NXP Semiconductors

LPC11U68JBD64E - 50MHz Cortex-M0+ 256KB MCU | NXP

MPN: LPC11U68JBD64E ✓ פעיל
64-LQFP, 10 mm x 10 mm Package 50 MHz Speed 256 KB Memory
כמות הזמנה מינימלית: 1 |

LPC11U68JBD64E סקירה

NXP Semiconductors LPC11U68JBD64E is an Arm Cortex-M0+ 32-bit microcontroller operating at up to 50 MHz, with 256 KB of embedded flash memory, in a 64-LQFP 10 mm × 10 mm package. The device belongs to the LPC11Uxx family of scalable, low-cost microcontrollers designed for embedded control, industrial automation, connected equipment, metering, motor control, and low-power IoT designs.

A microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The Arm Cortex-M0+ core uses a compact instruction architecture intended to deliver efficient 32-bit processing with lower code-size requirements than many more complex processor architectures. Within the product hierarchy, the LPC11U68JBD64E is an MCU, a microcontroller, and an embedded semiconductor designed for control-oriented embedded systems.

The LPC11Uxx family supports CPU frequencies up to 50 MHz and includes flexible, configurable peripherals intended to replace combinations of 8-bit and 16-bit devices. Its 256 KB flash capacity provides room for substantially larger firmware than basic entry-level controllers, while the 64-LQFP package provides 64 accessible peripheral and power pins. The family is also identified by NXP as an Arm Cortex-M0+/M0-based scalable entry-level MCU family.

The LPC11U68JBD64E is particularly relevant to designs that need more capability than a simple 8-bit controller but do not require a high-performance Cortex-M3, Cortex-M4, or Cortex-M7 processor. Its combination of 50 MHz operation, 256 KB flash, and 64-LQFP packaging supports compact control boards with mixed analog and digital peripherals. The exact peripheral mix, RAM capacity, voltage limits, and pin functions must be confirmed against the manufacturer datasheet before circuit design.

Typical uses include industrial control modules, smart meters, sensor-hub boards, compact motor controllers, building automation equipment, and connected IoT products. In these systems, the MCU can coordinate sensors, apply control logic, supervise actuators, and manage serial communications. Firmware portability can also benefit engineers moving from simpler 8-bit architectures because the Cortex-M0+ platform provides a 32-bit ecosystem while retaining a comparatively simple programming model.

PCB planning should account for the exposed dimensions, lead pitch, and pin assignments of the 64-LQFP footprint. Place decoupling capacitors close to supply pins, route sensitive analog signals away from fast digital edges, and confirm every unused pin according to the datasheet. Programming and firmware configuration details should likewise be checked in the NXP product documentation.

This product page consolidates the verified manufacturer identity, core frequency, flash capacity, package details, lifecycle information, source links, and application-focused engineering guidance. It also distinguishes exact drop-in alternatives from options that require different packages or firmware qualification, helping designers make a PCB-compatible sourcing decision without overlooking firmware or peripheral differences.

חלופות תחליף ישיר עבור LPC11U68JBD64E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם LPC11U68JBD64E (אותו גורם צורה וטביעת רגל) — שונים ב Package, Product Type, Maximum CPU Frequency, Flash Memory, Architecture.

NXP Semiconductors
Product Type: 32-bit embedded microcontroller
השווה עם LPC11U68JBD64E →
NXP Semiconductors
Package: 64-LQFP (10 mm x 10 mm)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Flash Memory: 128 KB (128K x 8)
השווה עם LPC11U68JBD64E →
NXP Semiconductors
Package: 64-LQFP (10 mm x 10 mm)
Product Type: 32-bit embedded microcontroller
השווה עם LPC11U68JBD64E →
NXP Semiconductors
Package: 100-LQFP (14 x 14 mm)
Maximum CPU Frequency: 100 MHz
Architecture: ARM Cortex-M3, 32-bit RISC
השווה עם LPC11U68JBD64E →

LPC11U68JBD64K

✅ Drop-In
NXP Semiconductors
📦 64-LQFP (10 mm x 10 mm)
32-bit embedded microcontroller · NXP Semiconductors · Arm Cortex-M0+/M0 · 50 MHz · 32 bit · 256 KB · 256K x 8 bit · LPC11Uxx

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

LPC11U68JBD64E דירוגים מרביים ומאפיינים חשמליים

Product Type 32-bit microcontroller (MCU)
Processor Core Arm Cortex-M0+
Maximum CPU Frequency 50 MHz
Architecture 32-bit RISC
Flash Memory 256 KB
Flash Organization 256K x 8
מארז 64-LQFP, 10 mm x 10 mm
Terminal Count 64 terminals
סוג הרכבה Surface mount
Terminal Form Gull wing
Package Code LFQFP
Package Shape Square
Temperature Grade Industrial
Product Family LPC11Uxx scalable entry-level MCU family
Instruction Set Arm Cortex-M0+/M0 architecture
Application Targets Industrial control, IoT devices, embedded automation, motor control, and metering
סטטוס מחזור חיים Active

מדריך תצורת פינים של LPC11U68JBD64E square

תצורת פינים עבור LPC11U68JBD64E (מארזת square). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת square עבור LPC11U68JBD64E

אין נתוני פריסת פינים מפורטים עבור LPC11U68JBD64E.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LPC11U68JBD64E מתאים עבור 6 יישוםs: Industrial Control Modules, IoT Sensor Hubs, Smart Metering, Compact Motor Controllers, Building Automation Equipment, Embedded Data Acquisition.

🏭

Industrial Control Modules

The LPC11U68JBD64E fits compact industrial-control modules that combine sensor acquisition, digital logic, actuator supervision, and status communications. Its Arm Cortex-M0+ core can operate up to 50 MHz, while 256 KB of flash leaves useful room for control software, diagnostics, parameter tables, and communication routines. The 64-LQFP package offers 64 terminals for mixed power, digital, analog, and serial functions. Engineers should verify the required peripheral mix, voltage range, and industrial temperature details in the manufacturer datasheet before schematic freeze.

🧩

IoT Sensor Hubs

The LPC11U68JBD64E is suitable for IoT sensor hubs that aggregate readings from multiple sensors and perform local filtering or threshold decisions before network transmission. A 50 MHz Cortex-M0+ processor provides useful control headroom without moving into a higher-complexity processor class, and the 256 KB flash capacity supports application firmware and communication configuration. The 64-LQFP footprint simplifies access to external sensing, debug, and serial interfaces. Confirm the exact UART, SPI, I2C, and timer resources required by the selected board configuration.

🔧

Smart Metering

For smart-metering designs, the LPC11U68JBD64E can manage measurement sequencing, data conditioning, calibration constants, and low-bandwidth communications. Its 256 KB flash accommodates more application code and configuration data than basic 8-bit controllers, while the 32-bit Cortex-M0+ architecture simplifies handling of protocols and arithmetic-heavy routines. The 64-LQFP package provides a broad I/O selection for sensor inputs, display interfaces, and communications. Validate metering-specific timing, accuracy, low-power behavior, and peripheral assignments against the NXP datasheet.

⚡

Compact Motor Controllers

The LPC11U68JBD64E can serve as the supervisory controller in compact motor-control systems, executing control logic, monitoring position or speed inputs, sequencing outputs, and handling fault conditions. Its 50 MHz Cortex-M0+ performance supports responsive firmware while maintaining a relatively simple embedded architecture, and the 256 KB flash provides space for algorithms and diagnostics. The 64-LQFP package exposes enough pins for control signals and communications. Check timer features, PWM resources, analog channels, and external power-device requirements before assigning the MCU.

🏭

Building Automation Equipment

The LPC11U68JBD64E fits building-automation nodes that coordinate environmental sensors, remote inputs, actuators, and communication links. Its 32-bit Cortex-M0+ core runs up to 50 MHz for protocol processing and control tasks, while 256 KB of flash supports networking, diagnostics, and configuration firmware. The 64-LQFP package is practical for equipment boards requiring numerous external connections and inspectable surface-mount assembly. Validate standby-power requirements, communications peripherals, watchdog behavior, and environmental ratings against the complete manufacturer documentation.

📟

Embedded Data Acquisition

The LPC11U68JBD64E can coordinate embedded data-acquisition systems that sample multiple inputs, perform digital filtering, maintain operating state, and forward results. The 50 MHz Cortex-M0+ processor offers more arithmetic headroom than a basic 8-bit MCU, and the 256 KB flash can retain firmware for acquisition, buffering, and communication. Its 64-LQFP package provides extensive pin access for sensors and control signals. Engineers should confirm the required ADC or timer resources, input limits, sampling synchronization, and data-retention options in the datasheet.

סיכום מוצרים מומלצים

What are the key specifications of LPC11U68JBD64E that engineers should know?
The LPC11U68JBD64E is a 32-bit Arm Cortex-M0+ microcontroller rated for operation up to 50 MHz, with 256 KB of flash organized as 256K x 8 and a 64-LQFP 10 mm × 10 mm package. According to the NXP LPC11U68JBD64 product information, the device is active and belongs to the scalable LPC11Uxx microcontroller family. These core specifications position it between simple 8-bit controllers and more complex Cortex-M processors for embedded control designs.
What type of microcontroller is LPC11U68JBD64E?
The LPC11U68JBD64E is a 32-bit RISC microcontroller based on the Arm Cortex-M0+ core. NXP describes the LPC11Uxx family as a low-cost platform for replacing 8-bit and 16-bit microcontroller operations while improving processing capability and code-size efficiency. The target includes industrial control, embedded automation, meter, sensor, and IoT equipment, making the device a configurable embedded-control building block.
What is the operating frequency of LPC11U68JBD64E?
The LPC11U68JBD64E operates at CPU frequencies of up to 50 MHz. This figure comes from the NXP LPC11Uxx family description and the product listing for the exact MPN. A 50 MHz clock provides additional processing margin for concurrent peripheral activity, control logic, and communication routines, although actual application performance also depends on the selected clock configuration and firmware workload.
How much flash memory does LPC11U68JBD64E have?
The LPC11U68JBD64E contains 256 KB of embedded flash memory with an organization of 256K x 8. This storage capacity is useful for firmware, configuration data, boot code, and application constants. The exact product listing identifies this flash configuration directly. When sizing the design, reserve space for bootloader updates, calibration values, diagnostics, and future revisions so deployed firmware does not consume the entire device memory.
What package does LPC11U68JBD64E use?
The LPC11U68JBD64E uses a 64-LQFP package measuring 10 mm × 10 mm. It has 64 gull-wing terminals and a square package shape, making it suitable for compact, surface-mount PCB designs. Because LQFP leads are relatively fine and can bend during handling, use the manufacturer land pattern and inspect solder joints carefully after assembly. The package provides more I/O options than smaller lead-count MCU packages.
Where can I download the LPC11U68JBD64E datasheet PDF?
The official LPC11U68JBD64E datasheet can be accessed through the NXP part page at https://www.nxp.com/part/LPC11U68JBD64. That product page provides the Data Sheet and product-change information for the device. Use the NXP document for authoritative pin descriptions, electrical limits, memory details, peripheral assignments, programming information, and package drawings before releasing the PCB design.
Where can I find the LPC11U68JBD64E pinout?
The LPC11U68JBD64E pinout is located in the manufacturer datasheet and the package drawing linked from the NXP product page. Use that information to map power, ground, reset, programming, clock, and peripheral signals to the 64-LQFP footprint. Do not infer unused-pin connections from a generic package diagram, and verify alternate-function selections because several pins can serve multiple hardware roles depending on firmware configuration.
What can replace LPC11U68JBD64E?
The closest verified replacement is LPC11U68JBD64, which is the same LPC11U68JBD64 device family member listed by NXP without the final E ordering suffix. The manufacturer lists the base LPC11U68JBD64 as active, but the exact ordering-code differences must be checked before substitution. No cross-manufacturer drop-in replacement was established because MCU drop-in status depends on identical package, pinout, memory, peripherals, clocks, and firmware compatibility.
Is LPC11U68JBD64E the same as LPC11U68JBD64?
LPC11U68JBD64E and LPC11U68JBD64 identify the same underlying LPC11U68JBD64 device family, with the final E character forming part of the ordering code. NXP lists the base LPC11U68JBD64 product as active and the exact LPC11U68JBD64E orderable part in distributor listings. Confirm the full ordering code, packing method, temperature grade, and any suffix-specific commercial terms before treating them as interchangeable procurement items.
Is LPC11U68JBD64E suitable for industrial control and IoT devices?
The LPC11U68JBD64E is suitable for industrial-control and IoT designs that fit its 50 MHz Arm Cortex-M0+ performance and 256 KB flash capacity. Its LPC11Uxx family positioning specifically includes embedded automation, industrial control, metering, motor control, and IoT devices. Suitability for a particular product still depends on operating voltage, peripheral coverage, environmental exposure, functional safety requirements, and communication-interface availability.
When should I choose LPC11U68JBD64E instead of a basic 8-bit MCU?
Choose LPC11U68JBD64E when the design needs 32-bit processing, higher clock speed, and 256 KB of flash beyond the arithmetic and memory limits of an 8-bit controller. Its Cortex-M0+ architecture also provides a modern low-complexity software ecosystem and a strong foundation for protocols, control loops, and data handling. Retain an 8-bit MCU when extreme simplicity, lower cost, or fewer I/O requirements dominate the design.
LPC11U68JBD64E vs LPC11U68JBD64 - which one should I order?
Both names refer to the LPC11U68JBD64 product family and share the 50 MHz Cortex-M0+ architecture and 256 KB flash configuration. The decision centers on the exact NXP ordering suffix, packing configuration, and commercial conditions attached to the full MPN. NXP lists LPC11U68JBD64 as active, while LPC11U68JBD64E is separately cataloged by distributors. Validate the complete ordering information before placing the design into production.
Where can I buy LPC11U68JBD64E online?
Use the Request a Quote form on this page to request LPC11U68JBD64E pricing, stock confirmation, and lead time from XAIPART. The quote workflow is the appropriate route for commercial availability because inventory and pricing can change with order quantity, packing method, and market conditions. Share the exact MPN and required quantity so the supplier can confirm the correct active ordering configuration.
What is the price of LPC11U68JBD64E?
Submit the LPC11U68JBD64E Request a Quote form on this page to obtain current pricing. The final amount can depend on quantity, reel or tray packing, and supply conditions, so a static price may not reflect the selected procurement plan. Include the target quantity, desired package format, and delivery location in the request for a commercially actionable quotation.
What is the lead time and stock status for LPC11U68JBD64E?
Request the current LPC11U68JBD64E lead time, minimum order quantity, and stock status through the Request a Quote form on this page. NXP identifies the related LPC11U68JBD64 product as active, but that status does not by itself guarantee current stock or a production lead time. Supply confirmation should be requested for the exact full ordering code and required quantity.

נתוני עזר הנדסיים עבור LPC11U68JBD64E — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LPC11U68JBD64E when a control design needs a 32-bit Cortex-M0+ core, up to 50 MHz processing, and 256 KB of flash in a 64-LQFP package. It is well suited to industrial control, smart metering, sensor hubs, building automation, and compact embedded systems that benefit from a modern 32-bit software model without a higher-performance Cortex-M3, M4, or M7 core. LPC11U68JBD64 is the closest listed family member when its complete ordering suffix and procurement configuration meet the design requirements. Do not select another manufacturer’s MCU solely by matching package count or clock speed; migration can require changes to firmware startup code, peripheral libraries, memory maps, interrupt vectors, clocks, and pin multiplexing. For new designs, verify operating voltage, RAM, timer, serial-interface, analog, watchdog, and debug requirements against the manufacturer datasheet before schematic and PCB release.

השוואה עם חלופות

פרמטר מוצר זה LPC11U68JBD64
Manufacturer NXP Semiconductors NXP Semiconductors
CPU Core Arm Cortex-M0+ Arm Cortex-M0+/M0 family
Maximum CPU Frequency 50 MHz Up to 50 MHz
Architecture 32-bit RISC 32-bit microcontroller
Lifecycle Status Active Active

מבדילים עיקריים

  • Higher-performance upgrade path from simple 8-bit controllers (לעומתMC74F243M)
  • Larger program-memory capacity for embedded control firmware (לעומתAT90CAN64-16MUR)
  • Compact 64-LQFP integration with a broad pin count (לעומתATXMEGA128B1-CU)

הערות תכנון

Use the NXP package drawing and land pattern for the 64-LQFP, 10 mm × 10 mm package. Preserve clearance around fine-pitch leads and avoid placing tall components where they can interfere with tooling or inspection. Confirm pin-1 orientation in the PCB footprint and assembly documentation, since incorrect orientation can prevent programming or cause power rails to be shorted during assembly.

Place all required decoupling capacitors immediately adjacent to the corresponding supply and ground pins, and follow the capacitor values and layout specified in the manufacturer datasheet. Keep high-current return paths compact so switching and control-loop currents do not share narrow copper traces with sensitive signal returns. Verify minimum and maximum operating voltages, regulator sequencing, and power-consumption requirements against the complete electrical specifications.

Separate analog sensor inputs, oscillator connections, and programming signals from fast digital switching traces where the board layout permits. Use short return paths, maintain consistent impedance where communication lines require it, and place sensitive passive components close to their associated pins. Review the pin multiplexing and recommended analog configuration because an alternate-function or GPIO misassignment can degrade measurement or communication reliability.

Do not substitute a microcontroller solely because the package and CPU frequency look similar. Firmware migration also depends on memory-map compatibility, peripheral availability, interrupt assignments, clock architecture, and the exact package pinout. For LPC11U68JBD64 versus LPC11U68JBD64E, verify the complete ordering code and any suffix-specific differences before releasing a production build.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The product information identifies the device as an industrial-temperature-grade microcontroller but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.

הנתונים אומתו בתאריך: 2026-11-10 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

LPC11U68JBD64E datasheet LPC11U68JBD64E pinout LPC11U68JBD64E datasheet pdf LPC11U68JBD64E specifications LPC11U68JBD64E equivalent LPC11U68JBD64E replacement LPC11U68JBD64E price LPC11U68JBD64E stock NXP LPC11U68JBD64E LPC11U68JBD64E 64-LQFP LPC11U68JBD64E industrial control LPC11U68JBD64E vs LPC11U68JBD64 LPC11U68JBD64E application circuit LPC11U68JBD64E 50MHz Cortex-M0+

רכיבים ומונחים קשורים

NXP Semiconductors LPC11U68JBD64E LPC11U68JBD64 Arm Cortex-M0+ Arm Cortex-M0 32-bit RISC microcontroller MCU embedded microcontroller semiconductor LPC11Uxx family 256 KB flash memory 50 MHz 64-LQFP LFQFP 10 mm x 10 mm package surface mount gull wing industrial control IoT devices embedded automation motor control smart metering industrial temperature grade
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר