DG405CY+ - Dual 45Ω Analog Switch | Analog Devices
MPN: DG405CY+ ✓ 啟用中DG405CY+ 概覽
An analog switch is a semiconductor interface that connects or disconnects analog signals under digital control. The DG405CY+ belongs to the analog switch and multiplexer hierarchy, where switches provide signal routing while multiplexers combine multiple inputs onto a shared output. Its low power consumption and rail-to-rail operation make it suitable for precision measurement, test equipment, communication systems, and industrial control circuits that route low-frequency or moderate-bandwidth signals.
The key feature of the DG405CY+ is its pair of independent 2:1 analog channels. A low on-resistance limits signal attenuation and distortion when the switch is closed, while the 30 Ω maximum on-resistance stated for the DG405 family provides a defined performance limit. Rail-to-rail signal handling allows signals to approach the supply rails, and TTL/CMOS-compatible control inputs simplify interfacing with digital controllers, counters, and field-programmable logic.
The improved DG405 family is specified with low on-resistance matching between switches, with a maximum matching value of 2 Ω, and low on-resistance flatness over the signal range, with a maximum value of 3 Ω. These characteristics reduce channel-to-channel and signal-level-dependent errors in instrumentation architectures. The manufacturer product page also identifies a typical on-resistance of 20 Ω for the redesigned family.
Typical applications include multiplexed sensor acquisition, automated test equipment, sample-and-hold signal paths, audio and communication routing, and industrial control interfaces. The dual-channel organization reduces the number of switch packages needed when two independently controlled routes are required. For designs requiring more inputs on one output, the DG419 family and related analog multiplexer products offer a different multiplexing architecture rather than a direct functional substitute for the DG405CY+.
Designers should account for the 45 Ω listed operating resistance and the maximum on-resistance variation when calculating insertion loss for high-impedance or precision analog nodes. Control logic must remain within the device's TTL and CMOS compatibility levels, and unused inputs should be connected according to the manufacturer pin-description table. PCB signal integrity also benefits from short routing, a continuous ground plane, and careful placement of any external protection or filtering components.
This product page combines the manufacturer specifications, distributor identification, pin-package details, application guidance, drop-in alternatives, and design considerations needed to evaluate the DG405CY+ before integrating it into an analog-routing design.
直接替換替代品,適用於 DG405CY+ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: DG405CY+ (相同外形與佔位) — 差異在於 Package, Logic Compatibility, Off Leakage Current, On-Resistance.
DG405DY+
✅ 直接替換聯絡詢價
查看資料表 →DG405DY-T1-E3
✅ 直接替換📋 參考替代品(不在目錄中)
DG405CY+ 最大額定值與電氣特性
| Number of Circuits | 2 circuits |
| Switch Configuration | 2:1 |
| On-Resistance | 45 Ω |
| Family Typical On-Resistance | 20 Ω |
| Maximum Low On-Resistance | 30 Ω |
| Maximum On-Resistance Matching | 2 Ω |
| Maximum On-Resistance Flatness | 3 Ω |
| Single-Supply Operating Range | +10 V to +30 V |
| Bipolar-Supply Operating Range | ±4.5 V to ±20 V |
| Maximum Power Consumption | 35 μW |
| Signal Handling | Rail-to-rail |
| Logic Compatibility | TTL/CMOS-compatible |
| Device Type | Improved dual high-speed analog switch |
| 封裝 | 16-pin SOIC |
| 安裝類型 | Surface mount |
DG405CY+ 16-pin soic 腳位配置指南
DG405CY+(16-pin soic 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: DG405CY+.
請參閱 資料表 以查看完整腳位配置。
典型應用
DG405CY+ 適用於 6 應用s: Precision Sensor Multiplexing, Automated Test Equipment, Communication Signal Routing, Industrial Control Signal Multiplexing, Audio and Instrumentation Signal Paths, Data Acquisition Front Ends.
Precision Sensor Multiplexing
The DG405CY+ is well suited to routing sensor outputs in precision measurement systems because each of its two channels provides a 2:1 connection and the DG405 family limits on-resistance matching to 2 Ω and on-resistance flatness to 3 Ω. These characteristics help reduce errors when switching between closely related signals. Place the switch near the sensor inputs or multiplexer node to minimize PCB capacitance, and use a continuous ground plane to control return paths.
推薦
Automated Test Equipment
In automated test equipment, the DG405CY+ can connect test signals or instrumentation channels under digital control without introducing continuous signal-path loading. Its TTL/CMOS-compatible control inputs work with counters, processors, and programmable logic, while maximum power consumption of 35 μW limits the contribution of the switch itself to the power budget. Keep routing short and place return-path components close to the device to maintain predictable behavior at the system level.
推薦
Communication Signal Routing
The DG405CY+ can route moderate-bandwidth communication signals when insertion loss from the listed 45 Ω on-resistance remains acceptable. The dual 2:1 structure permits two independent routing decisions and reduces package count compared with separate single switches. Because the manufacturer identifies the DG405 family as improved and high-speed, engineers should still verify the required bandwidth, charge injection, and off-isolation limits against the system operating conditions before layout release.
推薦
Industrial Control Signal Multiplexing
The DG405CY+ fits industrial control boards that must select one of two signals per channel using TTL or CMOS-compatible control logic. Its dual-channel organization supports compact signal conditioning, and the specified 35 μW maximum power consumption is useful in distributed or low-power control systems. For production equipment, verify the selected ordering variant's operating-temperature limits and ensure transient protection does not inject signals outside the supported input and supply ranges.
推薦
Audio and Instrumentation Signal Paths
The DG405CY+ can serve as a signal-routing element in audio and instrumentation systems when the source impedance is sufficiently high for the resistance of the switch to have limited effect. The improved DG405 family's stated maximum on-resistance matching of 2 Ω and flatness of 3 Ω help preserve amplitude consistency between routes. Place the switch away from high-current return paths, use short traces, and verify distortion and off-isolation requirements in the finished circuit.
推薦
Data Acquisition Front Ends
The DG405CY+ can select between two input sources in a compact data-acquisition front end, particularly where the source impedance makes the switch resistance relatively minor. Its two channels provide independent 2:1 routing, while rail-to-rail handling supports signals across much of the supply range. Place the device after the source buffer and before the converter when possible, preserve a solid ground reference, and check settling behavior against the acquisition rate.
推薦
推薦產品摘要
工程參考資料,適用於 DG405CY+ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | DG405DY+ | DG405DY-T1-E3 | DG403CY+ | DG401CY+ |
|---|---|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Analog Devices | Analog Devices | Vishay Intertechnology | Analog Devices | Analog Devices |
主要差異化特點
- Improved resistance matching for precision routing (對比DG401CY+)
- Controlled on-resistance variation across the signal range (對比DG403CY+)
- Dual 2:1 routing in a compact package (對比DG405DY-T1-E3)
- Low power operation for portable and distributed systems (對比DG401CY+)
設計說明
Do not treat the distributor's 45 Ω on-resistance value as the only insertion-loss figure. The manufacturer describes 20 Ω typical and 30 Ω maximum low on-resistance for the improved DG405 family, while also specifying matching and flatness limits. Calculate worst-case attenuation from the actual on-resistance, source impedance, load impedance, and the switch state. A precision path may be affected more by resistance matching and flatness than by the nominal value alone.
Use the 16-pin SOIC footprint and assign every connection from the numbered DG405 manufacturer pin diagram. Keep the two analog routing nets short, provide an uninterrupted ground plane beneath the device, and place optional protection or filtering components close to the pins they serve. Avoid routing switched signals near high-current switching nodes. The dual 2:1 structure is useful for reducing package count, but adjacent sensitive routes still require deliberate spacing.
Validate settling time, off-isolation, crosstalk, and bandwidth in the completed signal path rather than assuming that a high-speed switch can carry every waveform. The 45 Ω resistance can form a meaningful divider with a high-impedance receiver or a low-impedance source, and parasitic capacitance can slow transitions. Use the manufacturer characterization conditions to select the correct operating mode and compare the resulting response with the downstream acquisition or conversion timing.
Design the supply rails for the full documented operating ranges of +10 V to +30 V in single-supply operation or ±4.5 V to ±20 V in bipolar operation. Decouple the supply pins according to the manufacturer application guidance and confirm that control levels remain valid at the selected voltage. Although maximum power consumption is specified as 35 μW, include control-driver current, external components, and leakage paths in the complete low-power design budget.
合規資訊
The official product page identifies the DG405 family as production, but no specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated on the product record. AEC-Q100 is not applicable to this general-purpose analog switch.