EFM32ZG222F4-B-QFP48R - 24MHz ARM Cortex-M0+ MCU | Silicon Labs (Tape & Reel)
MPN: EFM32ZG222F4-B-QFP48R ✓ فعالEFM32ZG222F4-B-QFP48R نمای کلی
A microcontroller is a programmable system-on-chip that combines a processor core, memory, digital I/O, timers, analog interfaces, and communication peripherals. The EFM32 Zero Gecko family belongs to the 32-bit MCU and embedded-controller hierarchy, combining an Arm Cortex-M0+ core with energy-saving modes suitable for battery-powered, industrial, and connected equipment.
Key features include a maximum 24 MHz processor clock, 4 KB flash, 2 KB RAM, 37 digital I/O pins, and two 16-bit timers. According to the Silicon Labs EFM32ZG data sheet, the family consumes as little as 0.5 µA in Stop mode and 114 µA/MHz in Run mode. These figures make the device appropriate for meter, sensor-node, and portable applications where average energy use matters more than peak processing throughput.
The EFM32 architecture emphasizes autonomous peripherals, fast transitions between low-energy states, and extensive analog and digital integration. Its Cortex-M0+ core supports efficient event-driven control, while its timers and communication peripherals can reduce the need for continuous central-processor intervention. This architecture is especially useful in systems that must periodically acquire data, process it locally, and sleep for most of the operating cycle.
Typical applications include smart energy meters, gas and water meters, industrial sensor nodes, compact environmental monitors, and battery-powered accessories. The 37 digital I/O pins provide interface flexibility for sensors, switches, indicators, and external converters, while the 48-pin TQFP package supports conventional surface-mount assembly and prototype-board routing.
Designers should preserve the device's decoupling and exposed-ground requirements, follow the recommended pin multiplexing in the manufacturer pin-description table, and validate firmware against the selected clock, flash, and peripheral configuration. If software must operate with a larger firmware image or RAM working set, choose a member with sufficient memory rather than changing code without a complete peripheral and memory-map review.
This product record combines manufacturer specifications, package details, verified sourcing information, and same-family drop-in alternatives. It also identifies memory-capacity trade-offs that matter when evaluating replacements, while keeping package and pin compatibility as the central PCB-level constraints.
جایگزینهای drop-in برای EFM32ZG222F4-B-QFP48R — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای EFM32ZG222F4-B-QFP48R (همان فرمفاکتور و فوتپرینت) — متفاوت در Flash Memory, Package, Digital I/O Pins, Architecture, RAM.
EFM32ZG222F8-B-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F32-B-QFP48
✅ جایگزین مستقیم📋 جایگزین مرجع (خارج از کاتالوگ)
EFM32ZG222F4-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F8-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F32-QFP48
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←EFM32ZG222F4-B-QFP48R حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 4 KB |
| RAM | 2 KB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| محدوده دمای کاری | -40 °C to +85 °C |
| بستهبندی | 48-TQFP, 7 mm x 7 mm |
| نوع نصب | Surface mount |
| Stop Mode Current | 0.5 µA |
| Run Mode Current | 114 µA/MHz |
| Processor Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Program Memory Type | Embedded flash |
| وضعیت RoHS | Compliant |
| تعداد پایه | 48 pins |
راهنمای پیکربندی پین EFM32ZG222F4-B-QFP48R 48-tqfp, 7 mm x 7 mm
پیکربندی پین برای EFM32ZG222F4-B-QFP48R (پکیج 48-tqfp, 7 mm x 7 mm). این IC دیجیتال شامل GPIO، رابطهای ارتباطی (UART، SPI، I2C) و پینهای تغذیه است. برای عملکردهای جایگزین پین و گزینههای پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستمهای نهفته و چیدمان PCB.
داده پینآوت تفصیلی موجود نیست برای EFM32ZG222F4-B-QFP48R.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
EFM32ZG222F4-B-QFP48R مناسب است برای 6 کاربردs: Smart Energy Metering, Gas and Water Meter Control, Industrial Sensor Nodes, Environmental Monitoring, Industrial Control and Automation, Battery-Powered Accessory Electronics.
Smart Energy Metering
The EFM32ZG222F4-B-QFP48R is well suited to compact energy-meter control because it combines a 24 MHz ARM Cortex-M0+ core with two 16-bit timers and low-energy operating modes. According to the Silicon Labs EFM32ZG data sheet, the family can consume as little as 0.5 µA in Stop mode, allowing the controller to wake for measurement, process data, and return to sleep. Its 4 KB flash and 2 KB RAM are adequate for compact protocol and signal-processing routines, provided the final firmware is size-checked. The 37 digital I/O pins support pulse inputs, status indicators, and external metering interfaces.
پیشنهادی
Gas and Water Meter Control
Battery-powered gas and water meters can use the EFM32ZG222F4-B-QFP48R to supervise flow or pulse inputs, manage a low-duty-cycle measurement sequence, and detect sensor faults. The 24 MHz Cortex-M0+ core provides more general-purpose processing than a basic fixed-function counter, while Stop-mode current of 0.5 µA helps limit idle consumption. Two 16-bit timers are useful for pulse accumulation and timing intervals. Because the device offers only 4 KB of flash and 2 KB of RAM, firmware must avoid unnecessary logging and should reserve sufficient memory for stack depth, calibration data, and communications code.
پیشنهادی
Industrial Sensor Nodes
The EFM32ZG222F4-B-QFP48R fits distributed industrial sensor nodes that periodically read a sensor, evaluate a threshold, and report through a simple serial interface. Its 24 MHz ARM Cortex-M0+ processor can execute local control logic, and the family run-mode figure of 114 µA/MHz provides a useful starting point for average-power estimation. The 37 digital I/O pins allow multiple digital sensors, discrete alarms, and status LEDs to share one controller. Choose a larger flash member when the application requires extensive diagnostics, a protocol library, or a bootloader; otherwise the 4 KB configuration can minimize cost and board complexity.
پیشنهادی
Environmental Monitoring
For environmental monitoring, the EFM32ZG222F4-B-QFP48R can coordinate temperature, humidity, gas, or light sensors while operating on a constrained power budget. Its low-power Stop mode and fast wake-up behavior support designs that sample periodically rather than continuously, and the 12-bit ADC noted in the product listing supports analog measurement interfaces. The 48-TQFP package is large enough to expose 37 digital I/O pins while remaining practical for a compact controller board. Designers should account for sensor standby current, regulator efficiency, and radio duty cycle because the MCU specification does not represent total system consumption.
پیشنهادی
Industrial Control and Automation
The EFM32ZG222F4-B-QFP48R can serve as a small supervisory controller for pumps, relays, valves, indicators, or condition-monitoring equipment. Two 16-bit timers support periodic control and input capture, while the 37 digital I/O pins provide flexibility for interlocks and status signals. Its 1.98 V to 3.8 V supply range fits low-voltage embedded systems when paired with an appropriate regulator. The 24 MHz processor is adequate for deterministic supervisory logic, but the 4 KB flash limit makes code organization important. Use the pin-description table to verify alternate-function assignments and avoid relying on every I/O pin for general-purpose control.
پیشنهادی
Battery-Powered Accessory Electronics
The EFM32ZG222F4-B-QFP48R can coordinate button input, status indication, sensor reading, and a low-rate serial connection in battery-powered accessories. The Zero Gecko family's 0.5 µA Stop-mode current and 114 µA/MHz Run-mode figure support energy-conscious designs that spend most of their time asleep. The ARM Cortex-M0+ core also gives developers a standard 32-bit software environment and access to the EFM32 peripheral ecosystem. Before committing, calculate code and RAM usage for the user interface, communication stack, and any buffered data; a larger same-package flash option may be preferable when the application cannot fit within 4 KB.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای EFM32ZG222F4-B-QFP48R — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول | EFM32ZG222F8-B-QFP48 | EFM32ZG222F32-B-QFP48 | EFM32ZG222F4-QFP48 | EFM32ZG222F8-QFP48 | EFM32ZG222F32-QFP48 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz | 24 MHz |
| Flash Memory | 4 KB | 8 KB | 32 KB | 4 KB | 8 KB | 32 KB |
| Stop Mode Current | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family | 0.5 µA for EFM32ZG family |
تفاوتهای کلیدی
- Smallest documented flash configuration in the compared EFM32ZG222 QFP48 family (در مقابلEFM32ZG222F8-B-QFP48)
- Lower flash demand than the 32 KB family member (در مقابلEFM32ZG222F32-B-QFP48)
- Same documented core and I/O complement as the base configuration (در مقابلEFM32ZG222F4-QFP48)
یادداشتهای طراحی
Design the power tree around the 1.98 V to 3.8 V operating range and ensure the selected regulator meets the MCU's startup and I/O requirements under the -40 °C to +85 °C temperature range. Place the device's required supply and ground-bypass capacitors close to their package pins, using the manufacturer recommended values and layout. For battery-powered products, calculate the average current from active time, standby time, and the 114 µA/MHz Run-mode figure rather than relying only on the 0.5 µA Stop-mode value.
Follow the Silicon Labs EFM32ZG datasheet package drawing and pin-description table when routing the 48-pin TQFP footprint. Keep high-impedance sensor and communication traces away from switching nodes and noisy power-conversion circuits, and provide an uninterrupted ground path beneath and around the device where the package drawing permits. Validate footprint dimensions against the latest mechanical drawing because a 48-TQFP designation alone does not guarantee that every supplier drawing is current.
The most important substitution risk is firmware fit: EFM32ZG222F4-B-QFP48R has only 4 KB of flash and 2 KB of RAM. A same-package member with 8 KB or 32 KB of flash can preserve the footprint while changing memory resources and potentially the binary layout. Recheck linker placement, startup code, bootloader assumptions, interrupt vectors, and peripheral configuration before approving any alternative. Verify the exact ordering suffix for temperature grade and shipment format rather than assuming suffix equivalence.
اطلاعات انطباق
RoHS compliance is identified in the product listing. No authoritative component-level information was available for REACH, AEC-Q100, halogen-free status, or conflict-minerals compliance.