DS90LV032ATMX - 400 Mbps Quad LVDS Receiver | Texas Instruments
MPN: DS90LV032ATMX ✗ Cuối đờiDS90LV032ATMX Tóm tắt
An LVDS receiver is an interface circuit that detects the voltage difference between two complementary low-voltage differential signals. This differential detection improves noise immunity and allows reliable communication over balanced interconnects. The DS90LV032A belongs to the broader LVDS interface IC family, where a quad receiver provides four independent differential input channels and four CMOS output channels.
The device supports signaling rates above 400 Mbps and uses a 3.3 V supply. Its CMOS outputs are designed for use with digital logic operating at compatible voltage levels. Four receivers are integrated in one package, reducing component count and board area compared with discrete single-channel receiver implementations. The 16-SOIC package is suitable for conventional surface-mount assembly.
The differential architecture is important in systems where common-mode voltage and externally coupled noise could disturb a single-ended signal path. A 350 mV typical differential input is evaluated relative to the complementary pair, so the receiver can distinguish the intended data transition from noise common to both conductors. The resulting CMOS signals can be routed into counters, controllers, FPGAs, or other digital processing blocks.
Typical applications include high-speed point-to-point data links, communications equipment, industrial control systems, test and measurement instruments, and backplanes requiring a low-power differential receiver. The device can also work with a compatible driver such as the DS90LV031A when both ends of the link use the same LVDS signaling convention.
PCB implementation should preserve the balanced geometry of each LVDS pair and provide a solid ground reference. Place the receiver close to the connector or transceiver when trace length is short, while observing the manufacturer’s input and supply-layout guidance when routing across a larger board.
This product page combines manufacturer electrical characteristics, package details, application guidance, and drop-in alternative analysis to support component selection and PCB planning. For obsolete inventory, current availability, and project-specific sourcing, use the Request a Quote form on this page.
Bộ thay thế dễ dàng lắp đặt cho DS90LV032ATMX — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với DS90LV032ATMX (cùng hình factor và footprint) — khác nhau ở Package, Maximum Data Rate, Operating Temperature Range, Device Type, Technology.
DS90LV032ATMX/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90LV032ATM/NOPB
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS26LV32ATM
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
SN65LVDS32D
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PI90LV032AWE
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
DS90LV027ATM
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →DS90LV032ATMX Thông số kỹ thuật
| Product Type | Quad CMOS differential line receiver |
| Receiver Count | 4 receivers |
| Technology | Low-Voltage Differential Signaling (LVDS) |
| Maximum Data Rate | Greater than 400 Mbps |
| Maximum Signaling Frequency | 200 MHz |
| Typical Differential Input Voltage | 350 mV |
| Điện áp cung cấp | 3.3 V |
| Kiểu đầu ra | 3 V CMOS |
| Number of Differential Input Channels | 4 channels |
| Number of Output Channels | 4 channels |
| Hộp | 16-SOIC |
| Kiểu lắp đặt | Surface mount |
| Khoảng nhiệt độ hoạt động | -40°C to +85°C |
Hướng dẫn cấu hình chân DS90LV032ATMX 16-soic
Cấu hình chân cho DS90LV032ATMX (16-soic gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho DS90LV032ATMX.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
DS90LV032ATMX phù hợp cho 6 Áp dụngs: High-Speed Point-to-Point LVDS Links, Industrial Control and Data Acquisition, Test and Measurement Equipment, Communications and Backplane Interfaces, FPGA and Digital Logic Interfacing, Legacy Equipment Repair and Obsolescence Management.
High-Speed Point-to-Point LVDS Links
The DS90LV032ATMX is suitable for a point-to-point link requiring as many as four independent LVDS channels. According to the Texas Instruments DS90LV032A datasheet, the receiver supports data rates in excess of 400 Mbps at 200 MHz and detects a typical 350 mV differential input. Place the receiver at the receiving end of each balanced pair and route the four CMOS outputs into counters, controllers, FPGAs, or test equipment. The 16-SOIC package consolidates four receivers while maintaining compatibility with conventional surface-mount assembly. Interconnect length, connector return paths, driver configuration, and receiver enable states must be validated together because the receiver specification alone does not determine total link margin.
Được đề xuất
Industrial Control and Data Acquisition
The four-channel DS90LV032ATMX can receive synchronized or independent differential signals in industrial control and data-acquisition equipment. Its support for more than 400 Mbps provides ample link capacity for sensor data, machine-state information, and command traffic, while the 3 V CMOS outputs simplify connection to 3.3 V digital logic. According to the Texas Instruments DS90LV032A datasheet, each channel detects a typical 350 mV differential input. A practical implementation should preserve pair symmetry, provide a continuous ground reference, and avoid routing LVDS signals across noisy power-converter regions. Any isolation boundary, long cable, or protective device also changes the channel budget and should be reviewed as part of the complete interface design.
Được đề xuất
Test and Measurement Equipment
DS90LV032ATMX is appropriate for test and measurement instruments that must recover low-amplitude differential signals delivered over a cable or controlled PCB interconnect. The receiver’s typical 350 mV differential sensitivity and operation above 400 Mbps support high-speed transfer between a remote instrument head and a processing backplane. According to the Texas Instruments DS90LV032A product page, the family was created as a lower-power alternative to high-power PECL or ECL interfaces. Use controlled-impedance routing, a proper reference plane, and the manufacturer’s input guidance when working near high-gain analog sections. An FPGA or microcontroller can then consume the CMOS outputs, provided its input thresholds and timing requirements are compatible.
Được đề xuất
Communications and Backplane Interfaces
The DS90LV032ATMX can be used in communications equipment for balanced point-to-point links that require multiple low-voltage data channels. Its 400 Mbps-class capability and four integrated receivers provide a compact path between a line-card transmitter and a digital processor. The differential receiving method improves common-noise rejection compared with a single-ended input, provided the PCB maintains matched trace geometry and a nearby ground reference. According to the Texas Instruments DS90LV032A datasheet, the device converts a typical 350 mV differential signal into a 3 V CMOS output. Designers should evaluate the companion driver, connector return pins, cable characteristics, and any equalization or termination requirements before releasing the board layout.
Được đề xuất
FPGA and Digital Logic Interfacing
The DS90LV032ATMX is well suited to converting four LVDS pairs into CMOS signals for an FPGA, controller, or digital ASIC. Its 200 MHz signaling capability and 3.3 V supply align with common 3.3 V digital power domains, reducing the number of external receiver components. According to the Texas Instruments DS90LV032A datasheet, the differential input sensitivity is 350 mV typical and data rates can exceed 400 Mbps. The design should account for receiver-to-PCB trace length, output timing relative to the FPGA clock, and the enable or shutdown state during power sequencing. Confirm the exact pin configuration from the manufacturer datasheet and validate timing with the actual receiver and downstream device rather than relying only on aggregate signaling-rate figures.
Được đề xuất
Legacy Equipment Repair and Obsolescence Management
DS90LV032ATMX provides a practical option for repairing or sustaining equipment built around the classic DS90LV032A quad receiver. The device’s 16-SOIC footprint and four-channel architecture make it relevant when an installed board already has routing and interface timing designed around this family. According to Texas Instruments cross-reference information, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are identified as the closest qualified second-source options. A repair should still compare exact enable polarity, temperature grade, receiver thresholds, and propagation delay before installation. Preserving the original footprint reduces board rework, while production-equivalent sourcing and inspection requirements should be handled through the Request a Quote form for obsolete inventory.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho DS90LV032ATMX — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | DS90LV032ATMX/NOPB | DS90LV032ATM/NOPB | DS26LV32ATM | SN65LVDS32D | PI90LV032AWE |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC | 16-SOIC |
| Receiver Count | 4 receivers | 4 receivers | 4 receivers | 4 receivers | 4 receivers | 4 receivers |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V | Not stated | Not stated | Not stated |
| Signaling Technology | LVDS | LVDS | LVDS | Differential line receiver | LVDS | LVDS |
| Maximum Data Rate | Greater than 400 Mbps | 400 Mbps | 400 Mbps | Not stated | Not stated | Not stated |
| Maximum Signaling Frequency | 200 MHz | Not stated | Not stated | Not stated | Not stated | Not stated |
| Typical Differential Input Voltage | 350 mV | Not stated | Not stated | Not stated | Not stated | Not stated |
| Output Logic | 3 V CMOS | CMOS | CMOS | Not stated | Not stated | Not stated |
Bảo phân biệt quan trọng
- Closest listed same-family sourcing option (vsDS90LV032ATMX/NOPB)
- Direct four-channel LVDS receiver alternative (vsDS90LV032ATM/NOPB)
- Documented performance for the DS90LV032A family (vsDS26LV32ATM)
Ghi chú thiết kế
Route each LVDS pair as a tightly coupled differential pair with substantially equal length and geometry. Keep the pairs away from switching nodes, high-current return paths, and unrelated clocks. Provide a continuous ground reference beneath the interconnect, use suitable via stitching around the interface area, and avoid stubs or test-probe branches that create impedance discontinuities. The 200 MHz signaling capability requires careful return-path continuity as well as matched pair routing.
Validate the complete link with the intended DS90LV031A-compatible driver, cable or PCB structure, and receiving logic. Confirm input threshold margin, propagation delay, output timing, and enable state at every operating corner. The documented typical differential input is 350 mV, but production designs should use worst-case source amplitude, connector loss, skew, and noise rather than only the typical value. Receiver and transmitter placement should minimize trace length where the link budget is limited.
Do not treat a shared 16-SOIC outline as proof that every quad differential receiver is electrically interchangeable. Check enable polarity, input common-mode range, fail-safe behavior, supply tolerance, propagation delay, and temperature grade in the manufacturer datasheet before substituting DS26LV32ATM, SN65LVDS32D, PI90LV032AWE, or DS90LV027ATM. For an existing DS90LV032ATMX board, DS90LV032ATMX/NOPB and DS90LV032ATM/NOPB are the closest listed same-family options.
Place the local supply-decoupling network close to the 3.3 V pins and follow the Texas Instruments DS90LV032A datasheet for the required capacitance and connection sequence. Keep the supply return continuous and minimize impedance between the decoupling capacitor and the device. Because four active receiver channels can contribute simultaneous dynamic current, evaluate worst-case supply noise and digital-logic coupling at the connector and connector-adjacent circuitry.
Thông tin tuân thủ
The operating temperature range is -40°C to +85°C. No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for this exact orderable part, so those fields remain unknown.