Analog Devices

LT1013CJ8 - Dual Precision Op Amp, CDIP | Analog Devices

N.º de pieza: LT1013CJ8 ✓ Activo
MOQ: 1 |

LT1013CJ8 Descripción general

The Analog Devices LT1013CJ8 is a dual precision operational amplifier in an 8-pin CERDIP package, with two independent amplifiers and operation from ±15 V or a single 5 V supply. It is specified for input voltages extending to ground on a single supply and for precision signal-conditioning applications where low offset, low bias current, and stable operation across temperature are important.

An operational amplifier, or op amp, is a high-gain differential amplifier that uses negative feedback to create a stable closed-loop gain. The LT1013 belongs to the precision amplifier hierarchy: operational amplifier, analog amplifier, and then integrated circuit. Its industry-standard 8-pin configuration supports conventional dual-amplifier layouts without requiring a specialized footprint.

The LT1013 provides two precision amplifiers in one package. Key operating characteristics include support for ±15 V supplies, single 5 V operation, and a total supply range extending to ±22 V, corresponding to 44 V across the supply terminals. The device is specified for instrumentation, strain-gauge conditioning, thermocouple amplification, 4 mA-to-20 mA current-loop transmitters, active filters, threshold detection, and precision gain blocks.

Its precision architecture is intended to reduce offset-related error in slow analog signals. This makes the amplifier useful where input-source impedance, sensor leakage, or thermal drift can otherwise create measurement errors. The single-supply ability to include ground in the input range is especially useful for battery-powered systems and sensors whose output can approach the lower rail.

Typical applications include low-level sensor amplification, process-control instrumentation, current-loop receivers, precision filters, and multiple gain stages requiring two matched amplifier channels. The dual configuration reduces package count in multi-channel analog front ends while retaining independent inputs, outputs, and supply pins.

For reliable operation, verify the input and output common-mode range at the selected supply voltage and load. Decoupling capacitors should be placed close to the supply pins, and sensitive bias-current measurements require guarded PCB traces, clean connectors, and leakage control around the input terminals.

This page combines the LT1013CJ8 device identity, package information, manufacturer application coverage, verified source links, drop-in-family alternatives, and practical selection guidance for precision analog design work.

Alternativas directas para LT1013CJ8 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con LT1013CJ8 (mismo factor de forma y huella).

LT1013AJ8

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin CERDIP
Same dual precision LT1013 architecture and 8-pin CERDIP footprint; temperature grade differs by approximately 55 C compared with the 0 C to 70 C LT1013CJ8 grade

📋 Alternativa de referencia (no en el catálogo)

LT1013ACJ8

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin CERDIP
Same dual precision LT1013 architecture, pin arrangement, and 8-pin CERDIP footprint; automotive temperature qualification differs by approximately 40 C compared with the 0 C to 70 C LT1013CJ8 grade

📋 Alternativa de referencia (no en el catálogo)

LT1013CJ8 Valores máximos y características eléctricas

No hay especificaciones disponibles

Configuración de pines de LT1013CJ8

Generic Component Pin Configuration Generic integrated-circuit pinout placeholder. Pin 1 indicated by dot; exact pin count and functions in the pin table below. 1 N 2 N-1 3 N-2 4 N-3 Pin Configuration See pin table below for pin functions Package-specific diagram not available
Pin 1 OFFSET NULL A — Amplifier A offset null
Pin 2 INVERTING INPUT A — Inverting input for amplifier A
Pin 3 NONINVERTING INPUT A — Noninverting input for amplifier A
Pin 4 V- — Negative supply connection
Pin 5 NONINVERTING INPUT B — Noninverting input for amplifier B
Pin 6 INVERTING INPUT B — Inverting input for amplifier B
Pin 7 OUTPUT B — Output for amplifier B
Pin 8 OUTPUT A — Output for amplifier A

Aplicaciones típicas

LT1013CJ8 es adecuado para 6 aplicacións: Strain-Gauge Signal Conditioning, Thermocouple Instrumentation, 4 mA to 20 mA Current Loop, Precision Active Filters, Battery-Powered Instrumentation, Precision Gain and Threshold Detection.

🏭

Strain-Gauge Signal Conditioning

The LT1013CJ8 is suitable for conditioning the small differential voltage generated by a strain-gauge bridge in industrial weighing, force measurement, and pressure equipment. Its dual precision topology allows one amplifier to amplify the bridge signal while the second handles gain, filtering, or excitation-related buffering within the same 8-pin CERDIP package. Operation from ±15 V supports legacy industrial analog circuits with substantial headroom. The single-supply input range extending to ground is also useful when redesigning the front end for lower-voltage operation. Bridge excitation, common-mode voltage, and output range must be checked together so that neither input nor output exceeds the amplifier's allowable operating region.

🏭

Thermocouple Instrumentation

The LT1013CJ8 can serve in low-level thermocouple measurement circuits where microvolt-to-millivolt signals require stable gain and low offset. The two amplifier channels can implement a difference stage or provide amplification and filtering for a differential sensor interface. The device's support for ±15 V permits direct use in classic industrial instrumentation without a lower-voltage translation stage. When designing the circuit, evaluate input bias-current error, source impedance, input common-mode range, and thermal gradients across the PCB because these effects can dominate a thermocouple's small output. Stable grounding and guard techniques are especially important when the source impedance is high.

⚡

4 mA to 20 mA Current Loop

The LT1013CJ8 is appropriate for precision current-loop receiver and transmitter interfaces used in process-control systems. Its two independent amplifiers can support gain and filtering functions in a compact analog channel, while operation from ±15 V or a single 5 V supply allows compatibility with both traditional plant equipment and modern embedded instrumentation. A current-loop implementation must preserve the loop's compliance voltage and account for the amplifier's input and output ranges when setting the gain. Low-offset behavior is valuable in a receiver because it shifts the measured current directly into the reconstructed process variable. Power-supply bypassing and grounded reference returns remain essential for stable loop accuracy.

🔧

Precision Active Filters

The LT1013CJ8 is suitable for active-filter stages that require predictable gain and low offset in instrumentation and test circuits. Two amplifiers in one 8-pin CERDIP package allow a second-order filter and an additional gain or buffer stage without using two separate packages. The LT1013's specified single 5 V operation is useful for compact low-voltage systems, while its ground-referenced input capability simplifies circuits that process signals near 0 V. Stable filter performance depends on resistor and capacitor tolerances, output loading, and the amplifier's small-signal behavior across the intended frequency range. Confirm bandwidth, slew rate, and output-current requirements from the manufacturer data sheet before selecting the final external components.

🔋

Battery-Powered Instrumentation

The LT1013CJ8 can be used in battery-powered precision measurement equipment where low-level signals must be amplified close to the lower supply rail. The manufacturer specifies single 5 V operation and notes that the single-supply input range extends to ground, making the device useful for portable sensor interfaces with a near-zero common-mode voltage. The two amplifier channels can reduce component count by combining amplification and buffering or by implementing two related measurement channels. Because operation near the supply rails can narrow usable input and output ranges, evaluate the sensor's full output span at startup, discharge, and temperature extremes. Low-power designs should also account for quiescent current and external filter-component leakage.

📡

Precision Gain and Threshold Detection

The LT1013CJ8 fits precision gain blocks and threshold-detection circuits where predictable signal levels are required. One channel can amplify or buffer a sensor output, while the second performs a second gain stage or comparison function around a reference voltage. The ceramic-DIP package is suitable for through-hole industrial, laboratory, and legacy control boards where long-term availability and conventional assembly are priorities. Design the signal path so the amplifier never approaches its output limits during threshold transitions, and use stable reference components to prevent detection-point drift. Decoupling, input guarding, and clean power grounding are especially important when the detected signal has a low amplitude or high source impedance.

Resumen de productos recomendados

LT1013CJ8 Analog Devices Se usa en: Strain-Gauge Signal Conditioning, Thermocouple Instrumentation, 4 mA to 20 mA Current Loop, Precision Active Filters, Battery-Powered Instrumentation, Precision Gain and Threshold Detection LT1014AMJ8 Quad precision amplifier option for multi-stage signal conditioning Se usa en: Strain-Gauge Signal Conditioning, Thermocouple Instrumentation, 4 mA to 20 mA Current Loop, Precision Active Filters, Battery-Powered Instrumentation, Precision Gain and Threshold Detection
What is the LT1013CJ8?
The LT1013CJ8 is a dual precision operational amplifier with two independent amplifiers in an 8-pin CERDIP package. According to the Analog Devices LT1013 product information, it is specified with ±15 V and single 5 V supplies and is intended for precision instrumentation, sensor conditioning, active filters, current-loop transmitters, threshold detection, and multiple gain blocks.
What is the supply voltage range of the LT1013CJ8?
The LT1013CJ8 operates from a single 5 V supply or from ±15 V supplies, with a maximum total supply rating of 44 V, equivalent to ±22 V. The Analog Devices product information explicitly lists ±15 V and single 5 V supply specifications, while distributor product records identify the maximum supply rating as 44 V.
Where can I download the LT1013CJ8 datasheet PDF?
The official LT1013 product and data-sheet entry is available on the Analog Devices website at https://www.analog.com/en/products/lt1013.html. The LT1013CJ8 is the ceramic-DIP order code within the LT1013 family, so use the device data sheet on that page to confirm the pin configuration, electrical limits, package drawing, and ordering information before finalizing a PCB.
Where is the LT1013CJ8 pinout located?
The LT1013CJ8 pinout is shown in the LT1013 manufacturer data sheet linked from the Analog Devices LT1013 product page. The 8-pin CERDIP configuration uses the standard dual-op-amp arrangement: offset null pins, two noninverting inputs, two inverting inputs, two outputs, and positive and negative supply connections.
Can the LT1013CJ8 operate from a single 5 V supply?
Yes, the LT1013CJ8 is specified for single 5 V operation, and its single-supply input range extends to ground. This is useful for battery-powered precision instrumentation and sensor interfaces where the signal can operate near the lower supply rail, although the allowable input and output common-mode range must still be checked for each supply voltage.
Is the LT1013CJ8 suitable for strain-gauge and thermocouple amplifiers?
Yes, the Analog Devices product information identifies strain-gauge signal conditioners and thermocouple amplifiers among the LT1013's principal applications. The LT1013CJ8 is appropriate when a low-level sensor signal requires stable amplification, while input bias current, offset voltage, noise, and common-mode-range checks determine the final circuit performance.
LT1013CJ8 vs LT1014AMJ8: which precision amplifier fits the design?
Choose the LT1013CJ8 for a dual-amplifier circuit and the LT1014AMJ8 when four amplifiers are required. The LT1013CJ8 contains two precision operational amplifiers in an 8-pin CERDIP package, while the LT1014 is the quad counterpart; the available package and temperature-grade details should be confirmed before either part is treated as a drop-in substitute.
When should I choose the LT1013CJ8 over another dual precision op amp?
Choose the LT1013CJ8 when the design benefits from a dual precision amplifier in an 8-pin CERDIP package, particularly for low-level instrumentation, strain gauges, thermocouples, or current-loop signals. Select another dual amplifier instead when its input bias current, noise, bandwidth, common-mode range, supply current, or automotive qualification better matches the application.
What is the best drop-in replacement for the LT1013CJ8?
The closest drop-in-family choices are the LT1013AJ8 and LT1013ACJ8 because they retain the LT1013 dual precision amplifier design in an 8-pin CERDIP footprint. Verify the temperature grade, screening requirements, supply ratings, and exact pin assignments for the production configuration. Parts with different packages are not direct drop-in replacements.
What can replace an LT1013CJ8 without changing the PCB?
A replacement must use the same 8-pin CERDIP footprint and preserve the complete pin arrangement, including offset-null and supply connections. LT1013-family ceramic-DIP variants are the closest candidates, but the manufacturer pin table must be checked for each exact MPN. SOIC, plastic-DIP, and leadless variants require different board land patterns.
Is an Analog Devices LT1013 equivalent preferable to the LT1013CJ8?
An equivalent LT1013-family amplifier may be preferable when a different temperature grade or availability is required, provided it retains the same 8-pin CERDIP footprint and electrical ratings. The LT1013CJ8 remains the reference choice when its specified commercial temperature grade and ceramic-DIP construction satisfy the product requirements.
Where can I buy the LT1013CJ8 and request current pricing?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for the exact LT1013CJ8 order code. The listing should specify the 8-pin CERDIP package and the required commercial temperature grade so that production material is not confused with another LT1013 package option.
What is the current lead time for the LT1013CJ8?
The current lead time should be requested through the Request a Quote form on this page using the exact MPN LT1013CJ8. Lead time can vary with order quantity, package configuration, quality screening, and manufacturing status, so confirm the complete production order code before approving a schedule.
Is the LT1013CJ8 in stock?
Current inventory should be confirmed through the Request a Quote form on this page by entering LT1013CJ8. Because inventory and allocation can change quickly, request the quantity, delivery location, date code requirement, and approved manufacturer packaging with the quotation.
What are the key specifications of LT1013CJ8 that engineers should know?
The LT1013CJ8 is a dual precision operational amplifier in an 8-pin CERDIP package. The Analog Devices product information identifies ±15 V and single 5 V operation, an input range extending to ground on a single supply, and support for maximum total supply voltages of 44 V. Applications include instrumentation, strain gauges, thermocouples, active filters, and 4 mA-to-20 mA current-loop transmitters.

Datos de referencia de ingeniería para LT1013CJ8 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the LT1013CJ8 for dual precision signal conditioning in a through-hole, 8-pin CERDIP design operating within a 0 C to 70 C temperature range. Its dual configuration, ±15 V or single 5 V operation, and ground-reaching single-supply input range suit strain gauges, thermocouples, current loops, filters, and gain blocks. Select the LT1013AJ8 when the same ceramic-DIP pinout is needed in a wider temperature range extending to approximately -55 C. Select the LT1013ACJ8 for an approximately -40 C to 125 C grade. Neither grade change should be made without reviewing the exact data-sheet limits and quality requirements. Use the LT1014AMJ8 instead when four precision amplifier channels are required, not as a pin-compatible substitute. SOIC, plastic-DIP, and leadless LT1013 options require different PCB footprints and are therefore not drop-in choices for an existing CERDIP design.

Comparación con alternativas

Parámetro Este producto LT1013AJ8 LT1013ACJ8
Brand Analog Devices Analog Devices Analog Devices
Package 8-pin CERDIP 8-pin CERDIP 8-pin CERDIP
Amplifier Count 2 2 2
Product Type Dual precision operational amplifier Dual precision operational amplifier Dual precision operational amplifier
Temperature Grade 0 C to 70 C -55 C to 125 C -40 C to 125 C
Primary Applications Instrumentation, strain gauges, thermocouples, current loops, filters, and gain blocks Precision instrumentation and signal conditioning Precision instrumentation and automotive-grade signal conditioning

Diferenciadores clave

  • Two precision amplifiers in one ceramic-DIP package (frente a LT1014AMJ8)
  • Commercial temperature grade (frente a LT1013AJ8)
  • Automotive temperature-range alternative (frente a LT1013ACJ8)

Notas de diseño

Place the supply-decoupling capacitor immediately between the V+ and V- pins, with a short return path to the ground plane. Keep input traces short and away from the offset-null and supply pins. For high-impedance sensor inputs, use guarding and minimize leakage from PCB contamination and connectors; otherwise bias-current error can obscure the intended precision measurement.

Verify the common-mode input range and output swing at the exact supply voltage, load current, and temperature. The single-supply input range extending to ground does not mean that the amplifier can swing rail-to-rail at the output. Include startup, sensor-offset, and supply-tolerance margins so that the output never approaches its functional boundary.

For precision gain stages, calculate the maximum total gain from the amplifier's small-signal bandwidth and verify that the intended signal and any switching components remain within that limit. Stable operation also depends on correct feedback topology and suitable compensation values. Use the manufacturer data sheet's gain-bandwidth and stability guidance when selecting feedback components.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The LT1013CJ8 is not documented as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status are unknown.

Búsquedas relacionadas

LT1013CJ8 datasheet LT1013CJ8 pinout LT1013CJ8 datasheet pdf LT1013CJ8 equivalent LT1013CJ8 replacement LT1013CJ8 cross reference LT1013CJ8 vs LT1014AMJ8 LT1013CJ8 price LT1013CJ8 stock Analog Devices LT1013CJ8 LT1013CJ8 8 pin CERDIP LT1013CJ8 application circuit

Componentes & términos relacionados

Analog Devices LT1013CJ8 LT1013 LT1013AJ8 LT1013ACJ8 LT1014AMJ8 dual operational amplifier precision operational amplifier analog amplifier integrated circuit semiconductor single-supply operation dual-supply operation common-mode voltage input bias current offset voltage gain-bandwidth product 8-pin CERDIP through-hole package strain-gauge signal conditioner thermocouple amplifier 4 mA to 20 mA current loop active filter precision instrumentation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ