DSPIC33EP512MU814-I/PH - 70 MIPS DSC, 512KB Flash, USB, 2x CAN | Microchip
N.º de pieza: DSPIC33EP512MU814-I/PH ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
DSPIC33EP512MU814-I/PH Descripción general
A digital signal controller combines the compute architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. In the semiconductor hierarchy, the dsPIC33EP512MU814 sits within the dsPIC33E family of DSCs, under Microchip's broader 16-bit microcontroller portfolio, targeting real-time embedded control where both fast math (MAC, DSP instructions) and rich peripherals are required in a single chip.
Key features include a modified Harvard architecture with a 16-bit data path and 24-bit instructions, linear program addressing, dual CAN 2.0B modules, a full-speed USB 2.0 device module, and 15-channel DMA for moving data without CPU intervention. Up to 122 general-purpose I/O lines and high-speed PWM outputs make the device especially suited to precision motor control and digital power conversion, where deterministic interrupt latency and DSP capability matter.
Technically, the dsPIC33E core integrates an enhanced DSP engine with single-cycle MAC and 40-bit wide accumulators, plus flexible clocking (internal FRC, primary oscillator, PLL) that lets designers trade power against performance. The peripheral ecosystem includes multiple UART, SPI and I2C modules, input capture and output compare channels, and a 10-bit ADC suited to current and voltage sensing loops in motor drives and power supplies.
Typical applications include dual-motor servo and BLDC drives, industrial inverters and solar converters (the family is explicitly marketed for DSC with dual motor control, dual CAN, USB), automotive-adjacent industrial nodes via the CAN interfaces, and USB-connected instruments requiring substantial flash for protocol stacks.
Design consideration: use any PGECx/PGEDx pair consistently for ICSP programming and debugging - for example PGEC2 must pair with PGED2 - and connect all VDD/VSS pins per the datasheet to avoid erratic behavior. Budget flash and RAM carefully; the 52 KB RAM is generous for its class but shared between X and Y data spaces.
This page synthesizes distributor pricing and availability signals, same-family drop-in alternatives, and practical design notes in one place - information not consolidated in the Microchip datasheet.
Alternativas directas para DSPIC33EP512MU814-I/PH — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con DSPIC33EP512MU814-I/PH (mismo factor de forma y huella) — difiere en Package, Operating Temperature, USB, Core Architecture, RAM.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
DSPIC33EP512MU814-E/PH
✅ Sustitución directa✓ En stock
$13.2 / unidad
Ver hoja de datos →DSPIC33EP256MU814-I/PH
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$11.75 / unidad
Ver hoja de datos →DSPIC33EP256MU814-E/PH
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$7.95 / unidad
Ver hoja de datos →DSPIC33EP512MU814-I/PH Valores máximos y características eléctricas
| Core | dsPIC33E 16-bit DSC core |
| Core Architecture | Modified Harvard, 16-bit data path, 24-bit instructions |
| Maximum CPU Speed | 60 MHz |
| Performance | 70 MIPS |
| Program Memory (FLASH) | 512 KB (170K x 24) |
| RAM | 52 KB |
| DMA Channels | 15 |
| CAN Modules | 2 x CAN 2.0B |
| USB | USB 2.0 full-speed device |
| Communication Interfaces | I2C, SPI, UART, USB, 2x CAN |
| General-Purpose I/O | 122 |
| Supply Voltage Range | 3.0 V to 3.6 V (3.3 V nominal) |
| Temperatura de funcionamiento | -40C to +85C (I grade) |
| Encapsulado | 144-TQFP (16x16 mm), PH suffix |
| Tipo de montaje | Surface Mount |
| Programming / Debug | ICSP via PGECx/PGEDx pairs (multiple pairs available) |
| Family | dsPIC33EP (dsPIC33E, 33EP) |
Guía de configuración de pines de DSPIC33EP512MU814-I/PH 144-tqfp (16x16 mm), ph suffix
Configuración de pines para DSPIC33EP512MU814-I/PH (encapsulado 144-tqfp (16x16 mm), ph suffix). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para DSPIC33EP512MU814-I/PH.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
DSPIC33EP512MU814-I/PH es adecuado para 6 aplicacións: Dual-Axis Precision Motor Control, Industrial CAN Bus Gateways, USB-Connected Test and Measurement Instruments, Solar Inverters and Digital Power Conversion, Automotive and Off-Highway Control Units, Embedded Industrial IoT Nodes.
Dual-Axis Precision Motor Control
The DSPIC33EP512MU814-I/PH fits dual-motor servo and BLDC drives because Microchip explicitly markets this die as a DSC with dual motor control support. The 70 MIPS DSP core executes field-oriented control (FOC) loops with single-cycle MAC instructions and 40-bit accumulators, keeping current-loop cycle times in the tens of microseconds. High-speed PWM outputs drive two inverters independently, while 15 DMA channels stream ADC current-sense samples into RAM without CPU intervention. Using one 144-pin TQFP for two axes reduces BOM count versus two smaller MCUs and simplifies synchronisation of the two drive axes through shared timers and interrupts.
Recomendado
Industrial CAN Bus Gateways
The dual CAN 2.0B modules make the DSPIC33EP512MU814-I/PH a natural fit for industrial gateway nodes bridging two CAN buses - for example, linking a machine-level CANopen segment to a vehicle or PLC backbone. Each CAN module has its own message buffers and DMA support, so both buses can sustain heavy traffic with low CPU overhead, while the 70 MIPS core handles protocol translation, filtering, and application logic concurrently. The 512 KB FLASH accommodates dual protocol stacks plus an OTA-style firmware update region, and the 52 KB RAM buffers message queues during burst traffic, a common failure point on smaller CAN controllers.
Recomendado
USB-Connected Test and Measurement Instruments
For bench instruments, data loggers, and programmable power modules, the USB 2.0 full-speed device module on the DSPIC33EP512MU814-I/PH provides a plug-and-play host connection without an external USB controller chip. The 512 KB FLASH holds USB stack, command parser, DSP post-processing, and calibration tables simultaneously, while 15 DMA channels keep acquisition streams moving during USB transfers. The 144-pin package supplies 122 GPIO for front-panel controls, display buses, and measurement front ends. Designers should budget ROM/RAM carefully since the 52 KB RAM is shared between the DSP Y-data space and general variables, but it is generous for this device class.
Recomendado
Solar Inverters and Digital Power Conversion
Grid-tied solar inverters and digital power supplies benefit from the DSPIC33EP512MU814-I/PH's combination of 70 MIPS DSP throughput for MPPT and control loops, high-speed PWM for the power stage, and dual CAN for inverter monitoring and grid communication. The 10-bit ADC with DMA support closes fast voltage/current loops deterministically, while the 3.3 V core keeps sensing interfaces simple. Because the -I/PH grade is -40C to +85C, outdoor enclosure designs without active cooling remain in spec; for automotive-adjacent or higher-temperature environments, the AEC-Q100 qualified DSPIC33EP512MU814-E/PH variant of the same die offers extended ratings on the identical footprint.
Recomendado
Automotive and Off-Highway Control Units
Although the -I/PH grade targets industrial use, the same die is available as the AEC-Q100 qualified DSPIC33EP512MU814-E/PH, making the platform a proven choice for automotive and off-highway control units that need CAN connectivity and motor/solenoid control. Dual CAN 2.0B supports multi-network architectures (powertrain segment plus body/telematics segment), and the USB device port serves factory diagnostics. Engineers designing for automotive should specify the E/PH variant from the outset; the pin-compatible footprint allows industrial prototypes on -I/PH hardware to be transitioned to the qualified part without PCB changes, compressing development schedules.
Recomendado
Embedded Industrial IoT Nodes
Industrial IoT edge nodes that aggregate sensor data and report over CAN or USB benefit from the DSPIC33EP512MU814-I/PH's on-chip connectivity and DSP filtering. The 15-channel DMA plus multiple UART, SPI, and I2C modules let one chip talk to ADCs, sensors, and radios concurrently while the 70 MIPS core runs FFT-based vibration analysis or Kalman filtering locally. With 122 GPIO, the 144-pin TQFP drives relays, indicators, and displays without port expanders. Power the design from a clean 3.3 V rail within the 3.0-3.6 V window, and pair with a low-quiescent-current LDO for always-on nodes to preserve the -40C to +85C rating.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para DSPIC33EP512MU814-I/PH — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | DSPIC33EP512MU814-E/PH | DSPIC33EP256MU814-I/PH | DSPIC33EP256MU814-E/PH |
|---|---|---|---|---|
| Package | 144-TQFP (16x16 mm, PH) | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same | 144-TQFP (16x16 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FLASH Program Memory | 512 KB (170K x 24) | 512 KB | 256 KB | 256 KB |
| RAM | 52 KB | 52 KB | 52 KB | 52 KB |
| CPU Performance | 70 MIPS @ 60 MHz | 70 MIPS @ 60 MHz | 70 MIPS @ 60 MHz | 70 MIPS @ 60 MHz |
| USB / CAN | USB 2.0 FS device + 2x CAN 2.0B | USB 2.0 FS device + 2x CAN 2.0B | USB 2.0 FS device + 2x CAN 2.0B | USB 2.0 FS device + 2x CAN 2.0B |
| Temperature Grade | -40C to +85C (I) | Extended (E), AEC-Q100 qualified | -40C to +85C (I) | Extended (E), AEC-Q100 qualified |
| Typical Use Case | Industrial motor control, gateways, instruments | Automotive / AEC-Q100 designs | Cost-reduced industrial firmware <=256 KB | Cost-reduced automotive firmware <=256 KB |
Diferenciadores clave
- Dual motor control capability on one chip (frente a DSPIC33EP256MU814-I/PH)
- AEC-Q100 drop-in path for automotive designs (frente a DSPIC33EP512MU814-E/PH)
- Unique USB + dual CAN combination in the dsPIC33EP512 line (frente a DSPIC33EP512GP806T-E/PT)
Notas de diseño
The DSPIC33EP512MU814-I/PH has multiple PGECx/PGEDx ICSP programming pairs. You may use any pair, but clock and data must come from the same numbered pair (PGEC2 with PGED2, etc.), per Northern Software's dsPIC33EP512MU814 programming notes. Reserve a 5-pin header wired to one selected PGEC/PGED pair, MCLR, VDD, and GND on every production PCB, and do not repurpose the chosen pair for other functions that would load the lines during programming.
Supply the dsPIC33EP512MU814 from a clean 3.0-3.6 V rail (3.3 V nominal) and decouple every VDD pin pair - all VSS/VDD pins must be connected per the datasheet, not left floating. Place 100 nF ceramic capacitors at each supply pin plus one bulk 10 uF near the device. If a switching regulator feeds the rail, add an RC or ferrite filter before the MCU to protect ADC accuracy in motor-control current loops.
When using dual CAN and USB concurrently, keep CAN transceivers (e.g., MCP2551/MCP2562) close to the CANx TX/RX pins with series resistors and proper split termination (2x 60 ohm to a split node with a capacitor to ground). Route USB D+/D- as a 90 ohm differential pair within 5 mm of the connector. On a 144-pin TQFP, use at least a 4-layer PCB with a solid ground plane to control return paths for the high-speed PWM edges driving inverter gates.
Verified data shows conflicting flash figures across distributors (512 KB vs '536 KB' on third-party pages); the Microchip-specified capacity is 512 KB (170K x 24) - design to 512 KB and confirm the memory map in the 622-page family datasheet before finalizing a bootloader. Also note that AEC-Q100 qualification applies only to the -E/PH variant; using the -I/PH in automotive designs requires a formal deviation.
Información de cumplimiento
Standard RoHS /Pb-free Microchip production part (PH suffix denotes RoHS 144-TQFP). AEC-Q100 qualification applies only to the DSPIC33EP512MU814-E/PH variant per Arrow listing. Formal REACH/halogen/conflict-minerals certificates not included in verified data - request from Microchip.
