line package.

エンジニアリング参考データ: CD4045BEX — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose CD4045BEX for a legacy 16-PDIP design that requires a 21-stage negative-edge divider, two output-shaping flip-flops, and a 3.125% shaped-output duty cycle. It is especially relevant to crystal-based timing, long-delay generation, and pulse-producing circuits where maintaining the established Harris footprint is valuable. Select Harris CD4045BE when its specific device-grade and temperature limits satisfy the application and it offers the required lifecycle availability. Consider Texas Instruments CD4045B when its ordering suffix, package, temperature range, and qualification requirements match the target assembly. Neither identified alternative should be approved solely by the 16-PDIP designation: verify every pin, maximum clock frequency, supply limits, RESET behavior, and operating-temperature requirement. For a new design with a different division ratio, output duty cycle, or package, use a purpose-selected counter rather than forcing this legacy part into the design.

代替品との比較

パラメータ この製品 CD4045BE CD4045B
Package 16-PDIP 16-PDIP 16-PDIP
Brand Harris Corporation Harris Corporation Texas Instruments
Counter Stages 21 stages 21 stages 21 stages
Counter Width 21 bit 21 bit 21 bit
Counting Edge Negative edge Negative edge Negative edge
Output-Shaping Flip-Flops 2 flip-flops 2 flip-flops 2 flip-flops
Shaped Output Duty Cycle 3.125% 3.125% 3.125%
Output Driver Type Push-pull inverter output drivers Push-pull inverter output drivers Push-pull inverter output drivers

主な差別化要因

  • High division ratio in one counter package (vs CD4045BE)
  • Defined shaped-output waveform (vs CD4045BE)
  • Negative-edge counting with input inverter support (vs CD4045B)

設計ノート

Do not infer pin assignments from the internal counter block diagram. Assign CLOCK, SET, RESET, supply, counter-output, and shaped-output positions directly from the manufacturer pin-description table for the 16-PDIP package. Pay particular attention to unused inputs because an unterminated CMOS control input can introduce unpredictable current and state changes. Confirm which counter outputs are externally accessible before designing a divider ratio that depends on a particular stage.

Treat the CD4045BEX clock as a timing-critical node. Route it away from switching outputs and noisy analog stages, provide a short return path, and avoid long unprotected traces that can pick up pulse interference. The counter advances on the negative clock edge, so clock rise time, edge jitter, and ringing directly affect the divider timing. Validate the waveform at the device pin with sufficient bandwidth and margin for the full supply and temperature range.

Estimate total dissipation using the actual supply voltage, clock transition rate, load capacitance, and output duty cycle rather than relying only on quiescent current. The manufacturer identifies 5 V, 10 V, 15 V, and 20 V parametric conditions, showing that operating current depends on the supply condition. Include the clocked node in the power budget because frequent CMOS transitions can dominate consumption even when the counter is otherwise lightly loaded.

Place the counter close to the oscillator or timing source to minimize clock-node capacitance and susceptibility to edge distortion. Keep output traces short enough to limit capacitive loading on the push-pull drivers, and provide a direct ground return for all supply current. For a legacy replacement, verify component height, socket compatibility, notch orientation, and pin numbering against the physical board rather than relying only on the 16-PDIP package name.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The manufacturer states that the CD4045B meets the requirements of JEDEC Tentative Standard No. 13B for B-series CMOS devices. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are not stated for the exact CD4045BEX ordering code.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

CD4045BEX datasheet CD4045BEX pinout CD4045BEX datasheet pdf CD4045BEX equivalent CD4045BEX replacement CD4045BEX cross reference CD4045BEX footprint CD4045BEX price CD4045BEX stock Harris CD4045BEX CD4045B 21 stage counter CD4045BEX 16-PDIP CD4045BEX crystal oscillator CD4045BEX vs CD4045BE

関連部品&用語

Harris Corporation CD4045BEX CD4045BE CD4045B Texas Instruments CMOS counter binary counter frequency divider logic IC digital semiconductor 4000-series CMOS logic negative-edge counting output-shaping flip-flop push-pull output driver input inverter crystal oscillator 3.125% duty cycle 16-PDIP plastic dual in-line package JEDEC Tentative Standard No. 13B quiescent current battery-operated equipment
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示