LPC11U68JBD64E - 50MHz Cortex-M0+ 256KB MCU | NXP
MPN: LPC11U68JBD64E ✓ NakahandaLPC11U68JBD64E Ulas
A microcontroller is a programmable semiconductor that integrates a CPU, nonvolatile program memory, data memory, peripherals, and communication interfaces on one integrated circuit. The Arm Cortex-M0+ core uses a compact instruction architecture intended to deliver efficient 32-bit processing with lower code-size requirements than many more complex processor architectures. Within the product hierarchy, the LPC11U68JBD64E is an MCU, a microcontroller, and an embedded semiconductor designed for control-oriented embedded systems.
The LPC11Uxx family supports CPU frequencies up to 50 MHz and includes flexible, configurable peripherals intended to replace combinations of 8-bit and 16-bit devices. Its 256 KB flash capacity provides room for substantially larger firmware than basic entry-level controllers, while the 64-LQFP package provides 64 accessible peripheral and power pins. The family is also identified by NXP as an Arm Cortex-M0+/M0-based scalable entry-level MCU family.
The LPC11U68JBD64E is particularly relevant to designs that need more capability than a simple 8-bit controller but do not require a high-performance Cortex-M3, Cortex-M4, or Cortex-M7 processor. Its combination of 50 MHz operation, 256 KB flash, and 64-LQFP packaging supports compact control boards with mixed analog and digital peripherals. The exact peripheral mix, RAM capacity, voltage limits, and pin functions must be confirmed against the manufacturer datasheet before circuit design.
Typical uses include industrial control modules, smart meters, sensor-hub boards, compact motor controllers, building automation equipment, and connected IoT products. In these systems, the MCU can coordinate sensors, apply control logic, supervise actuators, and manage serial communications. Firmware portability can also benefit engineers moving from simpler 8-bit architectures because the Cortex-M0+ platform provides a 32-bit ecosystem while retaining a comparatively simple programming model.
PCB planning should account for the exposed dimensions, lead pitch, and pin assignments of the 64-LQFP footprint. Place decoupling capacitors close to supply pins, route sensitive analog signals away from fast digital edges, and confirm every unused pin according to the datasheet. Programming and firmware configuration details should likewise be checked in the NXP product documentation.
This product page consolidates the verified manufacturer identity, core frequency, flash capacity, package details, lifecycle information, source links, and application-focused engineering guidance. It also distinguishes exact drop-in alternatives from options that require different packages or firmware qualification, helping designers make a PCB-compatible sourcing decision without overlooking firmware or peripheral differences.
Mga alternatibo na pwedeng ilagay na LPC11U68JBD64E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok LPC11U68JBD64E (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Maximum CPU Frequency, Flash Memory, Architecture.
LPC11U68JBD64K
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →LPC11U68JBD64E Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit microcontroller (MCU) |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 50 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 256 KB |
| Flash Organization | 256K x 8 |
| Packhaging | 64-LQFP, 10 mm x 10 mm |
| Terminal Count | 64 terminals |
| Uri ng Pagpapasok | Surface mount |
| Terminal Form | Gull wing |
| Package Code | LFQFP |
| Package Shape | Square |
| Temperature Grade | Industrial |
| Product Family | LPC11Uxx scalable entry-level MCU family |
| Instruction Set | Arm Cortex-M0+/M0 architecture |
| Application Targets | Industrial control, IoT devices, embedded automation, motor control, and metering |
| Katayuan ng Lifecycle | Active |
Gabay sa Pin Configuration ng LPC11U68JBD64E square
Pin configuration para sa LPC11U68JBD64E (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa LPC11U68JBD64E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
LPC11U68JBD64E ay nararapat para sa 6 aplikasyons: Industrial Control Modules, IoT Sensor Hubs, Smart Metering, Compact Motor Controllers, Building Automation Equipment, Embedded Data Acquisition.
Industrial Control Modules
The LPC11U68JBD64E fits compact industrial-control modules that combine sensor acquisition, digital logic, actuator supervision, and status communications. Its Arm Cortex-M0+ core can operate up to 50 MHz, while 256 KB of flash leaves useful room for control software, diagnostics, parameter tables, and communication routines. The 64-LQFP package offers 64 terminals for mixed power, digital, analog, and serial functions. Engineers should verify the required peripheral mix, voltage range, and industrial temperature details in the manufacturer datasheet before schematic freeze.
Inirekomenda
IoT Sensor Hubs
The LPC11U68JBD64E is suitable for IoT sensor hubs that aggregate readings from multiple sensors and perform local filtering or threshold decisions before network transmission. A 50 MHz Cortex-M0+ processor provides useful control headroom without moving into a higher-complexity processor class, and the 256 KB flash capacity supports application firmware and communication configuration. The 64-LQFP footprint simplifies access to external sensing, debug, and serial interfaces. Confirm the exact UART, SPI, I2C, and timer resources required by the selected board configuration.
Inirekomenda
Smart Metering
For smart-metering designs, the LPC11U68JBD64E can manage measurement sequencing, data conditioning, calibration constants, and low-bandwidth communications. Its 256 KB flash accommodates more application code and configuration data than basic 8-bit controllers, while the 32-bit Cortex-M0+ architecture simplifies handling of protocols and arithmetic-heavy routines. The 64-LQFP package provides a broad I/O selection for sensor inputs, display interfaces, and communications. Validate metering-specific timing, accuracy, low-power behavior, and peripheral assignments against the NXP datasheet.
Inirekomenda
Compact Motor Controllers
The LPC11U68JBD64E can serve as the supervisory controller in compact motor-control systems, executing control logic, monitoring position or speed inputs, sequencing outputs, and handling fault conditions. Its 50 MHz Cortex-M0+ performance supports responsive firmware while maintaining a relatively simple embedded architecture, and the 256 KB flash provides space for algorithms and diagnostics. The 64-LQFP package exposes enough pins for control signals and communications. Check timer features, PWM resources, analog channels, and external power-device requirements before assigning the MCU.
Inirekomenda
Building Automation Equipment
The LPC11U68JBD64E fits building-automation nodes that coordinate environmental sensors, remote inputs, actuators, and communication links. Its 32-bit Cortex-M0+ core runs up to 50 MHz for protocol processing and control tasks, while 256 KB of flash supports networking, diagnostics, and configuration firmware. The 64-LQFP package is practical for equipment boards requiring numerous external connections and inspectable surface-mount assembly. Validate standby-power requirements, communications peripherals, watchdog behavior, and environmental ratings against the complete manufacturer documentation.
Inirekomenda
Embedded Data Acquisition
The LPC11U68JBD64E can coordinate embedded data-acquisition systems that sample multiple inputs, perform digital filtering, maintain operating state, and forward results. The 50 MHz Cortex-M0+ processor offers more arithmetic headroom than a basic 8-bit MCU, and the 256 KB flash can retain firmware for acquisition, buffering, and communication. Its 64-LQFP package provides extensive pin access for sensors and control signals. Engineers should confirm the required ADC or timer resources, input limits, sampling synchronization, and data-retention options in the datasheet.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for LPC11U68JBD64E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | LPC11U68JBD64 |
|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors |
| CPU Core | Arm Cortex-M0+ | Arm Cortex-M0+/M0 family |
| Maximum CPU Frequency | 50 MHz | Up to 50 MHz |
| Architecture | 32-bit RISC | 32-bit microcontroller |
| Lifecycle Status | Active | Active |
Pangunahing mga Pagkakaiba
- Higher-performance upgrade path from simple 8-bit controllers (kumpara saMC74F243M)
- Larger program-memory capacity for embedded control firmware (kumpara saAT90CAN64-16MUR)
- Compact 64-LQFP integration with a broad pin count (kumpara saATXMEGA128B1-CU)
Talaan ng Disenyo
Use the NXP package drawing and land pattern for the 64-LQFP, 10 mm × 10 mm package. Preserve clearance around fine-pitch leads and avoid placing tall components where they can interfere with tooling or inspection. Confirm pin-1 orientation in the PCB footprint and assembly documentation, since incorrect orientation can prevent programming or cause power rails to be shorted during assembly.
Place all required decoupling capacitors immediately adjacent to the corresponding supply and ground pins, and follow the capacitor values and layout specified in the manufacturer datasheet. Keep high-current return paths compact so switching and control-loop currents do not share narrow copper traces with sensitive signal returns. Verify minimum and maximum operating voltages, regulator sequencing, and power-consumption requirements against the complete electrical specifications.
Separate analog sensor inputs, oscillator connections, and programming signals from fast digital switching traces where the board layout permits. Use short return paths, maintain consistent impedance where communication lines require it, and place sensitive passive components close to their associated pins. Review the pin multiplexing and recommended analog configuration because an alternate-function or GPIO misassignment can degrade measurement or communication reliability.
Do not substitute a microcontroller solely because the package and CPU frequency look similar. Firmware migration also depends on memory-map compatibility, peripheral availability, interrupt assignments, clock architecture, and the exact package pinout. For LPC11U68JBD64 versus LPC11U68JBD64E, verify the complete ordering code and any suffix-specific differences before releasing a production build.
Impormasyon ng Pagsunod sa Kautusan
The product information identifies the device as an industrial-temperature-grade microcontroller but does not provide explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements.