LPC11U68JBD64E - 50MHz Cortex-M0+ 256KB MCU | NXP
N.º de pieza: LPC11U68JBD64E ✓ ActivoLPC11U68JBD64E Descripción general
A microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The Arm Cortex-M0+ core uses a compact instruction architecture intended to deliver efficient 32-bit processing with lower code-size requirements than many more complex processor architectures. Within the product hierarchy, the LPC11U68JBD64E is an MCU, a microcontroller, and an embedded semiconductor designed for control-oriented embedded systems.
The LPC11Uxx family supports CPU frequencies up to 50 MHz and includes flexible, configurable peripherals intended to replace combinations of 8-bit and 16-bit devices. Its 256 KB flash capacity provides room for substantially larger firmware than basic entry-level controllers, while the 64-LQFP package provides 64 accessible peripheral and power pins. The family is also identified by NXP as an Arm Cortex-M0+/M0-based scalable entry-level MCU family.
The LPC11U68JBD64E is particularly relevant to designs that need more capability than a simple 8-bit controller but do not require a high-performance Cortex-M3, Cortex-M4, or Cortex-M7 processor. Its combination of 50 MHz operation, 256 KB flash, and 64-LQFP packaging supports compact control boards with mixed analog and digital peripherals. The exact peripheral mix, RAM capacity, voltage limits, and pin functions must be confirmed against the manufacturer datasheet before circuit design.
Typical uses include industrial control modules, smart meters, sensor-hub boards, compact motor controllers, building automation equipment, and connected IoT products. In these systems, the MCU can coordinate sensors, apply control logic, supervise actuators, and manage serial communications. Firmware portability can also benefit engineers moving from simpler 8-bit architectures because the Cortex-M0+ platform provides a 32-bit ecosystem while retaining a comparatively simple programming model.
PCB planning should account for the exposed dimensions, lead pitch, and pin assignments of the 64-LQFP footprint. Place decoupling capacitors close to supply pins, route sensitive analog signals away from fast digital edges, and confirm every unused pin according to the datasheet. Programming and firmware configuration details should likewise be checked in the NXP product documentation.
This product page consolidates the verified manufacturer identity, core frequency, flash capacity, package details, lifecycle information, source links, and application-focused engineering guidance. It also distinguishes exact drop-in alternatives from options that require different packages or firmware qualification, helping designers make a PCB-compatible sourcing decision without overlooking firmware or peripheral differences.
Alternativas directas para LPC11U68JBD64E — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con LPC11U68JBD64E (mismo factor de forma y huella) — difiere en Package, Product Type, Maximum CPU Frequency, Flash Memory, Architecture.
LPC11U68JBD64K
✅ Sustitución directaConsulte el precio
Ver hoja de datos →LPC11U68JBD64E Valores máximos y características eléctricas
| Product Type | 32-bit microcontroller (MCU) |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| Encapsulado | 64-LQFP, 10 mm x 10 mm |
| Terminal Count | 64 terminals |
| Tipo de montaje | Surface mount |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Product Family | LPC11Uxx scalable entry-level MCU family |
| Instruction Set | Arm Cortex-M0+/M0 architecture |
| Application Targets | Industrial control, IoT devices, embedded automation, motor control, and metering |
| Estado del ciclo de vida | Active |
Guía de configuración de pines de LPC11U68JBD64E square
Configuración de pines para LPC11U68JBD64E (encapsulado square). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para LPC11U68JBD64E.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
LPC11U68JBD64E es adecuado para 6 aplicacións: Industrial Control Modules, IoT Sensor Hubs, Smart Metering, Compact Motor Controllers, Building Automation Equipment, Embedded Data Acquisition.
Industrial Control Modules
The LPC11U68JBD64E fits compact industrial-control modules that combine sensor acquisition, digital logic, actuator supervision, and status communications. Its Arm Cortex-M0+ core can operate up to 50 MHz, while 256 KB of flash leaves useful room for control software, diagnostics, parameter tables, and communication routines. The 64-LQFP package offers 64 terminals for mixed power, digital, analog, and serial functions. Engineers should verify the required peripheral mix, voltage range, and industrial temperature details in the manufacturer datasheet before schematic freeze.
Recomendado
IoT Sensor Hubs
The LPC11U68JBD64E is suitable for IoT sensor hubs that aggregate readings from multiple sensors and perform local filtering or threshold decisions before network transmission. A 50 MHz Cortex-M0+ processor provides useful control headroom without moving into a higher-complexity processor class, and the 256 KB flash capacity supports application firmware and communication configuration. The 64-LQFP footprint simplifies access to external sensing, debug, and serial interfaces. Confirm the exact UART, SPI, I2C, and timer resources required by the selected board configuration.
Recomendado
Smart Metering
For smart-metering designs, the LPC11U68JBD64E can manage measurement sequencing, data conditioning, calibration constants, and low-bandwidth communications. Its 256 KB flash accommodates more application code and configuration data than basic 8-bit controllers, while the 32-bit Cortex-M0+ architecture simplifies handling of protocols and arithmetic-heavy routines. The 64-LQFP package provides a broad I/O selection for sensor inputs, display interfaces, and communications. Validate metering-specific timing, accuracy, low-power behavior, and peripheral assignments against the NXP datasheet.
Recomendado
Compact Motor Controllers
The LPC11U68JBD64E can serve as the supervisory controller in compact motor-control systems, executing control logic, monitoring position or speed inputs, sequencing outputs, and handling fault conditions. Its 50 MHz Cortex-M0+ performance supports responsive firmware while maintaining a relatively simple embedded architecture, and the 256 KB flash provides space for algorithms and diagnostics. The 64-LQFP package exposes enough pins for control signals and communications. Check timer features, PWM resources, analog channels, and external power-device requirements before assigning the MCU.
Recomendado
Building Automation Equipment
The LPC11U68JBD64E fits building-automation nodes that coordinate environmental sensors, remote inputs, actuators, and communication links. Its 32-bit Cortex-M0+ core runs up to 50 MHz for protocol processing and control tasks, while 256 KB of flash supports networking, diagnostics, and configuration firmware. The 64-LQFP package is practical for equipment boards requiring numerous external connections and inspectable surface-mount assembly. Validate standby-power requirements, communications peripherals, watchdog behavior, and environmental ratings against the complete manufacturer documentation.
Recomendado
Embedded Data Acquisition
The LPC11U68JBD64E can coordinate embedded data-acquisition systems that sample multiple inputs, perform digital filtering, maintain operating state, and forward results. The 50 MHz Cortex-M0+ processor offers more arithmetic headroom than a basic 8-bit MCU, and the 256 KB flash can retain firmware for acquisition, buffering, and communication. Its 64-LQFP package provides extensive pin access for sensors and control signals. Engineers should confirm the required ADC or timer resources, input limits, sampling synchronization, and data-retention options in the datasheet.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para LPC11U68JBD64E — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | LPC11U68JBD64 |
|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+/M0 family |
| Maximum CPU Frequency | 50 MHz | Up to 50 MHz |
| Architecture | 32-bit RISC | 32-bit microcontroller |
| Lifecycle Status | Active | Active |
Diferenciadores clave
- Higher-performance upgrade path from simple 8-bit controllers (frente a MC74F243M)
- Larger program-memory capacity for embedded control firmware (frente a AT90CAN64-16MUR)
- Compact 64-LQFP integration with a broad pin count (frente a ATXMEGA128B1-CU)
Notas de diseño
Use the NXP package drawing and land pattern for the 64-LQFP, 10 mm × 10 mm package. Preserve clearance around fine-pitch leads and avoid placing tall components where they can interfere with tooling or inspection. Confirm pin-1 orientation in the PCB footprint and assembly documentation, since incorrect orientation can prevent programming or cause power rails to be shorted during assembly.
Place all required decoupling capacitors immediately adjacent to the corresponding supply and ground pins, and follow the capacitor values and layout specified in the manufacturer datasheet. Keep high-current return paths compact so switching and control-loop currents do not share narrow copper traces with sensitive signal returns. Verify minimum and maximum operating voltages, regulator sequencing, and power-consumption requirements against the complete electrical specifications.
Separate analog sensor inputs, oscillator connections, and programming signals from fast digital switching traces where the board layout permits. Use short return paths, maintain consistent impedance where communication lines require it, and place sensitive passive components close to their associated pins. Review the pin multiplexing and recommended analog configuration because an alternate-function or GPIO misassignment can degrade measurement or communication reliability.
Do not substitute a microcontroller solely because the package and CPU frequency look similar. Firmware migration also depends on memory-map compatibility, peripheral availability, interrupt assignments, clock architecture, and the exact package pinout. For LPC11U68JBD64 versus LPC11U68JBD64E, verify the complete ordering code and any suffix-specific differences before releasing a production build.
Información de cumplimiento
The product information identifies the device as an industrial-temperature-grade microcontroller but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.