Diodes Incorporated

LM2902QT14-13 - 36V Quad Op Amp, 14-TSSOP | Diodes Incorporated

N.º de pieza: LM2902QT14-13 ✓ Activo
36 V Vdss 700 µA Id 14-pin TSSOP Package
MOQ: 1 |

LM2902QT14-13 Descripción general

Diodes Incorporated LM2902QT14-13 is a four-circuit general-purpose operational amplifier designed for operation from a single supply of up to 36 V, with a typical supply current of 700 µA, input bias current of 20 nA, and open-loop gain of 100 dB. The device is supplied in a 14-pin TSSOP package and is identified as automotive compliant in the manufacturer datasheet listing.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. High-gain feedback structures make the op amp useful for voltage followers, buffers, transimpedance amplifiers, comparators, differential stages, and analog signal conditioning. Within the electronic-component hierarchy, the LM2902 is a quad operational-amplifier IC: four amplifiers share one package while retaining independent input and output stages.

The four independent circuits allow a compact design to implement several analog functions without using four separate packages. Key characteristics include a typical unity-gain bandwidth of 1 MHz, 100 dB typical open-loop gain, 20 nA typical input bias current, and 700 µA typical supply current. These values make the device suitable for general-purpose industrial and automotive signal-conditioning circuits where moderate bandwidth and low quiescent consumption are more important than high-speed performance.

The LM2902 family uses a high-voltage internal design intended for supply rails approaching 36 V. Its low input bias current reduces the error introduced when the op amp drives high-impedance sensors or resistor networks. The 1 MHz unity-gain bandwidth supports closed-loop operation at substantially lower frequencies, with practical bandwidth determined by amplifier gain, noise, slew rate, and stability requirements. Four amplifier sections also permit independent gain stages within one package.

Typical applications include sensor-signal conditioning, 4–20 mA loop receivers, industrial instrumentation, automotive signal conditioning, transducer interfaces, active filters, and low-frequency control systems. The 14-pin TSSOP package helps reduce PCB area, although exposed thermal and decoupling considerations remain important in multi-amplifier designs.

For PCB implementation, place the supply bypass capacitor close to the positive and negative supply pins and route each amplifier's feedback components close to its assigned pins. Check output-current limits, input common-mode range, output swing, and the required output-voltage headroom against the specific supply voltage before finalizing the circuit.

This page combines the key LM2902QT14-13 characteristics, package information, application guidance, and a qualified comparison framework to help engineers evaluate this 36 V quad operational amplifier for new and existing analog designs.

Alternativas directas para LM2902QT14-13 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

LM2902QT14-13 Valores máximos y características eléctricas

Amplifier Type General-purpose operational amplifier
Number of Circuits 4 circuits
Maximum Supply Voltage 36 V
Typical Supply Current 700 µA
Typical Input Bias Current 20 nA
Typical Open-Loop Gain 100 dB
Typical Unity-Gain Bandwidth 1 MHz
Encapsulado 14-pin TSSOP
Tipo de montaje Surface mount
Automotive Compliance Automotive compliant

Configuración de pines de LM2902QT14-13

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Aplicaciones típicas

LM2902QT14-13 es adecuado para 6 aplicacións: Automotive Sensor Signal Conditioning, Industrial Instrumentation Front End, 4-20 mA Loop Receiver, Transducer Interface Amplifier, Active Audio and Control Filter, Low-Frequency Power-Supply Feedback.

🚗

Automotive Sensor Signal Conditioning

The LM2902QT14-13 fits automotive sensor-conditioning circuits that need several amplified signals on one board. Its four independent amplifier sections can support low-side sensor amplification, signal buffering, threshold conditioning, and active filtering without requiring four separate packages. The manufacturer identifies the device as automotive compliant, while its 36 V maximum supply supports headroom for automotive battery-connected systems. Its 20 nA typical input bias current is useful with high-impedance sensors, and 1 MHz unity-gain bandwidth is adequate for many low-to-moderate-bandwidth channels. Confirm the exact temperature grade, common-mode range, output swing, and AEC-Q100 status before production release.

🏭

Industrial Instrumentation Front End

The LM2902QT14-13 can condition several low-frequency industrial inputs in one compact 14-pin TSSOP package. Its 36 V maximum supply rating provides useful voltage-range flexibility for circuits connected to higher-voltage process equipment, while the typical 700 µA supply current keeps consumption moderate. Individual amplifier sections can implement instrumentation stages, buffers, active filters, or comparator-style functions around sensors. The 1 MHz typical unity-gain bandwidth is suitable for slow sensor signals rather than high-speed data acquisition. Confirm input bias requirements, output swing, and ground-reference arrangements against the exact electrical-characteristics table.

🌐

4-20 mA Loop Receiver

A 4–20 mA receiver can use one LM2902QT14-13 section for input amplification and additional sections for filtering, buffering, or reference stages. The device's 20 nA typical input bias current helps reduce loading errors in high-impedance receiver networks, and its high open-loop gain of 100 dB supports accurate closed-loop signal conditioning. Its 36 V maximum supply rating provides useful compliance headroom when the receiver interface is exposed to industrial transients. The 1 MHz bandwidth is more than adequate for typical process-control loop rates. Validate the input common-mode range, maximum differential input, and output-swing limits before selecting the external resistor values.

🧩

Transducer Interface Amplifier

The LM2902QT14-13 is suitable for low-frequency transducer interfaces requiring multiple buffered or amplified channels. Its four independent sections allow designers to combine a sensor input stage, gain stage, output driver, and auxiliary buffer in one package. The 20 nA typical input bias current limits the current drawn through high-value sensor resistors, which is important when preserving measurement accuracy. The 36 V supply capability also allows operation from higher-voltage industrial rails, subject to the common-mode and output-swing specifications. For strain gauges, thermistors, or capacitive sensors, check the sensor's output range against the amplifier's allowable input range and use an appropriate low-noise resistor network.

🎧

Active Audio and Control Filter

The four amplifier sections in the LM2902QT14-13 can implement active filtering, gain, and buffering for low-frequency audio or industrial control signals. A typical unity-gain bandwidth of 1 MHz provides adequate loop gain for many sub-audio-band and control-loop filters, although exact response and stability depend on the selected topology. The general-purpose design also allows different sections to perform different tasks, reducing the need for multiple amplifier packages. Keep the operating points within the specified input and output ranges, and use the manufacturer's recommended compensation or feedback arrangements for each amplifier configuration. Avoid using it as a wide-band audio line driver without checking slew rate and output-current capability.

⚡

Low-Frequency Power-Supply Feedback

The LM2902QT14-13 can provide error amplification, soft-start control, or output monitoring around a low-frequency power-conversion stage. Its 100 dB typical open-loop gain supports accurate closed-loop regulation, while the 36 V maximum supply permits operation in higher-voltage industrial systems. The four sections can monitor input and output conditions, amplify a current-sense signal, or buffer a control reference. Because the device is not a dedicated power-control IC, its thermal dissipation, output swing, and stability must be evaluated under worst-case conditions. Place decoupling capacitors near the supply pins and keep feedback routing short to avoid introducing oscillation into the outer supply loop.

What are the key specifications of LM2902QT14-13?
The LM2902QT14-13 is a four-circuit general-purpose operational amplifier with a 36 V maximum supply, 1 MHz typical unity-gain bandwidth, 100 dB typical open-loop gain, 700 µA typical supply current, and 20 nA typical input bias current. According to the Diodes Incorporated LM2902 datasheet, all four amplifier sections are independent and are housed in a 14-pin TSSOP package. These characteristics position it for low-to-moderate-frequency signal conditioning rather than high-speed analog processing.
What is the operating voltage of LM2902QT14-13?
The LM2902QT14-13 supports a maximum supply voltage of 36 V. According to the Diodes Incorporated LM2902 datasheet, the device is built as a general-purpose, high-voltage quad operational amplifier. The exact minimum supply, input common-mode range, and output-swing limits should be taken from the electrical-characteristics table because those operating boundaries depend on the selected supply configuration. Design the circuit so signal levels remain inside those limits.
What type of package does LM2902QT14-13 use?
The LM2902QT14-13 uses a surface-mount 14-pin TSSOP package. The distributor product listing identifies the device as a four-circuit amplifier in a 14-TSSOP, while the manufacturer datasheet listing identifies it as automotive compliant. The package consolidates four amplifiers without exposing a thermal pad. Place the supply-bypass capacitor close to the supply pins and preserve short feedback traces to minimize board-level noise and instability.
Where can I download the LM2902QT14-13 datasheet PDF?
The LM2902QT14-13 datasheet PDF is available through the Diodes Incorporated document listing linked on this page. Use the manufacturer datasheet for the authoritative pin-description table, recommended operating conditions, electrical characteristics, and application information. The manufacturer datasheet also identifies the device as an automotive-compliant LM2902AQ-family quad operational amplifier. Use the pin-description table when assigning PCB tracks because each amplifier section has separate input and output pins.
Where can I find the LM2902QT14-13 pinout?
The LM2902QT14-13 pinout is defined in the pin-description table of the Diodes Incorporated LM2902 datasheet. The 14-pin TSSOP contains four independent amplifier sections, with two input pins, one output pin, and supply connections for each section. Use the package drawing and pin table together when laying out the board, and observe the device's pin-1 orientation. Do not infer a footprint from a generic TSSOP drawing without checking the package dimensions.
Is LM2902QT14-13 suitable for automotive applications?
The LM2902QT14-13 is identified as automotive compliant in the Diodes Incorporated datasheet listing. Its four-section architecture, 36 V supply capability, 1 MHz typical unity-gain bandwidth, and 20 nA typical input bias current suit general automotive signal-conditioning functions. The exact temperature grade and AEC-Q100 qualification status must be confirmed from the ordering information and qualification documentation before releasing an automotive production design.
Where can I buy LM2902QT14-13 and request a quote?
Use the Request a Quote form on this page to request LM2902QT14-13 pricing, stock confirmation, lead time, and minimum order quantity. The part is a Diodes Incorporated four-circuit operational amplifier in a 14-pin TSSOP package. For production planning, request the manufacturer ordering suffix and package quantity required for your assembly process so the quotation matches the exact assembled device rather than an unspecified LM2902 variant.
What is the lead time for LM2902QT14-13?
Request the current lead time for LM2902QT14-13 through the Request a Quote form on this page. Lead time can vary with the manufacturer's production status, package configuration, order quantity, and current inventory, so confirm the date and quantity in writing before committing a production schedule. For an exact component order, identify LM2902QT14-13 and the required reel or tray packaging rather than relying only on the base LM2902 family name.
Is LM2902QT14-13 in stock?
Request current stock status for LM2902QT14-13 using the Request a Quote form on this page. Current distributor search results show that the exact part is actively listed, but a live distributor page alone does not establish XAIPART inventory. The manufacturer, package suffix, and quantity should all be confirmed with the quote so procurement can plan assembly material delivery and avoid accepting a functionally similar but differently ordered variant.
What is the price of LM2902QT14-13?
Use the Request a Quote form on this page for the current LM2902QT14-13 price at the quantity you need. The quoted quantity break should identify Diodes Incorporated, the complete LM2902QT14-13 MPN, and the required 14-pin TSSOP packaging. Price can change with order volume, market availability, and delivery terms, so use the form's current response for budgeting rather than an uncited historical amount.
What is the difference between LM2902 and LM324?
The LM2902QT14-13 and LM324 belong to related quad general-purpose operational-amplifier families, but they are not automatically interchangeable solely because both contain four amplifiers. The LM2902 is specified here for a 36 V maximum supply, while the LM324 family includes variants with different package and temperature options. According to the Texas Instruments LM2902 family information, LM2902B and LM324B can replace earlier LM2902 and LM324 versions only after package, electrical limits, and ordering requirements are checked.
When should I choose LM2902QT14-13 over another quad op amp?
Choose LM2902QT14-13 when the design needs four independent general-purpose amplifiers, a supply capability up to 36 V, approximately 1 MHz unity-gain bandwidth, and a compact 14-pin TSSOP package. It is a stronger fit than a low-voltage amplifier when sensing or signal-conditioning signals referenced to industrial or automotive supply levels. Confirm input common-mode range, output swing, slew rate, and exact operating-temperature limits before committing the selection.
What is the best drop-in replacement for LM2902QT14-13?
The best drop-in replacement must match the 14-pin TSSOP footprint, amplifier-channel pin assignments, 36 V-class supply capability, and required biasing. A quad op amp with a different package or input arrangement is not a drop-in replacement even if its performance exceeds the original. Because the cross-reference results do not identify enough fully documented, exact-footprint alternatives, request manufacturer cross-reference data and verify the pin and electrical tables before approving a substitution.
Can LM2902 replace LM2902QT14-13?
A plain LM2902 designation is not sufficient to confirm replacement because package code, temperature grade, automotive qualification, and tape-and-reel ordering suffix must also match. The LM2902QT14-13 is a Diodes Incorporated automotive-compliant device in a 14-pin TSSOP. Choose an alternative only after confirming the exact footprint, pinout, maximum supply voltage, electrical characteristics, and qualification status. Do not rely on the base family name alone.
What is a good LM2902 equivalent for a 14-TSSOP design?
A suitable LM2902 equivalent must be a four-channel amplifier in the same 14-pin TSSOP footprint with compatible input, output, supply, and enable or bias arrangements. It must also satisfy the original circuit's input common-mode range, output swing, noise, bias current, bandwidth, and supply-voltage requirements. The LM2902 family information identifies related LM324B and LM2902B replacements, but engineers should verify the exact package and ordering code before approving a cross-brand substitution.

Datos de referencia de ingeniería para LM2902QT14-13 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LM2902QT14-13 when a design needs four independent general-purpose amplifier channels, a 14-pin TSSOP footprint, operation from a supply approaching 36 V, and modest bandwidth around 1 MHz. It is particularly suitable for industrial instrumentation, automotive sensor conditioning, 4–20 mA receiver circuits, transducers, active filters, and general low-frequency control systems. The 20 nA typical input bias current is beneficial for high-impedance sources, while the 700 µA typical supply current keeps power use moderate. LM324-family parts may be considered for related quad-amplifier designs, but engineers must verify exact package dimensions, channel pinout, common-mode range, offset voltage, temperature grade, and qualification. Do not select a substitute solely by amplifier count or package body size; the input and output assignments must match exactly for a true drop-in replacement.

Comparación con alternativas

Parámetro Este producto
Product Type Quad general-purpose operational amplifier
Brand Diodes Incorporated
Package 14-pin TSSOP
Number of Amplifiers 4 circuits
Maximum Supply Voltage 36 V
Typical Supply Current 700 µA
Typical Input Bias Current 20 nA
Typical Open-Loop Gain 100 dB
Typical Unity-Gain Bandwidth 1 MHz
Automotive Compliance Automotive compliant

Diferenciadores clave

  • Four independent amplifiers in one 14-pin TSSOP (frente a LM324)
  • High-voltage supply capability (frente a LM324)
  • Automotive-compliant ordering option (frente a Generic LM2902 variants)
  • Low input bias for impedance-sensitive circuits (frente a General-purpose dual op amps)

Notas de diseño

Place the positive and negative supply-bypass capacitors directly beside the LM2902QT14-13 supply pins, and keep amplifier feedback resistors and compensation components close to their associated amplifier pins. Each of the four sections is independent, so short signal paths around every channel are more valuable than routing a shared signal through the entire package. Observe the pin-1 orientation and follow the manufacturer's land pattern and paste recommendations for the 14-pin TSSOP.

Validate the actual input common-mode range and output swing at the selected supply voltage before finalizing external resistor values. The 36 V maximum supply describes the device's upper operating limit, not permission to apply an arbitrary signal to any input pin. Check maximum differential input voltage, output-current demand, and common-mode behavior under transient conditions. Add input protection where external wiring can expose the circuit to industrial or automotive surges.

Do not treat every quad op amp with a 14-pin body as a drop-in replacement. Verify channel ordering, supply-pin locations, input polarity, output behavior, offset voltage, bias current, bandwidth, slew rate, and common-mode limits. The LM2902 family is widely used, but package and ordering suffixes can change qualification and temperature coverage. Confirm the exact MPN and pin description before approving a substitution.

Evaluate heat dissipation from the total load current drawn by all four amplifier sections and from power dissipated in any output stage carrying a large voltage difference. The 14-pin TSSOP has limited exposed heat-dissipation area, and the standard operating temperature range is not established by the available product listing. Use the manufacturer's thermal information for the exact ordering code and consider copper spreading where continuous output loading or high ambient temperature is expected.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The Diodes Incorporated datasheet listing identifies LM2902QT14-13 as automotive compliant. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer ordering or compliance documentation.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM2902QT14-13 LM2902QT14-13 datasheet LM2902QT14-13 datasheet pdf LM2902QT14-13 pinout LM2902QT14-13 specifications LM2902QT14-13 equivalent LM2902QT14-13 replacement LM2902QT14-13 cross reference LM2902QT14-13 14-TSSOP LM2902QT14-13 price LM2902QT14-13 stock Diodes LM2902QT14-13 LM2902QT14-13 automotive op amp LM2902QT14-13 application circuit

Componentes & términos relacionados

Diodes Incorporated LM2902QT14-13 LM2902 LM324 quad operational amplifier operational amplifier op amp analog integrated circuit semiconductor general-purpose amplifier 14-pin TSSOP TSSOP package family surface-mount package 36 V 1 MHz 100 dB 20 nA 700 µA automotive compliant sensor signal conditioning 4–20 mA loop receiver industrial instrumentation transducer interface active filter
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ