Texas Instruments

LM2904PWRE4 - Dual 26V 700kHz Op Amp | Texas Instruments

N.º de pieza: LM2904PWRE4 ✓ Activo
26 V Vdss 0.7 mA typical per amplifier Id 8-TSSOP, 0.173 in (4.40 mm) width Package
MOQ: 1 |

LM2904PWRE4 Descripción general

Texas Instruments LM2904PWRE4 is a dual general-purpose operational amplifier with two amplifier circuits, a 700 kHz gain-bandwidth product, and operation up to 26 V in an 8-pin TSSOP package. The device supports single-supply or dual-supply operation and provides a 0.3 V/us slew rate. It is packaged for tape-and-reel manufacturing and identified as automotive temperature grade by the manufacturer ordering information.

An operational amplifier is an analog signal-processing IC that uses high-gain differential amplification to compare or amplify a voltage. In the broader semiconductor hierarchy, the LM2904 belongs to the operational-amplifier family within analog amplifiers and signal-chain ICs. Its dual-circuit configuration allows two independent amplifier channels in one package, reducing board area when a design needs general-purpose voltage amplification, buffering, or signal conditioning.

The principal operating characteristics are its 26 V maximum supply capability, 700 kHz gain-bandwidth product, and 0.3 V/us slew rate. The 8-TSSOP package measures 0.173 inches, or 4.40 mm, in width according to the component listing. Low supply-current operation independent of supply voltage is also identified in the LM2904 datasheet, making the amplifier suitable for power-conscious analog systems that do not require high-speed precision amplification.

The LM2904 uses two independent amplifier sections for general-purpose analog functions. Its bandwidth supports moderate-frequency signal processing rather than high-speed video or RF amplification. A designer should verify gain-bandwidth, slew-rate, output-current capability, input common-mode range, input bias current, and output-voltage swing against the application because those operating limits define whether a conventional non-inverting or inverting topology can meet the required waveform and load conditions.

Typical uses include low-frequency sensor conditioning, audio preamplification, current-to-voltage conversion, general feedback control, and analog signal buffering. Because the IC contains two amplifiers, a single package can implement an instrumentation-style signal chain, a dual-channel filter, or a mixed configuration such as an active filter followed by an output driver. The 8-pin TSSOP footprint is also practical for compact mixed-signal boards.

PCB implementation should provide a short, low-impedance supply path to the device and route sensitive input and feedback connections away from switching nodes. Decoupling capacitors should be placed close to the supply pins, while input and feedback components should be positioned to minimize parasitic capacitance and leakage. Stable operation also depends on keeping output current and capacitive loading within the limits specified by the manufacturer datasheet.

This product page organizes the LM2904PWRE4 specifications, practical application guidance, same-package alternatives, and design considerations into an engineering-focused selection resource. It also highlights where additional device parameters must be checked directly in the manufacturer datasheet before a new analog board is released.

Alternativas directas para LM2904PWRE4 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LM2904PWRE4 (mismo factor de forma y huella) — difiere en Package, Amplifier Type, Packaging, Architecture.

Texas Instruments
Package: 8-TSSOP, 4.40 mm width
Architecture: Voltage feedback, internally frequency compensated
Comparar con LM2904PWRE4 →
Texas Instruments
Package: 8-TSSOP (PW), 0.173 in / 4.40 mm width
Architecture: Two independent, frequency-compensated operational amplifiers
Comparar con LM2904PWRE4 →
Texas Instruments
Package: 8-pin TSSOP, 4.40 mm width
Amplifier Type: Dual general-purpose operational amplifier
Packaging: Tape and reel
Comparar con LM2904PWRE4 →

LM2904PWRG3

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-TSSOP
General Purpose · 2 circuits · Two independent, frequency-compensated operational amplifiers · 26 V · 700 kHz · 0.3 V/us · 0.7 mA · Single supply or split supply

Consulte el precio

Ver hoja de datos →

LM2904PWRG4

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-TSSOP
Dual general-purpose operational amplifier · 2 channels · 26 V · 700 kHz · 0.3 V/us · 0.7 mA · 3 mV · 2 nA

Consulte el precio

Ver hoja de datos →

LM2904BIPWR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-TSSOP
Maintains the 700 kHz gain-bandwidth product and 26 V supply class with 0% core rating difference; revision-specific offset and qualification limits require verification

📋 Alternativa de referencia (no en el catálogo)

LM2904BAIPWR

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-TSSOP
Maintains the 700 kHz gain-bandwidth product and 26 V supply class with 0% core rating difference; revision-specific offset and qualification limits require verification

📋 Alternativa de referencia (no en el catálogo)

LM2904PW

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Texas Instruments
📦 8-TSSOP
2 circuits · Dual general-purpose operational amplifier · 26 V · 700 kHz · 0.7 mA · Independent of supply voltage · Single supply or split supply · Includes ground

Consulte el precio

Ver hoja de datos →

LM2904PWRE4 Valores máximos y características eléctricas

Amplifier Type General Purpose
Number of Circuits 2 circuits
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Slew Rate 0.3 V/us
Single-Supply Operation Supported
Dual-Supply Operation Supported
Encapsulado 8-TSSOP, 0.173 in (4.40 mm) width
Terminal Count 8 terminals
Tipo de montaje Surface Mount
Packaging Tape and Reel (TR)
Temperature Grade Automotive
Corriente de alimentación 0.7 mA typical per amplifier
Input Offset Voltage 3 mV maximum

Guía de configuración de pines de LM2904PWRE4 8-tssop, 0.173 in (4.40 mm) width

Configuración de pines para LM2904PWRE4 (encapsulado 8-tssop, 0.173 in (4.40 mm) width). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-tssop, 0.173 in (4.40 mm) width para LM2904PWRE4

No hay datos detallados de patillaje disponibles para LM2904PWRE4.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LM2904PWRE4 es adecuado para 6 aplicacións: Low-Frequency Sensor Signal Conditioning, Audio Preamplification, Active Filtering and Control Loops, Battery-Powered Analog Measurement, Current-to-Voltage Conversion, Automotive and Industrial Control Interfaces.

🏭

Low-Frequency Sensor Signal Conditioning

The LM2904PWRE4 fits sensor-conditioning stages that amplify small differential signals without requiring high-speed video performance. Its two amplifier channels can implement an instrumentation-style input stage and a second filtering or buffering channel, while the 700 kHz gain-bandwidth product provides bandwidth for common temperature, pressure, and position sensors. The 26 V maximum supply also permits operation from industrial rails above conventional 5 V levels. Before finalizing the circuit, verify the sensor output range against the LM2904 input common-mode limits, confirm adequate output swing, and place the amplifier inputs away from switching and high-current return paths to reduce coupled error.

🎧

Audio Preamplification

The LM2904PWRE4 can serve as a dual audio preamplifier for low-frequency source signals in compact analog equipment. Its 700 kHz gain-bandwidth product is appropriate for voice-band circuitry, and the dual-circuit package allows left and right channel amplification in one 8-TSSOP footprint. The 0.3 V/us slew rate should be checked against the largest expected input amplitude and target closed-loop gain to prevent unintended slew limiting. Use the package's supply pins with local high-frequency bypass capacitance, keep input and feedback traces short, and isolate the audio return path from motor, relay, and switching-converter currents to minimize audible coupling and channel imbalance.

🔧

Active Filtering and Control Loops

The two channels in the LM2904PWRE4 are useful for implementing active filters, integrators, or simple analog control loops where moderate bandwidth and stable operation are more important than high precision. A 700 kHz gain-bandwidth product gives the designer room to select closed-loop gains that preserve signal quality across the intended passband. Component tolerances around the feedback network directly influence cutoff frequency and gain accuracy, so use suitable resistor and capacitor grades and account for parasitic capacitance in the layout. Confirm that the intended operating frequency remains below the amplifier's small-signal and large-signal limits, and avoid driving excessively capacitive loads directly from the output.

📱

Battery-Powered Analog Measurement

The LM2904PWRE4 is appropriate for portable measurement and monitoring circuits that need two analog channels while operating from a single supply. Its low supply-current drain, identified in the Texas Instruments datasheet as independent of supply voltage, supports power-conscious designs, and the device can also run from dual supplies when bipolar signal ranges are required. Because the operational amplifier may share a board with sensors, converters, and indicators, the designer should minimize quiescent loads elsewhere and avoid placing the analog channels near pulsed loads. Validate the complete battery operating range, common-mode headroom, and output swing at the lowest supply voltage before relying on the amplifier for accurate measurements.

📊

Current-to-Voltage Conversion

The LM2904PWRE4 can convert a small current into a measurable voltage when paired with a suitable feedback resistor and low-leakage input network. Its 700 kHz gain-bandwidth product supports bandwidth requirements common to laboratory, instrumentation, and industrial current-measurement circuits, while the dual package allows a second channel for buffer, reference, or gain-stage functions. The precision of the conversion depends strongly on resistor accuracy, input bias current, input offset voltage, and leakage from the sensed node. Keep the high-impedance input path short, use guarding where condensation or board contamination is possible, and verify that the amplifier output remains inside its swing range at both light-load and full-scale conditions.

🚗

Automotive and Industrial Control Interfaces

The LM2904PWRE4 is identified as an automotive-temperature-grade ordering and can support low-frequency interface and control functions within appropriately specified environmental conditions. The dual amplifier arrangement is useful for motor-control feedback conditioning, actuator drive support, or supervisory analog channels, while the 26 V maximum supply provides compatibility with higher-voltage industrial systems. Automotive use requires confirmation of the exact temperature range, qualification status, and AEC-Q100 classification in the ordering information. Keep sensitive feedback connections away from inductive switching nodes, provide local supply bypassing, and test operation across supply transients and temperature corners because package qualification does not by itself validate the completed circuit.

Resumen de productos recomendados

LM2904PWR Texas Instruments Se usa en: Low-Frequency Sensor Signal Conditioning, Audio Preamplification, Battery-Powered Analog Measurement LM2904BIPWR Same-family revised dual amplifier alternative Se usa en: Low-Frequency Sensor Signal Conditioning, Active Filtering and Control Loops, Automotive and Industrial Control Interfaces LM2904BAIPWR Same-family audio amplification alternative Se usa en: Audio Preamplification, Current-to-Voltage Conversion, Automotive and Industrial Control Interfaces LM2904PWRG4 Texas Instruments Se usa en: Active Filtering and Control Loops, Current-to-Voltage Conversion LM2904PW Texas Instruments Se usa en: Battery-Powered Analog Measurement
What is LM2904PWRE4?
The LM2904PWRE4 is a Texas Instruments dual general-purpose operational amplifier with two independent amplifier circuits, a 700 kHz gain-bandwidth product, and a maximum supply rating of 26 V. According to the Texas Instruments LM2904 datasheet, the device is available in an 8-pin TSSOP package and is suitable for conventional analog amplification, buffering, and signal-conditioning circuits.
What are the key specifications of LM2904PWRE4?
The LM2904PWRE4 combines two general-purpose amplifier channels, a 700 kHz gain-bandwidth product, a 0.3 V/us slew rate, and operation up to 26 V in an 8-TSSOP package. The Texas Instruments LM2904 datasheet also identifies low supply-current drain independent of supply voltage, with the component listing specifying 0.7 mA typical supply current.
Where can I download the LM2904PWRE4 datasheet PDF?
The LM2904PWRE4 datasheet and ordering information are available through the Texas Instruments LM2904 product page at https://www.ti.com/product/LM2904. The manufacturer page is the preferred source for the complete pin description, electrical characteristics, ordering table, and application guidance associated with the LM2904 family.
Where can I find the LM2904PWRE4 pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2904 datasheet to assign LM2904PWRE4 PCB connections. The verified component listing confirms an 8-terminal TSSOP package, but it does not provide the individual terminal functions needed to reproduce a reliable pinout on this page.
Can LM2904PWRE4 operate from a single supply?
Yes, the LM2904PWRE4 can operate from a single supply as well as from dual supplies. The Texas Instruments LM2904 datasheet identifies single-supply operation with a maximum total supply of 26 V and describes dual-supply operation with a maximum of plus or minus 13 V for the LM2904.
What is the gain-bandwidth product of LM2904PWRE4?
The LM2904PWRE4 has a gain-bandwidth product of 700 kHz. According to the Texas Instruments LM2904 datasheet, this bandwidth supports general-purpose amplification of moderate-frequency analog signals while operating with a slew rate of 0.3 V/us.
What is the maximum supply voltage for LM2904PWRE4?
The maximum total supply voltage for the LM2904PWRE4 is 26 V. The Texas Instruments LM2904 datasheet describes dual-supply operation up to plus or minus 13 V, equivalent to 26 V across the two supply terminals.
Is LM2904PWRE4 suitable for sensor signal conditioning?
Yes, the LM2904PWRE4 is suitable for many low-frequency sensor signal-conditioning applications because it provides two general-purpose channels, a 700 kHz gain-bandwidth product, and a 0.3 V/us slew rate. Check the input common-mode range, output swing, offset voltage, and bias-current requirements for the particular sensor before finalizing the gain configuration.
When should I choose LM2904PWRE4 instead of LM324?
Choose the LM2904PWRE4 when your design benefits from its 700 kHz gain-bandwidth product, 0.3 V/us slew rate, and 26 V maximum supply rating in an 8-TSSOP package. The LM324 may suit lower-cost designs, but its bandwidth, slew rate, package, and supply ratings should be compared directly against the signal and thermal requirements of the target circuit.
LM2904PWRE4 vs LM2904PWR - which is the better drop-in choice?
Both LM2904PWRE4 and LM2904PWR identify the same 8-TSSOP dual general-purpose amplifier family and share the core 26 V and 700 kHz ratings. The meaningful distinction is the ordering suffix and qualification status, so the correct choice depends on the exact temperature grade, terminal finish, and production requirements stated in the manufacturer ordering table.
What is the best drop-in replacement for LM2904PWRE4?
The closest same-brand drop-in options are LM2904-family 8-TSSOP orderings such as LM2904PWR, LM2904PWRG4, LM2904BIPWR, and LM2904BAIPWR, subject to qualification and suffix verification. A cross-brand replacement cannot be selected safely from package name alone because input bias current, output swing, noise, and temperature limits must also match.
Can LM2904BIPWR replace LM2904PWRE4?
The LM2904BIPWR is a same-family LM2904 ordering in the 8-TSSOP footprint, but it is not automatically interchangeable without a detailed review. The Texas Instruments ordering table must confirm the package, temperature grade, supply rating, electrical limits, and qualification status for both exact MPNs before PCB release.
What can replace LM2904PWRE4?
Replacement starts with an exact 8-TSSOP pin-compatible dual operational amplifier that supports the required supply voltage and signal bandwidth. LM2904-family alternatives such as LM2904PWR, LM2904PWRG4, LM2904BIPWR, and LM2904BAIPWR are the closest same-footprint candidates, but their revision-specific electrical differences must be checked in the manufacturer datasheet.
Where can I request a quote for LM2904PWRE4?
Use the Request a Quote form on this page to request LM2904PWRE4 commercial terms, current availability, and lead time. The form allows the requested quantity and delivery requirements to be reviewed without relying on a static price table that may no longer reflect current inventory.
What is the lead time for LM2904PWRE4?
The current lead time for LM2904PWRE4 is established when the order is quoted. Submit the required quantity, package, and delivery schedule through the Request a Quote form on this page so procurement can confirm the current manufacturing and distribution position.
Is LM2904PWRE4 in stock?
Current inventory status should be confirmed through the Request a Quote form on this page. The available quantity can vary by package suffix and order volume, so a quotation request provides the most useful response for production planning and delivery scheduling.
Does LM2904PWRE4 meet automotive temperature requirements?
The LM2904PWRE4 ordering listing identifies the device as automotive temperature grade. Before using it in a safety- or mission-critical automotive circuit, confirm the exact operating temperature range, qualification status, and AEC-Q100 classification in the Texas Instruments LM2904 ordering information.

Datos de referencia de ingeniería para LM2904PWRE4 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LM2904PWRE4 when a design needs two general-purpose amplifier channels, operation from a supply up to 26 V, a 700 kHz gain-bandwidth product, and an 8-TSSOP footprint. It is well suited to low-frequency sensor conditioning, audio preamplification, active filtering, and industrial control interfaces. LM2904PWR is the closest ordering alternative when the electrical requirements match and the desired qualification or terminal-finish designation differs. LM2904PWRG4 may be preferred when its specific finish and qualification terms suit the production program. LM2904BIPWR and LM2904BAIPWR may fit revisions with different offset or application requirements, but their exact limits must be checked before substitution. Avoid choosing any alternative solely from the package code: verify pin names, temperature grade, common-mode range, output swing, bias current, offset voltage, and qualification. For designs requiring greater bandwidth, lower offset, rail-to-rail output, or lower noise, a different operational-amplifier family may be more appropriate even if the footprint appears similar.

Comparación con alternativas

Parámetro Este producto LM2904PWR LM2904PWRG4 LM2904BIPWR LM2904BAIPWR LM2904PW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP 8-TSSOP
Amplifier Circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits 2 circuits
Maximum Supply Voltage 26 V 26 V 26 V 26 V 26 V 26 V
Gain-Bandwidth Product 700 kHz 700 kHz 700 kHz 700 kHz 700 kHz 700 kHz
Slew Rate 0.3 V/us 0.3 V/us 0.3 V/us 0.3 V/us 0.3 V/us 0.3 V/us

Diferenciadores clave

  • Dual amplifier channels in a compact 8-TSSOP package (frente a LM324)
  • Higher bandwidth than the traditional LM324 performance class (frente a LM324)
  • Automotive-temperature-grade ordering (frente a LM2904PWR)

Notas de diseño

Place the supply-bypass capacitor immediately between the positive supply and ground pins, with the ground connection following the shortest practical return path. Keep the two amplifier inputs and their feedback components away from switching nodes, relay coils, motor traces, and high-current return paths. Because both channels share the same package and supply pins, coupling between channels can occur if their sensitive inputs run parallel near each other.

Treat the input and feedback networks as high-impedance analog paths when the source impedance is appreciable. Keep traces short, avoid routing them beneath digital or power-converter sections, and use a continuous ground plane where possible. The 700 kHz gain-bandwidth product is adequate for moderate-frequency signals, but excessive noise gain, capacitive loading, or high closed-loop gain can reduce stability and increase susceptibility to parasitic oscillation.

Verify the actual input voltage, output swing, and output-current demand for each amplifier channel. The 26 V value is a maximum supply rating, not a recommended operating point, and designers should include tolerance for supply variation and transient overshoot. If the device operates from a single rail, calculate whether the required output waveform remains above the lower output-swing limit throughout the signal cycle.

Do not infer complete electrical equivalence from a shared TSSOP footprint. Before substituting an LM2904-family ordering, compare the exact package drawing, pin names, temperature grade, qualification status, supply limits, offset voltage, input bias current, output swing, and load-current specification. A footprint-compatible part can still fail if revision-specific limits change the usable signal range or qualification requirements of the finished design.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The ordering listing identifies automotive temperature grade, but the verified records do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes in the Texas Instruments product page or manufacturer documentation before qualification.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LM2904PWRE4 datasheet LM2904PWRE4 datasheet pdf LM2904PWRE4 pinout LM2904PWRE4 equivalent LM2904PWRE4 replacement LM2904PWRE4 footprint LM2904PWRE4 price LM2904PWRE4 stock Texas Instruments LM2904PWRE4 LM2904 26V 700kHz op amp LM2904PWRE4 TSSOP-8 LM2904PWRE4 sensor conditioning LM2904PWRE4 vs LM2904PWR LM2904PWRE4 audio preamplifier LM2904PWRE4 lead time

Componentes & términos relacionados

Texas Instruments LM2904PWRE4 LM2904PWR LM2904PWRG4 LM2904BIPWR LM2904BAIPWR LM2904PW LM324 dual operational amplifier operational amplifier analog amplifier signal-conditioning IC general-purpose amplifier TSSOP-8 TSSOP surface-mount package gain-bandwidth product slew rate input common-mode range input offset voltage single-supply operation dual-supply operation RoHS REACH AEC-Q100
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ