Analog Devices

MAX232CWE-TG074 - 120kbps RS-232 Transceiver | Analog Devices

N.º de pieza: MAX232CWE-TG074 ✓ Activo
16-SOIC Package
MOQ: 1 |

MAX232CWE-TG074 Descripción general

The Analog Devices MAX232CWE-TG074 is a dual-driver, dual-receiver RS-232 line transceiver rated for data rates up to 120kbps and housed in a 16-pin SOIC package. It provides the electrical conversion between RS-232 logic-level signals and bipolar serial data, including the voltage translation required on both driver and receiver sides. The device is intended for EIA/TIA-232E and V.28/V.24 communications interfaces where ±12V supplies are unavailable.

A MAX232 is a bipolar RS-232 interface IC that converts TTL/CMOS-compatible logic signals into RS-232 levels and converts incoming RS-232 signals back into logic levels. Within the interface hierarchy, it belongs to the line-driver and receiver category, interface IC family, and broader semiconductor product group. Two driver channels and two receiver channels allow one device to support a full-duplex serial link.

The MAX232CWE-TG074 supports operation at up to 120kbps, making it suitable for common serial-console, industrial-control, point-of-sale, and embedded equipment links. Its integrated level translation reduces the need for external RS-232 driver and receiver components. The 16-SOIC package supports conventional surface-mount assembly and is suitable for compact industrial and commercial equipment designs.

The MAX220 through MAX249 family is designed around EIA/TIA-232E and V.28/V.24 interface requirements, particularly where positive and negative supply voltages of approximately ±12V are not available. The CWE-TG074 ordering form identifies this part as a 16-SOIC RS-232 driver/receiver interface with two drivers and two receivers. Its interface architecture supports simultaneous transmit and receive paths when the host and peripheral provide complementary data and control signals.

Typical applications include configuration-port and console interfaces in embedded systems, communication links between microcontrollers and industrial peripherals, RS-232 test equipment, and legacy peripheral connections requiring bidirectional data transfer. Designers should pay particular attention to cable length, signal integrity, grounding, and the distinction between logic-level and RS-232 voltage domains.

For a new layout, place the MAX232CWE-TG074 close to the connector and preserve short, direct routes for the driver outputs and receiver inputs. Check the device's receive thresholds and the logic-level supply requirements of the connected controller. Add the charge-pump capacitors recommended by the manufacturer at the designated pins and avoid long stubs that could increase ringing or susceptibility to ESD events.

This product page combines the available manufacturer-family information, package identification, interface characteristics, application guidance, and drop-in replacement options in a format designed for engineering selection. For complete channel assignments, absolute maximum ratings, electrical characteristics, and layout guidance, use the official MAX232CWE datasheet and the exact pin-description table before releasing a PCB or production design.

Alternativas directas para MAX232CWE-TG074 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX232CWE-TG074 (mismo factor de forma y huella) — difiere en Interface Standard, Package, Product Type.

Analog Devices
Interface Standard: EIA/TIA-232E, V.28, V.24
Package: 16-SOIC narrow
Product Type: Dual RS-232 Transceiver
Comparar con MAX232CWE-TG074 →
Analog Devices
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Package: 16-pin wide SOIC
Product Type: RS-232 line driver/receiver transceiver
Comparar con MAX232CWE-TG074 →

MAX232CWE+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Consulte el precio

Ver hoja de datos →

MAX232CWE+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-SOIC
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

Consulte el precio

Ver hoja de datos →

MAX232AWE+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 16-SOIC
Same 16-SOIC 2/2 RS-232 interface and approximately 120kbps class, with family-specific electrical and qualification differences

📋 Alternativa de referencia (no en el catálogo)

MAX232CSE+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-SOIC
Dual RS-232 Transceiver · EIA/TIA-232E, V.28, V.24 · 4.5 V to 5.5 V · 2 · 2 · 2/2 Full RS-232 · 16-SOIC narrow · 16 pins

Consulte el precio

Ver hoja de datos →

MAX232EWE+

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Analog Devices
📦 16-SOIC
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

Consulte el precio

Ver hoja de datos →

MAX232CWE-TG074 Especificaciones

Product Type RS-232 driver/receiver transceiver
Driver Channels 2
Receiver Channels 2
Maximum Data Rate 120kbps
Interface Standard EIA/TIA-232E and V.28/V.24
Encapsulado 16-SOIC
Tipo de montaje Surface mount
Número de pines 16 pins

Guía de configuración de pines de MAX232CWE-TG074 16-soic

Configuración de pines para MAX232CWE-TG074 (encapsulado 16-soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-soic para MAX232CWE-TG074

No hay datos detallados de patillaje disponibles para MAX232CWE-TG074.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX232CWE-TG074 es adecuado para 6 aplicacións: Embedded Serial Console, Industrial Control Equipment, Point-of-Sale Terminal Interface, Instrumentation and Test Equipment, Network Equipment Management Port, Printer and Legacy Peripheral Connection.

🔧

Embedded Serial Console

The MAX232CWE-TG074 fits embedded systems that expose a debug or configuration console through an RS-232 port. Its two-driver and two-receiver arrangement supports a full-duplex link, while the 120kbps maximum data rate is appropriate for command-line traffic, boot messages, and low-volume configuration transfers. Place the interface near the serial connector, route driver and receiver traces directly to protection circuitry, and follow the manufacturer charge-pump capacitor placement recommendations. The principal design consideration is maintaining clean logic-level timing while presenting compliant bipolar voltage levels at the connector.

🏭

Industrial Control Equipment

The MAX232CWE-TG074 can connect industrial-control equipment, test fixtures, and service ports that retain RS-232 interfaces. Two drivers and two receivers provide enough channels for a typical point-to-point full-duplex arrangement, and the 120kbps class accommodates many legacy supervisory protocols. The 16-SOIC package also simplifies panel-board and controller-board layouts. For industrial cable connections, verify the required operating-temperature grade and consider external surge or ESD protection because the connector environment may be harsher than the protected logic side of the circuit.

📱

Point-of-Sale Terminal Interface

The MAX232CWE-TG074 is suitable for point-of-sale terminals, peripherals, and service equipment using an RS-232 command channel. The two transmit and two receive channels support full-duplex communication, and 120kbps is sufficient for many transaction, status, and configuration protocols. Place the IC near the DB9 or equivalent connector to minimize trace exposure and include the required charge-pump capacitors close to their designated pins. Validate the host-side logic levels and connector wiring before production, since RS-232 is a bipolar voltage interface rather than a direct 5V UART connection.

🔬

Instrumentation and Test Equipment

The MAX232CWE-TG074 can serve as the RS-232 interface in laboratory instruments, automated test systems, and bench controls. A 120kbps channel is well suited to remote commands and measurement data exchanges that do not require continuous high-bandwidth transfers. Its dual-driver and dual-receiver arrangement allows one IC to handle both control output and status input. Keep the analog or sensitive measurement circuitry separate from connector-associated return currents, use a defined ground strategy, and verify the receiver's logic output levels against the controller used in the instrument.

🌐

Network Equipment Management Port

The MAX232CWE-TG074 is appropriate for legacy network switches, routers, and management accessories that provide a serial console through RS-232. The 120kbps rate and two-channel transceiver arrangement are sufficient for console login, configuration commands, and diagnostic output. Place the interface near the connector and route the receiver path away from switching-power and clock signals to reduce coupling. Verify the required temperature and qualification conditions against the equipment's environmental specification, and apply connector-side protection when the management port is accessible from an external cable.

🖨️

Printer and Legacy Peripheral Connection

The MAX232CWE-TG074 enables a modern controller or embedded board to communicate with printers, scanners, scales, and other legacy peripherals using RS-232. The 2/2 driver-receiver arrangement supports bidirectional command and status traffic, while the 120kbps rate suits many peripheral protocols. The device converts between the controller's logic-level UART and the bipolar signal expected by the RS-232 endpoint. Check connector pin numbering, signal direction, cable length, and logic thresholds before assembly, because these details determine whether the physical connection operates correctly despite using the same transceiver package.

Resumen de productos recomendados

MAX232CWE Same-family base RS-232 transceiver Se usa en: Embedded Serial Console, Point-of-Sale Terminal Interface, Network Equipment Management Port MAX232CWE+ Analog Devices Se usa en: Embedded Serial Console, Industrial Control Equipment, Instrumentation and Test Equipment MAX232AWE+ Same-package MAX232-family option Se usa en: Industrial Control Equipment, Network Equipment Management Port MAX232EWE+ Analog Devices Se usa en: Point-of-Sale Terminal Interface, Printer and Legacy Peripheral Connection MAX232CSE+ Analog Devices Se usa en: Instrumentation and Test Equipment, Printer and Legacy Peripheral Connection
What is the MAX232CWE-TG074 used for?
The MAX232CWE-TG074 is a dual-driver, dual-receiver IC used to connect TTL/CMOS-compatible logic circuitry to an RS-232 communications port. According to the MAX232CWE family datasheet, it is intended for EIA/TIA-232E and V.28/V.24 interfaces, with two transmit paths and two receive paths operating at up to 120kbps. It is especially useful where the system does not provide separate positive and negative RS-232 supply rails.
What is the data rate of MAX232CWE-TG074?
The MAX232CWE-TG074 supports a maximum data rate of 120kbps. This rate is identified in the MAX232CWE-TG074 product listing and applies to the RS-232 driver/receiver function. It is suitable for many console, configuration, and industrial-control links, although cable length and the connected peripheral can reduce the practical operating rate. Use the manufacturer datasheet to confirm timing and loading conditions for the selected channel configuration.
Where can I download the MAX232CWE datasheet PDF?
The MAX232CWE datasheet PDF is available through the MAX232CWE document page listed on this product page. The manufacturer-family document describes the MAX220-MAX249 line-driver and receiver family, including its use with EIA/TIA-232E and V.28/V.24 interfaces. Open the datasheet link and use the exact MAX232CWE document when checking pin assignments, electrical limits, charge-pump capacitor values, and recommended application circuits.
What is the MAX232CWE-TG074 pinout?
The MAX232CWE-TG074 uses a 16-SOIC package, and its complete pin assignments are defined in the pin-description table of the MAX232CWE datasheet. The device contains two drivers, two receivers, power pins, ground pins, and charge-pump capacitor connections. Use the manufacturer pin table for PCB routing and logic-level assignments because different MAX232-family ordering codes can use the same physical package without sharing identical operating specifications.
How many RS-232 channels does MAX232CWE-TG074 provide?
The MAX232CWE-TG074 provides two RS-232 driver channels and two receiver channels in one 16-SOIC package. The two-driver, two-receiver configuration is confirmed by the MAX232CWE-TG074 product listing. It can support a bidirectional communications arrangement when the connected host and peripheral allocate the driver and receiver signals appropriately. The exact TX, RX, ground, and enable connections should be taken from the manufacturer pin-description table.
Is MAX232CWE-TG074 compatible with a 5V microcontroller?
The MAX232CWE-TG074 is designed to interface RS-232 equipment with digital logic systems, but the controller supply level must match the IC's specified logic-side requirements. The MAX232 family datasheet describes the relationship between VCC, receiver outputs, and driver inputs. Verify the exact VCC range and input thresholds before connecting a 5V controller. Also observe the required input and output levels at the RS-232 connector rather than treating RS-232 levels as 5V logic.
Can MAX232CWE-TG074 replace a MAX232CWE+?
The MAX232CWE-TG074 and MAX232CWE+ use the same 16-SOIC footprint and implement the same dual-driver, dual-receiver RS-232 function. Their order codes and qualification details may differ, so the electrical limits, temperature range, marking, and assembly requirements should be compared before substitution. The MAX232CWE product listing identifies the CWE+ device as a 2/2 full-RS-232 transceiver in a 16-SOIC package, supporting board-level pin compatibility.
What is the best drop-in replacement for MAX232CWE-TG074?
The closest same-family drop-in choices are MAX232CWE, MAX232CWE+, MAX232AWE+, MAX232CSE+, and MAX232EWE+, subject to package-width, temperature, and qualification checks. Each uses a 16-pin SOIC format and provides two RS-232 drivers and two receivers, while the model letter changes specific family characteristics. No cross-brand replacement was explicitly documented in the available cross-reference results, so validate any second-source device against the complete electrical specification before production use.
Is MAX232CWE-TG074 the same as MAX232CWE?
The MAX232CWE-TG074 is an orderable form of the MAX232CWE 16-SOIC transceiver, but the full ordering suffix can identify specific processing, packaging, or qualification conditions. The functional core remains a two-driver, two-receiver RS-232 interface rated up to 120kbps. Before treating the parts as interchangeable, compare the manufacturer ordering information, temperature grade, device marking, operating lifetime, and any customer-specific assembly requirements.
When should I choose MAX232CWE-TG074 over another RS-232 transceiver?
Choose the MAX232CWE-TG074 when a design requires a 16-SOIC RS-232 interface with two driver channels, two receiver channels, and operation up to 120kbps. It is a sensible choice for compact embedded and industrial-control equipment using the MAX220-MAX249 family architecture. Select a different model if the design needs different supply levels, additional channels, automatic shutdown, enhanced ESD protection, narrower logic thresholds, or a different package and operating-temperature envelope.
Is MAX232CWE-TG074 suitable for an industrial control system?
The MAX232CWE-TG074 is suitable for many industrial-control and configuration ports that use RS-232 at rates up to 120kbps. Its two-driver and two-receiver arrangement supports point-to-point equipment interfaces, while the 16-SOIC package simplifies conventional surface-mount assembly. Industrial suitability still depends on the required temperature grade, isolation, surge protection, grounding, and regulatory requirements. Add external protection where the cable is exposed to severe industrial transients.
Where can I buy MAX232CWE-TG074 online?
Use the Request a Quote form on this page to request MAX232CWE-TG074 availability, lead time, and a current quotation. The available product listings confirm that the part is offered as a 16-SOIC RS-232 transceiver, but they do not provide a complete quantity-break price table for the exact MPN. XAIPART can therefore confirm commercial terms directly without presenting a stale or incomplete price schedule.
What is the price of MAX232CWE-TG074?
A current price for MAX232CWE-TG074 should be requested through the Request a Quote form on this page. The available product listings do not show an explicit quantity-break price table for the exact ordering code, so no numerical price is stated here. A quote can confirm the required quantity, shipment packaging, production quantity, current lead time, and any traceability requirements for the 16-SOIC device.
What is the lead time for MAX232CWE-TG074?
The current lead time for MAX232CWE-TG074 is not stated on the product page, so use the Request a Quote form to obtain a production schedule. Include your annual usage, forecast horizon, shipment quantity, and required delivery date in the request. This allows XAIPART to confirm the appropriate manufacturing and fulfillment plan for the exact 16-SOIC ordering code rather than relying on a generic inventory estimate.
Is MAX232CWE-TG074 in stock?
Use the Request a Quote form on this page to check the current availability of MAX232CWE-TG074. The available product pages identify the part and its 16-SOIC configuration, but they do not provide a confirmed quantity that can be represented as live stock on this page. A quote response can establish available quantity, lead time, and shipment packaging for your specific order.
What are the key specifications of MAX232CWE-TG074 that engineers should know?
The key MAX232CWE-TG074 specifications are two RS-232 drivers, two receivers, a maximum data rate of 120kbps, support for EIA/TIA-232E and V.28/V.24 interfaces, and a 16-SOIC package. These specifications place it in the RS-232 transceiver category and make it appropriate for point-to-point equipment links. The complete operating envelope, logic thresholds, capacitor requirements, and absolute maximum ratings must be taken from the manufacturer datasheet.

Datos de referencia de ingeniería para MAX232CWE-TG074 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MAX232CWE-TG074 for a new or existing 16-SOIC design that requires a two-driver, two-receiver RS-232 interface at up to 120kbps and complies with the MAX220-MAX249 EIA/TIA-232E and V.28/V.24 architecture. MAX232CWE and MAX232CWE+ are the closest same-family board-fit choices when their ordering conditions, temperature range, and qualification match the target design. Consider MAX232CSE+ when its narrow-body package dimensions match the PCB, and evaluate MAX232AWE+ or MAX232EWE+ against the required electrical ratings rather than package alone. No cross-brand drop-in part was explicitly identified in the available cross-reference results. For any candidate, verify supply voltage, logic thresholds, driver levels, charge-pump capacitor values, operating-temperature limits, and pin assignments in the manufacturer datasheet before release.

Comparación con alternativas

Parámetro Este producto MAX232CWE MAX232CWE+ MAX232AWE+ MAX232CSE+ MAX232EWE+
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Driver Channels 2 2 2 2 2 2
Receiver Channels 2 2 2 2 2 2

Diferenciadores clave

  • Established MAX232 family integration (frente a MAX232CWE)
  • Existing 16-SOIC board footprint (frente a MAX232CSE+)
  • Same channel count for embedded and industrial links (frente a MAX232AWE+)
  • Full-duplex RS-232 channel allocation (frente a MAX232EWE+)

Notas de diseño

Place the MAX232CWE-TG074 close to the RS-232 connector so the driver outputs and receiver inputs form short, direct routes. Position the charge-pump capacitors close to their designated IC pins and use the exact values and topology shown in the manufacturer application circuit. Keep the logic-side UART traces away from connector wiring, and provide a direct return-path strategy so receiver thresholds are not affected by large ground-potential differences.

RS-232 uses a bipolar voltage interface, so do not connect its driver outputs directly to a 5V UART. Confirm which connector pins are TX, RX, ground, and control, and cross-check the controller UART TX and RX assignments. Keep external protection components close to the connector and maintain symmetric routing where possible. Verify rise and fall times and data-rate margin against the 120kbps device limit in the manufacturer datasheet.

Do not substitute a different MAX232 order code solely from the package count. The A, C, and E family variants can share a 16-SOIC footprint while differing in temperature range, supply requirements, logic thresholds, or qualification conditions. Before reusing an existing PCB, compare the complete ordering information, electrical characteristics, exposed package dimensions, and manufacturer pinout. Also confirm that the charge-pump capacitor values used by the original design match the replacement.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance declarations were not identified in the available manufacturer-family and distributor information. Confirm the current declarations using the exact ordering code and manufacturer documentation.

Datos verificados el: 2026-11-09 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

max232cwe datasheet max232cwe pdf max232cwe datasheet pdf maxim max232cwe MAX232CWE-TG074 datasheet MAX232CWE-TG074 pinout MAX232CWE-TG074 equivalent MAX232CWE-TG074 replacement MAX232CWE-TG074 vs MAX232CWE MAX232CWE-TG074 price MAX232CWE-TG074 stock Analog Devices MAX232CWE-TG074 MAX232CWE-TG074 16-SOIC pinout MAX232CWE-TG074 application circuit

Componentes & términos relacionados

Analog Devices Maxim Integrated MAX232CWE-TG074 MAX232CWE MAX232CWE+ MAX232AWE+ MAX232CSE+ MAX232EWE+ RS-232 transceiver RS-232 driver RS-232 receiver line driver and receiver interface IC EIA/TIA-232E V.28 V.24 MAX220-MAX249 family 16-SOIC SOIC family surface mount SMD 120kbps charge-pump capacitor UART TTL/CMOS logic
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ