Analog Devices

DG405CY+ - Dual 45Ω Analog Switch | Analog Devices

MPN: DG405CY+ ✓ فعال
+10 V to +30 V Vdss 45 Ω Rds(on) 16-pin SOIC Package
حداقل سفارش: 1 |

DG405CY+ نمای کلی

The Analog Devices DG405CY+ is an improved dual high-speed analog switch with two 2:1 channels, a specified 45 Ω on-resistance, rail-to-rail signal handling, and a 16-pin SOIC package. It operates from +10 V to +30 V in single-supply systems or from ±4.5 V to ±20 V in bipolar systems, with maximum power consumption listed as 35 μW. The device supports TTL and CMOS logic-compatible control signals.

An analog switch is a semiconductor interface that connects or disconnects analog signals under digital control. The DG405CY+ belongs to the analog switch and multiplexer hierarchy, where switches provide signal routing while multiplexers combine multiple inputs onto a shared output. Its low power consumption and rail-to-rail operation make it suitable for precision measurement, test equipment, communication systems, and industrial control circuits that route low-frequency or moderate-bandwidth signals.

The key feature of the DG405CY+ is its pair of independent 2:1 analog channels. A low on-resistance limits signal attenuation and distortion when the switch is closed, while the 30 Ω maximum on-resistance stated for the DG405 family provides a defined performance limit. Rail-to-rail signal handling allows signals to approach the supply rails, and TTL/CMOS-compatible control inputs simplify interfacing with digital controllers, counters, and field-programmable logic.

The improved DG405 family is specified with low on-resistance matching between switches, with a maximum matching value of 2 Ω, and low on-resistance flatness over the signal range, with a maximum value of 3 Ω. These characteristics reduce channel-to-channel and signal-level-dependent errors in instrumentation architectures. The manufacturer product page also identifies a typical on-resistance of 20 Ω for the redesigned family.

Typical applications include multiplexed sensor acquisition, automated test equipment, sample-and-hold signal paths, audio and communication routing, and industrial control interfaces. The dual-channel organization reduces the number of switch packages needed when two independently controlled routes are required. For designs requiring more inputs on one output, the DG419 family and related analog multiplexer products offer a different multiplexing architecture rather than a direct functional substitute for the DG405CY+.

Designers should account for the 45 Ω listed operating resistance and the maximum on-resistance variation when calculating insertion loss for high-impedance or precision analog nodes. Control logic must remain within the device's TTL and CMOS compatibility levels, and unused inputs should be connected according to the manufacturer pin-description table. PCB signal integrity also benefits from short routing, a continuous ground plane, and careful placement of any external protection or filtering components.

This product page combines the manufacturer specifications, distributor identification, pin-package details, application guidance, drop-in alternatives, and design considerations needed to evaluate the DG405CY+ before integrating it into an analog-routing design.

جایگزین‌های drop-in برای DG405CY+ — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای DG405CY+ (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Logic Compatibility, Off Leakage Current, On-Resistance.

Analog Devices
Package: 16-pin NSOIC
Off Leakage Current: <5 nA at +85°C
مقایسه با DG405CY+ →
Analog Devices
Package: 16-SOIC, N
Logic Compatibility: TTL and CMOS compatible
Off Leakage Current: 40 pA
مقایسه با DG405CY+ →

DG405DY+

✅ جایگزین مستقیم
Analog Devices
📦 16-SOIC
2 circuits · 2:1 · 45 Ohm · 20 Ohm · 44 V · 15 V · 40 pA · Less than 100 ns

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

DG405DY-T1-E3

✅ جایگزین مستقیم
📦 16-SOIC
Same 16-SOIC DG405-family footprint; manufacturer-specific temperature grade and qualification differences require verification

📋 جایگزین مرجع (خارج از کاتالوگ)

DG403CY+

✅ جایگزین مستقیم
Analog Devices
📦 16-SOIC
2 channels · 2 x SPDT · 45 ohm · 20 ohm · 2 ohm maximum · 3 ohm maximum · 15 pC · <5 nA at +85°C

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

DG401CY+

✅ جایگزین مستقیم
Maxim Integrated
📦 16-SOIC
2 · 1:1 · Dual SPST · 45 ohm · 150 ns · 100 ns · 500 pA · +10 V to +30 V

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

DG405CY+ حداکثر مقادیر مجاز و مشخصات الکتریکی

Number of Circuits 2 circuits
Switch Configuration 2:1
On-Resistance 45 Ω
Family Typical On-Resistance 20 Ω
Maximum Low On-Resistance 30 Ω
Maximum On-Resistance Matching 2 Ω
Maximum On-Resistance Flatness 3 Ω
Single-Supply Operating Range +10 V to +30 V
Bipolar-Supply Operating Range ±4.5 V to ±20 V
Maximum Power Consumption 35 μW
Signal Handling Rail-to-rail
Logic Compatibility TTL/CMOS-compatible
Device Type Improved dual high-speed analog switch
بسته‌بندی 16-pin SOIC
نوع نصب Surface mount

راهنمای پیکربندی پین DG405CY+ 16-pin soic

پیکربندی پین برای DG405CY+ (پکیج 16-pin soic). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-pin soic برای DG405CY+

داده پین‌آوت تفصیلی موجود نیست برای DG405CY+.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

DG405CY+ مناسب است برای 6 کاربردs: Precision Sensor Multiplexing, Automated Test Equipment, Communication Signal Routing, Industrial Control Signal Multiplexing, Audio and Instrumentation Signal Paths, Data Acquisition Front Ends.

📡

Precision Sensor Multiplexing

The DG405CY+ is well suited to routing sensor outputs in precision measurement systems because each of its two channels provides a 2:1 connection and the DG405 family limits on-resistance matching to 2 Ω and on-resistance flatness to 3 Ω. These characteristics help reduce errors when switching between closely related signals. Place the switch near the sensor inputs or multiplexer node to minimize PCB capacitance, and use a continuous ground plane to control return paths.

🖥️

Automated Test Equipment

In automated test equipment, the DG405CY+ can connect test signals or instrumentation channels under digital control without introducing continuous signal-path loading. Its TTL/CMOS-compatible control inputs work with counters, processors, and programmable logic, while maximum power consumption of 35 μW limits the contribution of the switch itself to the power budget. Keep routing short and place return-path components close to the device to maintain predictable behavior at the system level.

🌐

Communication Signal Routing

The DG405CY+ can route moderate-bandwidth communication signals when insertion loss from the listed 45 Ω on-resistance remains acceptable. The dual 2:1 structure permits two independent routing decisions and reduces package count compared with separate single switches. Because the manufacturer identifies the DG405 family as improved and high-speed, engineers should still verify the required bandwidth, charge injection, and off-isolation limits against the system operating conditions before layout release.

🏭

Industrial Control Signal Multiplexing

The DG405CY+ fits industrial control boards that must select one of two signals per channel using TTL or CMOS-compatible control logic. Its dual-channel organization supports compact signal conditioning, and the specified 35 μW maximum power consumption is useful in distributed or low-power control systems. For production equipment, verify the selected ordering variant's operating-temperature limits and ensure transient protection does not inject signals outside the supported input and supply ranges.

🎧

Audio and Instrumentation Signal Paths

The DG405CY+ can serve as a signal-routing element in audio and instrumentation systems when the source impedance is sufficiently high for the resistance of the switch to have limited effect. The improved DG405 family's stated maximum on-resistance matching of 2 Ω and flatness of 3 Ω help preserve amplitude consistency between routes. Place the switch away from high-current return paths, use short traces, and verify distortion and off-isolation requirements in the finished circuit.

📊

Data Acquisition Front Ends

The DG405CY+ can select between two input sources in a compact data-acquisition front end, particularly where the source impedance makes the switch resistance relatively minor. Its two channels provide independent 2:1 routing, while rail-to-rail handling supports signals across much of the supply range. Place the device after the source buffer and before the converter when possible, preserve a solid ground reference, and check settling behavior against the acquisition rate.

What is the DG405CY+?
The DG405CY+ is an improved dual high-speed analog switch manufactured by Analog Devices. It contains two independently controlled 2:1 channels in a 16-pin SOIC package and is specified with a 45 Ω on-resistance according to the distributor listing. According to the manufacturer DG405 data sheet, the family supports rail-to-rail signal handling, TTL/CMOS-compatible control signals, and low power consumption.
What are the key specifications of DG405CY+?
The DG405CY+ is a 2-circuit, 2:1 analog switch in a 16-pin SOIC package with a listed 45 Ω on-resistance. According to the Analog Devices DG405 documentation, the redesigned family provides a 20 Ω typical on-resistance, a 30 Ω maximum low on-resistance, no more than 2 Ω on-resistance matching, and no more than 3 Ω on-resistance flatness. Its supply ranges are +10 V to +30 V or ±4.5 V to ±20 V.
What is the operating voltage range of DG405CY+?
The DG405CY+ operates from +10 V to +30 V in a single-supply configuration or from ±4.5 V to ±20 V when powered from bipolar supplies. The manufacturer DG405 data sheet identifies these supply ranges and states that the device provides rail-to-rail signal handling. Confirm that every routed signal remains within the voltage limits permitted for the selected configuration before finalizing the circuit.
Where can I download the DG405CY+ datasheet PDF?
The official DG405 documentation is available from Analog Devices at https://www.analog.com/en/products/dg405.html, where the DG405 product page links to the manufacturer data sheet. The DG405CY+ is listed under the DG405 family, and the manufacturer identifies the document as Data Sheet Rev. 2. Use the pin-description and electrical-characteristics tables for final footprint, voltage, control-level, and switching-performance decisions.
Where can I find the DG405CY+ pinout?
The DG405CY+ pinout should be taken from the pin-description table in the Analog Devices DG405 manufacturer data sheet, Rev. 2, linked from the official product page. The component is supplied in a 16-pin SOIC package. Assign PCB connections using the numbered pins and signal names shown there, including control inputs, common terminals, switched terminals, and any no-connect positions specified by the manufacturer.
Is DG405CY+ suitable for TTL and CMOS control signals?
Yes. The DG405CY+ is specified as compatible with TTL and CMOS logic, allowing its digital control inputs to be driven by common counters, microcontrollers, field-programmable logic, and other digital control devices. According to the manufacturer DG405 data sheet, rail-to-rail signal handling is also supported. Validate the actual control high and low levels against the electrical-characteristics table for the selected supply voltage.
How much power does DG405CY+ consume?
The DG405CY+ has a maximum listed power consumption of 35 μW, as stated in the DG405 manufacturer data sheet. This low figure reflects the CMOS-style switching architecture and is valuable in battery-operated or space-constrained systems. Actual system consumption depends on supply voltage, control states, signal levels, and the number of enabled channels, so designers should calculate the complete circuit budget rather than treating 35 μW as the entire board consumption.
DG405CY+ vs DG401CY+ - which is better for precision routing?
Choose the DG405CY+ when low on-resistance variation and flatness are more important than the lower-cost or lower-resistance characteristics of another DG40-series switch. The manufacturer identifies maximum on-resistance matching of 2 Ω and maximum flatness of 3 Ω for the improved DG405 family. Choose a DG401CY+ only after comparing its exact electrical characteristics with the signal amplitude, source impedance, and required accuracy of the target application.
What is the difference between DG405CY+ and DG403CY+?
The DG405CY+ is the DG405 family member listed with a 45 Ω on-resistance, while the DG403CY+ belongs to a related analog-switch family with different resistance and switching characteristics. Both use a 16-pin SOIC-style package, but matching the package alone does not establish equivalent performance. Review the manufacturer electrical-characteristics tables for the DG405 and DG403 families before selecting either part for precision signal paths.
When should I choose DG405CY+ over a DG40-series alternative?
Choose the DG405CY+ when an application benefits from the improved DG405 family's specified on-resistance matching and flatness. Maximum matching of 2 Ω and maximum flatness of 3 Ω are meaningful when routing low-level, precision signals through multiple switch states. Select another compatible DG40-series device when its verified electrical characteristics better match impedance, speed, supply, or cost requirements.
Is DG405CY+ suitable for industrial control and instrumentation?
Yes, the DG405CY+ is suitable for many industrial control and instrumentation signal-routing tasks because it combines two 2:1 channels, low power consumption, TTL/CMOS-compatible controls, and rail-to-rail signal handling. Its 16-pin SOIC package supports compact board layouts. For factory equipment, verify the exact operating-temperature grade, isolation requirements, and system electromagnetic-emissions constraints before releasing a production design.
What is the best drop-in replacement for DG405CY+?
The closest same-brand drop-in choices identified for the DG405CY+ are the DG405DY+, DG405DY-T1-E3, DG403CY+, and DG401CY+, subject to verifying the exact pinout and electrical ratings. The DG405DY+ retains the DG405 family architecture, while DG403CY+ and DG401CY+ are related same-package devices with different parameters. No alternative should be approved solely from package appearance; compare every datasheet limit and control threshold.
Can DG405DY+ replace DG405CY+ without changing the PCB?
The DG405DY+ can be considered a board-compatible option when its manufacturer pinout matches the DG405CY+ and its electrical limits satisfy the design. Both are identified as 16-pin SOIC devices in the DG405 family, but temperature grade, marking, and ordering details must be confirmed. Perform a complete pin-function and electrical comparison before treating it as a drop-in replacement.
What can replace DG405CY+?
Compatible replacements must use the same 16-pin SOIC footprint and preserve the control-pin, common-terminal, and switched-terminal assignments of the DG405CY+. The identified candidates include the DG405DY+, DG405DY-T1-E3, DG403CY+, and DG401CY+, but each has different voltage or resistance characteristics. Use the manufacturer comparison tables to confirm that on-resistance, bandwidth, logic levels, and supply limits remain acceptable.
Where to buy DG405CY+ online?
Use the Request a Quote form on this page to request DG405CY+ availability, current lead time, and a formal quotation for the required quantity and package format. The Analog Devices product page identifies the DG405 family as production, and distributor listings identify DG405CY+ as a 16-SOIC analog switch. Share your target quantity, delivery location, and traceability requirements with the quote team for an accurate response.
What is the price of DG405CY+?
Submit a Request a Quote for DG405CY+ through the form on this page to obtain a current quotation for the requested quantity. No qualifying quantity-break price list is published on this product record, so a fixed commercial figure should not be assumed. Include the required quantity, shipment destination, and any date-sensitive production schedule when requesting the quotation.
What is the lead time and stock status of DG405CY+?
Request the current DG405CY+ lead time and stock allocation through the Request a Quote form on this page. The Analog Devices product page identifies the DG405 family as production, while distributor records do not establish a guaranteed allocation for every order. Providing the required quantity and target delivery date allows the quote team to confirm the appropriate sourcing path and schedule.

داده‌های مرجع مهندسی برای DG405CY+ — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the DG405CY+ when the design needs two independent 2:1 routes in a 16-pin SOIC package and benefits from the improved DG405 family's stated on-resistance matching and flatness. It is particularly appropriate for precision instrumentation, automated test systems, and low-power control boards where TTL/CMOS-compatible control and maximum 35 μW power consumption are important. Consider the DG405DY+ when its specific ordering and temperature grade meet the production requirements while retaining the DG405-family architecture. Evaluate the Vishay Intertechnology DG405DY-T1-E3 as a board-compatible sourcing option after checking its pin functions, voltage limits, temperature grade, and lifecycle status. Use the DG403CY+ or DG401CY+ only when their lower-cost or other family characteristics meet the signal-path requirements and their manufacturer data confirm acceptable on-resistance, speed, and isolation. Package equivalence alone does not guarantee functional equivalence, so approve a replacement only after comparing the complete electrical-characteristics and absolute-maximum-rating tables.

مقایسه با جایگزین‌ها

پارامتر این محصول DG405DY+ DG405DY-T1-E3 DG403CY+ DG401CY+
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Vishay Intertechnology Analog Devices Analog Devices

تفاوت‌های کلیدی

  • Improved resistance matching for precision routing (در مقابلDG401CY+)
  • Controlled on-resistance variation across the signal range (در مقابلDG403CY+)
  • Dual 2:1 routing in a compact package (در مقابلDG405DY-T1-E3)
  • Low power operation for portable and distributed systems (در مقابلDG401CY+)

یادداشت‌های طراحی

Do not treat the distributor's 45 Ω on-resistance value as the only insertion-loss figure. The manufacturer describes 20 Ω typical and 30 Ω maximum low on-resistance for the improved DG405 family, while also specifying matching and flatness limits. Calculate worst-case attenuation from the actual on-resistance, source impedance, load impedance, and the switch state. A precision path may be affected more by resistance matching and flatness than by the nominal value alone.

Use the 16-pin SOIC footprint and assign every connection from the numbered DG405 manufacturer pin diagram. Keep the two analog routing nets short, provide an uninterrupted ground plane beneath the device, and place optional protection or filtering components close to the pins they serve. Avoid routing switched signals near high-current switching nodes. The dual 2:1 structure is useful for reducing package count, but adjacent sensitive routes still require deliberate spacing.

Validate settling time, off-isolation, crosstalk, and bandwidth in the completed signal path rather than assuming that a high-speed switch can carry every waveform. The 45 Ω resistance can form a meaningful divider with a high-impedance receiver or a low-impedance source, and parasitic capacitance can slow transitions. Use the manufacturer characterization conditions to select the correct operating mode and compare the resulting response with the downstream acquisition or conversion timing.

Design the supply rails for the full documented operating ranges of +10 V to +30 V in single-supply operation or ±4.5 V to ±20 V in bipolar operation. Decouple the supply pins according to the manufacturer application guidance and confirm that control levels remain valid at the selected voltage. Although maximum power consumption is specified as 35 μW, include control-driver current, external components, and leakage paths in the complete low-power design budget.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The official product page identifies the DG405 family as production, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated on the product record. AEC-Q100 is not applicable to this general-purpose analog switch.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

DG405CY+ datasheet DG405CY+ datasheet pdf DG405CY+ pinout DG405CY+ specifications Analog Devices DG405CY+ DG405CY+ 16-SOIC DG405CY+ equivalent DG405CY+ replacement DG405CY+ vs DG405DY+ DG405CY+ price DG405CY+ stock DG405CY+ analog switch application DG405CY+ footprint DG405CY+ schematic

قطعات و اصطلاحات مرتبط

Analog Devices Maxim Integrated DG405CY+ DG405 DG405DY+ DG405DY-T1-E3 DG403CY+ DG401CY+ analog switch analog multiplexer interface IC semiconductor 2:1 switch on-resistance rail-to-rail signal handling TTL CMOS 16-pin SOIC SOIC family surface-mount package precision instrumentation automated test equipment industrial control signal routing DG419DY+
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ