Lattice Semiconductor

LC4128B-5T100I - 128-Macro-Cell ispMACH 4000B CPLD, 227 MHz | Lattice

N.º de pieza: LC4128B-5T100I ✓ Activo
3.3 V / 2.5 V / 1.8 V Vdss TQFP-100 Package 227 MHz Speed Non-volatile in-system programmable flash Memory
MOQ: 1 |

LC4128B-5T100I Descripción general

The Lattice Semiconductor LC4128B-5T100I is an in-system programmable CPLD from the ispMACH 4000B family, offering 128 macro cells, 64 user I/O pins and a maximum operating frequency of 227 MHz in a 100-pin TQFP package. The device supports 3.3 V, 2.5 V and 1.8 V supply operation, which lets the same board design scale across legacy and low-voltage system rails. According to the Lattice ispMACH 4000B family datasheet, the family features a maximum fMAX of 380 MHz and a propagation delay of 2.5 ns, with up to four programmable global clock pins for clock-domain control.

A CPLD is a user-programmable logic device that stores its configuration in non-volatile internal flash memory. Physically, a CPLD sits between simple programmable logic arrays and FPGAs: it offers the deterministic, single-chip, non-volatile configuration of a PAL or GAL while delivering the macro-cell density, wide I/O and multi-clock routing that previously required masked-programmed mask ROMs or gate arrays. The ispMACH 4000B name identifies Lattice's high-density SuperFAST branch of that family, aimed at glue logic, bus arbitration, protocol conversion and control-plane designs rather than datapath DSP.

Key features include 128 macro cells that can be interconnected with a fast global interconnect, 64 dedicated user I/O pins at 3.3 V / 2.5 V / 1.8 V, JTAG-based in-system programming for board-level configuration, and four programmable global clock pins. Because the configuration is stored in flash, the LC4128B-5T100I powers up in its logic state with no external PROM, no bitstream load time and no dedicated configuration FPGA on the board.

Architecturally, each macro cell contains programmable AND/OR logic, flip-flops, control logic and dedicated interconnect resources, so multi-clock designs with registered outputs are built without external registers. The 100-pin TQFP package exposes 64 user I/O plus dedicated configuration and control pins, giving a moderate pin count that suits moderate- to high-complexity interface logic rather than ultra-dense multi-bank designs.

Typical applications include bus arbitration and address decode for legacy peripherals, parallel-to-serial protocol bridging, motor and stepper control sequencing, test fixture and instrument control logic, encryption and key-management control, and glue logic that isolates an older microprocessor from a newer fabric. Designs that need more logic density or true DSP blocks typically move to an FPGA, while designs needing only a handful of gates move to a smaller GAL.

The main design consideration is that the LC4128B-5T100I is a mature, flash-based part with fixed, non-expandable resources: 128 macro cells must cover the entire design, including any glue logic added during debug. Confirm the -5 speed grade against your clock budget, keep JTAG access for in-field reprogramming, and observe the decoupling and thermal layout guidance in the family datasheet when running at 3.3 V with maximum I/O switching.

This page consolidates the device specification, package details, drop-in alternatives from the same Lattice ispMACH 4000B family, and practical design guidance that engineers would otherwise have to piece together from the manufacturer datasheet and distributor listings.

Alternativas directas para LC4128B-5T100I — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

LC4128B-5TN100I

✅ Sustitución directa
📦 TQFP-100
same ispMACH 4000B architecture, 128 macro cells, 64 I/O and 227 MHz fMAX; differs only in temperature/ordering designation, identical pinout

📋 Alternativa de referencia (no en el catálogo)

LC4128B-5T100C

✅ Sustitución directa
Lattice Semiconductor
📦 TQFP-100
Complex Programmable Logic Device · 128 macrocells · 64 pins · In-System Programmable · CMOS · 3.3 V, 2.5 V, or 1.8 V · 5 ns · 380 MHz

Consulte el precio

Ver hoja de datos →

LC4128B-5TN100C

✅ Sustitución directa
📦 TQFP-100
same ispMACH 4000B architecture, 128 macro cells, 64 I/O, 227 MHz; commercial temperature grade with the -TN ordering designation

📋 Alternativa de referencia (no en el catálogo)

LC4128B-5T100I Valores máximos y características eléctricas

Device Type In-System Programmable SuperFAST High Density PLD (CPLD)
Product Family ispMACH 4000B
Macro Cells 128
User I/O Pins 64
Maximum Operating Frequency (fMAX) 227 MHz
Maximum fMAX (per family feature list) 380 MHz
Propagation Delay (tPD) 2.5 ns
Logic Family CMOS
Tensión de alimentación 3.3 V / 2.5 V / 1.8 V
Package Type TQFP-100
Total Pin Count 100 pins
Global Clock Pins Up to 4, programmable
Configuration Memory Non-volatile in-system programmable flash
Programming Interface JTAG in-system programming
Tipo de montaje Surface Mount

Guía de configuración de pines de LC4128B-5T100I tqfp-100

Configuración de pines para LC4128B-5T100I (encapsulado tqfp-100). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado tqfp-100 para LC4128B-5T100I

No hay datos detallados de patillaje disponibles para LC4128B-5T100I.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LC4128B-5T100I es adecuado para 6 aplicacións: Legacy Bus Arbitration and Address Decode, Industrial Motor and Stepper Sequencing, Test and Measurement Fixture Control, Data Acquisition Handshake and Filtering, Interface and Protocol Bridging, Programmable Logic for Small Form-Factor Modules.

🔧

Legacy Bus Arbitration and Address Decode

The LC4128B-5T100I is well suited to arbitration and address decoding between an older microprocessor and newer peripherals because its 128 macro cells can absorb decode logic, handshake state machines and bus turnaround logic on one chip. With 64 user I/O pins, a design can hold several chip-select lines, bus request/grant signals and data-bus slices without a second logic device. Operated at 3.3 V or 2.5 V to match the legacy bus, it delivers up to 227 MHz with a 2.5 ns propagation delay, which covers standard bus cycle times with margin. JTAG in-system programming means the same board can be re-decoded in the field if the peripheral map changes, and non-volatile flash configuration gives deterministic state immediately after power-up.

🏭

Industrial Motor and Stepper Sequencing

In motor and stepper control boards, the LC4128B-5T100I provides the deterministic sequencing logic, direction decoding and limit-switch conditioning that a microcontroller alone handles awkwardly. Its programmable global clock pins allow the step rate generator to run in its own clock domain while the position counter runs from a slower system clock, avoiding metastable crossings between unrelated domains. With 64 I/O pins, one device can drive step/direction pairs, enable lines and encoder index inputs. Supply operation at 3.3 V and 2.5 V aligns with industrial logic rails, while in-system programming via JTAG allows firmware-adjacent logic fixes without board rework in the field.

🧰

Test and Measurement Fixture Control

Instrument front-ends and ATE fixtures use the LC4128B-5T100I to generate stimulus patterns, control analog switch matrices and arbitrate between measurement channels. Because the device is non-volatile, a fixture board powers up in its known test configuration with no time-consuming bitstream download, which shortens test cycle time. The 64 user I/O pins are sufficient for instrument handshake, trigger routing and relay driver control, and the up-to-four programmable global clock pins let trigger and pattern clocks be divided independently. In-system JTAG programming also allows a single board to be reconfigured for different DUT test plans in a manufacturing cell without swapping hardware.

📊

Data Acquisition Handshake and Filtering

The LC4128B-5T100I can serve as the timing hub between a fast ADC and a slower host processor in a data acquisition system, generating deterministic sample triggers, de-multiplexing control signals and filtering glitches on control lines. Registering the outputs through macro-cell flip-flops keeps trigger timing independent of host bus latency, and the programmable global clock pins support dividing a master sample clock for slower banks of channels. Running the logic at 2.5 V or 1.8 V next to modern converter cores reduces level-shifting components. Because configuration is held in internal flash, the acquisition board retains its sequencing program across power cycles and requires no external configuration memory.

🌐

Interface and Protocol Bridging

Where a board mixes two protocol families, the LC4128B-5T100I implements the glue that converts between them: parallel-to-serial shifting, byte stuffing, parity generation and clock-domain crossing. Macro-cell flip-flops provide the registered pipeline needed for source-synchronous handshakes, while the four programmable global clock pins support a slow management clock alongside a fast data clock. At 3.3 V the device can sit directly alongside legacy peripherals, and its 64 I/O pins fit a full 32-bit data bus plus control lines in a single TQFP-100 footprint. JTAG access lets a field technician reconfigure the bridge after a protocol revision without removing the board from the enclosure.

🧩

Programmable Logic for Small Form-Factor Modules

The LC4128B-5T100I is useful as a companion logic device on communication modules and IoT gateways, where a microcontroller lacks spare pins or timer resources. Its 128 macro cells can host sensor sampling control, watchdog logic, power sequencing and status multiplexing, and the 64 I/O pins allow direct drive of indicators, resets and level shifters. Multi-voltage support (3.3 V, 2.5 V and 1.8 V) lets the same CPLD interface to both a radio supply domain and a digital core domain, reducing level translators on crowded boards. Non-volatile in-system programming over JTAG means production programming and field upgrades happen through the same test interface, and the part powers up functional without any configuration load sequence.

What is the LC4128B-5T100I?
The Lattice Semiconductor LC4128B-5T100I is an in-system programmable CPLD in the ispMACH 4000B family, providing 128 macro cells, 64 user I/O pins and a maximum operating frequency of 227 MHz in a 100-pin TQFP package. According to the Lattice ispMACH 4000B family datasheet, the device supports 3.3 V, 2.5 V and 1.8 V supply operation and stores its configuration in non-volatile flash memory, so it powers up ready to run without an external PROM.
What is the maximum operating frequency of the LC4128B-5T100I?
The LC4128B-5T100I operates up to 227 MHz, according to the Lattice ispMACH 4000B family datasheet. The same family feature list quotes a maximum fMAX of 380 MHz for the fastest speed grade in the family, with a propagation delay of 2.5 ns. For a specific clocked design, check the -5 speed grade timing tables in the family datasheet against your actual output path, since achievable frequency depends on logic depth and routing.
How many macro cells and I/O pins does the LC4128B-5T100I have?
The LC4128B-5T100I provides 128 macro cells and 64 user I/O pins in a 100-pin TQFP package. Each macro cell contains programmable AND/OR logic, flip-flops and control resources, and the family datasheet lists up to four programmable global clock pins for multi-clock designs. Sizing guidance: a design should fit inside 128 macro cells including any debug glue logic, because the resource pool is fixed and cannot be expanded after tape-out.
What supply voltages does the LC4128B-5T100I support?
The LC4128B-5T100I supports 3.3 V, 2.5 V and 1.8 V operation, as stated in the Lattice ispMACH 4000B family datasheet. This multi-voltage support means the same TQFP-100 footprint can be used in legacy 3.3 V systems and in newer low-voltage 1.8 V core domains, provided the bank voltage and I/O standards of the target design match the device's configuration. Verify the specific VCCIO/VCC core rails and decoupling requirements in the family datasheet.
Is the LC4128B-5T100I still available for new designs?
The LC4128B-5T100I remains an active in-system programmable CPLD in the Lattice ispMACH 4000B family, and the manufacturer continues to document the part with its full datasheet, package and timing information. Because the ispMACH 4000B family is a mature, non-volatile platform, supply is generally stable compared with older mask-programmed or PROM-based CPLD families. Request a quote through the Request a Quote form on this page to confirm current availability and lead time for your volume.
What is the lead time and stock status for the LC4128B-5T100I?
The LC4128B-5T100I is a mature Lattice CPLD that is normally stocked in volume, but current quantity, lead time and packaging allocation must be confirmed for your specific order. Use the Request a Quote form on this page to receive current availability, minimum order quantity and lead time for the 100-pin TQFP package you need. Avoid sourcing from unverified channel sellers; stick with the request process on this page so that traceability and date code integrity are preserved.
Where can I download the LC4128B-5T100I datasheet PDF?
The LC4128B-5T100I datasheet PDF is available from Lattice Semiconductor as the ispMACH 4000B family data sheet, and mirrored copies are hosted by document repositories such as alldatasheet and datasheet4u. The manufacturer document covers pin assignments, macro-cell architecture, timing tables for the -5 speed grade, AC/DC characteristics for 3.3 V, 2.5 V and 1.8 V operation, JTAG programming, and TQFP-100 package drawings. Start with the family data sheet since it contains the timing and electrical tables for every package and speed grade.
Where can I find the LC4128B-5T100I pinout?
The LC4128B-5T100I pinout is documented in the pin assignment section of the Lattice ispMACH 4000B family data sheet, which lists all 100 TQFP pins including the 64 user I/O pins, the dedicated JTAG configuration pins (TDI, TDO, TMS, TCK) and the supply pins. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, and note that in a TQFP-100 the exposed pad is typically tied to ground. Verify exact pin numbering against the datasheet drawing before routing, since it is shared across the family.
What is the LC4128B-5T100I compared to the LC4128B-5TN100I?
The LC4128B-5TN100I is the same ispMACH 4000B device with the same 128 macro cells, 64 user I/O pins, 227 MHz maximum frequency and TQFP-100 footprint, differing in temperature grade and packaging/ordering convention rather than in logic. Because the pinout and I/O assignments are identical, the two are drop-in interchangeable at the board level as long as the temperature rating suits the end environment. Check the ordering information in the family data sheet for the exact grade and package-temperature combinations.
What is the best drop-in replacement for the LC4128B-5T100I?
The closest drop-in replacements for the LC4128B-5T100I are the same-family Lattice parts in the identical TQFP-100 footprint: LC4128B-5T100C, LC4128B-5TN100I and LC4128B-5TN100C, all of which share the 128 macro cells, 64 user I/O pins and 227 MHz maximum frequency of the ispMACH 4000B family. They differ mainly in temperature grade and commercial/industrial ordering designation. Use the Request a Quote form on this page to check availability of these parts and of the original.
Is there an Lattice Semiconductor equivalent for the LC4128B-5T100I?
Lattice Semiconductor's own ispMACH 4000B family provides the equivalent options: the LC4128B-5T100C and LC4128B-5TN100I variants match the LC4128B-5T100I in macro-cell count, user I/O count, speed grade and TQFP-100 footprint. Because they are pin-compatible with identical device architecture, the configuration bitstream is interchangeable across the family in most designs, subject to the supply voltage and temperature settings used. Cross-manufacturer CPLD equivalents with the same 100-pin footprint and pinout are not documented for this device.
When should I choose the LC4128B-5T100I instead of an FPGA?
Choose the LC4128B-5T100I when the design needs dense control logic - bus arbitration, protocol conversion, sequencing and multi-clock glue - but not DSP blocks, large memory or very high logic counts. The ispMACH 4000B offers 128 macro cells and 64 I/O with deterministic, non-volatile configuration and no bitstream load time. Choose an FPGA such as an XC7A-series device instead when you need more than roughly a few hundred logic elements, dedicated block RAM, or high-speed serial transceivers.
Is the LC4128B-5T100I suitable for industrial control applications?
The LC4128B-5T100I suits industrial control, instrumentation and test-equipment designs because it combines non-volatile in-system programming with a wide supply range of 3.3 V, 2.5 V and 1.8 V and up to four programmable global clock pins for multi-domain control logic. Its 64 user I/O pins are enough to drive control buses, relay or valve status logic, and data-acquisition handshake lines. Confirm the operating temperature range for the exact ordering suffix in the family data sheet before committing to a chassis-mounted or automotive-adjacent product.
How is the LC4128B-5T100I programmed and reconfigured in the field?
The LC4128B-5T100I is programmed in-system over the JTAG interface, which lets a board be configured without removing it from the system or using a separate PROM. Because the configuration is stored in internal non-volatile flash, the device retains its logic through power cycles and brownouts, and JTAG access can be kept on the board for firmware-style field updates and production programming. Provide a dedicated JTAG header and keep the programming pins routed so that updates do not require board rework.
What are the key specifications of the LC4128B-5T100I that engineers should know?
The LC4128B-5T100I is a Lattice ispMACH 4000B CPLD with 128 macro cells, 64 user I/O pins, a 227 MHz maximum operating frequency, 380 MHz family fMAX, 2.5 ns propagation delay, 3.3 V / 2.5 V / 1.8 V supply operation, four programmable global clock pins and a 100-pin TQFP package. The configuration is non-volatile and reprogrammable in-system through JTAG, which removes the need for an external PROM and gives deterministic power-up behaviour.

Datos de referencia de ingeniería para LC4128B-5T100I — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LC4128B-5T100I when a design needs more than simple glue logic but less than an FPGA: 128 macro cells, 64 user I/O pins, up to 227 MHz operation, three supply-voltage options and four programmable global clock pins cover bus decode, protocol bridging, sequencing and multi-domain control. Its non-volatile, JTAG-programmable flash is a decisive advantage where deterministic power-up behaviour and field reconfiguration matter. Choose the LC4128B-5TN100I when the same silicon is required with the -TN industrial ordering convention; choose the LC4128B-5T100C or LC4128B-5TN100C when the commercial temperature grade is sufficient and the -I grade is unavailable. Move to an FPGA such as an XC7A-series device when the design needs more than a few hundred logic elements, block RAM, DSP or high-speed serial I/O. Because every listed alternative shares the same ispMACH 4000B architecture and TQFP-100 footprint, PCB layout can be reused across the group; the only decision points are temperature grade and supply terms.

Comparación con alternativas

Parámetro Este producto LC4128B-5TN100I LC4128B-5T100C LC4128B-5TN100C
Package TQFP-100 TQFP-100 - same TQFP-100 - same TQFP-100 - same
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Macro Cells 128 128 128 128
User I/O Pins 64 64 64 64
Maximum Operating Frequency 227 MHz 227 MHz 227 MHz 227 MHz
Propagation Delay (tPD) 2.5 ns 2.5 ns 2.5 ns 2.5 ns
Supply Voltage Options 3.3 V / 2.5 V / 1.8 V 3.3 V / 2.5 V / 1.8 V 3.3 V / 2.5 V / 1.8 V 3.3 V / 2.5 V / 1.8 V
Global Clock Pins Up to 4, programmable Up to 4, programmable Up to 4, programmable Up to 4, programmable
Temperature Grade -I industrial grade ordering designation Industrial grade ordering designation Commercial grade Commercial grade
Configuration Memory Non-volatile in-system programmable flash Non-volatile in-system programmable flash Non-volatile in-system programmable flash Non-volatile in-system programmable flash

Diferenciadores clave

  • Non-volatile in-system programmable configuration removes the external PROM (frente a LC4128B-5T100C)
  • 128 macro cells and 64 user I/O in a single TQFP-100 footprint (frente a LC4128B-5TN100I)
  • Multi-voltage operation in one package footprint (frente a LC4128B-5TN100C)

Notas de diseño

Do not treat the ispMACH 4000B macro-cell count as expandable: the 128 macro cells of the LC4128B-5T100I must cover the entire design, including glue logic added during bring-up. Report macro-cell usage from the Lattice ispMACH development tool at every revision, not just at release, because a design that fits at 95% utilisation on the first pass has no headroom for late fixes. If utilisation climbs above roughly 80%, plan the migration path to a larger ispMACH family or an FPGA before committing the PCB spin.

Follow the TQFP-100 land pattern and thermal pad connection shown in the Lattice ispMACH 4000B family data sheet, including the exposed pad tie and the recommended via array for heat spreading. Place decoupling capacitors on the VCC and VCCIO pins close to the package, with separate high-frequency ceramic bypass on each supply rail. Keep the JTAG chain (TCK, TMS, TDI, TDO) away from fast switching outputs and route it as a short, quiet path to the programming header so field updates stay reliable.

Multi-clock designs must assign each domain a dedicated global clock pin and register all cross-domain signals in flip-flops rather than routing them as combinational paths, since the ispMACH 4000B interconnect is not a synchronous design boundary. When driving external buses at 227 MHz, confirm the output-slew and load assumptions in the AC timing tables of the family data sheet, and account for board skew with series termination or a source-synchronous arrangement. Registered outputs are preferred over combinational outputs for any signal leaving the device.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No compliance declarations for the LC4128B-5T100I were found in the manufacturer or distributor documentation reviewed. The part is a commercial/industrial logic device and is not an AEC-Q100 automotive-qualified product. Confirm RoHS, REACH and lead-free status with the manufacturer before committing to a regulated end market.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LC4128B-5T100I LC4128B-5T100I datasheet LC4128B-5T100I datasheet pdf LC4128B-5T100I pinout LC4128B-5T100I price LC4128B-5T100I stock LC4128B-5T100I equivalent LC4128B-5T100I replacement LC4128B-5T100I vs LC4128B-5TN100I ispMACH 4000B CPLD 128 macro cells Lattice Semiconductor LC4128B-5T100I TQFP-100 CPLD 227MHz 64 I/O LC4128B-5T100I in-system programming JTAG LC4128B-5T100I bus decode application circuit

Componentes & términos relacionados

Lattice Semiconductor LC4128B-5T100I LC4128B-5TN100I LC4128B-5T100C LC4128B-5TN100C ispMACH 4000B CPLD complex programmable logic device macro cell FPGA GAL in-system programming JTAG non-volatile flash configuration TQFP-100 TQFP package family surface mount CMOS propagation delay fMAX global clock pin 3.3 V / 2.5 V / 1.8 V supply bus arbitration protocol bridging
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ