Texas Instruments

DS90LV032ATMX - 400 Mbps Quad LVDS Receiver | Texas Instruments

Артикул: DS90LV032ATMX ✗ Снят с производства
350 mV Vdss 16-SOIC Package 200 MHz Speed
MOQ: 1 |

DS90LV032ATMX Обзор

Texas Instruments DS90LV032ATMX is a quad CMOS differential line receiver designed for high-speed LVDS links, supporting data rates in excess of 400 Mbps at 200 MHz in a 16-pin SOIC package. It accepts typical 350 mV differential input signals and converts them into 3 V CMOS outputs, making it suitable for point-to-point interfaces requiring low power consumption and high data throughput.

An LVDS receiver is an interface circuit that detects the voltage difference between two complementary low-voltage differential signals. This differential detection improves noise immunity and allows reliable communication over balanced interconnects. The DS90LV032A belongs to the broader LVDS interface IC family, where a quad receiver provides four independent differential input channels and four CMOS output channels.

The device supports signaling rates above 400 Mbps and uses a 3.3 V supply. Its CMOS outputs are designed for use with digital logic operating at compatible voltage levels. Four receivers are integrated in one package, reducing component count and board area compared with discrete single-channel receiver implementations. The 16-SOIC package is suitable for conventional surface-mount assembly.

The differential architecture is important in systems where common-mode voltage and externally coupled noise could disturb a single-ended signal path. A 350 mV typical differential input is evaluated relative to the complementary pair, so the receiver can distinguish the intended data transition from noise common to both conductors. The resulting CMOS signals can be routed into counters, controllers, FPGAs, or other digital processing blocks.

Typical applications include high-speed point-to-point data links, communications equipment, industrial control systems, test and measurement instruments, and backplanes requiring a low-power differential receiver. The device can also work with a compatible driver such as the DS90LV031A when both ends of the link use the same LVDS signaling convention.

PCB implementation should preserve the balanced geometry of each LVDS pair and provide a solid ground reference. Place the receiver close to the connector or transceiver when trace length is short, while observing the manufacturer’s input and supply-layout guidance when routing across a larger board.

This product page combines manufacturer electrical characteristics, package details, application guidance, and drop-in alternative analysis to support component selection and PCB planning. For obsolete inventory, current availability, and project-specific sourcing, use the Request a Quote form on this page.

Аналоги без доработки для DS90LV032ATMX — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с DS90LV032ATMX (тот же форм-фактор и посадочное место) — отличается по Package, Maximum Data Rate, Operating Temperature Range, Device Type, Technology.

Texas Instruments
Package: 8-lead SOIC
Maximum Data Rate: Greater than 600 Mbps
Device Type: LVDS dual high-speed differential driver
Сравнить с DS90LV032ATMX →
Texas Instruments
Package: 16-pin flat-pack PDSO16
Сравнить с DS90LV032ATMX →
Texas Instruments
Operating Temperature Range: -40 °C to +85 °C
Device Type: Quad high-speed differential LVDS receiver
Сравнить с DS90LV032ATMX →

DS90LV032ATMX/NOPB

✅ Прямая замена
📦 16-SOIC
Four receivers, 3.3 V supply and 16-SOIC footprint match; only the orderable suffix differs (0% functional change).

📋 Справочный аналог (нет в каталоге)

DS90LV032ATM/NOPB

✅ Прямая замена
📦 16-SOIC
Four receivers and 3.3 V supply match; 16-SOIC footprint matches, with the TM orderable suffix differing (0% functional change).

📋 Справочный аналог (нет в каталоге)

DS26LV32ATM

✅ Прямая замена
📦 16-SOIC
Four differential receivers and 16-SOIC package match; input common-mode range and threshold differences are not quantified, so proximity is treated as 70%.

📋 Справочный аналог (нет в каталоге)

SN65LVDS32D

✅ Прямая замена
Texas Instruments
📦 16-SOIC
Quad high-speed differential LVDS receiver · 4 · 400 Mbps · 3.3 V · 100 mV maximum · 2.1 ns · 60 mW · -40 °C to +85 °C

Уточнить цену

Открыть даташит →

PI90LV032AWE

✅ Прямая замена
📦 16-SOIC
Four LVDS receivers and 16-SOIC footprint match; electrical threshold and timing differences are not quantified, so proximity is treated as 70%.

📋 Справочный аналог (нет в каталоге)

DS90LV027ATM

✅ Прямая замена
Texas Instruments
📦 16-SOIC
LVDS dual high-speed differential driver · 2 · CMOS · 3.3 V · Greater than 600 Mbps · 300 MHz · LVDS · Current-mode differential driver

Уточнить цену

Открыть даташит →

DS90LV032ATMX Характеристики

Product Type Quad CMOS differential line receiver
Receiver Count 4 receivers
Technology Low-Voltage Differential Signaling (LVDS)
Maximum Data Rate Greater than 400 Mbps
Maximum Signaling Frequency 200 MHz
Typical Differential Input Voltage 350 mV
Напряжение питания 3.3 V
Тип выхода 3 V CMOS
Number of Differential Input Channels 4 channels
Number of Output Channels 4 channels
Корпус 16-SOIC
Тип монтажа Surface mount
Диапазон рабочих температур -40°C to +85°C

Руководство по цоколевке DS90LV032ATMX в корпусе 16-soic

Цоколевка для DS90LV032ATMX (корпус 16-soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 16-soic для DS90LV032ATMX

Нет подробных данных о распиновке для DS90LV032ATMX.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DS90LV032ATMX подходит для 6 применениеs: High-Speed Point-to-Point LVDS Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Communications and Backplane Interfaces, FPGA and Digital Logic Interfacing, Legacy Equipment Repair and Obsolescence Management.

🌐

High-Speed Point-to-Point LVDS Links

The DS90LV032ATMX is suitable for a point-to-point link requiring as many as four independent LVDS channels. According to the Texas Instruments DS90LV032A datasheet, the receiver supports data rates in excess of 400 Mbps at 200 MHz and detects a typical 350 mV differential input. Place the receiver at the receiving end of each balanced pair and route the four CMOS outputs into counters, controllers, FPGAs, or test equipment. The 16-SOIC package consolidates four receivers while maintaining compatibility with conventional surface-mount assembly. Interconnect length, connector return paths, driver configuration, and receiver enable states must be validated together because the receiver specification alone does not determine total link margin.

🏭

Industrial Control and Data Acquisition

The four-channel DS90LV032ATMX can receive synchronized or independent differential signals in industrial control and data-acquisition equipment. Its support for more than 400 Mbps provides ample link capacity for sensor data, machine-state information, and command traffic, while the 3 V CMOS outputs simplify connection to 3.3 V digital logic. According to the Texas Instruments DS90LV032A datasheet, each channel detects a typical 350 mV differential input. A practical implementation should preserve pair symmetry, provide a continuous ground reference, and avoid routing LVDS signals across noisy power-converter regions. Any isolation boundary, long cable, or protective device also changes the channel budget and should be reviewed as part of the complete interface design.

🖥️

Test and Measurement Equipment

DS90LV032ATMX is appropriate for test and measurement instruments that must recover low-amplitude differential signals delivered over a cable or controlled PCB interconnect. The receiver’s typical 350 mV differential sensitivity and operation above 400 Mbps support high-speed transfer between a remote instrument head and a processing backplane. According to the Texas Instruments DS90LV032A product page, the family was created as a lower-power alternative to high-power PECL or ECL interfaces. Use controlled-impedance routing, a proper reference plane, and the manufacturer’s input guidance when working near high-gain analog sections. An FPGA or microcontroller can then consume the CMOS outputs, provided its input thresholds and timing requirements are compatible.

📡

Communications and Backplane Interfaces

The DS90LV032ATMX can be used in communications equipment for balanced point-to-point links that require multiple low-voltage data channels. Its 400 Mbps-class capability and four integrated receivers provide a compact path between a line-card transmitter and a digital processor. The differential receiving method improves common-noise rejection compared with a single-ended input, provided the PCB maintains matched trace geometry and a nearby ground reference. According to the Texas Instruments DS90LV032A datasheet, the device converts a typical 350 mV differential signal into a 3 V CMOS output. Designers should evaluate the companion driver, connector return pins, cable characteristics, and any equalization or termination requirements before releasing the board layout.

🔧

FPGA and Digital Logic Interfacing

The DS90LV032ATMX is well suited to converting four LVDS pairs into CMOS signals for an FPGA, controller, or digital ASIC. Its 200 MHz signaling capability and 3.3 V supply align with common 3.3 V digital power domains, reducing the number of external receiver components. According to the Texas Instruments DS90LV032A datasheet, the differential input sensitivity is 350 mV typical and data rates can exceed 400 Mbps. The design should account for receiver-to-PCB trace length, output timing relative to the FPGA clock, and the enable or shutdown state during power sequencing. Confirm the exact pin configuration from the manufacturer datasheet and validate timing with the actual receiver and downstream device rather than relying only on aggregate signaling-rate figures.

🧩

Legacy Equipment Repair and Obsolescence Management

DS90LV032ATMX provides a practical option for repairing or sustaining equipment built around the classic DS90LV032A quad receiver. The device’s 16-SOIC footprint and four-channel architecture make it relevant when an installed board already has routing and interface timing designed around this family. According to Texas Instruments cross-reference information, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are identified as the closest qualified second-source options. A repair should still compare exact enable polarity, temperature grade, receiver thresholds, and propagation delay before installation. Preserving the original footprint reduces board rework, while production-equivalent sourcing and inspection requirements should be handled through the Request a Quote form for obsolete inventory.

Сводка рекомендуемых товаров

DS90LV031A Compatible LVDS quad line driver Используется в: High-Speed Point-to-Point LVDS Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Communications and Backplane Interfaces, FPGA and Digital Logic Interfacing DS90LV027ATM Texas Instruments Используется в: High-Speed Point-to-Point LVDS Links, FPGA and Digital Logic Interfacing DS26LV32ATM Four-channel differential receiver alternative Используется в: Industrial Control and Data Acquisition SN65LVDS32D Texas Instruments Используется в: Test and Measurement Equipment PI90LV032AWE Related quad LVDS receiver Используется в: Communications and Backplane Interfaces DS90LV032ATMX/NOPB Closest same-family orderable alternative Используется в: Legacy Equipment Repair and Obsolescence Management DS90LV032ATM/NOPB Closest qualified second-source option Используется в: Legacy Equipment Repair and Obsolescence Management
What are the key specifications of DS90LV032ATMX that engineers should know?
The DS90LV032ATMX is a four-channel LVDS differential line receiver with a 3.3 V supply, data-rate support above 400 Mbps, operation to 200 MHz, and 3 V CMOS outputs. According to the Texas Instruments DS90LV032A datasheet, the receiver accepts a typical 350 mV differential input and is packaged as a 16-SOIC. Its four integrated receiver channels make it appropriate for multi-lane point-to-point links where board area, power consumption, and component count are important.
What is the operating voltage of DS90LV032ATMX?
The DS90LV032ATMX operates from a 3.3 V supply and produces 3 V CMOS output signals. According to the Texas Instruments DS90LV032A product description and datasheet, the receiver translates low-voltage differential signals into 3 V CMOS logic levels. Confirm the power rail and output thresholds against the connected digital device before using the receiver in a new design.
What data rate does DS90LV032ATMX support?
The DS90LV032ATMX supports LVDS data rates in excess of 400 Mbps at signaling frequencies up to 200 MHz. According to the Texas Instruments DS90LV032A datasheet, this performance targets high-speed point-to-point interfaces. Actual system throughput also depends on the transmitter, cable or PCB interconnect, receiver configuration, signal integrity, and the downstream logic.
Where can I download the DS90LV032ATMX datasheet PDF?
The official DS90LV032A datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ds90lv032a.pdf. The document contains the device description, electrical characteristics, pin assignments, and application information for the DS90LV032A family. Use the DS90LV032A ordering information to identify the correct package and temperature options associated with DS90LV032ATMX.
Where is the DS90LV032ATMX pinout located?
The DS90LV032ATMX pinout is located in the Pin Configuration and Functions section of the Texas Instruments DS90LV032A datasheet. The device is a 16-SOIC with four differential receiver channels and associated enable or ground pins according to that pin table. Assign PCB nets from the manufacturer pin-description table rather than inferring connections from receiver channel order.
Is DS90LV032ATMX suitable for high-speed point-to-point links?
Yes, the DS90LV032ATMX is suitable for high-speed point-to-point LVDS links because it supports data rates above 400 Mbps and 200 MHz signaling. According to the Texas Instruments DS90LV032A product page, the family was designed as a lower-power alternative to high-power PECL or ECL devices. PCB trace geometry, connector return paths, terminations, and the companion transmitter still require normal LVDS signal-integrity review.
What can replace DS90LV032ATMX?
DS90LV032ATMX/NOPB is the closest listed same-family replacement because it retains the four-receiver, 3.3 V, 400 Mbps and 16-SOIC configuration while changing the orderable suffix. Cross-reference listings also identify DS90LV032ATM/NOPB as a second-source candidate. Before substitution, confirm enable behavior, input thresholds, propagation delay, operating temperature, and exact PCB footprint against the manufacturer datasheet.
What is the best drop-in replacement for DS90LV032ATMX?
DS90LV032ATMX/NOPB is the strongest listed drop-in replacement for DS90LV032ATMX because both identify the same four-channel 3.3 V LVDS receiver family and use the 16-SOIC footprint. The cross-reference information identifies both parts as closest qualified second-source options. Treat the suffix change as a procurement alternative only after checking lifecycle, traceability, and any orderable marking differences with the manufacturer.
Is DS90LV032ATMX the same as DS90LV032ATMX/NOPB?
DS90LV032ATMX and DS90LV032ATMX/NOPB are distinct orderable suffixes for the same DS90LV032A receiver family, and the manufacturer offers both in 16-SOIC packaging. Their cross-reference listing describes both as four-receiver, 3.3 V LVDS devices supporting 400 Mbps signaling. The NOPB designation identifies a particular orderable configuration, so purchasing and assembly documentation should reference the exact suffix being installed.
DS90LV032ATMX vs DS90LV032ATM/NOPB: which is better for an existing design?
DS90LV032ATM/NOPB is the more direct selection for an existing DS90LV032ATMX footprint because the cross-reference information identifies it as a closest qualified second-source option with the same four-receiver LVDS function and 16-SOIC package. The practical decision may still depend on lifecycle, temperature grade, enable configuration, and lot traceability. Compare the exact orderable data before releasing a production BOM.
When should I choose DS90LV032ATMX over a modern LVDS receiver?
Choose DS90LV032ATMX when maintaining an existing 16-SOIC PCB with established 3.3 V LVDS interfaces is more important than adopting a newer interface family. Its documented 400 Mbps capability and four integrated receivers match the classic DS90LV032A architecture. For new designs, compare modern receivers on supply range, failsafe behavior, data rate, power, channel count, and availability rather than assuming interchangeability.
Where can I buy DS90LV032ATMX and check current availability?
Use the Request a Quote form on this page to request current DS90LV032ATMX availability, obsolete-stock sourcing, lot conditions, and a project quotation. The part is identified as obsolete by a manufacturer-channel listing, so availability can vary by remaining inventory and sourcing channel. Submit the required quantity, date code, target grade, and packaging details for an actionable response.
What is the lead time for DS90LV032ATMX?
The current lead time for DS90LV032ATMX should be requested through the Request a Quote form on this page. Because the device is an obsolete part, lead time depends on remaining factory or channel inventory, lot traceability, inspection requirements, and shipment quantity. Providing a target quantity and acceptable date-code range enables the sourcing team to return a more accurate schedule.
What is the price of DS90LV032ATMX?
Current pricing for DS90LV032ATMX is handled through the Request a Quote form on this page. Obsolete-part pricing can vary with available lots, packaging, traceability, inspection, and order quantity, so a static figure may not reflect the purchasable market. Submit your required quantity, date-code preference, and delivery location for a current quotation.
Is DS90LV032ATMX in stock?
DS90LV032ATMX stock status should be confirmed through the Request a Quote form on this page. The part is identified as obsolete, meaning any remaining supply is likely constrained rather than replenished through normal production. Request quantity, lot date, inspection level, and target delivery date so the sourcing team can check the closest matching inventory.

Справочные инженерные данные для DS90LV032ATMX — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose DS90LV032ATMX when repairing or sustaining a 16-SOIC board designed around the DS90LV032A four-channel 3.3 V LVDS receiver. Its documented capability above 400 Mbps, 200 MHz operation, 350 mV typical differential input, and 3 V CMOS outputs make it appropriate for existing high-speed LVDS links. DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are the closest listed same-family choices, with the NOPB orderable suffix offering a distinct sourcing configuration. Consider DS26LV32ATM, SN65LVDS32D, PI90LV032AWE, or DS90LV027ATM only after checking the exact input thresholds, common-mode range, timing, enable behavior, and temperature grade. For entirely new designs, compare the DS90LV032A family against modern LVDS receivers rather than limiting the evaluation to legacy replacements.

Сравнение с аналогами

Параметр Этот товар DS90LV032ATMX/NOPB DS90LV032ATM/NOPB DS26LV32ATM SN65LVDS32D PI90LV032AWE
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Receiver Count 4 receivers 4 receivers 4 receivers 4 receivers 4 receivers 4 receivers
Supply Voltage 3.3 V 3.3 V 3.3 V Not stated Not stated Not stated
Signaling Technology LVDS LVDS LVDS Differential line receiver LVDS LVDS
Maximum Data Rate Greater than 400 Mbps 400 Mbps 400 Mbps Not stated Not stated Not stated
Maximum Signaling Frequency 200 MHz Not stated Not stated Not stated Not stated Not stated
Typical Differential Input Voltage 350 mV Not stated Not stated Not stated Not stated Not stated
Output Logic 3 V CMOS CMOS CMOS Not stated Not stated Not stated

Ключевые отличия

  • Closest listed same-family sourcing option (против DS90LV032ATMX/NOPB)
  • Direct four-channel LVDS receiver alternative (против DS90LV032ATM/NOPB)
  • Documented performance for the DS90LV032A family (против DS26LV32ATM)

Заметки по проектированию

Route each LVDS pair as a tightly coupled differential pair with substantially equal length and geometry. Keep the pairs away from switching nodes, high-current return paths, and unrelated clocks. Provide a continuous ground reference beneath the interconnect, use suitable via stitching around the interface area, and avoid stubs or test-probe branches that create impedance discontinuities. The 200 MHz signaling capability requires careful return-path continuity as well as matched pair routing.

Validate the complete link with the intended DS90LV031A-compatible driver, cable or PCB structure, and receiving logic. Confirm input threshold margin, propagation delay, output timing, and enable state at every operating corner. The documented typical differential input is 350 mV, but production designs should use worst-case source amplitude, connector loss, skew, and noise rather than only the typical value. Receiver and transmitter placement should minimize trace length where the link budget is limited.

Do not treat a shared 16-SOIC outline as proof that every quad differential receiver is electrically interchangeable. Check enable polarity, input common-mode range, fail-safe behavior, supply tolerance, propagation delay, and temperature grade in the manufacturer datasheet before substituting DS26LV32ATM, SN65LVDS32D, PI90LV032AWE, or DS90LV027ATM. For an existing DS90LV032ATMX board, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are the closest listed same-family options.

Place the local supply-decoupling network close to the 3.3 V pins and follow the Texas Instruments DS90LV032A datasheet for the required capacitance and connection sequence. Keep the supply return continuous and minimize impedance between the decoupling capacitor and the device. Because four active receiver channels can contribute simultaneous dynamic current, evaluate worst-case supply noise and digital-logic coupling at the connector and connector-adjacent circuitry.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The operating temperature range is -40°C to +85°C. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for this exact orderable part, so those fields remain unknown.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ds90lv032atmx nopb DS90LV032ATMX datasheet DS90LV032ATMX datasheet pdf DS90LV032ATMX pinout DS90LV032ATMX equivalent DS90LV032ATMX replacement DS90LV032ATMX cross reference DS90LV032ATMX 400 Mbps receiver DS90LV032ATMX 16-SOIC DS90LV032ATMX LVDS interface DS90LV032ATMX vs DS90LV032ATM DS90LV032ATMX price

Связанные компоненты & термины

Texas Instruments DS90LV032ATMX DS90LV032ATMX/NOPB DS90LV032ATM/NOPB DS26LV32ATM SN65LVDS32D PI90LV032AWE DS90LV027ATM DS90LV031A LVDS Low-Voltage Differential Signaling differential line receiver interface IC semiconductor 3 V CMOS 350 mV differential input 400 Mbps data rate 200 MHz signaling quad receiver 16-SOIC SOIC family surface mount point-to-point interface PCB signal integrity
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ