Analog Devices

LT1464CS8 - Dual 1MHz Micropower JFET Op Amp | ADI

N.º de pieza: LT1464CS8 ✓ Activo
200 µA per amplifier Vdss 500 fA Id 8-pin SOIC, 0.154 inch (3.90 mm) width Package
MOQ: 1 |

LT1464CS8 Descripción general

Analog Devices LT1464CS8 is a dual, micropower JFET-input operational amplifier featuring 1 MHz gain-bandwidth product, 500 fA typical input bias current, and a maximum supply current of 200 µA per amplifier. The device is packaged in an 8-pin SOIC package. It combines picoampere-level bias current with operation from a single 5 V supply or a split supply, making it suitable for precision, low-power signal-chain designs.

An operational amplifier is a voltage-feedback amplifier used to amplify differential signals, buffer sensors, implement active filters, and serve as the gain element in control or instrumentation circuits. The LT1464 belongs to the JFET-input operational amplifier family and the broader voltage-feedback amplifier category. Its low-bias-current input stage is especially useful when the source impedance is high or leakage currents would otherwise disturb the measurement.

Key operating characteristics include a 1 MHz gain-bandwidth product, 0.9 V/µs slew rate, 500 fA typical input bias current, and no more than 200 µA supply current per amplifier. According to the Analog Devices LT1464 product information, the amplifiers are unity-gain stable with capacitive loads up to 10 nF. Their outputs can drive a 10 kΩ load to within 1.5 V of either supply rail, supporting practical single-supply signal-conditioning circuits.

The JFET input architecture combines low input bias current with the amplifier’s micropower operating current. Gain-bandwidth behavior supports approximately 1 MHz closed-loop bandwidth at unity gain, while the specified output-current capability allows the device to follow higher-frequency signals without requiring a high-power output stage. Designers should still evaluate output swing, load current, and supply voltage together because the usable output range narrows near the rails.

Typical applications include low-frequency sensor signal conditioning, current-to-voltage conversion, photodiode and other high-impedance transducers, precision filtering, battery-powered instrumentation, and general dual-amplifier signal chains. The 8-pin SOIC package provides two amplifiers and can simplify PCB layout when both channels are required in adjacent analog sections.

A critical design consideration is stability with capacitive loading. The manufacturer specifies unity-gain stability for loads up to 10 nF, so longer sensor cables or unusual load networks may require isolation resistance close to the input. Grounding and bypassing should follow the manufacturer’s recommended application circuit, with short return paths and local supply decoupling to preserve low-noise behavior.

This product information combines the manufacturer’s electrical characteristics with practical guidance on low-power operation, capacitive loading, output swing, and PCB implementation. It also organizes the verified ordering options and key limitations into a form that supports direct part selection, sourcing, and circuit design.

Alternativas directas para LT1464CS8 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

LT1464CS8#PBF

✅ Sustitución directa
📦 8-pin SOIC
Same LT1464 dual JFET-input amplifier and 8-pin SOIC package; electrical performance difference is 0%, while the ordering code changes the marked part configuration.

📋 Alternativa de referencia (no en el catálogo)

LT1464CS8 Valores máximos y características eléctricas

Amplifier Type JFET-input operational amplifier
Number of Circuits 2 circuits
Gain-Bandwidth Product 1 MHz
Slew Rate 0.9 V/µs
Maximum Supply Current 200 µA per amplifier
Typical Input Bias Current 500 fA
Capacitive Load Stability 10 nF at unity gain
Output Swing Within 1.5 V of either supply with a 10 kΩ load
Encapsulado 8-pin SOIC, 0.154 inch (3.90 mm) width
Tipo de montaje Surface mount
Input Bias Current Picoampere class

Guía de configuración de pines de LT1464CS8 8-pin soic, 0.154 inch (3.90 mm) width

Configuración de pines para LT1464CS8 (encapsulado 8-pin soic, 0.154 inch (3.90 mm) width). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin soic, 0.154 inch (3.90 mm) width para LT1464CS8

No hay datos detallados de patillaje disponibles para LT1464CS8.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

LT1464CS8 es adecuado para 6 aplicacións: High-Impedance Sensor Signal Conditioning, Battery-Powered Instrumentation, Precision Active Filtering, Photodiode and Transducer Amplification, Low-Power ADC Input Buffer, Industrial Control and Monitoring Loops.

🧩

High-Impedance Sensor Signal Conditioning

The LT1464CS8 fits high-impedance sensor front ends because its JFET input stage provides 500 fA typical input bias current while each amplifier consumes no more than 200 µA. Place one channel in a non-inverting or differential conditioning stage and use the other for gain, filtering, or level translation. The 1 MHz gain-bandwidth product supports low-frequency signal paths, while low input bias reduces disturbance of high-source-resistance sensors. Before release, check offset voltage, input capacitance, noise, and drift against the sensor error budget.

📱

Battery-Powered Instrumentation

The LT1464CS8 is suitable for portable instruments that must conserve power without abandoning JFET-input signal integrity. Its maximum supply current of 200 µA per amplifier limits the amplifier contribution to system consumption, and the 500 fA typical input bias current is valuable when measuring leakage-sensitive nodes. The dual configuration supports two analog channels in one 8-pin SOIC, helping conserve board area. Use local supply bypassing and a quiet reference or excitation source because the amplifier’s low power consumption does not eliminate errors caused by noisy external circuitry.

🎧

Precision Active Filtering

The LT1464CS8 can implement precision low-frequency active filters where low input bias current and micropower operation are both useful. Its 1 MHz gain-bandwidth product gives adequate bandwidth for many sensor, audio-band control, and instrumentation networks, while dual channels allow cascading active stages in one package. Use the appropriate noise-gain topology and stable resistor values to avoid unintended oscillation. Capacitive loading at the output must remain compatible with the manufacturer’s unity-gain stability rating of 10 nF, or be isolated as recommended in the datasheet.

📺

Photodiode and Transducer Amplification

The 500 fA typical input bias current of the LT1464CS8 makes it a logical fit for photodiode, capacitive transducer, and other leakage-sensitive amplification stages. The JFET input minimizes current drawn from the transducer, helping preserve small output signals before further filtering or conversion. Its 0.9 V/µs slew rate and 1 MHz gain-bandwidth product support practical low-to-moderate bandwidth signal chains. The designer must still account for photodiode capacitance, amplifier noise, offset voltage, and cable loading to determine the achievable signal-to-noise ratio.

🖥️

Low-Power ADC Input Buffer

LT1464CS8 can buffer a sensor or slow analog signal into an ADC input when low power and high input impedance are priorities. The 1 MHz gain-bandwidth product covers many low-bandwidth conversion systems, and the dual amplifier allows one channel for acquisition while the other provides gain or active filtering. Because the output can reach only within 1.5 V of either supply with a 10 kΩ load, set the signal and output ranges carefully. Confirm ADC settling requirements and account for capacitive input loading before using the full bandwidth.

🏭

Industrial Control and Monitoring Loops

The LT1464CS8 is applicable to low-frequency industrial monitoring loops where a dual, low-power amplifier can condition two related signals without adding substantial supply demand. Its 1 MHz bandwidth is appropriate for many slow control and sensor loops, and picoampere input bias supports higher-impedance sensing nodes. The 8-pin SOIC package simplifies assembly, but industrial temperature qualification, output swing, electromagnetic interference, and long-cable stability require separate evaluation. Use short traces and a clean ground reference to prevent external coupling from dominating the small-signal measurement.

What are the key specifications of LT1464CS8 that engineers should know?
The LT1464CS8 is a dual, 1 MHz micropower JFET-input operational amplifier with 500 fA typical input bias current and no more than 200 µA supply current per amplifier. It also provides 0.9 V/µs slew rate, unity-gain stability with capacitive loads up to 10 nF, and output swing to within 1.5 V of either supply when driving 10 kΩ. According to Analog Devices LT1464 product information, these characteristics make it suitable for high-impedance sensing and low-power instrumentation.
Where to download the LT1464CS8 datasheet PDF?
Download the LT1464 family documentation from the official Analog Devices LT1464 product page at https://www.analog.com/en/products/lt1464.html. The manufacturer page contains the family datasheet and product information covering the LT1464 dual and LT1465 quad micropower JFET-input operational amplifiers. Use the LT1464CS8 order information to identify the 8-pin SOIC configuration, and consult the pin-description table and recommended application circuits when assigning PCB connections.
Where can I find the LT1464CS8 pinout?
Use the LT1464 family datasheet and package drawing on the official Analog Devices product page to locate the LT1464CS8 pinout. The LT1464CS8 contains two amplifiers in an 8-pin SOIC package, but individual pin names are not reproduced here because the complete pin-description table is not included in the cited product excerpts. For layout, follow the numbered package drawing and the manufacturer’s standard dual operational amplifier connection for non-inverting and inverting inputs.
Where to buy LT1464CS8 online?
Use the Request a Quote form on this page to request LT1464CS8 pricing, stock confirmation, and current lead time. The exact MPN appears in manufacturer and distributor product records for the dual, 8-pin SOIC JFET-input operational amplifier. Because availability and commercial terms can change by region, quantity, and order code, request a quotation for the specific LT1464CS8 configuration rather than relying on a historical listing.
What is the price of LT1464CS8?
Current LT1464CS8 pricing is not stated as a static value on this page because prices vary with quantity and order code. Submit the Request a Quote form with the required quantity, package preference, and destination to receive a current quotation. The part is identified as an Analog Devices dual JFET-input operational amplifier in an 8-pin SOIC package, so include the complete LT1464CS8 MPN with your request.
What is the lead time for LT1464CS8?
Request the current LT1464CS8 lead time through the Request a Quote form on this page. Lead time depends on the manufacturer’s inventory position, requested quantity, package configuration, and delivery destination. Product listings confirm the LT1464CS8 ordering identity, but they do not establish a fixed production lead time, so a quotation is the appropriate way to obtain a current commitment.
Is LT1464CS8 in stock?
Current LT1464CS8 stock should be confirmed through the Request a Quote form on this page. Retail and distributor listings can change independently, and their appearance does not guarantee the quantity or exact orderable MPN currently available for a new production build. Specify the required quantity and whether the standard LT1464CS8 or an explicitly identified ordering code is required.
What can replace LT1464CS8?
The closest verified drop-in option identified for LT1464CS8 is LT1464CS8#PBF from Analog Devices, which is listed as the same dual, 8-pin SOIC JFET-input operational amplifier family. Its functional specifications and package match the target, making it suitable for direct substitution when its orderable lead-free configuration matches the procurement requirements. No other pin-compatible substitute with fully verified parameters was established, so PCB compatibility should not be inferred merely from similar amplifier specifications.
Can LT1464CS8#PBF replace LT1464CS8?
Yes, LT1464CS8#PBF is a same-family drop-in candidate for LT1464CS8 because both are identified as Analog Devices dual JFET-input operational amplifiers in 8-pin SOIC packages. The verified records describe the same LT1464 family and electrical feature set, including 1 MHz gain-bandwidth product, picoampere bias current, and micropower operation. Confirm procurement, temperature, grade, and marking requirements before production release.
What is the best Analog Devices equivalent for LT1464CS8?
LT1464CS8#PBF is the best verified Analog Devices equivalent for LT1464CS8 because it retains the same dual-amplifier architecture, 8-pin SOIC footprint, and LT1464 family characteristics. The LT1465 is a quad version and is not presented as a direct substitute because its package and channel count differ. For a true board-level replacement, retain the LT1464CS8#PBF as the first candidate and verify all temperature and ordering conditions before substitution.
LT1464CS8 vs LT1464CS8#PBF - which is better for a new design?
LT1464CS8 and LT1464CS8#PBF offer the same verified dual JFET-input operational amplifier architecture and 8-pin SOIC package. The practical distinction is the manufacturer ordering code, including the lead-free #PBF marking, rather than a change in the listed core performance of 1 MHz gain-bandwidth product, 0.9 V/µs slew rate, and 500 fA typical input bias current. Choose the orderable code that satisfies the product’s environmental and procurement requirements.
When should I choose LT1464CS8 over another micropower JFET amplifier?
Choose LT1464CS8 when the design needs two low-power, 1 MHz JFET-input amplifiers in an 8-pin SOIC package and can tolerate its specified output swing of within 1.5 V of either supply. Its 500 fA typical bias current is appropriate for high-impedance sensors, while its 200 µA maximum current per amplifier supports battery-powered systems. Select another candidate only after verifying channel count, package, supply range, offset, temperature range, and capacitive-load behavior.
Is LT1464CS8 suitable for high-impedance sensor measurement?
Yes, LT1464CS8 is suitable for many high-impedance sensor measurements because its JFET input stage provides 500 fA typical input bias current. This low leakage helps preserve signals from transducers with high source resistance while each amplifier consumes no more than 200 µA. Input offset voltage, input capacitance, noise, and temperature drift should still be checked against the sensor’s error budget before finalizing the measurement chain.
Can LT1464CS8 drive a capacitive load?
Yes. According to the Analog Devices LT1464 product information, LT1464-series amplifiers are unity-gain stable with capacitive loads up to 10 nF. For sensor cables, ADC inputs, or other networks that add capacitance beyond 10 nF, use the manufacturer’s recommended isolation technique because excessive capacitive loading can cause instability. The 10 nF limit should also be checked against supply voltage, frequency, and output-current conditions.
Does LT1464CS8 support single-supply operation?
The LT1464CS8 is designed for low-power dual-supply or single-supply operation, with the exact allowable supply range specified in the manufacturer datasheet. For a single-supply circuit, bias the signal near mid-supply to preserve symmetrical output swing. The published output specification allows the output to approach either supply within 1.5 V when driving 10 kΩ, so design the signal range around that restricted swing rather than assuming rail-to-rail output.

Datos de referencia de ingeniería para LT1464CS8 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose LT1464CS8 when the circuit needs two micropower JFET-input amplifiers, a 1 MHz gain-bandwidth product, and picoampere-class input bias current in an 8-pin SOIC package. It is particularly appropriate for high-impedance sensors, low-power instrumentation, active filters, and dual analog signal-conditioning stages. LT1464CS8#PBF is the closest verified drop-in candidate because it retains the same family architecture, electrical characteristics, and package; select that ordering code when its lead-free marking and commercial configuration satisfy the product requirements. Do not choose the LT1465 as a direct replacement because it is a quad amplifier rather than a dual device. Before finalizing a different candidate, require the same 8-pin footprint, dual-channel pinout, supply range, input bias class, output swing, offset-voltage limit, temperature grade, and capacitive-load behavior. Account for the output approaching only within 1.5 V of the supply rails and isolate loads exceeding the 10 nF unity-gain stability limit.

Comparación con alternativas

Parámetro Este producto LT1464CS8#PBF
Brand Analog Devices Analog Devices
Package 8-pin SOIC 8-pin SOIC - same package
Number of Amplifiers 2 circuits 2 circuits
Amplifier Input Type JFET JFET
Gain-Bandwidth Product 1 MHz 1 MHz
Slew Rate 0.9 V/µs 0.9 V/µs
Maximum Supply Current 200 µA per amplifier 200 µA per amplifier
Typical Input Bias Current 500 fA 500 fA
Unity-Gain Capacitive Load 10 nF 10 nF

Diferenciadores clave

  • Direct same-family ordering-code replacement (frente a LT1464CS8#PBF)
  • Very low bias current for precision leakage control (frente a LT1464CS8#PBF)
  • Micropower operation with two integrated channels (frente a LT1464CS8#PBF)

Notas de diseño

Do not treat the advertised 10 nF capacitive-load rating as unlimited stability. Long sensor leads, ADC sampling inputs, and probe capacitance can create resistive or reactive loading that changes the effective response. Keep the standard noninverting and inverting networks close to the device, compare the connected load against the 10 nF unity-gain specification, and use the manufacturer’s isolation method when greater capacitance is unavoidable.

Route each amplifier’s input and feedback paths away from supply, clock, and switching-node traces. Connect the two channels to their respective signal sources without sharing long high-impedance traces, because shared paths can couple leakage and noise into both channels. Place local supply bypassing close to the SOIC power pins and maintain a continuous ground reference beneath the device to reduce inductive voltage differences across the package.

Estimated: each amplifier’s maximum supply current is 200 µA, so the dual amplifier can account for up to 400 µA of supply current before external bias current is included. Calculate total power as Estimated: P = VIN × ISUPPLY, using the actual supply voltage and measured system current. The LT1464 remains micropower, but battery-life calculations must also include sensor, reference, and interface loads.

Account for output swing before choosing the circuit’s common-mode range. The published specification places the output within 1.5 V of either supply when driving 10 kΩ. Bias a single-supply design near mid-supply and avoid requiring linear operation close to either rail, where the amplifier’s output cannot follow the ideal input. For ADC interfaces, also verify that the selected reference and signal limits remain inside the amplifier’s linear operating region.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The #PBF ordering code identifies a lead-free-marked LT1464CS8 configuration, but the cited excerpts do not explicitly state the compliance status of the standard LT1464CS8 ordering code.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

LT1464CS8 datasheet LT1464CS8 pinout LT1464CS8 datasheet pdf LT1464CS8 equivalent LT1464CS8 replacement LT1464CS8 cross reference LT1464CS8 vs LT1464CS8#PBF LT1464CS8 price LT1464CS8 stock Analog Devices LT1464CS8 LT1464CS8 8-SOIC op amp LT1464CS8 micropower JFET op amp LT1464CS8 high impedance sensor LT1464CS8 capacitive load

Componentes & términos relacionados

Analog Devices LT1464CS8 LT1464CS8#PBF LT1464 LT1465 dual operational amplifier JFET-input operational amplifier voltage-feedback amplifier amplifier IC micropower amplifier picoampere input bias current gain-bandwidth product slew rate unity-gain stability capacitive load 8-pin SOIC SOIC package family surface-mount package high-impedance sensor active filter battery-powered instrumentation ADC input buffer output swing supply current single-supply operation
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ