Diodes Incorporated

LM2903AQM8-13 - Dual 36V Automotive Comparator | Diodes

N.º de pieza: LM2903AQM8-13 ✓ Activo
36 V Vdss 25 nA maximum Id 8-pin MSOP Package
MOQ: 1 |

LM2903AQM8-13 Descripción general

Diodes Incorporated LM2903AQM8-13 is a dual differential analog comparator designed for automotive and industrial systems, with a 36 V maximum supply voltage, 1 mV input offset voltage for the A grade, and an 8-pin MSOP package. The device contains two independent open-collector comparators and supports single-supply or split-supply operation. Its open-collector outputs are compatible with TTL, MOS, and CMOS logic families.

An analog comparator is a semiconductor that compares two input voltages and produces a digital logic state indicating which input is higher. The LM2903 belongs to the comparator hierarchy that includes general-purpose voltage comparators, differential comparators, interface ICs, and discrete semiconductors. This makes it suitable for threshold detection, signal conditioning, overvoltage monitoring, and control decisions where a simple logic output is required rather than an amplified analog voltage.

The A-grade LM2903 provides a low 1 mV input offset voltage, helping reduce errors when two closely spaced voltages must be compared. Its low output saturation voltage is 200 mV at an output current of 4 mA. The open-collector architecture allows the output transistor to be pulled up to a suitable external voltage, and low input bias current of 25 nA reduces disturbance of high-impedance sensing circuits. The device is qualified to AEC-Q100 Grade 1 for automotive applications.

The LM2903Q family operates from a single positive supply or from split supplies, with the common-mode input range including ground. Its differential input range can extend across the power-supply voltage. Two independent channels allow simultaneous or unrelated comparisons, while the common eight-pin MSOP footprint reduces board area compared with discrete single comparators. Output pull-up resistors must be added because the open-collector outputs do not source current actively.

Typical uses include automotive battery monitoring, sensor threshold detection, overvoltage and undervoltage protection, window comparators, and industrial control interfaces. In an automotive application, the device can compare a divided battery or sensor voltage against a reference and produce a logic signal suitable for a controller or protection circuit. Its AEC-Q100 Grade 1 qualification is the principal automotive distinction from the non-automotive LM2903M8-13.

When designing the circuit, account for input common-mode limits, output pull-up requirements, and the voltage difference that the input pair can withstand. Keep sensitive comparator inputs away from switching-current paths and provide a stable reference source when input offset directly affects the decision threshold. Decoupling capacitors should be placed close to the supply and ground pins according to the manufacturer's recommended application layout.

This page combines the exact package and automotive qualifications, pin and family context, practical protection applications, and a same-package comparison with the non-automotive LM2903M8-13. It highlights where the A-grade offset specification and AEC-Q100 qualification justify selection, while also showing the limits of drop-in alternatives that differ in automotive qualification.

Alternativas directas para LM2903AQM8-13 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM2903AQM8-13 (mismo factor de forma y huella) — difiere en Package, Differential Input Voltage Range, Logic Compatibility, Output Type, RoHS Status.

Diodes Incorporated
Package: MSOP-8
Differential Input Voltage Range: Equal to supply voltage
Logic Compatibility: TTL, MOS, CMOS
Comparar con LM2903AQM8-13 →
Diodes Incorporated
Logic Compatibility: TTL, CMOS, and MOS output compatible
Output Type: Open-collector
Comparar con LM2903AQM8-13 →
Diodes Incorporated
Package: 8-MSOP
Differential Input Voltage Range: Equal to the power-supply voltage
RoHS Status: Compliant
Comparar con LM2903AQM8-13 →

LM2903M8-13

✅ Sustitución directa
Diodes Incorporated
📦 8-pin MSOP
Dual differential voltage comparator · 2 channels · Up to 36 V · Supported · Supported · 300 ns · Open-collector · TTL, CMOS, and MOS output compatible

Consulte el precio

Ver hoja de datos →

LM2903AQM8-13 Valores máximos y características eléctricas

Comparator Type Dual differential voltage comparator
Number of Channels 2 channels
Maximum Supply Voltage 36 V
Input Offset Voltage, A Grade 1 mV maximum
Low Output Saturation Voltage 200 mV at 4 mA
Input Bias Current 25 nA maximum
Corriente de alimentación 0.6 mA maximum
Tipo de salida Open collector
Logic Compatibility TTL, MOS, and CMOS compatible
Common-Mode Input Range Includes ground
Differential Input Voltage Range Equal to the power supply voltage
Automotive Qualification AEC-Q100 Grade 1
Encapsulado 8-pin MSOP
Tipo de montaje Surface mount
Shipping Format Tape and reel
Lead-Free Status Totally lead-free
Estado RoHS Fully RoHS compliant
Halogen and Antimony Halogen and antimony free

Guía de configuración de pines de LM2903AQM8-13 8-pin msop

Configuración de pines para LM2903AQM8-13 (encapsulado 8-pin msop). Este dispositivo de potencia presenta terminales de puerta, drenador y fuente. Para encapsulados no polarizados, consulte la hoja de datos del fabricante para conocer la orientación exacta del pin 1 y los detalles del footprint. Las aplicaciones habituales incluyen el diseño de fuentes de alimentación, el accionamiento de motores y la conmutación de cargas.

Diagrama de patillaje del encapsulado 8-pin msop para LM2903AQM8-13

No hay datos detallados de patillaje disponibles para LM2903AQM8-13.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LM2903AQM8-13 es adecuado para 6 aplicacións: Automotive Battery Threshold Monitoring, Sensor Signal Conditioning, Overvoltage and Undervoltage Protection, Industrial Control Interface, Motor and Solenoid Control, Power-Supply Fault Detection.

🚗

Automotive Battery Threshold Monitoring

LM2903AQM8-13 fits automotive battery monitoring because its dual channels can compare divided battery voltages against references, while AEC-Q100 Grade 1 qualification supports vehicle-electronics requirements. The A-grade 1 mV input offset limit improves comparison resolution compared with the 2 mV non-A class. Place the device in a protected low-voltage sensing section, add external divider resistors, and use a pull-up resistor on each open-collector output. Verify that battery transients and the selected resistor network keep every input within the comparator's specified common-mode range.

🧩

Sensor Signal Conditioning

LM2903AQM8-13 is suitable for conditioning slow sensor signals that must be converted into a digital decision. Its 25 nA input bias current reduces loading on high-impedance sensor networks, and the 1 mV A-grade offset can improve the effective switching point. The two independent channels can compare upper and lower limits independently. Use the open-collector outputs to drive a logic input through pull-up resistors, and ensure sensor outputs remain within the common-mode input range while the supply can reject system noise.

⚡

Overvoltage and Undervoltage Protection

The two independent channels of LM2903AQM8-13 support window-comparator implementations for overvoltage and undervoltage protection. Divide each monitored voltage to the comparator input range, compare the scaled signal against a stable reference, and configure separate output pull-ups. The 1 mV input offset specification helps reduce threshold error in sensitive protection circuits, while its 36 V maximum supply rating supports wider industrial battery systems. Validate divider tolerances, reference stability, input protection, and fault behavior across the complete operating envelope.

🏭

Industrial Control Interface

LM2903AQM8-13 can translate analog control signals into open-collector logic states for industrial controllers. Its wide 36 V maximum supply rating accommodates higher-voltage systems when the input network is scaled appropriately, while the common-mode input range includes ground. The output saturation specification of 200 mV at 4 mA supports reliable sinking of a pull-up logic load. Place the device near the protected sensing node, maintain a quiet ground path, and account for the additional delay and propagation characteristics shown in the manufacturer datasheet.

🔧

Motor and Solenoid Control

LM2903AQM8-13 can implement current, speed, or position thresholds by comparing conditioned feedback from a motor-control system. The open-collector outputs can interface with a controller or protection stage, and the dual-channel configuration permits two related decisions. For automotive or safety-related motor electronics, AEC-Q100 Grade 1 qualification is the key selection reason. Design the input path to withstand motor transients, use a suitable logic pull-up, and verify that the reference and switching thresholds maintain adequate margin at temperature.

🔋

Power-Supply Fault Detection

LM2903AQM8-13 can supervise a power rail by comparing a divided rail voltage against a reference and asserting an open-collector fault signal. Two channels allow separate monitoring of a main rail and a secondary rail, provided both signals satisfy the common-mode input limits. The 36 V maximum supply voltage is useful when the comparator is powered from a higher rail, but the monitored inputs still require scaling or attenuation. Select pull-up values for the required fault-logic interface and validate behavior during startup, shutdown, and overload conditions.

Where can I buy LM2903AQM8-13 online?
Use the Request a Quote form on this page to request LM2903AQM8-13 pricing, current inventory, and order handling. The component is an 8-pin MSOP dual comparator from Diodes Incorporated, and the manufacturer documentation identifies it as an automotive-compliant AEC-Q100 Grade 1 device. Quote requests should specify the required quantity, reel quantity, and destination so procurement can confirm the exact packaged part and current commercial terms.
What is the price of LM2903AQM8-13?
Submit a Request a Quote through the form on this page for the current LM2903AQM8-13 price and volume breaks. Pricing can change with quantity, shipment configuration, and market conditions, so the structured price panel should be used rather than a static figure. The request should identify the exact MPN LM2903AQM8-13 and the required tape-and-reel quantity to ensure the quotation corresponds to the 8-pin MSOP automotive-qualified device.
What is the lead time for LM2903AQM8-13?
Request the current LM2903AQM8-13 lead time through the Request a Quote form on this page. Lead time depends on order quantity, production scheduling, and available stock, so it should be confirmed for each procurement event. Include the required reel quantity and shipment destination in the request. The device is offered in tape-and-reel format as an 8-pin MSOP, and the confirmation should explicitly reference LM2903AQM8-13.
Is LM2903AQM8-13 in stock?
Confirm current LM2903AQM8-13 availability through the Request a Quote form on this page. Stock levels vary by quantity and packaging configuration, making a real-time quotation the appropriate mechanism for confirming allocation. Include your required order quantity and reel count in the request. The part identifier includes the MSOP package code, tape-and-reel shipping suffix, and automotive-qualified A grade, so the request should use the complete MPN.
What are the key specifications of LM2903AQM8-13 that engineers should know?
The LM2903AQM8-13 is a dual differential comparator with a 36 V maximum supply voltage, 1 mV A-grade input offset voltage, 25 nA input bias current, and a 200 mV output saturation voltage at 4 mA. According to the Diodes Incorporated LM2903AQ datasheet, it provides open-collector outputs compatible with TTL, MOS, and CMOS logic, operates from single or split supplies, and is qualified to AEC-Q100 Grade 1.
What is the difference between LM2903AQM8-13 and LM2903M8-13?
Both devices use an 8-pin MSOP package and provide the basic dual open-collector comparator function, but LM2903AQM8-13 carries the A-grade 1 mV input offset specification and AEC-Q100 Grade 1 automotive qualification. The LM2903M8-13 listing does not identify it as automotive qualified. According to the Diodes Incorporated LM2903AQ datasheet, the A grade improves offset performance by approximately 1 mV relative to the 2 mV non-A grade.
LM2903AQM8-13 vs LM2903M8-13: which is better for automotive systems?
LM2903AQM8-13 is the better choice for automotive designs because it is qualified to AEC-Q100 Grade 1 and has a 1 mV maximum input offset voltage. LM2903M8-13 is the non-automotive member of the same 8-pin MSOP family. Both use open-collector outputs and support wide supply operation, but only LM2903AQM8-13 carries the documented automotive qualification required for many vehicle electronic-control programs.
When should I choose LM2903AQM8-13 over LM2903M8-13?
Choose LM2903AQM8-13 when the design requires AEC-Q100 Grade 1 automotive qualification or benefits from the 1 mV A-grade input offset limit. Choose LM2903M8-13 for a cost-sensitive industrial or consumer design that does not require automotive qualification. Both retain the same 8-pin MSOP footprint and dual open-collector architecture, but qualification and offset specifications are the decisive engineering differences.
Is LM2903AQM8-13 suitable for battery threshold monitoring?
LM2903AQM8-13 is suitable for automotive battery threshold monitoring when the sensing network keeps both inputs within the specified common-mode range. Its dual channels can monitor separate voltage thresholds, while the 1 mV A-grade offset improves resolution and the AEC-Q100 Grade 1 qualification supports automotive applications. The input divider, reference source, protection network, and output pull-up resistor still require design verification against the actual battery system.
What can replace LM2903AQM8-13?
LM2903M8-13 is the closest same-package drop-in replacement identified for LM2903AQM8-13 because both are dual comparators in 8-pin MSOP packages with open-collector outputs. The replacement changes the grade context: LM2903M8-13 is not identified as AEC-Q100 qualified, while LM2903AQM8-13 is. It also uses the 2 mV non-A offset specification versus 1 mV for the A grade, so it should not be selected where automotive qualification or tighter offset is mandatory.
Is LM2903AQM8-13 the same as LM2903M8-13?
LM2903AQM8-13 and LM2903M8-13 share the same 8-pin MSOP footprint and dual open-collector comparator function, but they are not identical in grade specification. LM2903AQM8-13 is the automotive-compliant A-grade version with a 1 mV offset limit and AEC-Q100 Grade 1 qualification. LM2903M8-13 is the non-automotive version associated with the 2 mV offset class in the manufacturer family documentation.
Where can I download the LM2903AQM8-13 datasheet PDF?
Download the manufacturer LM2903AQ family datasheet from the Diodes Incorporated PDF link shown on this page. The document covers the LM2903Q and LM2903AQ dual devices in SO-8, MSOP-8, and TSSOP-8 packages. According to the manufacturer datasheet, these devices use industry-standard pinouts, operate from single or split power supplies, and are qualified to AEC-Q100 Grade 1 for automotive-compliant applications.
Where can I find the LM2903AQM8-13 pinout?
Use the pin-assignment diagram in the Diodes Incorporated LM2903AQ family datasheet for the 8-pin MSOP configuration. The manufacturer states that the available packages use industry-standard pinouts, allowing comparison with LM2903M8-13 and other compatible dual comparators. The complete pin description table is not reproduced on this page because its text is not available for direct verification here; assign PCB nets from the manufacturer diagram and pin table.
How much current can LM2903AQM8-13 output source?
LM2903AQM8-13 uses open-collector outputs, so the output transistors sink current rather than actively sourcing load current. The manufacturer specifies a low output saturation voltage of 200 mV at 4 mA. A pull-up resistor to the required logic-supply voltage establishes the high output level. Select that resistor and verify the available sink current from the output-versus-current characteristics in the manufacturer datasheet.
What is the best STMicroelectronics equivalent for LM2903AQM8-13?
The STMicroelectronics LM2903 family is functionally relevant, but the available documentation does not establish an exact ST MPN with the same 8-pin MSOP footprint and automotive-grade ordering code. The ST LM2903 datasheet identifies a comparable dual comparator family, yet package, temperature grade, qualification, and exact pinout must be confirmed before substitution. Use the manufacturer cross-reference tools or request engineering support rather than treating an unspecified LM2903 listing as a drop-in replacement.

Datos de referencia de ingeniería para LM2903AQM8-13 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LM2903AQM8-13 when the circuit requires a dual open-collector comparator in an 8-pin MSOP package and benefits from the tighter 1 mV A-grade input offset specification. It is the appropriate choice for automotive programs requiring AEC-Q100 Grade 1 qualification. Choose LM2903M8-13 for an industrial or consumer design that can tolerate the 2 mV non-A offset specification and does not require automotive qualification. Both devices provide two channels, open-collector outputs, a common-mode input range including ground, and a differential input range equal to the supply voltage. Because the available cross-reference information does not identify five pin-compatible alternatives, substitution should focus on verified MPNs in the same MSOP package rather than similarly named SO-8 or TSSOP-8 variants. Verify input thresholds, supply transients, output pull-ups, and thermal conditions before approving either device.

Comparación con alternativas

Parámetro Este producto LM2903M8-13
Brand Diodes Incorporated Diodes Incorporated
Package 8-pin MSOP 8-pin MSOP
Comparator Configuration Dual differential comparator Dual comparator
Maximum Supply Voltage 36 V 36 V
Input Offset Voltage 1 mV maximum for A grade 2 mV maximum for non-A grade
Output Type Open collector Open collector
Automotive Qualification AEC-Q100 Grade 1 Not identified as AEC-Q100 Grade 1

Diferenciadores clave

  • Lower A-grade input offset limit (frente a LM2903M8-13)
  • Automotive-grade qualification (frente a LM2903M8-13)
  • Retains the same compact package for substitution (frente a LM2903M8-13)

Notas de diseño

Do not treat the open-collector outputs as push-pull logic outputs. Each output requires an external pull-up resistor to a compatible logic supply, and the resistor must be sized so the output transistor remains within its allowable sink-current and saturation-voltage limits. The manufacturer specifies 200 mV low saturation at 4 mA, so use that operating point as a design reference and confirm the actual pull-up voltage and load current against the output-characteristic curve.

Keep the comparator input traces short and route them away from switching nodes, motor windings, high-current return paths, and other sources of coupled noise. Place the supply bypass capacitor close to the supply and ground pins, and make the ground connection follow the manufacturer's application diagram. Input dividers and reference components should be physically close to the corresponding inputs to reduce parasitic pickup and to keep the 1 mV A-grade offset meaningful in sensitive threshold circuits.

Verify the complete input and supply system against the 36 V maximum rating, including transients, automotive load dumps, industrial surges, and startup overshoot. Margin between the maximum transient and 36 V is essential because absolute-maximum limits are not operating points. The differential input range is equal to the power-supply voltage, and the common-mode range includes ground, so resistor-divider calculations must satisfy both constraints across temperature and tolerance.

Account for input offset when defining a switching threshold, rather than treating the reference and comparator inputs as perfectly equal. For the LM2903AQM8-13, the A-grade offset limit is 1 mV, compared with the 2 mV non-A grade. Include reference tolerance, resistor tolerance, input bias error, and temperature effects in the system error budget. This is especially important when selecting LM2903M8-13 as a replacement for a non-automotive design.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Qualified
Libre de plomo
Yes
Libre de halógenos
Yes
Minerales en conflicto
Unknown

According to the Diodes Incorporated LM2903AQ datasheet, the device is totally lead-free, fully RoHS compliant, halogen and antimony free, and qualified to AEC-Q100 Grade 1. Reach and conflict-minerals status are unknown.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM2903AQM8-13 datasheet LM2903AQM8-13 pinout LM2903AQM8-13 datasheet pdf LM2903AQM8-13 equivalent LM2903AQM8-13 replacement LM2903AQM8-13 vs LM2903M8-13 LM2903AQM8-13 MSOP package LM2903AQM8-13 AEC-Q100 Grade 1 LM2903AQM8-13 automotive comparator LM2903AQM8-13 battery monitoring LM2903AQM8-13 price LM2903AQM8-13 stock Diodes Incorporated LM2903AQM8-13 What replaces LM2903AQM8-13?

Componentes & términos relacionados

Diodes Incorporated LM2903AQM8-13 LM2903M8-13 LM2903Q LM2903AQ dual differential comparator analog comparator voltage comparator interface IC semiconductor open-collector output input offset voltage input bias current common-mode input range differential input voltage range 36 V power supply AEC-Q100 Grade 1 RoHS lead-free halogen and antimony free 8-pin MSOP MSOP family surface-mount package automotive battery monitoring industrial control
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ