DG405CY+ - Dual 45Ω Analog Switch | Analog Devices
N.º de pieza: DG405CY+ ✓ ActivoDG405CY+ Descripción general
An analog switch is a semiconductor interface that connects or disconnects analog signals under digital control. The DG405CY+ belongs to the analog switch and multiplexer hierarchy, where switches provide signal routing while multiplexers combine multiple inputs onto a shared output. Its low power consumption and rail-to-rail operation make it suitable for precision measurement, test equipment, communication systems, and industrial control circuits that route low-frequency or moderate-bandwidth signals.
The key feature of the DG405CY+ is its pair of independent 2:1 analog channels. A low on-resistance limits signal attenuation and distortion when the switch is closed, while the 30 Ω maximum on-resistance stated for the DG405 family provides a defined performance limit. Rail-to-rail signal handling allows signals to approach the supply rails, and TTL/CMOS-compatible control inputs simplify interfacing with digital controllers, counters, and field-programmable logic.
The improved DG405 family is specified with low on-resistance matching between switches, with a maximum matching value of 2 Ω, and low on-resistance flatness over the signal range, with a maximum value of 3 Ω. These characteristics reduce channel-to-channel and signal-level-dependent errors in instrumentation architectures. The manufacturer product page also identifies a typical on-resistance of 20 Ω for the redesigned family.
Typical applications include multiplexed sensor acquisition, automated test equipment, sample-and-hold signal paths, audio and communication routing, and industrial control interfaces. The dual-channel organization reduces the number of switch packages needed when two independently controlled routes are required. For designs requiring more inputs on one output, the DG419 family and related analog multiplexer products offer a different multiplexing architecture rather than a direct functional substitute for the DG405CY+.
Designers should account for the 45 Ω listed operating resistance and the maximum on-resistance variation when calculating insertion loss for high-impedance or precision analog nodes. Control logic must remain within the device's TTL and CMOS compatibility levels, and unused inputs should be connected according to the manufacturer pin-description table. PCB signal integrity also benefits from short routing, a continuous ground plane, and careful placement of any external protection or filtering components.
This product page combines the manufacturer specifications, distributor identification, pin-package details, application guidance, drop-in alternatives, and design considerations needed to evaluate the DG405CY+ before integrating it into an analog-routing design.
Alternativas directas para DG405CY+ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con DG405CY+ (mismo factor de forma y huella) — difiere en Package, Logic Compatibility, Off Leakage Current, On-Resistance.
DG405DY+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →DG405DY-T1-E3
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
DG403CY+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →DG401CY+
✅ Sustitución directaConsulte el precio
Ver hoja de datos →DG405CY+ Valores máximos y características eléctricas
| Number of Circuits | 2 circuits |
| Switch Configuration | 2:1 |
| On-Resistance | 45 Ω |
| Family Typical On-Resistance | 20 Ω |
| Maximum Low On-Resistance | 30 Ω |
| Maximum On-Resistance Matching | 2 Ω |
| Maximum On-Resistance Flatness | 3 Ω |
| Single-Supply Operating Range | +10 V to +30 V |
| Bipolar-Supply Operating Range | ±4.5 V to ±20 V |
| Maximum Power Consumption | 35 μW |
| Signal Handling | Rail-to-rail |
| Logic Compatibility | TTL/CMOS-compatible |
| Device Type | Improved dual high-speed analog switch |
| Encapsulado | 16-pin SOIC |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de DG405CY+ 16-pin soic
Configuración de pines para DG405CY+ (encapsulado 16-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para DG405CY+.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
DG405CY+ es adecuado para 6 aplicacións: Precision Sensor Multiplexing, Automated Test Equipment, Communication Signal Routing, Industrial Control Signal Multiplexing, Audio and Instrumentation Signal Paths, Data Acquisition Front Ends.
Precision Sensor Multiplexing
The DG405CY+ is well suited to routing sensor outputs in precision measurement systems because each of its two channels provides a 2:1 connection and the DG405 family limits on-resistance matching to 2 Ω and on-resistance flatness to 3 Ω. These characteristics help reduce errors when switching between closely related signals. Place the switch near the sensor inputs or multiplexer node to minimize PCB capacitance, and use a continuous ground plane to control return paths.
Recomendado
Automated Test Equipment
In automated test equipment, the DG405CY+ can connect test signals or instrumentation channels under digital control without introducing continuous signal-path loading. Its TTL/CMOS-compatible control inputs work with counters, processors, and programmable logic, while maximum power consumption of 35 μW limits the contribution of the switch itself to the power budget. Keep routing short and place return-path components close to the device to maintain predictable behavior at the system level.
Recomendado
Communication Signal Routing
The DG405CY+ can route moderate-bandwidth communication signals when insertion loss from the listed 45 Ω on-resistance remains acceptable. The dual 2:1 structure permits two independent routing decisions and reduces package count compared with separate single switches. Because the manufacturer identifies the DG405 family as improved and high-speed, engineers should still verify the required bandwidth, charge injection, and off-isolation limits against the system operating conditions before layout release.
Recomendado
Industrial Control Signal Multiplexing
The DG405CY+ fits industrial control boards that must select one of two signals per channel using TTL or CMOS-compatible control logic. Its dual-channel organization supports compact signal conditioning, and the specified 35 μW maximum power consumption is useful in distributed or low-power control systems. For production equipment, verify the selected ordering variant's operating-temperature limits and ensure transient protection does not inject signals outside the supported input and supply ranges.
Recomendado
Audio and Instrumentation Signal Paths
The DG405CY+ can serve as a signal-routing element in audio and instrumentation systems when the source impedance is sufficiently high for the resistance of the switch to have limited effect. The improved DG405 family's stated maximum on-resistance matching of 2 Ω and flatness of 3 Ω help preserve amplitude consistency between routes. Place the switch away from high-current return paths, use short traces, and verify distortion and off-isolation requirements in the finished circuit.
Recomendado
Data Acquisition Front Ends
The DG405CY+ can select between two input sources in a compact data-acquisition front end, particularly where the source impedance makes the switch resistance relatively minor. Its two channels provide independent 2:1 routing, while rail-to-rail handling supports signals across much of the supply range. Place the device after the source buffer and before the converter when possible, preserve a solid ground reference, and check settling behavior against the acquisition rate.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para DG405CY+ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | DG405DY+ | DG405DY-T1-E3 | DG403CY+ | DG401CY+ |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Vishay Intertechnology | Analog Devices | Analog Devices |
Diferenciadores clave
- Improved resistance matching for precision routing (frente a DG401CY+)
- Controlled on-resistance variation across the signal range (frente a DG403CY+)
- Dual 2:1 routing in a compact package (frente a DG405DY-T1-E3)
- Low power operation for portable and distributed systems (frente a DG401CY+)
Notas de diseño
Do not treat the distributor's 45 Ω on-resistance value as the only insertion-loss figure. The manufacturer describes 20 Ω typical and 30 Ω maximum low on-resistance for the improved DG405 family, while also specifying matching and flatness limits. Calculate worst-case attenuation from the actual on-resistance, source impedance, load impedance, and the switch state. A precision path may be affected more by resistance matching and flatness than by the nominal value alone.
Use the 16-pin SOIC footprint and assign every connection from the numbered DG405 manufacturer pin diagram. Keep the two analog routing nets short, provide an uninterrupted ground plane beneath the device, and place optional protection or filtering components close to the pins they serve. Avoid routing switched signals near high-current switching nodes. The dual 2:1 structure is useful for reducing package count, but adjacent sensitive routes still require deliberate spacing.
Validate settling time, off-isolation, crosstalk, and bandwidth in the completed signal path rather than assuming that a high-speed switch can carry every waveform. The 45 Ω resistance can form a meaningful divider with a high-impedance receiver or a low-impedance source, and parasitic capacitance can slow transitions. Use the manufacturer characterization conditions to select the correct operating mode and compare the resulting response with the downstream acquisition or conversion timing.
Design the supply rails for the full documented operating ranges of +10 V to +30 V in single-supply operation or ±4.5 V to ±20 V in bipolar operation. Decouple the supply pins according to the manufacturer application guidance and confirm that control levels remain valid at the selected voltage. Although maximum power consumption is specified as 35 μW, include control-driver current, external components, and leakage paths in the complete low-power design budget.
Información de cumplimiento
The official product page identifies the DG405 family as production, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated on the product record. AEC-Q100 is not applicable to this general-purpose analog switch.