EP2S60F1020I5N - 60K LE Stratix II FPGA, 718 I/O, 1020-BGA
N.º de pieza: EP2S60F1020I5N ⚠ Última compra| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $268 | $2.680,00 |
| 100 | $245 | $24.500,00 |
| 500 | $222 | $111.000,00 |
| 1.000 | $198 | $198.000,00 |
EP2S60F1020I5N Descripción general
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs), programmable interconnect, and dedicated hard-IP blocks such as multipliers, memory blocks, and high-speed transceivers. Within the broader taxonomy, the EP2S60F1020I5N sits in the Stratix II family -> high-end FPGA -> programmable logic device -> semiconductor. FPGAs differ from ASICs by being fully re-programmable in the field, and from CPLDs by offering far higher logic capacity, embedded RAM, and DSP capability.
Key features of the EP2S60F1020I5N include 60,440 logic elements, 718 user I/O pins, 1.2 V core voltage with on-chip voltage regulation, dedicated DSP blocks for high-speed arithmetic, abundant TriMatrix embedded memory, and support for external memory interfaces including DDR/DDR2 SDRAM and QDRII SRAM. The device supports multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL.
Architecture-wise, Stratix II devices employ an adaptive logic module (ALM) structure that delivers up to 2.5x the performance and 2x the density of prior Stratix generations, with 8-input fracturable look-up tables (LUTs) per ALM. This enables efficient mapping of wide-fanin logic and arithmetic paths while reducing interconnect congestion.
Typical applications include high-speed digital signal processing, telecom baseband and line-card designs, military and aerospace signal processing, ASIC prototyping, high-performance video and image processing, and software-defined radio platforms where massive parallelism is required.
When designing with this part, ensure a robust multi-rail power distribution network because Stratix II requires separate VCCINT, VCCIO bank supplies, PLL analog supplies, and transceiver supplies. Thermal management is essential at high-utilization workloads; the FC-FBGA package requires careful PCB stack-up and thermal vias for heat removal.
This page synthesizes distributor pricing, lifecycle status, and Stratix II family cross-references not found in the manufacturer datasheet alone, supporting faster component selection and BOM risk reduction.
Alternativas directas para EP2S60F1020I5N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con EP2S60F1020I5N (mismo factor de forma y huella) — difiere en Operating Temperature, Speed Grade, Family, Package, Logic Elements.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
EP2S60F1020I4N
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$270 / unidad
Ver hoja de datos →EP2S60F1020C5N
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$143.75 / unidad
Ver hoja de datos →EP2S60F1020C4N
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$67 / unidad
Ver hoja de datos →EP2S60F1020C3N
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$1095 / unidad
Ver hoja de datos →EP2S130F1020I4N
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$1380 / unidad
Ver hoja de datos →EP2S60F1020I5N Valores máximos y características eléctricas
| Family | Stratix II |
| Logic Elements | 60440 |
| User I/O Count | 718 |
| Operating Frequency (max) | 609.76 MHz |
| Process Technology | 90 nm CMOS |
| Core Voltage (VCCINT) | 1.2 V |
| Encapsulado | 1020-ball FC-FBGA |
| Tipo de montaje | Surface Mount |
| Temperatura de funcionamiento | -40C to +100C (industrial) |
| Speed Grade | I5 |
| Temperature Grade | Industrial |
Guía de configuración de pines de EP2S60F1020I5N 1020-ball fc-fbga
Configuración de pines para EP2S60F1020I5N (encapsulado 1020-ball fc-fbga). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para EP2S60F1020I5N.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
EP2S60F1020I5N es adecuado para 6 aplicacións: High-Performance Digital Signal Processing, Telecom Baseband and Line-Card Designs, ASIC Prototyping and Emulation, Software-Defined Radio Platforms, High-Speed Video and Image Processing, Military and Aerospace Signal Processing.
High-Performance Digital Signal Processing
The EP2S60F1020I5N fits high-performance DSP applications because its 60,440 logic elements combined with dedicated 18x18 multiplier DSP blocks enable hundreds of GMACS throughput. The 1020-ball FC-FBGA package exposes 718 user I/O pins, allowing wide parallel data paths to external DDR2 or QDRII SRAM memories. Operating at up to 609.76 MHz, the device supports multi-channel FIR filters, FFT engines, and radar signal processing pipelines. The 1.2 V VCCINT and 90 nm CMOS process deliver favorable performance-per-watt for sustained DSP workloads.
Recomendado
Telecom Baseband and Line-Card Designs
The EP2S60F1020I5N fits telecom baseband processing because its high logic density, multi-standard I/O support (LVDS, SSTL, HSTL), and dedicated SERDES capability enable protocol bridging and packet processing at line rates. The 1020-ball FC-FBGA supports the abundant I/O required for backplane interfaces, SFP/SFP+ connectors, and parallel backplane buses. Industrial temperature grading supports outdoor cabinet deployment. Designers typically pair the EP2S60F1020I5N with external PHY devices and DDR2 SDRAM for buffer memory in multi-gigabit switching applications.
Recomendado
ASIC Prototyping and Emulation
The EP2S60F1020I5N is widely used as an ASIC prototyping platform because its 60,440 logic elements, abundant TriMatrix embedded memory, and 718 I/O pins allow mapping of multi-million-gate ASIC designs onto one or two FPGAs. Designers partition ASIC RTL across multiple EP2S60 devices with board-level partitioning, taking advantage of the FC-FBGA package's high I/O count for chip-to-chip signals. The 90 nm process node and Quartus II timing closure flow are well-validated for ASIC verification, with vector replay and live in-circuit emulation commonly deployed.
Recomendado
Software-Defined Radio Platforms
The EP2S60F1020I5N fits software-defined radio (SDR) platforms because its logic density and DSP throughput can implement multiple concurrent modulation/demodulation chains while maintaining real-time processing margins. The 1020-ball FC-FBGA's I/O count accommodates wide parallel ADC/DAC interfaces and high-speed LVDS data streams. Combined with its industrial temperature grade, the device supports ruggedized military and aerospace SDR deployments including tactical radios, electronic warfare subsystems, and signal-intelligence platforms operating from -40C to +100C.
Recomendado
High-Speed Video and Image Processing
The EP2S60F1020I5N serves high-speed video processing applications because its logic density and embedded memory bandwidth support real-time 1080p60 and 4K video pipelines, including color space conversion, scaling, deinterlacing, and codec preprocessing. The 1020-ball FC-FBGA package provides the 718 user I/O required for parallel CameraLink, DVI/HDMI, or DisplayPort bridge implementations. Industrial temperature grading supports broadcast equipment and surveillance applications, while 1.2 V core operation keeps power consumption manageable in multi-board imaging systems.
Recomendado
Military and Aerospace Signal Processing
The EP2S60F1020I5N is qualified for military and aerospace signal processing because its industrial temperature range (-40C to +100C), high logic density, and ruggedized FC-FBGA package meet MIL-STD environmental requirements. Applications include radar front-end processing, electronic countermeasures, secure communications, and avionics displays. Designers pair the device with rad-tolerant memory and protocol ASICs, using the 718 I/O count for sensor array interfaces. Long-term programs should verify part availability through authorized defense distributors given Last Time Buy status.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para EP2S60F1020I5N — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | EP2S60F1020I4N | EP2S60F1020C5N | EP2S60F1020C4N | EP2S60F1020C3N | EP2S130F1020I4N |
|---|---|---|---|---|---|---|
| Package | 1020-ball FC-FBGA | 1020-ball FC-FBGA | 1020-ball FC-FBGA | 1020-ball FC-FBGA | 1020-ball FC-FBGA | 1020-ball FC-FBGA |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Logic Elements | 60440 | 60440 | 60440 | 60440 | 60440 | 132540 |
| User I/O Pins | 718 | 718 | 718 | 718 | 718 | 718 |
| Temperature Grade | Industrial (-40C to +100C) | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) |
| Speed Grade | I5 | I4 (slower) | C5 | C4 | C3 (slowest) | I4 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Voltage (VCCINT) | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Diferenciadores clave
- Highest speed grade in the EP2S60F1020 family (frente a EP2S60F1020I4N)
- Industrial temperature range versus commercial only (frente a EP2S60F1020C5N)
- Lower-cost 60K alternative to 130K variant (frente a EP2S130F1020I4N)
Notas de diseño
Stratix II devices require a multi-rail power distribution network: VCCINT (1.2 V core), VCCIO (per-bank I/O voltages, often 1.5 V, 1.8 V, 2.5 V, or 3.3 V), VCCPD (3.3 V pre-driver), VCCA_PLL (analog PLL supply), and VCCAUX (2.5 V auxiliary). Use a power-sequencing controller such as the LTC2923 or TPS5430 to enforce proper rail ordering. Decoupling: place 0.1 uF X7R ceramics within 100 mils of every VCCINT and VCCIO pin, plus bulk 47 uF to 100 uF tantalum or polymer caps per power island. Inrush current during configuration can exceed 4 A; size your regulator accordingly.
The 1020-ball FC-FBGA package has a relatively high junction-to-ambient thermal resistance (theta_JA around 12-15 C/W with optimized PCB design). At high utilization, the EP2S60F1020I5N can dissipate 5-10 W. Use a 12-layer or higher PCB stack-up with dedicated inner ground and power planes; place thermal via arrays (0.3 mm pitch, 0.2 mm drill) under the BGA to conduct heat to inner planes and an optional heat spreader. For high-altitude or sealed enclosures, characterize with a thermal camera to ensure junction temperature stays below 100C.
Use a high-density interconnect (HDI) PCB process with 4-mil traces and 4-mil spaces for BGA breakout. The FC-FBGA ball pitch is typically 1.0 mm. Escape routing should follow via-in-pad or microvia designs to fan out from the 1020-ball array without exceeding signal-integrity budgets. Pair each high-speed differential pair (LVDS) with matched-length routing (within 25 mils) and 100 ohm differential impedance. Reference plane continuity is essential for all 50 ohm single-ended and 100 ohm differential traces crossing the BGA field.
Do not assume pin-compatible variants without verifying the ball map. EP2S60F1020I5N and EP2S130F1020I4N share the 1020-ball FC-FBGA package, but the silicon die differs and Quartus II pin assignments must be re-validated for any unused I/O banks. Configuration mode (AS, PS, JTAG) requires proper MSEL pin strapping; floating MSEL pins will fail to configure. JTAG chain integrity must be verified with the Quartus II programmer before soldering; rework on a 1020-ball BGA is extremely difficult.
Differential LVDS pairs should be routed with 100 ohm differential impedance using a coplanar waveguide with ground (CPWG) structure on outer layers, or stripline on inner layers. Minimize layer transitions; each via adds approximately 0.5 to 1.5 nH of inductance. For DDR2 SDRAM interfaces, use matched-length (within 50 mils), matched-impedance (50 ohm SE) routing with proper write-leveling calibration in the Quartus II DDR2 controller. Place external memory within 2 inches of the FPGA to maintain signal integrity.
Información de cumplimiento
Compliance data not present in Verified Web Data; engineer should request REACH/RoHS declaration from Intel/Altera directly given Last Time Buy status.