ISO6762FDWR - 6-Channel Digital Isolator 50Mbps | TI
N.º de pieza: ISO6762FDWR ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $2.85 | $2,85 |
| 10 | $2.56 | $25,60 |
| 100 | $2.05 | $205,00 |
| 500 | $1.82 | $910,00 |
| 1.000 | $1.65 | $1.650,00 |
ISO6762FDWR Descripción general
Digital isolators are components that provide galvanic isolation between two circuit domains while allowing digital signals to pass across the isolation barrier. They are essential in applications where ground potential differences, noise, or safety requirements demand separation, such as in industrial automation, motor drives, and medical equipment. The ISO6762FDWR uses capacitive isolation technology, which offers high-speed data transfer with low power consumption and excellent EMC performance, as highlighted in the datasheet.
Key features of the ISO6762FDWR include its 50 Mbps data rate, which supports high-speed protocols like SPI and RS-485, and its 1.8V logic support, enabling direct interface with low-voltage microcontrollers. The device also features an enable pin for output control, fail-safe outputs that default to a known state when inputs are unpowered, and a wide temperature range. Its reinforced isolation rating ensures reliable operation in safety-critical applications.
The ISO6762FDWR is built on TI's capacitive isolation technology, which uses high-voltage capacitors to couple signals across the barrier. This architecture provides low propagation delay and high CMTI, making it suitable for applications where fast transients are present. The device also includes integrated noise filtering to enhance signal integrity.
Typical applications include isolating SPI, RS-232, RS-485, and CAN buses in industrial control systems, motor drives, and power converters. Its high data rate and robust isolation make it ideal for communication interfaces in factory automation and building automation.
When designing with the ISO6762FDWR, ensure proper PCB layout with adequate clearance and creepage distances under the isolator to maintain the rated isolation voltage. Also, place decoupling capacitors close to the VCC pins to minimize noise.
Alternativas directas para ISO6762FDWR — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ISO6762FDWR (mismo factor de forma y huella) — difiere en CMTI, Operating Temperature, Package.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
ISO6762DWR
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ISO6762FQDWQ1
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ISO6762FDWRQ1
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ISO6760DWR
✅ Sustitución directa✓ En stock
$0.94 / unidad
Ver hoja de datos →ADuM1402
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
Si8642
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ISO6762FDWR Especificaciones
| Number of Channels | 6 (4 forward, 2 reverse) |
| Velocidad de datos | 50 Mbps |
| Isolation Voltage | 5000 Vrms |
| CMTI | 50 kV/µs |
| Supply Voltage (VCC1/VCC2) | 1.8V to 5.5V |
| Encapsulado | SOIC-16 (DW) 7.50mm |
| Temperatura de funcionamiento | -40°C to 125°C |
| Tipo de montaje | Surface Mount |
| Estado RoHS | Compliant |
| Logic Support | 1.8V logic support |
| Isolation Type | Capacitive |
| Fail-Safe Output | Yes |
| Patilla de habilitación | Yes |
Configuración de pines de ISO6762FDWR
| Pin 1 | VCC1 — Supply voltage for side 1 |
| Pin 2 | GND1 — Ground for side 1 |
| Pin 3 | INA — Input channel A |
| Pin 4 | INB — Input channel B |
| Pin 5 | INC — Input channel C |
| Pin 6 | IND — Input channel D |
| Pin 7 | EN1 — Enable for side 1 outputs |
| Pin 8 | GND1 — Ground for side 1 |
| Pin 9 | OUTE — Output channel E (reverse) |
| Pin 10 | OUTF — Output channel F (reverse) |
| Pin 11 | GND2 — Ground for side 2 |
| Pin 12 | EN2 — Enable for side 2 outputs |
| Pin 13 | OUTA — Output channel A |
| Pin 14 | OUTB — Output channel B |
| Pin 15 | OUTC — Output channel C |
| Pin 16 | VCC2 — Supply voltage for side 2 |
Aplicaciones típicas
ISO6762FDWR es adecuado para 6 aplicacións: Industrial Automation, Motor Drives, Power Converters, Medical Equipment, Building Automation, Test and Measurement.
Industrial Automation
The ISO6762FDWR provides galvanic isolation for communication interfaces in industrial automation systems, such as PLCs and motor drives. Its 50 Mbps data rate supports high-speed fieldbus protocols, while the 5000 Vrms isolation ensures safety in high-voltage environments. The device's high CMTI of 50 kV/µs prevents data corruption from fast transients, making it reliable in noisy factory floors. It can be used to isolate SPI, RS-485, and CAN buses between controllers and remote I/O modules.
Recomendado
Motor Drives
In motor drive applications, the ISO6762FDWR isolates control signals from the high-voltage power stage. Its 50 Mbps data rate allows fast PWM signal transmission, and the 5000 Vrms isolation protects low-voltage control circuits from high-voltage transients. The high CMTI ensures reliable operation in the presence of fast switching noise. The device can be used to isolate gate driver signals and feedback signals in variable frequency drives.
Recomendado
Power Converters
The ISO6762FDWR is used in power converters to isolate control and feedback signals across the isolation barrier. Its 5000 Vrms isolation rating meets safety requirements for mains-connected systems. The device's 1.8V logic support allows direct interface with low-voltage microcontrollers, simplifying the design. The high data rate enables fast communication for digital power control loops.
Recomendado
Medical Equipment
In medical equipment, the ISO6762FDWR provides patient isolation for communication interfaces. Its 5000 Vrms isolation rating meets stringent safety standards, and the wide temperature range ensures reliable operation. The device's low power consumption is beneficial for battery-powered devices. It can be used to isolate data lines in patient monitoring systems and diagnostic equipment.
Recomendado
Building Automation
The ISO6762FDWR is used in building automation systems to isolate communication buses like RS-485 and BACnet. Its 50 Mbps data rate supports high-speed data transfer, and the 5000 Vrms isolation protects against ground loops and surges. The device's compact SOIC-16 package is suitable for space-constrained controllers. It can be used in HVAC controllers, lighting systems, and access control panels.
Recomendado
Test and Measurement
In test and measurement equipment, the ISO6762FDWR isolates sensitive measurement circuits from noisy digital systems. Its high CMTI and low propagation delay ensure accurate signal transmission. The device's wide supply voltage range allows integration into various designs. It can be used to isolate data acquisition systems, oscilloscopes, and signal generators.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ISO6762FDWR — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ISO6762DWR | ISO6762FQDWQ1 | ADuM1402 |
|---|---|---|---|---|
| Package | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) | SOIC-16 (DW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Analog Devices |
| Number of Channels | 6 (4/2) | 6 (4/2) | 6 (4/2) | 4 (4/0) |
| Data Rate | 50 Mbps | 50 Mbps | 50 Mbps | 10 Mbps |
| Isolation Voltage | 5000 Vrms | 5000 Vrms | 5000 Vrms | 2500 Vrms |
| CMTI | 50 kV/µs | 50 kV/µs | 50 kV/µs | 25 kV/µs |
| Supply Voltage | 1.8V to 5.5V | 1.8V to 5.5V | 1.8V to 5.5V | 3.0V to 5.5V |
| Automotive Grade | No | No | Yes (AEC-Q100) | No |
Diferenciadores clave
- Higher data rate (50 Mbps) compared to ADuM1402 (10 Mbps) (frente a ADuM1402)
- Higher isolation voltage (5000 Vrms) compared to ADuM1402 (2500 Vrms) (frente a ADuM1402)
- Automotive grade option available (ISO6762FQDWQ1) (frente a ISO6762DWR)
Notas de diseño
Ensure proper PCB layout with adequate clearance and creepage distances under the isolator to maintain the rated isolation voltage. Place decoupling capacitors (0.1µF) close to VCC1 and VCC2 pins to minimize noise.
The ISO6762FDWR operates from 1.8V to 5.5V on both sides. Ensure that the supply voltages are within the specified range and that the power supply is stable. Use separate ground planes for side 1 and side 2 to maintain isolation.
Do not exceed the absolute maximum ratings for supply voltage or isolation voltage. Ensure that the enable pins are properly configured to avoid unintended output states. Verify the channel configuration (4/2) matches your application requirements.
Información de cumplimiento
RoHS compliant per TI product page. AEC-Q100 not applicable for standard version; automotive grade available as ISO6762FQDWQ1.
