EFM32ZG222F4-B-QFP48R - 24MHz ARM Cortex-M0+ MCU | Silicon Labs (Tape & Reel)
N.º de pieza: EFM32ZG222F4-B-QFP48R ✓ ActivoEFM32ZG222F4-B-QFP48R Descripción general
A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals. The EFM32 Zero Gecko family belongs to the 32-bit MCU and embedded-controller hierarchy, combining an Arm Cortex-M0+ core with energy-saving modes suitable for battery-powered, industrial, and connected equipment.
Key features include a maximum 24 MHz processor clock, 4 KB flash, 2 KB RAM, 37 digital I/O pins, and two 16-bit timers. According to the Silicon Labs EFM32ZG data sheet, the family consumes as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode. These figures make the device appropriate for meter, sensor-node, and portable applications where average energy use matters more than peak processing throughput.
The EFM32 architecture emphasizes autonomous peripherals, fast transitions between low-energy states, and extensive analog and digital integration. Its Cortex-M0+ core supports efficient event-driven control, while its timers and communication peripherals can reduce the need for continuous central-processor intervention. This architecture is especially useful in systems that must periodically acquire data, process it locally, and sleep for most of the operating cycle.
Typical applications include smart energy meters, gas and water meters, industrial sensor nodes, compact environmental monitors, and battery-powered accessories. The 37 digital I/O pins provide interface flexibility for sensors, switches, indicators, and external converters, while the 48-pin TQFP package supports conventional surface-mount assembly and prototype-board routing.
Designers should preserve the device's decoupling and exposed-ground requirements, follow the recommended pin multiplexing in the manufacturer pin-description table, and validate firmware against the selected clock, flash, and peripheral configuration. If software must operate with a larger firmware image or RAM working set, choose a member with sufficient memory rather than changing code without a complete peripheral and memory-map review.
This product record combines manufacturer specifications, package details, verified sourcing information, and same-family drop-in alternatives. It also identifies memory-capacity trade-offs that matter when evaluating replacements, while keeping package and pin compatibility as the central PCB-level constraints.
Alternativas directas para EFM32ZG222F4-B-QFP48R — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EFM32ZG222F4-B-QFP48R (mismo factor de forma y huella) — difiere en Flash Memory, Package, Digital I/O Pins, Architecture, RAM.
EFM32ZG222F8-B-QFP48
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32ZG222F32-B-QFP48
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
EFM32ZG222F4-QFP48
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32ZG222F8-QFP48
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32ZG222F32-QFP48
✅ Sustitución directaConsulte el precio
Ver hoja de datos →EFM32ZG222F4-B-QFP48R Valores máximos y características eléctricas
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 4 KB |
| RAM | 2 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C |
| Encapsulado | 48-TQFP, 7 mm x 7 mm |
| Tipo de montaje | Surface mount |
| Stop Mode Current | 0.5 µA |
| Run Mode Current | 114 µA/MHz |
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Program Memory Type | Embedded flash |
| Estado RoHS | Compliant |
| Recuento de pines | 48 pins |
Guía de configuración de pines de EFM32ZG222F4-B-QFP48R 48-tqfp, 7 mm x 7 mm
Configuración de pines para EFM32ZG222F4-B-QFP48R (encapsulado 48-tqfp, 7 mm x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EFM32ZG222F4-B-QFP48R.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EFM32ZG222F4-B-QFP48R es adecuado para 6 aplicacións: Smart Energy Metering, Gas and Water Meter Control, Industrial Sensor Nodes, Environmental Monitoring, Industrial Control and Automation, Battery-Powered Accessory Electronics.
Smart Energy Metering
The EFM32ZG222F4-B-QFP48R is well suited to compact energy-meter control because it combines a 24 MHz ARM Cortex-M0+ core with two 16-bit timers and low-energy operating modes. According to the Silicon Labs EFM32ZG data sheet, the family can consume as little as 0.5 µA in Stop mode, allowing the controller to wake for measurement, process data, and return to sleep. Its 4 KB flash and 2 KB RAM are adequate for compact protocol and signal-processing routines, provided the final firmware is size-checked. The 37 digital I/O pins support pulse inputs, status indicators, and external metering interfaces.
Recomendado
Gas and Water Meter Control
Battery-powered gas and water meters can use the EFM32ZG222F4-B-QFP48R to supervise flow or pulse inputs, manage a low-duty-cycle measurement sequence, and detect sensor faults. The 24 MHz Cortex-M0+ core provides more general-purpose processing than a basic fixed-function counter, while Stop-mode current of 0.5 µA helps limit idle consumption. Two 16-bit timers are useful for pulse accumulation and timing intervals. Because the device offers only 4 KB of flash and 2 KB of RAM, firmware must avoid unnecessary logging and should reserve sufficient memory for stack depth, calibration data, and communications code.
Recomendado
Industrial Sensor Nodes
The EFM32ZG222F4-B-QFP48R fits distributed industrial sensor nodes that periodically read a sensor, evaluate a threshold, and report through a simple serial interface. Its 24 MHz ARM Cortex-M0+ processor can execute local control logic, and the family run-mode figure of 114 µA/MHz provides a useful starting point for average-power estimation. The 37 digital I/O pins allow multiple digital sensors, discrete alarms, and status LEDs to share one controller. Choose a larger flash member when the application requires extensive diagnostics, a protocol library, or a bootloader; otherwise the 4 KB configuration can minimize cost and board complexity.
Recomendado
Environmental Monitoring
For environmental monitoring, the EFM32ZG222F4-B-QFP48R can coordinate temperature, humidity, gas, or light sensors while operating on a constrained power budget. Its low-power Stop mode and fast wake-up behavior support designs that sample periodically rather than continuously, and the 12-bit ADC noted in the product listing supports analog measurement interfaces. The 48-TQFP package is large enough to expose 37 digital I/O pins while remaining practical for a compact controller board. Designers should account for sensor standby current, regulator efficiency, and radio duty cycle because the MCU specification does not represent total system consumption.
Recomendado
Industrial Control and Automation
The EFM32ZG222F4-B-QFP48R can serve as a small supervisory controller for pumps, relays, valves, indicators, or condition-monitoring equipment. Two 16-bit timers support periodic control and input capture, while the 37 digital I/O pins provide flexibility for interlocks and status signals. Its 1.98 V to 3.8 V supply range fits low-voltage embedded systems when paired with an appropriate regulator. The 24 MHz processor is adequate for deterministic supervisory logic, but the 4 KB flash limit makes code organization important. Use the pin-description table to verify alternate-function assignments and avoid relying on every I/O pin for general-purpose control.
Recomendado
Battery-Powered Accessory Electronics
The EFM32ZG222F4-B-QFP48R can coordinate button input, status indication, sensor reading, and a low-rate serial connection in battery-powered accessories. The Zero Gecko family's 0.5 µA Stop-mode current and 114 µA/MHz Run-mode figure support energy-conscious designs that spend most of their time asleep. The ARM Cortex-M0+ core also gives developers a standard 32-bit software environment and access to the EFM32 peripheral ecosystem. Before committing, calculate code and RAM usage for the user interface, communication stack, and any buffered data; a larger same-package flash option may be preferable when the application cannot fit within 4 KB.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EFM32ZG222F4-B-QFP48R — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EFM32ZG222F8-B-QFP48 | EFM32ZG222F32-B-QFP48 | EFM32ZG222F4-QFP48 | EFM32ZG222F8-QFP48 | EFM32ZG222F32-QFP48 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 4 KB | 8 KB | 32 KB | 4 KB | 8 KB | 32 KB |
| Stop Mode Current | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family |
Diferenciadores clave
- Smallest documented flash configuration in the compared EFM32ZG222 QFP48 family (frente a EFM32ZG222F8-B-QFP48)
- Lower flash demand than the 32 KB family member (frente a EFM32ZG222F32-B-QFP48)
- Same documented core and I/O complement as the base configuration (frente a EFM32ZG222F4-QFP48)
Notas de diseño
Design the power tree around the 1.98 V to 3.8 V operating range and ensure the selected regulator meets the MCU's startup and I/O requirements under the -40 °C to +85 °C temperature range. Place the device's required supply and ground-bypass capacitors close to their package pins, using the manufacturer recommended values and layout. For battery-powered products, calculate the average current from active time, standby time, and the 114 µA/MHz Run-mode figure rather than relying only on the 0.5 µA Stop-mode value.
Follow the Silicon Labs EFM32ZG datasheet package drawing and pin-description table when routing the 48-pin TQFP footprint. Keep high-impedance sensor and communication traces away from switching nodes and noisy power-conversion circuits, and provide an uninterrupted ground path beneath and around the device where the package drawing permits. Validate footprint dimensions against the latest mechanical drawing because a 48-TQFP designation alone does not guarantee that every supplier drawing is current.
The most important substitution risk is firmware fit: EFM32ZG222F4-B-QFP48R has only 4 KB of flash and 2 KB of RAM. A same-package member with 8 KB or 32 KB of flash can preserve the footprint while changing memory resources and potentially the binary layout. Recheck linker placement, startup code, bootloader assumptions, interrupt vectors, and peripheral configuration before approving any alternative. Verify the exact ordering suffix for temperature grade and shipment format rather than assuming suffix equivalence.
Información de cumplimiento
RoHS compliance is identified in the product listing. No authoritative component-level information was available for REACH, AEC-Q100, halogen-free status, or conflict-minerals compliance.