Analog Devices

MAX3221ECAE+T - 250kbps RS-232 Transceiver | Analog Devices

N.º de pieza: MAX3221ECAE+T ✓ Activo
3.0V to 5.5V Vdss approximately 1µA Id V.28 and V.24 Rds(on) 16-pin SSOP Package
MOQ: 1 |

MAX3221ECAE+T Descripción general

The Analog Devices MAX3221ECAE+T is a single-driver, single-receiver RS-232 transceiver operating from 3.0V to 5.5V at up to 250kbps in a 16-pin SSOP package. It integrates a charge-pump voltage converter, automatic shutdown and wake-up, and ±15kV ESD protection for compact, low-power serial-interface designs.

An RS-232 transceiver is a semiconductor interface that converts logic-level TTL or CMOS signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic levels. Positioned within the interface IC and power-management hierarchy, the MAX3221 supports point-to-point serial links in industrial control, instrumentation, data acquisition, and legacy peripheral equipment.

The MAX3221 uses one transmitter and one receiver, making it suitable for serial links requiring a single bidirectional channel. Its 3.0V to 5.5V supply range permits operation from both 3.3V and 5V systems. AutoShutdown reduces supply current to approximately 1µA when the receiver detects no valid signal, helping conserve power in intermittently connected equipment.

The integrated charge-pump circuitry develops the positive and negative voltages required by RS-232 without a separate power supply. Enhanced electrostatic-discharge protection is rated at ±15kV, an important consideration for exposed cables and connectors. The interface also operates at up to 250kbps, covering conventional asynchronous RS-232 communication rates while providing margin for modern firmware-based protocols.

Typical uses include RS-232 configuration ports on industrial controllers, test and measurement equipment, POS terminals, serial adapters, and embedded systems communicating with legacy peripherals. Because RS-232 is a single-ended, unbalanced standard, cable routing and grounding remain important, and long cables should be treated as potential sources of noise and ESD events.

Place the charge-pump capacitors and transceiver-side bypass capacitor close to their associated pins. Keep the RS-232 connector interface path physically separate from sensitive logic, and route the ground return appropriately for the installed cable. Verify baud-rate, logic-level, and supply compatibility before replacing another transceiver.

This page combines the manufacturer's RS-232 interface specifications, package information, sourcing guidance, and practical implementation considerations. It also organizes pin-compatible alternatives and explains where their ESD, power-management, and temperature-grade differences matter during component selection.

Alternativas directas para MAX3221ECAE+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX3221ECAE+T (mismo factor de forma y huella) — difiere en Supply Voltage Range, AutoShutdown Supply Current, Product Type, Package, ESD Protection.

Analog Devices
Supply Voltage Range: +3 V to +5.5 V
AutoShutdown Supply Current: 1 µA
Comparar con MAX3221ECAE+T →
Analog Devices
Supply Voltage Range: 3 V to 5.5 V
AutoShutdown Supply Current: 1 µA
Product Type: 1/1 full RS-232 transceiver
Comparar con MAX3221ECAE+T →
Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
Product Type: Single-channel RS-232 line driver/receiver transceiver
ESD Protection: ±15 kV
Comparar con MAX3221ECAE+T →
Texas Instruments
Supply Voltage Range: 3 V to 5.5 V
Product Type: Single-channel RS-232 line driver/receiver transceiver
ESD Protection: ±15 kV
Comparar con MAX3221ECAE+T →
Analog Devices
Supply Voltage Range: 3 V to 5.5 V
ESD Protection: ±15 kV
Comparar con MAX3221ECAE+T →
Analog Devices
AutoShutdown Supply Current: 1µA
Comparar con MAX3221ECAE+T →
Analog Devices
Supply Voltage Range: 3.0 V to 5.5 V
AutoShutdown Supply Current: Approximately 1 µA for the MAX3221 family
Package: 16-pin TSSOP
Comparar con MAX3221ECAE+T →

MAX3221CAE+T

✅ Sustitución directa
Analog Devices
📦 16-pin SSOP
1/1 full RS-232 transceiver · 1 driver · 1 receiver · 3 V to 5.5 V · 1 µA · AutoShutdown · RS-232 · 16-pin SSOP

Consulte el precio

Ver hoja de datos →

MAX3221EAE+T

✅ Sustitución directa
Analog Devices
📦 16-pin SSOP
RS-232 transceiver · 1 driver · 1 receiver · 3 V to 5.5 V · 16-pin SSOP · Surface mount · Approximately 1 µA · ±15 kV

Consulte el precio

Ver hoja de datos →

MAX3221EEAE+T

✅ Sustitución directa
📦 16-pin SSOP
Same 250kbps data rate and SSOP-16 footprint, a 0% data-rate difference, with fail-safe receiver characteristics distinguishing the ordering variant

📋 Alternativa de referencia (no en el catálogo)

MAX3221EMAE+T

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 16-pin SSOP
Same MAX3221 single-transceiver architecture and 250kbps data rate, a 0% data-rate difference, with different temperature-grade characteristics

📋 Alternativa de referencia (no en el catálogo)

ICL3221EIAZ+T

✅ Sustitución directa
📦 16-pin SSOP
Cross-brand single-channel RS-232 option with the same SSOP-16 footprint and up-to-250kbps class of operation, subject to pin and rating verification

📋 Alternativa de referencia (no en el catálogo)

MAX3221ECAE+T Especificaciones

Product Type RS-232 transceiver
Transmitter and Receiver Count 1 transmitter, 1 receiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
ESD Protection ±15kV
AutoShutdown Supply Current approximately 1µA
Interface Standard EIA/TIA-232
Supported V-Series Standards V.28 and V.24
Duplex Mode Full duplex
Encapsulado 16-pin SSOP
Tipo de montaje Surface mount
Automatic Shutdown Yes
Automatic Wake-Up Yes
Integrated Charge Pump Yes

Guía de configuración de pines de MAX3221ECAE+T 16-pin ssop

Configuración de pines para MAX3221ECAE+T (encapsulado 16-pin ssop). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin ssop para MAX3221ECAE+T

No hay datos detallados de patillaje disponibles para MAX3221ECAE+T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX3221ECAE+T es adecuado para 6 aplicacións: Industrial Controller Service Port, Portable Test and Measurement Equipment, Point-of-Sale Terminal Connectivity, Data Acquisition and Sensor Gateway, Legacy Equipment Communication Bridge, Network and Communications Equipment.

🏭

Industrial Controller Service Port

The MAX3221ECAE+T provides a single RS-232 channel for configuration, diagnostics, or firmware-loading ports on industrial controllers. Its 3.0V to 5.5V supply range fits both 3.3V and 5V embedded designs, while the 250kbps maximum rate supports conventional asynchronous service protocols. AutoShutdown is valuable when the controller spends most of its operating time disconnected from the service connector because the device can reduce supply current to approximately 1µA. The ±15kV ESD rating also helps protect the controller from charged cable and connector events. Engineers should confirm the logic thresholds and operating-temperature grade before release.

🔧

Portable Test and Measurement Equipment

The MAX3221ECAE+T is useful for battery- or USB-powered instruments that communicate through a legacy RS-232 port. A single transmitter and receiver are sufficient for a point-to-point instrument link, and operation from 3.0V to 5.5V simplifies integration with low-power control hardware. Automatic shutdown and wake-up can reduce quiescent consumption to approximately 1µA during idle periods, helping preserve operating time. The 250kbps rate accommodates many legacy instrument-control protocols, while ±15kV ESD protection adds resilience to frequently connected test leads. The PCB should place the charge-pump capacitors and supply bypass capacitor close to the IC pins.

🖥️

Point-of-Sale Terminal Connectivity

The MAX3221ECAE+T can serve as the interface between a modern POS controller and a legacy RS-232 peripheral such as a receipt printer, scanner, or customer display. Its single bidirectional RS-232 channel avoids using a multi-driver interface where only one peripheral port is required. The 250kbps capability supports standard asynchronous transactions, and the 3.0V to 5.5V operating range fits embedded terminal logic. AutoShutdown lowers power use when the peripheral is not connected, and the ±15kV ESD protection is useful at a cable-exposed connector. Firmware must also handle RS-232 handshake signals correctly when the attached peripheral requires hardware flow control.

📡

Data Acquisition and Sensor Gateway

The MAX3221ECAE+T can connect a compact data-acquisition unit or sensor gateway to a host computer through a legacy RS-232 link. The transceiver operates from 3.0V to 5.5V, allowing it to share a supply with common embedded processors, and its 250kbps maximum rate is appropriate for command and periodic measurement traffic. Automatic shutdown helps reduce power when the host is disconnected, while the integrated charge pump avoids a separate negative-voltage supply. The ±15kV ESD rating provides additional protection at an externally accessible port. A twisted pair with an appropriate ground reference is recommended for longer installations, and grounding should be verified to avoid injecting noise into the measurement system.

🌐

Legacy Equipment Communication Bridge

The MAX3221ECAE+T is appropriate for a communication bridge that connects a modern USB-capable controller to an older RS-232 appliance. One dedicated RS-232 channel is enough for the bridge's point-to-point link, and the 250kbps rate supports many legacy command protocols without requiring a higher-speed transceiver. The 3.0V to 5.5V supply range accommodates both 3.3V and 5V bridge hardware. AutoShutdown can reduce idle consumption to approximately 1µA, while ±15kV ESD protection helps the bridge withstand cable-borne discharge events. The bridge firmware should implement the required handshake timing and should test operation with the intended legacy equipment rather than assuming all RS-232 implementations are electrically identical.

🌐

Network and Communications Equipment

The MAX3221ECAE+T can provide a local console or out-of-band management connection for routers, switches, and other communications equipment. Its 250kbps rate is more than sufficient for terminal sessions and basic configuration tasks, while the integrated ±15kV ESD protection helps protect a management port connected to an external operator cable. The single-channel topology reduces board space compared with a dual-driver device, and the 3.0V to 5.5V supply range supports common logic rails. AutoShutdown is useful in systems where the management connector is accessed only occasionally. The chassis and signal-ground strategy should be engineered with the enclosure and cable installation in mind to minimize ground-loop and EMI issues.

What is the operating voltage of MAX3221ECAE+T?
The MAX3221ECAE+T operates from 3.0V to 5.5V, allowing it to interface with both 3.3V and 5V digital systems. According to the Analog Devices MAX3221 datasheet, its charge-pump circuitry generates the bipolar voltages required by an RS-232 link while the device itself is powered from a single low-voltage supply. This makes the transceiver suitable for compact embedded equipment, industrial controllers, and legacy serial peripherals that use a 3.3V or 5V control system.
What is the maximum data rate of MAX3221ECAE+T?
The MAX3221ECAE+T supports data rates up to 250kbps. According to the Analog Devices MAX3221 datasheet and product information, this rating applies to the single-driver, single-receiver RS-232 interface and is sufficient for common asynchronous serial communication links. Actual application throughput can also depend on the UART, protocol overhead, cable length, and signal-integrity conditions, so the highest baud rate should be validated in the complete equipment configuration.
Where can I download the MAX3221ECAE+T datasheet PDF?
The MAX3221ECAE+T datasheet and product documentation are available from the Analog Devices MAX3221 product page at https://www.analog.com/en/products/max3221.html. The manufacturer page provides the electrical characteristics, pin descriptions, charge-pump capacitor requirements, and application information needed for design review. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and use the application schematic as the basis for capacitor placement and RS-232 connector routing.
Where can I find the MAX3221ECAE+T pinout?
The MAX3221ECAE+T pinout is documented in the pin-description table of the Analog Devices MAX3221 datasheet and on the linked manufacturer product page. The device uses a 16-pin SSOP configuration, so the package drawing and pin table must be checked against the exact ordering code before layout release. The manufacturer documentation also shows the charge-pump capacitor connections, supply pins, transmitter output, receiver input, and enable functions needed to create a complete board layout.
What are the key specifications of MAX3221ECAE+T that engineers should know?
The MAX3221ECAE+T is a 1-transmitter, 1-receiver RS-232 transceiver with a 3.0V to 5.5V supply range, a maximum data rate of 250kbps, and ±15kV ESD protection. It also provides AutoShutdown and automatic wake-up, with supply current falling to approximately 1µA when no valid receiver signal is detected. According to the Analog Devices MAX3221 datasheet, its integrated charge-pump design requires external capacitors but avoids a separate bipolar RS-232 power supply.
What is the AutoShutdown feature in MAX3221ECAE+T?
AutoShutdown automatically disables the MAX3221ECAE+T when the receiver does not detect a valid signal, reducing supply current to approximately 1µA. According to the Analog Devices MAX3221 product information, the on-board supply and drivers shut down in this condition. The transmitter and receiver can subsequently wake when a valid signal returns, helping conserve power in portable instruments, test equipment, and serial adapters that are connected intermittently.
Is MAX3221ECAE+T suitable for industrial equipment?
The MAX3221ECAE+T is suitable for many industrial serial-interface applications because it supports 3.0V to 5.5V operation, 250kbps signaling, and ±15kV ESD protection. Its single RS-232 channel is appropriate for configuration links, service ports, and connections to legacy peripherals. Final suitability depends on the required temperature grade, isolation strategy, cable environment, and regulatory requirements, which should be confirmed from the manufacturer datasheet and the finished-system test plan.
What can replace MAX3221ECAE+T?
MAX3221CAE+T and MAX3221EAE+T are same-brand MAX3221-family alternatives that can provide a pin-compatible path when their temperature and ESD requirements match the target design. ICL3221EIAZ+T is a cross-brand SSOP-16 option identified in the comparison data. No replacement should be fitted solely from package appearance: confirm pin functions, supply range, data rate, ESD rating, operating temperature, and fail-safe receiver behavior in the candidate's datasheet before production use.
What is the best drop-in replacement for MAX3221ECAE+T?
The closest same-family drop-in choices are MAX3221CAE+T, MAX3221EAE+T, and MAX3221EEAE+T because they retain the MAX3221 interface architecture and 16-pin SSOP footprint. Their non-identical suffix characteristics still require verification, especially operating temperature and ESD behavior. ICL3221EIAZ+T offers a cross-brand SSOP-16 alternative, but its exact pin mapping and protection ratings must be checked before it is treated as a production drop-in replacement.
Is MAX3221ECAE+T the same as MAX3221CAE+T?
The MAX3221ECAE+T and MAX3221CAE+T belong to the same MAX3221 family and use the 16-pin SSOP interface architecture, but their ordering suffixes can represent different qualification or environmental characteristics. Both support the fundamental 1-transmitter, 1-receiver RS-232 function and operation from 3.0V to 5.5V. The manufacturer datasheet must be used to confirm the exact temperature range and ESD rating before treating one as a substitute for the other.
When should I choose MAX3221ECAE+T over MAX3221CAE+T?
Choose MAX3221ECAE+T when the design specifically requires the enhanced-device ordering characteristics associated with its suffix, while MAX3221CAE+T is suitable when its documented temperature and ESD ratings meet the installation requirements. The practical comparison is not based on the RS-232 data rate, because the core MAX3221 architecture remains the same. Confirm the operating-temperature grade, protection level, lifecycle status, and exact pin configuration for both parts in the Analog Devices documentation.
Is MAX3221ECAE+T suitable for a 3.3V embedded controller?
The MAX3221ECAE+T is suitable for a 3.3V embedded controller because its supply range includes 3.0V to 5.5V and its RS-232 interface uses standard logic-level signaling. According to the Analog Devices MAX3221 datasheet, the internal charge-pump circuitry provides the positive and negative RS-232 levels from the single low-voltage supply. The controller and transceiver grounds should be connected according to the manufacturer's application circuit, with the RS-232 connector protection and cable routing designed for the actual installation.
How do MAX3221ECAE+T and ICL3221EIAZ+T compare?
The MAX3221ECAE+T and ICL3221EIAZ+T are both associated with 16-pin SSOP single-channel RS-232 interface designs, but they are not proven interchangeable merely because the packages match. The MAX3221ECAE+T is specified at 250kbps with ±15kV ESD protection and AutoShutdown operation. Before using ICL3221EIAZ+T as a cross-brand substitute, compare its data rate, ESD rating, supply behavior, fail-safe receiver implementation, pin functions, and operating-temperature range against the finished design requirements.
Where can I buy MAX3221ECAE+T online?
Use the Request a Quote form on this page to request MAX3221ECAE+T availability, current commercial terms, and a lead-time quotation for the required quantity. The form lets the buyer specify the exact MAX3221ECAE+T ordering code and package quantity rather than relying on an ambiguous family listing. Confirm the manufacturer lifecycle status, date codes, and authorized supply before committing the component to a production schedule.
What is the price of MAX3221ECAE+T?
The current commercial price of MAX3221ECAE+T should be requested through the Request a Quote form on this page. Submit the required quantity, target delivery date, and acceptable shipment packaging to receive current terms. A quotation can also clarify stock position, lot traceability, date-code requirements, and whether the order will be supplied in the exact MAX3221ECAE+T tape-and-reel configuration required for automated assembly.
What is the lead time for MAX3221ECAE+T?
Request the current lead time for MAX3221ECAE+T through the Request a Quote form on this page. Include the required quantity, production start date, and any required date-code or traceability constraints in the request. Because lead time can change with inventory and manufacturing schedules, the quotation should be used for planning rather than a previously published listing date or a generic family-level availability statement.

Datos de referencia de ingeniería para MAX3221ECAE+T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX3221ECAE+T when the design needs one RS-232 channel, a 3.0V to 5.5V supply, operation up to 250kbps, automatic shutdown, and ±15kV ESD protection in an SSOP-16 footprint. Choose MAX3221CAE+T when its temperature and protection ratings meet the installation but the exact E-suffix characteristics are unnecessary. Choose MAX3221EEAE+T when its fail-safe receiver behavior is advantageous, and MAX3221EMAE+T when its documented temperature grade fits the deployment. Consider ICL3221EIAZ+T only after verifying pin functions, electrical limits, shutdown behavior, ESD rating, and lifecycle requirements. None of the alternatives should replace the target solely because their package dimensions match; the connector exposure, temperature range, grounding strategy, and protocol behavior determine the final selection.

Comparación con alternativas

Parámetro Este producto MAX3221CAE+T MAX3221EAE+T MAX3221EEAE+T MAX3221EMAE+T ICL3221EIAZ+T
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Renesas Electronics
Interface Type RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver RS-232 transceiver
Transmitter and Receiver Count 1 transmitter, 1 receiver 1 transmitter, 1 receiver 1 transmitter, 1 receiver 1 transmitter, 1 receiver 1 transmitter, 1 receiver 1 transmitter, 1 receiver

Diferenciadores clave

  • Single-channel footprint reduces board space (frente a MAX3232CDBR)
  • Single-supply operation with integrated charge pump (frente a MAX3221CAE+T)
  • Automatic low-power shutdown and wake-up (frente a ICL3221EIAZ+T)

Notas de diseño

Place the charge-pump capacitors, supply bypass capacitor, and receiver-input protection components directly beside their associated MAX3221ECAE+T pins. Keep the charge-pump loop compact to minimize switching-current area and EMI coupling into adjacent logic. Route the RS-232 connector nets separately from sensitive analog or high-speed digital traces, and provide the ground connection described in the manufacturer's application circuit.

Treat the RS-232 connector as an electrically noisy and externally accessible interface even though the transceiver provides ±15kV ESD protection. Use a properly rated cable, minimize unprotected stub lengths, and maintain an appropriate signal-ground reference. If the link is long or runs near motors and switching converters, verify the receiver's valid signal levels and noise margin in the completed system rather than relying only on the nominal 250kbps data-rate rating.

The MAX3221ECAE+T can reduce supply current to approximately 1µA when AutoShutdown detects no valid receiver signal. Do not assume the entire board reaches this value because the host UART, pull components, level shifters, and other peripherals also consume current. Measure shutdown current in the assembled design and verify that the receiver's wake-up behavior produces no false data or unexpected connector activity during startup.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The manufacturer documentation identifies the MAX3221 family and enhanced ESD capability, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established for the exact ordering code.

Datos verificados el: 2026-11-17 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX3221ECAE+T datasheet MAX3221ECAE+T pinout MAX3221ECAE+T datasheet pdf MAX3221ECAE+T replacement MAX3221ECAE+T equivalent MAX3221ECAE+T SSOP-16 MAX3221ECAE+T 250kbps MAX3221ECAE+T price MAX3221ECAE+T stock Analog Devices MAX3221ECAE+T MAX3221ECAE+T vs MAX3221CAE+T MAX3221ECAE+T vs ICL3221EIAZ+T

Componentes & términos relacionados

Analog Devices MAX3221ECAE+T MAX3221CAE+T MAX3221EAE+T MAX3221EEAE+T MAX3221EMAE+T ICL3221EIAZ+T RS-232 EIA/TIA-232 V.28 V.24 RS-232 transceiver interface IC semiconductor AutoShutdown charge-pump voltage converter ESD protection 250kbps 3.0V to 5.5V SSOP-16 surface mount RS-232 transceiver industrial controller test and measurement equipment
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ