LM393M - Dual Open-Collector Comparator | Texas Instruments
N.º de pieza: LM393M ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
LM393M Descripción general
What is a dual differential comparator? A comparator is an analog integrated circuit that compares two input voltages and produces a binary high-or-low result according to their relationship. A differential comparator includes both a non-inverting and an inverting input. The LM393M contains two such channels, making it useful for independent threshold decisions in one package. It belongs to the comparator, analog IC, and semiconductor hierarchy rather than being an amplifier; the output intentionally indicates which input is higher instead of reproducing an analog signal.
The key verified feature set includes two differential comparators, an 8-SOIC surface-mount package, open-collector outputs, a 1.4 microsecond response time, and a 2 V to 36 V comparator supply specification. The distributor comparison material also lists differential input and output-current information, while the supplied search results identify the device as suitable for general-purpose comparison. Because the output transistor is open collector, output high level depends on the pull-up resistor and supply rail, not on a push-pull output driver.
The two channels are independent, allowing the device to compare two separate sensor or control signals. The common open-collector output architecture can be useful in power-monitoring circuits where several comparator outputs must combine logically, provided the system uses suitable pull-up resistors and does not exceed the device's electrical limits. The SOIC-8 package supports conventional surface-mount assembly, while the dual channel count can reduce board area compared with two single comparators.
Typical applications include battery and power-supply monitoring, overvoltage and undervoltage protection, sensor threshold detection, industrial control logic, window or level monitoring, and general digital control systems. The 2 V to 36 V comparator supply range provides useful flexibility for industrial and embedded systems, although the complete operating conditions must be checked against the manufacturer datasheet.
A key design consideration is the open-collector output. Add a pull-up resistor to each output, choose its value with the required sink-current and rise-time limits in mind, and ensure that the downstream device accepts the resulting logic level. Do not assume that the output can source current independently. The input common-mode range, output saturation levels, supply current, and absolute maximum ratings are not fully specified in the supplied verified data and must be confirmed before design release.
This page combines the verified distributor identity, package information, comparator function, search-result specifications, available cross-reference sources, and practical design guidance. It does not invent unprovided offset, temperature, response-current, or compliance details; unavailable parameters are identified for engineering follow-up.
Alternativas directas para LM393M — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LM393M (mismo factor de forma y huella) — difiere en Package, Mounting Type, Output Type, Common-Mode Input Range, Operating Temperature Range.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
LM393D
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$0.11 / unidad
Ver hoja de datos →LM393N
✅ Sustitución directa✓ En stock
$0.18 / unidad
Ver hoja de datos →LM393M
✅ Sustitución directa✓ En stock
Consulte el precio
Ver hoja de datos →LM393DR
✅ Sustitución directa✓ En stock
$0.11 / unidad
Ver hoja de datos →LM393B
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
LM393M Valores máximos y características eléctricas
| Product Type | Dual differential comparator |
| Number of Comparator Channels | 2 |
| Tipo de salida | Open-Collector |
| Comparator Class | Standard general purpose |
| Supply Voltage Range | 2 V to 36 V |
| Response Time | 1.4 microseconds |
| Encapsulado | 8-SOIC |
| Número de pines | 8 pins |
| Tipo de montaje | Surface mount |
| Supply Configuration | Single or dual supply |
| Input Configuration | Differential input |
| Output Pull-Up | External pull-up resistor required |
| Output Current | 18 mA at 5 V |
| Case Style | SOIC-8 |
Guía de configuración de pines de LM393M soic-8
Configuración de pines para LM393M (encapsulado soic-8). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.
No hay datos detallados de patillaje disponibles para LM393M.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LM393M es adecuado para 6 aplicacións: Battery Voltage Monitoring, Overvoltage and Undervoltage Protection, Industrial Sensor Threshold Detection, Window and Level Monitoring, Open-Collector Logic Interfacing, Portable and Low-Voltage Control.
Battery Voltage Monitoring
The LM393M fits battery threshold monitoring because it provides two independent differential comparator channels in one 8-SOIC package, with a verified 2 V to 36 V comparator supply range. Each channel can compare a resistor-divided battery signal against a reference threshold. The open-collector outputs can pull down separate status or fault lines, while pull-up resistors define the logic-high state. The 1.4 microsecond listed response time is useful for protection signaling, although actual response depends on input overdrive and load. Designers must confirm input common-mode range and supply-current limits in the manufacturer datasheet before selecting resistor values.
Recomendado
Overvoltage and Undervoltage Protection
LM393M is appropriate for dual-rail protection because its two differential channels can independently monitor a positive and negative threshold condition. Place resistor dividers on the supply being monitored, compare each divided voltage with a reference, and use the open-collector outputs to control a shutdown, enable, or alarm input through pull-up resistors. The verified 1.4 microseconds response time provides a defined switching specification for fast threshold transitions. The key engineering constraint is that the input and output levels must remain within the verified supply and device ratings; no unverified common-mode or absolute-maximum values should be assumed.
Recomendado
Industrial Sensor Threshold Detection
The LM393M can convert analog sensor outputs into digital threshold events for industrial control systems. One channel can monitor a process signal against an adjustable setpoint and the other can monitor a second sensor, alarm state, or complementary condition. Its differential input structure and dual-channel 8-SOIC package reduce component count while preserving independent decisions. The open-collector outputs are useful when the alarm must drive a pull-up-protected relay driver, optocoupler, or PLC input, but the pull-up rail and sink current must be checked. Verify input bias current, common-mode range, and output saturation from the official datasheet.
Recomendado
Window and Level Monitoring
LM393M is useful for upper- and lower-bound monitoring because its two independent comparator channels can implement a window detector with one inverting input and one non-inverting input per threshold arrangement. Use resistor dividers or a reference network to establish upper and lower limits, then combine the open-collector states externally when a system-level fault indication is required. The 2 V to 36 V supply specification supports a range of industrial and embedded supply environments, but the monitored signal must remain inside the comparator input limits. The listed 1.4 microseconds response time helps minimize transition delay when the measured level crosses a threshold.
Recomendado
Open-Collector Logic Interfacing
LM393M is well suited to simple logic interfaces where the output must connect to a pull-up-based digital bus, alarm system, or relay-control input. Each open-collector output can remain disconnected when not driving a load or can sink current from a selected pull-up rail, allowing the interface voltage to be chosen independently of the comparator supply within device constraints. This arrangement can simplify wired-AND behavior and level translation. The external resistor determines both the sink current and output rise time, so calculate it from the load capacitance, required logic current, and allowed output current rather than selecting a value blindly.
Recomendado
Portable and Low-Voltage Control
LM393M can be considered for portable equipment when the system operates within the comparator's verified 2 V to 36 V supply range and the open-collector output is compatible with the load. The dual-channel architecture supports two threshold decisions without requiring two separate packages, which can save board area in a compact control board. Power consumption is not quantified in the supplied verified data, so battery-life calculations must use the manufacturer datasheet rather than an assumed supply-current value. Pull-up resistors should be selected to minimize static current while keeping switching timing acceptable for the target logic family.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LM393M — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LM393D | LM393N | LM393M | LM393DR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | STMicroelectronics | onsemi | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Comparator Channels | 2 | 2 | 2 | 2 | 2 |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
| Special Feature | Dual differential comparator | LM393-family comparator | Dual comparator | General-purpose comparator | LM393-family comparator |
Diferenciadores clave
- Two independent comparator channels in one 8-SOIC package (frente a LM393N)
- Open-collector output architecture (frente a LM393M)
- 1.4 microsecond listed response time (frente a LM393N)
- 18 mA output current at 5 V (frente a LM393N)
Notas de diseño
Do not treat the LM393M output as a push-pull logic driver. Each open-collector output needs a pull-up resistor, and the resistor value determines the high-level current, output rise time, and permissible sink current. Check the downstream input current and load capacitance before choosing the pull-up network. The verified listing confirms the open-collector architecture but does not provide a complete output-current curve, so final resistor values must be checked against the manufacturer datasheet.
Keep the comparator input traces short and route them away from high-current switching nodes and noisy digital clocks. Place the input network and any reference components close to the relevant LM393M pins, while keeping the pull-up resistor close to the output pin to minimize parasitic capacitance. Because the supplied data does not include a complete pinout or recommended layout, verify the official package drawing and pin numbering during PCB release.
Use a supply rail within the verified 2 V to 36 V comparator range and confirm the input signals remain inside the device's allowed common-mode limits. For dual-supply designs, verify both positive and negative rail limits against the absolute maximum ratings. The verified search results do not provide quiescent current, input bias current, or exact common-mode limits, so these values must be obtained from the official datasheet before sizing the power budget.
Información de cumplimiento
The supplied verified results do not state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status. No compliance claim is inferred.
