Texas Instruments

INA117KUG4 - ±200V Difference Amplifier | Texas Instruments

N.º de pieza: INA117KUG4 ✓ Activo
±200 V Vdss 1.5 mA Id 8-pin SOIC Package
MOQ: 1 |

INA117KUG4 Descripción general

The Texas Instruments INA117KUG4 is a precision unity-gain difference amplifier with a ±200V common-mode input range, 200 kHz bandwidth, and a 2.6 V/µs slew rate, packaged in an 8-pin SOIC. It measures small differential voltages even when both input terminals are exposed to substantially larger common-mode voltages, making it suitable for high-voltage sensing, current measurement, and industrial instrumentation.

A difference amplifier is an amplifier category that rejects a voltage common to both inputs and amplifies the voltage difference between them. The INA117 belongs to the precision instrumentation-amplifier hierarchy, combining a precision operational amplifier with an integrated thin-film resistor network. Its monolithic construction provides a fixed unity gain and eliminates the gain-setting resistors normally required around a conventional difference amplifier.

The principal feature is the INA117's high common-mode voltage range of ±200V. It can therefore sense a small differential voltage across high-side, low-side, or floating conductors without requiring the signal itself to remain close to ground. Other stated characteristics include 1 mV input offset voltage, 1.5 mA supply current, and operation from ±5V to ±18V dual supplies. The device also includes input protection for momentary input-voltage excursions.

Internally, the INA117 combines a precision op amp with matched thin-film resistors in one monolithic IC. This arrangement supports a unity gain of 1 dB, predictable differential response, and rejection of common-mode signals without external matched resistor networks. Its 200 kHz bandwidth is sufficient for many measurement and control loops, although the 2.6 V/µs slew rate means it should not be treated as a wide-band, high-speed instrumentation amplifier.

Typical uses include measuring small voltage drops across high-current shunts, detecting current in power-conversion systems, monitoring high-side sensor signals, and building isolated or floating measurement front ends. The device is also appropriate for laboratory and industrial equipment where a measurement input may exceed ordinary op-amp input ranges by a wide margin.

Designers should verify supply polarity, input-versus-supply limits, and the permitted instantaneous input voltage before connecting a high-energy circuit. The output reference determines the output voltage corresponding to zero differential input, so reference-ground and output-signal routing should be planned carefully. Because common-mode range does not eliminate all safety concerns, upstream resistors, clamps, or isolation may still be required.

This page combines the manufacturer's core specifications, orderable-package information, drop-in alternatives, comparison parameters, and practical design guidance to support faster component selection and PCB implementation.

Alternativas directas para INA117KUG4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con INA117KUG4 (mismo factor de forma y huella) — difiere en Operating Temperature Range, Package, Input Protection, Gain, RoHS Status.

Analog Devices
Operating Temperature Range: -40 °C to +85 °C
Package: 8-SOIC (0.154", 3.90 mm width), R-7 tape & reel
RoHS Status: RoHS3 Compliant
Comparar con INA117KUG4 →
Texas Instruments
Operating Temperature Range: -40°C to +85°C
Package: 8-SOIC (surface mount)
Gain: 1 V/V (unity)
Comparar con INA117KUG4 →
Texas Instruments
Operating Temperature Range: −40 °C to +125 °C
Package: 8-pin SOIC (D), 3.9 mm nominal width
Input Protection: High-voltage capability with inherent input protection
Comparar con INA117KUG4 →
Texas Instruments
Operating Temperature Range: -40C to +125C
Package: 8-SOIC
Input Protection: Protected from momentary voltage surges
Comparar con INA117KUG4 →

INA117KU

✅ Sustitución directa
Texas Instruments
📦 SOIC-8
Precision unity-gain difference amplifier · ±200 V (VS = ±15 V) · ±500 V · ±500 V · 1 V/V (unity) · 0.02% max · 0.001% max · 86 dB min

Consulte el precio

Ver hoja de datos →

INA149N

✅ Sustitución directa
Texas Instruments
📦 SOIC-8
Precision unity-gain difference amplifier · 1 V/V (unity) · ±275 V · 1 · Precision op amp + integrated thin-film resistor network · Protected from momentary voltage surges · 8-SOIC · -40C to +125C

Consulte el precio

Ver hoja de datos →

AD629ARZ-R7

✅ Sustitución directa
Analog Devices
📦 SOIC-8
Difference Amplifier · 1 · ±270 V · ±6 V (with VS = ±15 V) · 1 V/V (unity) · 86 dB · 500 kHz · 2.1 V/µs

Consulte el precio

Ver hoja de datos →

AD8479

✅ Sustitución directa
📦 SOIC-8
Difference-amplifier alternative offered in an 8-pin SOIC; nominal gain and signal-handling specifications differ, so the complete pin function and transfer characteristic must be verified.

📋 Alternativa de referencia (no en el catálogo)

INA146UA

✅ Sustitución directa
Texas Instruments
📦 SOIC-8
Precision high-voltage programmable-gain difference amplifier (1 circuit) · 100 V/V · Set with external resistors · 550 kHz · 5 mV · ±15 V · 4.5 V to 36 V · ±2.25 V to ±18 V

Consulte el precio

Ver hoja de datos →

INA117KUG4 Valores máximos y características eléctricas

Amplifier Type Precision unity-gain difference amplifier
Number of Amplifiers 1 circuit
Common-Mode Input Voltage Range ±200 V
Input Offset Voltage 1 mV
Maximum Gain 1 dB
Gain 1 unity
Bandwidth 200 kHz
Slew Rate 2.6 V/µs
Supply Voltage Range ±5 V to ±18 V
Corriente de alimentación 1.5 mA
Rango de temperatura de funcionamiento -40 °C to 85 °C
Encapsulado 8-pin SOIC
Terminal Count 8 terminals
Tipo de montaje Surface mount
Temperature Grade Industrial
Internal Resistor Network Thin-film resistor network
Input Protection Protected against momentary input-voltage excursions
Estado RoHS Compliant
Estado del ciclo de vida Active
Manufacturer Document Page Count 17 pages

Guía de configuración de pines de INA117KUG4 8-pin soic

Configuración de pines para INA117KUG4 (encapsulado 8-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin soic para INA117KUG4

No hay datos detallados de patillaje disponibles para INA117KUG4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

INA117KUG4 es adecuado para 6 aplicacións: High-Side Shunt Current Sensing, Power-Module Output Monitoring, Industrial Sensor Front End, High-Voltage Battery Monitoring, Laboratory Instrumentation, Motor Drive Feedback.

⚡

High-Side Shunt Current Sensing

The INA117KUG4 fits high-side shunt sensing when a small differential voltage appears across a current shunt while the shunt sits at a substantially higher common-mode voltage. Its ±200V common-mode range permits sensing without bringing the input close to ground, and its 1 mV input offset establishes the baseline accuracy relevant to millivolt-scale shunt drops. Place the amplifier across the shunt, provide ±5V to ±18V supplies, and route the output into an ADC or control comparator. Check the source-to-input protection limits and add series resistance or clamps where the bus can experience fast transients.

🔧

Power-Module Output Monitoring

INA117KUG4 can monitor a small output-voltage change across a high-current power module while the module's terminal voltage is far above system logic levels. The ±200V common-mode capability protects the measurement concept from ordinary rail voltages, while the 200 kHz bandwidth supports feedback loops and supervisory circuitry that do not require high-speed transient capture. Use the amplifier in unity-gain configuration across the relevant sense points and reference its output to the midpoint established by the REF connection. Validate saturation, output swing, and common-mode behavior across startup, shutdown, and full load conditions.

🏭

Industrial Sensor Front End

The INA117KUG4 is suitable for industrial sensor interfaces in which a weak differential signal is superimposed on a high common-mode potential. Its fixed unity gain simplifies signal-path design, while the integrated thin-film resistor network avoids matching four external precision resistors around a conventional difference amplifier. The 1 mV input offset and 1.5 mA supply current support low-power instrumentation, and the industrial temperature specification covers -40 °C to 85 °C. Because sensor wiring can introduce ground differences and transients, use protected routing and verify that the sensor output remains within the amplifier's allowable common-mode and supply limits.

🔋

High-Voltage Battery Monitoring

INA117KUG4 can support high-voltage battery-pack monitoring when each measurement point shares a high common-mode voltage relative to the measurement electronics. The ±200V common-mode range is relevant to pack-level sensing, and unity-gain differential measurement rejects much of the voltage common to the two taps. The 200 kHz bandwidth is appropriate for slow balancing and supervisory functions rather than fast pulse-current analysis. Verify the maximum instantaneous input voltage, supply arrangement, and output operating range against the battery system's worst case, and provide protection against load dump or switching transients.

🧰

Laboratory Instrumentation

INA117KUG4 fits laboratory measurement equipment that must observe a small differential signal riding on a large common-mode voltage. The unity-gain architecture produces a direct differential measurement, while the integrated precision network improves repeatability compared with an unmatched discrete implementation. Its 200 kHz bandwidth handles many general-purpose instrument signals but not high-frequency waveform analysis. For instrument-grade results, verify input bias effects, output-noise behavior, settling time, and reference accuracy using the manufacturer test conditions. A shielded PCB layout and quiet reference return are especially important when resolving millivolt-level signals.

🏭

Motor Drive Feedback

INA117KUG4 can measure motor-drive feedback signals when the shunt or sensing network introduces a small differential voltage on a switching or elevated common-mode node. The ±200V common-mode range offers substantial headroom for bus-related measurement, while the 2.6 V/µs slew rate and 200 kHz bandwidth are appropriate for many current-control loops. Place the inputs close to the shunt and keep them away from switching-node copper to limit capacitive coupling. Validate the amplifier against the drive's switching edges, overshoot, and operating-temperature range, since common-mode rating alone does not guarantee immunity to high dv/dt events.

What is the INA117KUG4?
The INA117KUG4 is a precision unity-gain difference amplifier that measures small differential voltages under a common-mode input range of up to ±200V. According to the Texas Instruments INA117 datasheet, it combines a precision operational amplifier and integrated thin-film resistor network in one monolithic IC. It is packaged in an 8-pin SOIC and is intended for high-side, low-side, and floating current-sensing circuits where the measured differential signal is much smaller than the surrounding common-mode voltage.
What are the key specifications of INA117KUG4 that engineers should know?
The INA117KUG4 combines a ±200V common-mode input range, unity gain, 1 mV input offset voltage, 200 kHz bandwidth, and 2.6 V/µs slew rate. According to the Texas Instruments INA117 datasheet, it operates from ±5V to ±18V and draws 1.5 mA supply current. The 8-pin SOIC package and integrated thin-film network make it suitable for compact current-sensing and instrumentation circuits requiring accurate differential measurement without an external matched-resistor network.
Where can I download the INA117KUG4 datasheet PDF?
The official INA117KUG4 datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ina117.pdf. The document describes the high common-mode voltage difference amplifier, electrical characteristics, package options, and application information. A separately hosted copy identifies the document as 17 pages, but the Texas Instruments link should be used for the authoritative manufacturer revision.
Where can I find the INA117KUG4 pinout?
The INA117KUG4 uses an 8-pin SOIC package, and its pin functions should be assigned from the pin-configuration table in the Texas Instruments INA117 datasheet. The verified product information confirms an 8-terminal SOIC package but does not reproduce the complete numbered pin list. Request a Quote for the component and consult the manufacturer pin-description table before assigning PCB tracks, especially for the reference, output, supply, and input terminals.
Can INA117KUG4 measure small signals at a high common-mode voltage?
Yes, the INA117KUG4 is specifically designed to measure small differential voltages with common-mode signals up to ±200V. According to the Texas Instruments INA117 datasheet, its integrated thin-film network and precision operational amplifier accurately amplify the difference between the inputs while rejecting the much larger common-mode component. This capability supports shunt measurements in high-voltage power systems where a conventional low-voltage instrumentation amplifier cannot directly accept the input voltage.
What is the difference between INA117KUG4 and INA117KU?
INA117KUG4 and INA117KU refer to the same Texas Instruments INA117 device offered through different order codes, with INA117KUG4 including the G4 ordering suffix. The published listing information identifies both as the INA117 in an 8-pin small-outline package with a -40 °C to 85 °C temperature range. Confirm the full suffix, package marking, and reel orientation against the manufacturer ordering table before treating one MPN as a procurement substitute.
What is the best drop-in replacement for INA117KUG4?
The closest same-family drop-in choice is the Texas Instruments INA117KU because both identify the INA117 in the same 8-pin small-outline package and industrial temperature range. INA117KUG4 adds the G4 suffix, so procurement and marking should be checked before substitution. Higher-speed or different-gain amplifier families may use the same package dimensions, but differing pin functions or common-mode limits can prevent true drop-in operation.
When should I choose INA117KUG4 over a lower-voltage difference amplifier?
Choose INA117KUG4 when the two measurement inputs can carry common-mode voltages as high as ±200V and the required signal bandwidth is near or below 200 kHz. Its unity gain, 1 mV input offset voltage, and integrated resistor network simplify current-shunt front ends. A lower-voltage difference amplifier may be preferable for small-signal instrumentation with lower common-mode exposure, lower cost, or substantially wider bandwidth.
Is INA117KUG4 suitable for high-side current sensing?
Yes, INA117KUG4 is suitable for high-side current sensing when the shunt differential voltage is small and the common-mode voltage remains within the device's operating limits. Its ±200V common-mode range allows measurement near the positive supply rail, while the 200 kHz bandwidth supports many control and monitoring loops. Use the manufacturer input-protection and absolute-maximum guidance when the source can experience transients beyond normal operating conditions.
How much supply current does INA117KUG4 consume?
INA117KUG4 consumes 1.5 mA supply current under the conditions stated in the Texas Instruments INA117 datasheet. The device operates from ±5V to ±18V, requiring both positive and negative supply rails for the listed operating configuration. Although the current is modest for an integrated precision amplifier, analog and digital return paths should be arranged carefully so output and reference current does not add noise to the shunt measurement.
What is the bandwidth and slew rate of INA117KUG4?
INA117KUG4 has a 200 kHz bandwidth and a 2.6 V/µs slew rate. According to the Texas Instruments INA117 datasheet, these figures define its ability to respond to changes in the differential input and to drive the output through a required voltage excursion. The device is well matched to measurement and control loops that do not require the conversion speed of a high-bandwidth precision difference amplifier.
Is INA117KUG4 RoHS compliant and still active?
INA117KUG4 is identified as RoHS compliant and active in current product information. The Texas Instruments product page lists INA117 availability in 8-pin plastic mini-DIP and SO-8 surface-mount packages, while the orderable KUG4 entry corresponds to the industrial SOIC configuration. Compliance and lifecycle status should still be confirmed for the exact orderable MPN when regulatory documentation or long-term production planning is required.
Where can I buy INA117KUG4 online and check stock?
Use the Request a Quote form on this page to ask about INA117KUG4 availability, order quantity, and current lead time. The form provides a direct engineering and sourcing channel without relying on a static stock statement. Because the component is listed as active, current allocation and delivery timing should be confirmed when the INA117KUG4 is needed for a production schedule.
What is the price of INA117KUG4?
Use the Request a Quote form on this page for the current INA117KUG4 unit price and quantity pricing. Pricing for this exact order code can change with volume, date, and market conditions, so a static figure should not be copied into a design budget. The form allows the request to include the required order quantity and intended package quantity.
What is the lead time for INA117KUG4?
Request the current INA117KUG4 lead time through the Request a Quote form on this page and include the required production quantity. The device is listed as active, but manufacturing capacity, component allocation, and order scheduling can affect actual delivery. A manufacturing schedule should therefore treat the supplier confirmation as the controlling lead-time commitment rather than an assumed generic interval.

Datos de referencia de ingeniería para INA117KUG4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose INA117KUG4 when the application requires a small differential voltage to be measured over a common-mode range as high as ±200V and a bandwidth near 200 kHz is sufficient. Its fixed unity gain and integrated thin-film network are particularly useful for high-side and low-side shunt sensing, battery monitoring, power-module feedback, and industrial instrumentation. INA117KU is the closest same-family ordering alternative, but the G4 suffix and procurement marking should be checked. INA149 or INA146UA may be considered only after verifying their pin functions, gain architecture, supply requirements, and common-mode limits. AD629 and AD8479 should be treated as cross-brand candidates requiring full validation rather than unconditional substitutions; their supply arrangements, transfer characteristics, and protection behavior may differ. For any replacement, verify the exact differential input polarity, REF behavior, output swing, absolute maximum input voltage, and PCB footprint on the manufacturer datasheet.

Comparación con alternativas

Parámetro Este producto INA117KU INA149 AD629 AD8479 INA146UA
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices Texas Instruments
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Amplifier Type Precision unity-gain difference amplifier Precision unity-gain difference amplifier High-common-mode difference amplifier High-voltage difference amplifier Difference amplifier Difference amplifier

Diferenciadores clave

  • Very high common-mode measurement range (frente a AD629)
  • Fixed unity gain with integrated thin-film network (frente a INA146UA)
  • Direct high-side shunt sensing capability (frente a AD8479)
  • Low 1.5 mA supply current (frente a INA149)

Notas de diseño

The INA117KUG4 requires both positive and negative supply rails in the stated operating configuration of ±5V to ±18V. Confirm the output swing at the selected supply voltage and load before using the device with a zero-centered input. The REF terminal establishes the output level for zero differential input; connect it to a low-impedance reference appropriate to the ADC or control system rather than allowing it to float.

A ±200V common-mode rating does not mean the device can safely tolerate ±200V continuously under every fault condition. Review the absolute-maximum input voltage, momentary input-protection behavior, and supply limits in the manufacturer datasheet. Add input series resistance and suitable clamping where the measured node can experience load dump, inductive kick, or other energy outside normal operating limits.

Route the two differential inputs as a compact pair directly from the shunt or sensing nodes, with minimal loop area and no switching-node copper beneath them. Keep the reference and output traces away from high-current return paths to prevent coupling. Because the device is designed around a thin-film resistor network and precision input offset, asymmetric routing and ground-potential differences can degrade the measured differential signal.

The 200 kHz bandwidth is adequate for many measurement loops but not for arbitrary high-frequency transients. Establish an anti-aliasing filter appropriate to the intended signal bandwidth and use the 2.6 V/µs slew rate to check output-moving requirements. For fast-switching systems, measure input-to-output response and common-mode behavior on the actual PCB because parasitic capacitance can introduce errors that are not apparent from the low-frequency gain specification.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS-compliant status is stated in the orderable-product information. The industrial-temperature INA117KUG4 is not identified as an AEC-Q100-qualified automotive device. No separate REACH, halogen-free, or conflict-minerals declaration is stated.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

INA117KUG4 datasheet INA117KUG4 datasheet pdf INA117KUG4 pinout INA117KUG4 specifications INA117KUG4 equivalent INA117KUG4 replacement INA117KUG4 cross reference INA117KUG4 vs INA149 INA117KUG4 vs AD629 INA117KUG4 price INA117KUG4 stock Texas Instruments INA117KUG4 INA117KUG4 SOIC-8 pinout INA117KUG4 high side current sensing INA117KUG4 200V common mode amplifier

Componentes & términos relacionados

Texas Instruments INA117KUG4 INA117KU INA149 INA146UA AD629 AD8479 difference amplifier precision amplifier instrumentation amplifier operational amplifier unity gain common-mode voltage differential voltage thin-film resistor network 200 kHz bandwidth 2.6 V/µs slew rate 1 mV input offset voltage 1.5 mA supply current ±200 V common-mode range SOIC-8 SOIC package surface-mount package RoHS high-side current sensing
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ