Texas Instruments

CD4097BPW - 20V Differential 8:1 CMOS Multiplexer | TI

N.º de pieza: CD4097BPW ✗ Fin de vida
20 V Vdss 100 nA Id 240 ohm Rds(on) 24-pin TSSOP Package
MOQ: 1 |

CD4097BPW Descripción general

The Texas Instruments CD4097BPW is a 20 V differential 8:1 CMOS analog multiplexer and demultiplexer with two complementary switch paths, a 240 ohm on-state resistance, and a 24-pin TSSOP package. It routes one of eight analog inputs to paired outputs while providing the complementary output state, making it suitable for precision signal selection, instrumentation, industrial control, and test-equipment systems.

A CMOS analog multiplexer is an interface IC that connects one of several input terminals to a common output under digital address-control signals. A demultiplexer performs the reverse routing function. The CD4097B family combines both operating roles in one device, while its differential configuration provides two outputs whose states are opposite at any selected channel, allowing complementary, inverting, and non-inverting signal paths without duplicating external switching.

The principal electrical features include a 20 V maximum supply rating, an 8:1 configuration, approximately 240 ohm on-state resistance, and a leakage-current value shown as 100 nA in the part listing. The CD4097BPW ordering option uses a 24-pin TSSOP package. Its address inputs allow digital control systems to scan multiple sensors or route a single conditioning chain toward one of eight sources, reducing component count and simplifying synchronization.

CMOS construction supports low-power operation and high input impedance, which is valuable when the multiplexed sources include high-impedance sensors, amplifiers, or precision measurement nodes. The paired outputs are especially useful when a system requires a selected signal and its complement, such as in bridge excitation, differential excitation, or dual-polarity reference routing. The exact switching speed, channel capacitance, common-mode limits, and static current should be confirmed in the TI CD40x7B datasheet before final timing and signal-integrity analysis.

Typical uses include multiplexed data acquisition, sensor-channel selection, automated test systems, industrial measurement interfaces, and control systems that must share one amplifier or converter across several inputs. In these applications, the address logic can operate from a microcontroller or programmable logic controller while the analog section remains at a compatible supply voltage. Designers should account for off-channel isolation, charge injection, settling time, and the resistance of the selected path when specifying downstream gain and precision.

PCB implementation requires careful handling of high-impedance and low-level analog nodes. Place the multiplexer close to the signal sources or the first low-noise input stage, keep analog traces short, provide a stable ground reference, and decouple the supply close to the device. Avoid routing address and digital-control signals beneath sensitive analog nets where switching activity could couple into the measurement channel.

This page combines manufacturer specifications, practical interface guidance, application fit, and a conservative drop-in assessment. It also highlights where engineers must validate timing, leakage, analog settling, and lifecycle risk against the manufacturer datasheet and the specific signal-chain requirements.

Alternativas directas para CD4097BPW — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

CD4097BPW Especificaciones

Product Type Differential 8:1 CMOS analog multiplexer and demultiplexer
Number of Switch Circuits 2 circuits
Multiplexer Configuration 8:1
Maximum Supply Voltage 20 V
On-State Resistance 240 ohm
Leakage Current 100 nA
Tensión de alimentación 5 V
Encapsulado 24-pin TSSOP
Package Width 4.40 mm
Package Height 0.173 mm
Número de pines 24 pins
Tipo de montaje Surface mount
Logic Family CD4000B CMOS
Differential Outputs 2 complementary outputs
Multiplexing and Demultiplexing Multiplexer and demultiplexer operation
Estado RoHS RoHS compliant
Lead-Free Status Lead-free

Guía de configuración de pines de CD4097BPW 0.173 mm

Configuración de pines para CD4097BPW (encapsulado 0.173 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 0.173 mm para CD4097BPW

No hay datos detallados de patillaje disponibles para CD4097BPW.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

CD4097BPW es adecuado para 6 aplicacións: Multiplexed Data Acquisition, Industrial Sensor Channel Selection, Automated Test Equipment, Differential Bridge Excitation, Control-System Signal Routing, Precision Signal Conditioning.

📊

Multiplexed Data Acquisition

The CD4097BPW suits data-acquisition front ends that must select one of eight sensor or analog inputs and route it into a shared amplifier or converter. Its 8:1 configuration reduces the number of signal-chain inputs, while the differential outputs can support paired measurement routing. The 240 ohm on-state resistance must be included in the source-impedance and gain-error calculation. The TI CD40x7B datasheet should be used to confirm switching time, channel capacitance, charge injection, and isolation before setting the acquisition aperture.

🏭

Industrial Sensor Channel Selection

The CD4097BPW can scan eight high-impedance sensor outputs in industrial monitoring equipment while sharing one downstream signal-conditioning path. Its CMOS implementation and 100 nA listed leakage are relevant when source impedance is high, while the 20 V supply rating supports interface designs operating above low-voltage logic levels. Keep traces short, maintain a stable analog ground, and decouple the supply near the package. Validate the complete error budget because on-resistance, leakage, injection, and settling all influence low-level sensor accuracy.

🖥️

Automated Test Equipment

In automated test equipment, the CD4097BPW can route one of eight test points to a common measurement amplifier, comparator, or return channel. The complementary outputs allow the selected source and an opposite-polarity path to be presented together, which can simplify fixture interfaces and differential excitation. Address decoding should remain outside the sensitive analog region, and unused channels require appropriate handling according to the manufacturer guidance. Confirm switching settling before using the multiplexer near precision threshold measurements.

📡

Differential Bridge Excitation

The CD4097BPW's complementary output pair is useful in bridge and differential excitation systems where two opposite signal states are required during channel selection. It can alternate excitation routing without duplicating an entire eight-channel switching network. The design must account for the 240 ohm on-state resistance in excitation amplitude and settling, and the 100 nA leakage figure must remain small relative to the sensing circuit. Use a symmetric, low-impedance layout and consult the TI timing and application information before finalizing bridge excitation limits.

⚙️

Control-System Signal Routing

The CD4097BPW allows a microcontroller or programmable control system to choose among eight analog command or feedback signals without dedicating separate amplifiers to each route. The 8:1 architecture supports compact control panels, condition-monitoring controllers, and actuator-interface boards. Address outputs should be driven with compatible CMOS levels, and switching transients must not overlap critical control updates unless the acquisition and settling requirements permit it. The manufacturer timing diagram provides the basis for sequencing the address pins and changing channels.

🔧

Precision Signal Conditioning

The CD4097BPW can place one of eight conditioned inputs onto a shared low-noise amplifier or differential measurement chain, reducing component count while retaining selectable inputs. Its 240 ohm on-state resistance is small relative to many sensor-source impedances but remains relevant for high precision, and the listed 100 nA leakage must be included when calculating bias error. Place the device close to the amplifier input, use quiet supply decoupling, and isolate address traces from the analog path to minimize switching coupling.

What is the CD4097BPW?
The CD4097BPW is a 20 V, differential 8:1 CMOS analog multiplexer and demultiplexer with two switch circuits in a 24-pin TSSOP package. According to the TI CD40x7B CMOS Analog Multiplexers or Demultiplexers datasheet, Rev. D, it selects one of eight analog inputs and provides a complementary pair of outputs. This arrangement supports both multiplexing and demultiplexing functions while reducing the number of external routing components.
What are the key specifications of CD4097BPW that engineers should know?
The CD4097BPW combines a 20 V maximum supply rating, 8:1 multiplexing configuration, two switch circuits, 240 ohm on-state resistance, and a 24-pin TSSOP package. The TI product description identifies the device as a differential, one-channel analog multiplexer. The paired outputs can provide the selected channel and its complement, while the listed 100 nA leakage current is important when selecting the device for high-impedance measurement systems.
Where can I download the CD4097BPW datasheet PDF?
The CD4097BPW datasheet is available through the official TI CD4097B product page, which links to the CD40x7B CMOS Analog Multiplexers or Demultiplexers datasheet, Rev. D. The manufacturer product page is the preferred document source because it connects the PDF to current ordering, quality, and lifecycle information. Use the pin-description table and timing diagrams in that document when assigning PCB nets and calculating address-to-output settling.
Where can I find the CD4097BPW pinout?
The CD4097BPW pinout is defined in the TI CD40x7B datasheet, Rev. D, and its package drawing. The device is supplied in a 24-pin TSSOP package, so the complete package contains 24 pins. Use the manufacturer pin-description table when connecting the eight input channels, select and inhibit controls, address inputs, supply pins, and the complementary outputs rather than inferring connections from a generic multiplexer diagram.
Where can I buy CD4097BPW online?
The CD4097BPW can be requested through XAIPART's Request a Quote form on this page. Enter the exact CD4097BPW ordering code, required quantity, and target delivery location so the request can be matched to the appropriate supply channel. Because Texas Instruments identifies CD4097BPW as not recommended for new designs, confirm lifecycle requirements and whether an alternate TI ordering option better matches a long-term production plan.
What is the price of CD4097BPW?
The current CD4097BPW price is obtained through XAIPART's Request a Quote form on this page. The form captures the exact ordering code, quantity, and fulfillment requirements needed for a current quotation. Pricing should be reviewed at the time of quotation because market conditions, component availability, quantity, and lifecycle status can change the commercial result for a part that Texas Instruments lists as not recommended for new designs.
What is the lead time for CD4097BPW?
The current lead time for CD4097BPW should be requested through XAIPART's Request a Quote form on this page. Include your required quantity and requested delivery date in the inquiry. Since Texas Instruments marks CD4097BPW as not recommended for new designs, also state whether the order supports an existing product, a repair, or a new production release so the appropriate availability path can be evaluated.
Is CD4097BPW in stock?
CD4097BPW availability should be confirmed through XAIPART's Request a Quote form on this page rather than inferred from an online listing. Submit the exact MPN, quantity, and target schedule for a current stock and lead-time response. Texas Instruments lists CD4097BPW as not recommended for new designs, so existing-inventory status does not by itself indicate that the ordering option is appropriate for a new long-term design.
What can replace CD4097BPW?
No verified drop-in replacement for CD4097BPW can be confirmed from the cross-reference information currently associated with this part. A valid replacement must preserve the 24-pin TSSOP footprint, pin-to-pin signal assignments, differential 8:1 behavior, complementary outputs, logic levels, and essential electrical ratings. Use XAIPART's Request a Quote form to request an engineering review of current supply and approved replacement options.
Is CD4097BPW the same as CD4067BPW?
No. CD4067BPW is a 16-channel multiplexer, whereas CD4097BPW is an 8-channel differential multiplexer with two complementary outputs. The published comparison lists the configuration as 1×16 for CD4067BPW and 8:1 for CD4097BPW. Although both appear in TSSOP-24 packages, different channel counts and routing functions mean CD4067BPW is not a pin-for-pin drop-in replacement for CD4097BPW.
CD4097BPW vs 74FST3384DTR2 - which is better for an 8:1 analog multiplexer?
CD4097BPW is the closer functional choice when the circuit requires an 8:1 differential multiplexer with complementary outputs and a 20 V CMOS operating range. The comparison listing includes 74FST3384DTR2 as a related multiplexer candidate, but it does not establish pin-to-pin compatibility or identical differential-output behavior. Confirm the complete pin map, supply voltage, channel count, on-resistance, and logic thresholds before selecting it as a substitute.
When should I choose CD4097BPW over CD4067BPW?
Choose CD4097BPW when the design needs eight analog inputs, one selected channel, and two complementary outputs within a 20 V CMOS interface. Choose CD4067BPW instead when the circuit requires sixteen channels or a 16:1 multiplexing arrangement. The published configuration difference is fundamental: replacing an 8:1 differential multiplexer with a 16:1 device can change the required address logic, pin assignments, and system-level channel behavior.
Is CD4097BPW suitable for high-impedance sensor multiplexing?
CD4097BPW can be considered for high-impedance sensor multiplexing when its leakage, on-resistance, capacitance, injection, and settling characteristics satisfy the measurement accuracy budget. The device is a 20 V, 240 ohm, differential 8:1 CMOS multiplexer, and its listed 100 nA leakage is a relevant selection criterion. Keep sensitive traces short, provide solid grounding, and verify the complete acquisition timing against the TI datasheet.
What is the best cross-brand equivalent for CD4097BPW?
The best cross-brand equivalent cannot be designated without a verified, pin-compatible 24-pin TSSOP device with the same 8:1 differential routing and complementary-output behavior. The cross-reference search did not establish such a candidate. Similar functions such as CD4067BPW or 74FST3384DTR2 are not automatically drop-in replacements because channel count, logic levels, electrical ratings, and pin assignments may differ. Request a quote for a controlled replacement review.
What design considerations apply when using CD4097BPW in a data-acquisition system?
The principal design considerations are settling time, off-channel isolation, on-resistance, charge injection, leakage, supply noise, and digital-to-analog coupling. Keep the selected signal path short, place decoupling capacitors near the supply pins, maintain a low-impedance ground reference, and route address lines away from sensitive analog inputs. The TI CD40x7B datasheet, Rev. D, should be used to establish timing margins and acquisition error limits.

Datos de referencia de ingeniería para CD4097BPW — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose CD4097BPW when the design needs a CMOS 8:1 differential multiplexer with two complementary outputs, a 20 V maximum supply rating, and a 24-pin TSSOP interface. It is particularly useful for scanning eight sources into one measurement or conditioning chain, provided the 240 ohm on-state resistance, 100 nA leakage, switching time, and settling behavior fit the accuracy budget. CD4067BPW is appropriate when sixteen channels are required rather than eight complementary outputs. Consider a logic-level multiplexer only when its pinout, channel count, output architecture, and switching timing have been verified against the existing board. Texas Instruments marks CD4097BPW as not recommended for new designs, so an existing supported design may benefit from continuity, while a new production design should receive a formal lifecycle and alternate-part review before release.

Comparación con alternativas

Parámetro Este producto
Package 24-pin TSSOP
Brand Texas Instruments
Multiplexer Configuration 8:1 differential
Switch Circuits 2 circuits
Maximum Supply Voltage 20 V
On-State Resistance 240 ohm
Leakage Current 100 nA
Logic Family CD4000B CMOS
Lifecycle Status Not recommended for new designs

Diferenciadores clave

  • Provides paired complementary outputs in an 8:1 multiplexer (frente a CD4067BPW)
  • Supports a higher operating interface voltage than common low-voltage logic multiplexers (frente a 74FST3384DTR2)
  • Combines multiplexing and demultiplexing functions (frente a SN74CBTLV3384PWR)

Notas de diseño

Route the eight analog inputs and the two outputs as short, compact nets, especially when the source impedance is high or signal amplitudes are small. Place CD4097BPW near the shared amplifier or converter input rather than beside the system connector. Keep the address inputs and inhibit control away from sensitive analog traces. A solid, uninterrupted ground plane provides the lowest-impedance return path and reduces susceptibility to address-line coupling.

Follow the TI CD40x7B datasheet, Rev. D, for the permitted supply range and decoupling configuration. Place the required supply bypass capacitor close to the device's supply pins and provide an adequate return path to the ground pins. Avoid long supply loops through the analog section because the 240 ohm switch resistance is only one contributor to total measurement error; supply impedance and ground bounce can add further noise during address transitions.

Include off-channel isolation, charge injection, on-state resistance, leakage current, and output settling in the acquisition error budget. The listed 100 nA leakage is especially relevant to high-impedance sources, while the 240 ohm on-state resistance can create gain error when the source impedance is significant. Use the manufacturer timing diagrams to determine how long the address inputs must remain stable before the selected output is sampled.

Do not treat every 24-pin TSSOP multiplexer as a drop-in replacement. CD4067BPW has a 16:1 configuration rather than the CD4097BPW's 8:1 differential arrangement, while the listed 74FST3384DTR2 comparison does not establish identical pinout or complementary-output behavior. Verify the complete pin map, address truth table, logic thresholds, supply range, channel capacitance, and output architecture before approving any substitute.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Yes
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

A component listing identifies CD4097BPW as RoHS-compliant and lead-free. No additional REACH, halogen-free, conflict-minerals, or automotive qualification status is established for this ordering option.

Búsquedas relacionadas

CD4097BPW datasheet CD4097BPW datasheet pdf CD4097BPW pinout CD4097BPW equivalent CD4097BPW replacement CD4097BPW cross reference CD4097BPW vs CD4067BPW CD4097BPW 8:1 multiplexer CD4097BPW 20V TSSOP24 CD4097BPW sensor multiplexing CD4097BPW price Texas Instruments CD4097BPW CD4097BPW footprint CD4097BPW application circuit

Componentes & términos relacionados

Texas Instruments CD4097BPW CD4097B CD40x7B CMOS analog multiplexer CMOS analog demultiplexer differential multiplexer analog switch interface IC semiconductor 8:1 multiplexer complementary output on-state resistance leakage current charge injection TSSOP-24 TSSOP surface-mount package RoHS lead-free data acquisition industrial sensor multiplexing automated test equipment bridge excitation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ