MAX3221ECAE+T - 250kbps RS-232 Transceiver | Analog Devices
부품 번호: MAX3221ECAE+T ✓ 활성MAX3221ECAE+T 개요
An RS-232 transceiver is a semiconductor interface that converts logic-level TTL or CMOS signals into RS-232 voltage levels and converts incoming RS-232 signals back into logic levels. Positioned within the interface IC and power-management hierarchy, the MAX3221 supports point-to-point serial links in industrial control, instrumentation, data acquisition, and legacy peripheral equipment.
The MAX3221 uses one transmitter and one receiver, making it suitable for serial links requiring a single bidirectional channel. Its 3.0V to 5.5V supply range permits operation from both 3.3V and 5V systems. AutoShutdown reduces supply current to approximately 1µA when the receiver detects no valid signal, helping conserve power in intermittently connected equipment.
The integrated charge-pump circuitry develops the positive and negative voltages required by RS-232 without a separate power supply. Enhanced electrostatic-discharge protection is rated at ±15kV, an important consideration for exposed cables and connectors. The interface also operates at up to 250kbps, covering conventional asynchronous RS-232 communication rates while providing margin for modern firmware-based protocols.
Typical uses include RS-232 configuration ports on industrial controllers, test and measurement equipment, POS terminals, serial adapters, and embedded systems communicating with legacy peripherals. Because RS-232 is a single-ended, unbalanced standard, cable routing and grounding remain important, and long cables should be treated as potential sources of noise and ESD events.
Place the charge-pump capacitors and transceiver-side bypass capacitor close to their associated pins. Keep the RS-232 connector interface path physically separate from sensitive logic, and route the ground return appropriately for the installed cable. Verify baud-rate, logic-level, and supply compatibility before replacing another transceiver.
This page combines the manufacturer's RS-232 interface specifications, package information, sourcing guidance, and practical implementation considerations. It also organizes pin-compatible alternatives and explains where their ESD, power-management, and temperature-grade differences matter during component selection.
드롭인 대체품: MAX3221ECAE+T — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: MAX3221ECAE+T (동일 폼 팩터 및 풋프린트) — 차이점: Supply Voltage Range, AutoShutdown Supply Current, Product Type, Package, ESD Protection.
MAX3221CAE+T
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EAE+T
✅ 드롭인가격 문의
데이터시트 보기 →MAX3221EEAE+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221EMAE+T
✅ 드롭인 ⚠️ 사양 미검증📋 참조 대체품 (카탈로그에 없음)
ICL3221EIAZ+T
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
MAX3221ECAE+T 사양
| Product Type | RS-232 transceiver |
| Transmitter and Receiver Count | 1 transmitter, 1 receiver |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 250kbps |
| ESD Protection | ±15kV |
| AutoShutdown Supply Current | approximately 1µA |
| Interface Standard | EIA/TIA-232 |
| Supported V-Series Standards | V.28 and V.24 |
| Duplex Mode | Full duplex |
| 패키지 | 16-pin SSOP |
| 실장 유형 | Surface mount |
| Automatic Shutdown | Yes |
| Automatic Wake-Up | Yes |
| Integrated Charge Pump | Yes |
MAX3221ECAE+T 16-pin ssop 핀 구성 가이드
MAX3221ECAE+T(16-pin ssop 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: MAX3221ECAE+T.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
MAX3221ECAE+T 적합 용도: 6 애플리케이션s: Industrial Controller Service Port, Portable Test and Measurement Equipment, Point-of-Sale Terminal Connectivity, Data Acquisition and Sensor Gateway, Legacy Equipment Communication Bridge, Network and Communications Equipment.
Industrial Controller Service Port
The MAX3221ECAE+T provides a single RS-232 channel for configuration, diagnostics, or firmware-loading ports on industrial controllers. Its 3.0V to 5.5V supply range fits both 3.3V and 5V embedded designs, while the 250kbps maximum rate supports conventional asynchronous service protocols. AutoShutdown is valuable when the controller spends most of its operating time disconnected from the service connector because the device can reduce supply current to approximately 1µA. The ±15kV ESD rating also helps protect the controller from charged cable and connector events. Engineers should confirm the logic thresholds and operating-temperature grade before release.
추천
Portable Test and Measurement Equipment
The MAX3221ECAE+T is useful for battery- or USB-powered instruments that communicate through a legacy RS-232 port. A single transmitter and receiver are sufficient for a point-to-point instrument link, and operation from 3.0V to 5.5V simplifies integration with low-power control hardware. Automatic shutdown and wake-up can reduce quiescent consumption to approximately 1µA during idle periods, helping preserve operating time. The 250kbps rate accommodates many legacy instrument-control protocols, while ±15kV ESD protection adds resilience to frequently connected test leads. The PCB should place the charge-pump capacitors and supply bypass capacitor close to the IC pins.
추천
Point-of-Sale Terminal Connectivity
The MAX3221ECAE+T can serve as the interface between a modern POS controller and a legacy RS-232 peripheral such as a receipt printer, scanner, or customer display. Its single bidirectional RS-232 channel avoids using a multi-driver interface where only one peripheral port is required. The 250kbps capability supports standard asynchronous transactions, and the 3.0V to 5.5V operating range fits embedded terminal logic. AutoShutdown lowers power use when the peripheral is not connected, and the ±15kV ESD protection is useful at a cable-exposed connector. Firmware must also handle RS-232 handshake signals correctly when the attached peripheral requires hardware flow control.
추천
Data Acquisition and Sensor Gateway
The MAX3221ECAE+T can connect a compact data-acquisition unit or sensor gateway to a host computer through a legacy RS-232 link. The transceiver operates from 3.0V to 5.5V, allowing it to share a supply with common embedded processors, and its 250kbps maximum rate is appropriate for command and periodic measurement traffic. Automatic shutdown helps reduce power when the host is disconnected, while the integrated charge pump avoids a separate negative-voltage supply. The ±15kV ESD rating provides additional protection at an externally accessible port. A twisted pair with an appropriate ground reference is recommended for longer installations, and grounding should be verified to avoid injecting noise into the measurement system.
추천
Legacy Equipment Communication Bridge
The MAX3221ECAE+T is appropriate for a communication bridge that connects a modern USB-capable controller to an older RS-232 appliance. One dedicated RS-232 channel is enough for the bridge's point-to-point link, and the 250kbps rate supports many legacy command protocols without requiring a higher-speed transceiver. The 3.0V to 5.5V supply range accommodates both 3.3V and 5V bridge hardware. AutoShutdown can reduce idle consumption to approximately 1µA, while ±15kV ESD protection helps the bridge withstand cable-borne discharge events. The bridge firmware should implement the required handshake timing and should test operation with the intended legacy equipment rather than assuming all RS-232 implementations are electrically identical.
추천
Network and Communications Equipment
The MAX3221ECAE+T can provide a local console or out-of-band management connection for routers, switches, and other communications equipment. Its 250kbps rate is more than sufficient for terminal sessions and basic configuration tasks, while the integrated ±15kV ESD protection helps protect a management port connected to an external operator cable. The single-channel topology reduces board space compared with a dual-driver device, and the 3.0V to 5.5V supply range supports common logic rails. AutoShutdown is useful in systems where the management connector is accessed only occasionally. The chassis and signal-ground strategy should be engineered with the enclosure and cable installation in mind to minimize ground-loop and EMI issues.
추천
추천 제품 요약
엔지니어링 참조 데이터: MAX3221ECAE+T — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX3221CAE+T | MAX3221EAE+T | MAX3221EEAE+T | MAX3221EMAE+T | ICL3221EIAZ+T |
|---|---|---|---|---|---|---|
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Renesas Electronics |
| Interface Type | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver | RS-232 transceiver |
| Transmitter and Receiver Count | 1 transmitter, 1 receiver | 1 transmitter, 1 receiver | 1 transmitter, 1 receiver | 1 transmitter, 1 receiver | 1 transmitter, 1 receiver | 1 transmitter, 1 receiver |
주요 차별점
- Single-channel footprint reduces board space (vs MAX3232CDBR)
- Single-supply operation with integrated charge pump (vs MAX3221CAE+T)
- Automatic low-power shutdown and wake-up (vs ICL3221EIAZ+T)
설계 노트
Place the charge-pump capacitors, supply bypass capacitor, and receiver-input protection components directly beside their associated MAX3221ECAE+T pins. Keep the charge-pump loop compact to minimize switching-current area and EMI coupling into adjacent logic. Route the RS-232 connector nets separately from sensitive analog or high-speed digital traces, and provide the ground connection described in the manufacturer's application circuit.
Treat the RS-232 connector as an electrically noisy and externally accessible interface even though the transceiver provides ±15kV ESD protection. Use a properly rated cable, minimize unprotected stub lengths, and maintain an appropriate signal-ground reference. If the link is long or runs near motors and switching converters, verify the receiver's valid signal levels and noise margin in the completed system rather than relying only on the nominal 250kbps data-rate rating.
The MAX3221ECAE+T can reduce supply current to approximately 1µA when AutoShutdown detects no valid receiver signal. Do not assume the entire board reaches this value because the host UART, pull components, level shifters, and other peripherals also consume current. Measure shutdown current in the assembled design and verify that the receiver's wake-up behavior produces no false data or unexpected connector activity during startup.
규정 준수 정보
The manufacturer documentation identifies the MAX3221 family and enhanced ESD capability, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was established for the exact ordering code.