DS90LV032ATMX - 400 Mbps Quad LVDS Receiver | Texas Instruments
N.º de pieza: DS90LV032ATMX ✗ Fin de vidaDS90LV032ATMX Descripción general
An LVDS receiver is an interface circuit that detects the voltage difference between two complementary low-voltage differential signals. This differential detection improves noise immunity and allows reliable communication over balanced interconnects. The DS90LV032A belongs to the broader LVDS interface IC family, where a quad receiver provides four independent differential input channels and four CMOS output channels.
The device supports signaling rates above 400 Mbps and uses a 3.3 V supply. Its CMOS outputs are designed for use with digital logic operating at compatible voltage levels. Four receivers are integrated in one package, reducing component count and board area compared with discrete single-channel receiver implementations. The 16-SOIC package is suitable for conventional surface-mount assembly.
The differential architecture is important in systems where common-mode voltage and externally coupled noise could disturb a single-ended signal path. A 350 mV typical differential input is evaluated relative to the complementary pair, so the receiver can distinguish the intended data transition from noise common to both conductors. The resulting CMOS signals can be routed into counters, controllers, FPGAs, or other digital processing blocks.
Typical applications include high-speed point-to-point data links, communications equipment, industrial control systems, test and measurement instruments, and backplanes requiring a low-power differential receiver. The device can also work with a compatible driver such as the DS90LV031A when both ends of the link use the same LVDS signaling convention.
PCB implementation should preserve the balanced geometry of each LVDS pair and provide a solid ground reference. Place the receiver close to the connector or transceiver when trace length is short, while observing the manufacturer’s input and supply-layout guidance when routing across a larger board.
This product page combines manufacturer electrical characteristics, package details, application guidance, and drop-in alternative analysis to support component selection and PCB planning. For obsolete inventory, current availability, and project-specific sourcing, use the Request a Quote form on this page.
Alternativas directas para DS90LV032ATMX — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con DS90LV032ATMX (mismo factor de forma y huella) — difiere en Package, Maximum Data Rate, Operating Temperature Range, Device Type, Technology.
DS90LV032ATMX/NOPB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
DS90LV032ATM/NOPB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
DS26LV32ATM
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
SN65LVDS32D
✅ Sustitución directaConsulte el precio
Ver hoja de datos →PI90LV032AWE
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
DS90LV027ATM
✅ Sustitución directaConsulte el precio
Ver hoja de datos →DS90LV032ATMX Especificaciones
| Product Type | Quad CMOS differential line receiver |
| Receiver Count | 4 receivers |
| Technology | Low-Voltage Differential Signaling (LVDS) |
| Maximum Data Rate | Greater than 400 Mbps |
| Maximum Signaling Frequency | 200 MHz |
| Typical Differential Input Voltage | 350 mV |
| Tensión de alimentación | 3.3 V |
| Tipo de salida | 3 V CMOS |
| Number of Differential Input Channels | 4 channels |
| Number of Output Channels | 4 channels |
| Encapsulado | 16-SOIC |
| Tipo de montaje | Surface mount |
| Rango de temperatura de funcionamiento | -40°C to +85°C |
Guía de configuración de pines de DS90LV032ATMX 16-soic
Configuración de pines para DS90LV032ATMX (encapsulado 16-soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para DS90LV032ATMX.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
DS90LV032ATMX es adecuado para 6 aplicacións: High-Speed Point-to-Point LVDS Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Communications and Backplane Interfaces, FPGA and Digital Logic Interfacing, Legacy Equipment Repair and Obsolescence Management.
High-Speed Point-to-Point LVDS Links
The DS90LV032ATMX is suitable for a point-to-point link requiring as many as four independent LVDS channels. According to the Texas Instruments DS90LV032A datasheet, the receiver supports data rates in excess of 400 Mbps at 200 MHz and detects a typical 350 mV differential input. Place the receiver at the receiving end of each balanced pair and route the four CMOS outputs into counters, controllers, FPGAs, or test equipment. The 16-SOIC package consolidates four receivers while maintaining compatibility with conventional surface-mount assembly. Interconnect length, connector return paths, driver configuration, and receiver enable states must be validated together because the receiver specification alone does not determine total link margin.
Recomendado
Industrial Control and Data Acquisition
The four-channel DS90LV032ATMX can receive synchronized or independent differential signals in industrial control and data-acquisition equipment. Its support for more than 400 Mbps provides ample link capacity for sensor data, machine-state information, and command traffic, while the 3 V CMOS outputs simplify connection to 3.3 V digital logic. According to the Texas Instruments DS90LV032A datasheet, each channel detects a typical 350 mV differential input. A practical implementation should preserve pair symmetry, provide a continuous ground reference, and avoid routing LVDS signals across noisy power-converter regions. Any isolation boundary, long cable, or protective device also changes the channel budget and should be reviewed as part of the complete interface design.
Recomendado
Test and Measurement Equipment
DS90LV032ATMX is appropriate for test and measurement instruments that must recover low-amplitude differential signals delivered over a cable or controlled PCB interconnect. The receiver’s typical 350 mV differential sensitivity and operation above 400 Mbps support high-speed transfer between a remote instrument head and a processing backplane. According to the Texas Instruments DS90LV032A product page, the family was created as a lower-power alternative to high-power PECL or ECL interfaces. Use controlled-impedance routing, a proper reference plane, and the manufacturer’s input guidance when working near high-gain analog sections. An FPGA or microcontroller can then consume the CMOS outputs, provided its input thresholds and timing requirements are compatible.
Recomendado
Communications and Backplane Interfaces
The DS90LV032ATMX can be used in communications equipment for balanced point-to-point links that require multiple low-voltage data channels. Its 400 Mbps-class capability and four integrated receivers provide a compact path between a line-card transmitter and a digital processor. The differential receiving method improves common-noise rejection compared with a single-ended input, provided the PCB maintains matched trace geometry and a nearby ground reference. According to the Texas Instruments DS90LV032A datasheet, the device converts a typical 350 mV differential signal into a 3 V CMOS output. Designers should evaluate the companion driver, connector return pins, cable characteristics, and any equalization or termination requirements before releasing the board layout.
Recomendado
FPGA and Digital Logic Interfacing
The DS90LV032ATMX is well suited to converting four LVDS pairs into CMOS signals for an FPGA, controller, or digital ASIC. Its 200 MHz signaling capability and 3.3 V supply align with common 3.3 V digital power domains, reducing the number of external receiver components. According to the Texas Instruments DS90LV032A datasheet, the differential input sensitivity is 350 mV typical and data rates can exceed 400 Mbps. The design should account for receiver-to-PCB trace length, output timing relative to the FPGA clock, and the enable or shutdown state during power sequencing. Confirm the exact pin configuration from the manufacturer datasheet and validate timing with the actual receiver and downstream device rather than relying only on aggregate signaling-rate figures.
Recomendado
Legacy Equipment Repair and Obsolescence Management
DS90LV032ATMX provides a practical option for repairing or sustaining equipment built around the classic DS90LV032A quad receiver. The device’s 16-SOIC footprint and four-channel architecture make it relevant when an installed board already has routing and interface timing designed around this family. According to Texas Instruments cross-reference information, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are identified as the closest qualified second-source options. A repair should still compare exact enable polarity, temperature grade, receiver thresholds, and propagation delay before installation. Preserving the original footprint reduces board rework, while production-equivalent sourcing and inspection requirements should be handled through the Request a Quote form for obsolete inventory.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para DS90LV032ATMX — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | DS90LV032ATMX/NOPB | DS90LV032ATM/NOPB | DS26LV32ATM | SN65LVDS32D | PI90LV032AWE |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Receiver Count | 4 receivers | 4 receivers | 4 receivers | 4 receivers | 4 receivers | 4 receivers |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | Not stated | Not stated | Not stated |
| Signaling Technology | LVDS | LVDS | LVDS | Differential line receiver | LVDS | LVDS |
| Maximum Data Rate | Greater than 400 Mbps | 400 Mbps | 400 Mbps | Not stated | Not stated | Not stated |
| Maximum Signaling Frequency | 200 MHz | Not stated | Not stated | Not stated | Not stated | Not stated |
| Typical Differential Input Voltage | 350 mV | Not stated | Not stated | Not stated | Not stated | Not stated |
| Output Logic | 3 V CMOS | CMOS | CMOS | Not stated | Not stated | Not stated |
Diferenciadores clave
- Closest listed same-family sourcing option (frente a DS90LV032ATMX/NOPB)
- Direct four-channel LVDS receiver alternative (frente a DS90LV032ATM/NOPB)
- Documented performance for the DS90LV032A family (frente a DS26LV32ATM)
Notas de diseño
Route each LVDS pair as a tightly coupled differential pair with substantially equal length and geometry. Keep the pairs away from switching nodes, high-current return paths, and unrelated clocks. Provide a continuous ground reference beneath the interconnect, use suitable via stitching around the interface area, and avoid stubs or test-probe branches that create impedance discontinuities. The 200 MHz signaling capability requires careful return-path continuity as well as matched pair routing.
Validate the complete link with the intended DS90LV031A-compatible driver, cable or PCB structure, and receiving logic. Confirm input threshold margin, propagation delay, output timing, and enable state at every operating corner. The documented typical differential input is 350 mV, but production designs should use worst-case source amplitude, connector loss, skew, and noise rather than only the typical value. Receiver and transmitter placement should minimize trace length where the link budget is limited.
Do not treat a shared 16-SOIC outline as proof that every quad differential receiver is electrically interchangeable. Check enable polarity, input common-mode range, fail-safe behavior, supply tolerance, propagation delay, and temperature grade in the manufacturer datasheet before substituting DS26LV32ATM, SN65LVDS32D, PI90LV032AWE, or DS90LV027ATM. For an existing DS90LV032ATMX board, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are the closest listed same-family options.
Place the local supply-decoupling network close to the 3.3 V pins and follow the Texas Instruments DS90LV032A datasheet for the required capacitance and connection sequence. Keep the supply return continuous and minimize impedance between the decoupling capacitor and the device. Because four active receiver channels can contribute simultaneous dynamic current, evaluate worst-case supply noise and digital-logic coupling at the connector and connector-adjacent circuitry.
Información de cumplimiento
The operating temperature range is -40°C to +85°C. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for this exact orderable part, so those fields remain unknown.