Analog Devices

MAX3232ECWE+T - 1Mbps Dual RS-232 Transceiver | Analog Devices

N.º de pieza: MAX3232ECWE+T ✓ Activo
3.0 V to 5.5 V Vdss 10 nA Id 16-pin SOIC Package
MOQ: 1 |

MAX3232ECWE+T Descripción general

Analog Devices MAX3232ECWE+T is a dual, full-duplex RS-232 transceiver designed for data rates up to 1 Mbps, with operation from a 3.0 V to 5.5 V supply. It provides two drivers and two receivers in a 16-pin SOIC package and is specified for ±15 kV ESD protection. The transceiver family also supports low-power operation with shutdown load current down to 10 nA.

An RS-232 transceiver is an interface IC that converts digital logic-level signals into RS-232 line levels and converts received RS-232 signals back into CMOS-compatible levels. In the broader hierarchy, the MAX3232 belongs to the interface IC category, connects digital systems to the RS-232 physical layer, and is commonly positioned between a UART, microcontroller, or industrial controller and an external RS-232 port. Its integrated level translation reduces the number of external components required for a conventional RS-232 connection.

Key features include true RS-232 operation, 3.0 V to 5.5 V supply compatibility, data rates up to 1 Mbps, and ESD protection rated to ±15 kV. The two-driver, two-receiver arrangement supports one full-duplex RS-232 port with independently assignable driver and receiver channels. Low-power shutdown capability is useful when a connected equipment must reduce current consumption while preserving the link for later restart.

The MAX3232 family uses charge-pump circuitry to generate the positive and negative voltages required by RS-232 from a single low-voltage supply. This allows operation from 3.0 V to 5.5 V without a negative supply rail. The MAX3232E devices maintain pin, package, and functional compatibility with the industry-standard MAX232, which simplifies upgrades in existing RS-232 designs.

Typical uses include industrial control consoles, data acquisition equipment, test and measurement instruments, point-of-sale terminals, and service interfaces for embedded systems. The 1 Mbps maximum data rate is suitable for short-distance serial links carrying configuration data, status messages, and command traffic. A receiving system must still account for RS-232 cable length, grounding, and signal-integrity limitations.

For reliable layout, follow the manufacturer datasheet capacitor recommendations and place charge-pump and interface-decoupling components close to their associated pins. Keep the RS-232 connector path physically separated from sensitive analog and high-speed digital traces, and provide a suitable chassis or signal ground strategy to reduce ground-offset errors.

This product page consolidates the exact orderable MPN, key electrical ratings, drop-in replacement options, interface applications, and implementation guidance. It also distinguishes direct same-footprint choices from alternatives that require a separate qualification review before use in an existing board.

Alternativas directas para MAX3232ECWE+T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MAX3232ECWE+T (mismo factor de forma y huella) — difiere en ESD Protection, Maximum Data Rate, Supply Voltage Range, Product Type, Transceiver Configuration.

Analog Devices
ESD Protection: ±15kV
Maximum Data Rate: 1Mbps
Supply Voltage Range: 3.0V to 5.5V
Comparar con MAX3232ECWE+T →
Maxim Integrated
Product Type: RS-232 transceiver
Comparar con MAX3232ECWE+T →
Analog Devices
ESD Protection: ±15kV
Maximum Data Rate: 1Mbps
Supply Voltage Range: 3.0V to 5.5V
Comparar con MAX3232ECWE+T →
MaxLinear
ESD Protection: 15 kV
Maximum Data Rate: 250 kbps
Supply Voltage Range: +3.0 V to +5.5 V
Comparar con MAX3232ECWE+T →

MAX3232ECWE+

✅ Sustitución directa
Maxim Integrated
📦 16-pin SOIC
RS-232 transceiver · 2 · 2 · Full-duplex · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA

Consulte el precio

Ver hoja de datos →

MAX3232EEWE+TG1Z

✅ Sustitución directa
Analog Devices
📦 16-pin SOIC
2 transmitters and 2 receivers · Full RS-232 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · 16-SOIC · Surface mount

Consulte el precio

Ver hoja de datos →

MAX3232ECPE+

✅ Sustitución directa
Analog Devices
📦 16-pin SOIC
Dual RS-232 transceiver · 2 · 2 · 3.0V to 5.5V · 1Mbps · ±15kV · Down to 10nA · True RS-232

Consulte el precio

Ver hoja de datos →

SP3232EBCN-L

✅ Sustitución directa
MaxLinear
📦 16-pin SOIC
2/2 RS-232 transceiver · 2 drivers · 2 receivers · 250 kbps · +3.0 V to +5.5 V · 0 °C to +70 °C · 15 kV · 0.1 µF in 3.3 V operation

Consulte el precio

Ver hoja de datos →

ICL3232IBNZ-T

✅ Sustitución directa
📦 16-pin SOIC
Identified as a similar 2/2 RS-232 interface device in the same 16-pin SOIC footprint; detailed differences may remain within up to 20% on secondary parameters, so receiver thresholds, ESD rating, and temperature grade require verification.

📋 Alternativa de referencia (no en el catálogo)

HIN232ACBNZ-T

✅ Sustitución directa
📦 16-pin SOIC
Identified as a similar dual RS-232 transceiver in the same 16-pin SOIC footprint; the principal interface function is retained with up to 20% variation possible in secondary electrical characteristics.

📋 Alternativa de referencia (no en el catálogo)

MAX3232ECWE+T Especificaciones

Product Type Dual RS-232 transceiver
Transceiver Configuration 2 driver and 2 receiver channels
Operating Mode Full RS-232
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Shutdown Supply Current 10 nA
Encapsulado 16-pin SOIC
Tipo de montaje Surface mount
Estado RoHS unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

Guía de configuración de pines de MAX3232ECWE+T 16-pin soic

Configuración de pines para MAX3232ECWE+T (encapsulado 16-pin soic). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado 16-pin soic para MAX3232ECWE+T

No hay datos detallados de patillaje disponibles para MAX3232ECWE+T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX3232ECWE+T es adecuado para 6 aplicacións: Industrial Control Console, Data Acquisition Equipment, Test and Measurement Instrument, Point-of-Sale Terminal, Embedded System Service Port, Network Equipment Maintenance Interface.

🏭

Industrial Control Console

The MAX3232ECWE+T is suitable for an industrial controller that exposes a service or configuration port through RS-232. Its 3.0 V to 5.5 V operating range allows connection to either 3.3 V or 5 V logic, while the two transmitters and two receivers support a full-duplex link. The 1 Mbps maximum rate is more than adequate for command exchange and status reporting over a short cable. The ±15 kV ESD rating adds protection at an exposed connector, although board-level routing and grounding remain necessary.

📟

Data Acquisition Equipment

A laboratory data-acquisition unit can use the MAX3232ECWE+T to connect a host computer or service laptop to an embedded controller. The device translates between CMOS logic and true RS-232 levels while operating from a single 3.0 V to 5.5 V rail, eliminating a separate negative supply. Its 1 Mbps capability supports rapid command and result transfers. Place the charge-pump capacitors according to the datasheet and separate the cable-side routing from sensitive measurement circuitry to minimize noise coupling.

🔧

Test and Measurement Instrument

The MAX3232ECWE+T fits remote control and firmware-update ports in test and measurement instruments where a legacy RS-232 interface remains required. The 16-pin SOIC package supports compact board layouts, and the single-supply operation simplifies systems built around either 3.3 V or 5 V components. Full-duplex capability permits simultaneous command transmission and response reception. Designers should use low-inductance routing for charge-pump nodes and verify connector-level ESD and cable-routing requirements.

🖥️

Point-of-Sale Terminal

Point-of-sale peripherals commonly use RS-232 for receipt printers, scanners, or customer displays. The MAX3232ECWE+T provides two transmit and two receive channels, allowing a full-duplex connection to equipment with a standard DB9 interface. Its 3.0 V to 5.5 V supply compatibility reduces power-supply complexity, and the 1 Mbps rate provides ample margin for transaction traffic. The ±15 kV ESD specification is particularly relevant near user-accessible connectors, although the enclosure and ground strategy also affect reliability.

🧩

Embedded System Service Port

An embedded controller can use the MAX3232ECWE+T for manufacturing, configuration, or diagnostic access without exposing raw CMOS pins. The integrated level translators create the required positive and negative RS-232 voltages from one 3.0 V to 5.5 V supply. The 10 nA shutdown current can help a portable or intermittently powered product reduce consumption when the port is disabled. Firmware should also handle transient states and ensure that the host grounds the interface appropriately to avoid latch-up from ground offsets.

🌐

Network Equipment Maintenance Interface

The MAX3232ECWE+T can implement a local maintenance or out-of-band management connection on networking equipment. Two RS-232 channels provide the basic full-duplex signaling needed by legacy management ports, and the 1 Mbps maximum data rate exceeds the throughput of typical terminal sessions. Operation from 3.3 V or 5 V rails supports mixed-voltage designs. Keep the protected RS-232 trace away from Ethernet magnetics and high-speed clock lines, and verify the chassis-ground strategy at the connector.

What is the operating voltage of MAX3232ECWE+T?
The MAX3232ECWE+T operates from 3.0 V to 5.5 V. According to the Analog Devices MAX3232 datasheet, the device can therefore be used with both 3.3 V and 5 V system rails without an external negative power supply. Its integrated charge-pump circuitry generates the bipolar voltage levels required for true RS-232 communication. Place the specified input bypass capacitor close to the supply pin and follow the datasheet layout guidance to minimize supply noise and switching transients.
What are the key specifications of MAX3232ECWE+T that engineers should know?
The MAX3232ECWE+T is a 3.0 V to 5.5 V, 1 Mbps, 2/2 full RS-232 transceiver in a 16-pin SOIC package. The Analog Devices MAX3232 datasheet also identifies ±15 kV ESD protection and shutdown supply current down to 10 nA. Its two transmitters and two receivers support a full-duplex serial link, while the single-supply charge-pump design eliminates the need for a separate negative rail.
Where can I download the MAX3232ECWE+T datasheet PDF?
The official MAX3232 datasheet is available through the Analog Devices product page at https://www.analog.com/en/products/max3232.html, which links to the manufacturer documentation. The target is the MAX3232ECWE+T orderable variant in the 16-pin SOIC package. Use the pin-description table, electrical characteristics, and recommended application circuit in that datasheet when assigning PCB nets, selecting capacitors, and verifying RS-232 signal levels.
Where to find the MAX3232ECWE+T pinout?
The MAX3232ECWE+T pinout is shown in the Analog Devices MAX3232 datasheet and is a 16-pin SOIC arrangement. Use the manufacturer pin-description table when connecting the two RS-232 driver inputs, two driver outputs, two receiver inputs, receiver outputs, supply pins, ground pins, and charge-pump capacitor nodes. Verify the ordering variant because related MAX3232 family members can use different temperature-grade or package-ordering suffixes.
What can replace the MAX3232ECWE+T on an existing PCB?
The MAX3232ECWE+T can be replaced by a pin-compatible MAX3232-family device in the same 16-pin SOIC footprint when its supply, data-rate, ESD, and shutdown requirements also meet the system specification. MAX3232EEWE+T and MAX3232ECWE+ are same-footprint candidates from Analog Devices, while SP3232EBCN-L, ICL3232IBNZ-T, and HIN232ACBNZ-T are cross-brand candidates identified for comparison. Confirm every electrical limit and pin function before substitution.
What is the best drop-in replacement for MAX3232ECWE+T?
MAX3232ECWE+ is the closest same-footprint replacement for MAX3232ECWE+T because it retains the MAX3232ECWE device identity and 16-pin SOIC construction while differing primarily in orderable packaging notation. MAX3232EEWE+T is another same-brand option for designs whose temperature grade and detailed ratings remain acceptable. Before replacing the component, verify supply voltage, maximum data rate, ESD rating, shutdown behavior, and every pin connection against the original design requirements.
Is MAX3232ECWE+T the same as MAX3232ECWE+?
MAX3232ECWE+T and MAX3232ECWE+ denote the same MAX3232ECWE device family in the 16-pin SOIC package, with the orderable suffix distinguishing packaging or reel configuration. The MAX3232E family is identified by Analog Devices as pin, package, and functionally compatible with the industry-standard MAX232. Engineers should nevertheless confirm the temperature grade and shipment form associated with the exact suffix before consolidating BOM items.
Where to buy MAX3232ECWE+T online?
Use the Request a Quote form on this XAIPART page to request MAX3232ECWE+T availability, order quantities, and the appropriate packaging configuration. The form is the preferred route for current commercial terms and production scheduling. Engineers should specify the exact MAX3232ECWE+T suffix, required reel quantity, and destination country so the quotation corresponds to the intended 16-pin SOIC orderable device.
What is the price of MAX3232ECWE+T?
Current commercial pricing for the MAX3232ECWE+T is presented through the Request a Quote form on this page rather than as a static price statement. Submit the required quantity, packaging preference, and delivery destination to obtain a current quotation. This approach also allows the order to be checked against the exact MAX3232ECWE+T orderable code, helping avoid accidental substitution of the non-tape-and-reel MAX3232ECWE listing.
What is the lead time for MAX3232ECWE+T?
Request the current lead time for MAX3232ECWE+T through the Request a Quote form on this page. Lead time can depend on order quantity, reel configuration, and manufacturing availability, so a production-planning figure should be tied to the requested shipment details. The Analog Devices product page identifies MAX3232 as a production family, while the quotation process confirms the current schedule for the exact orderable MPN.
Is MAX3232ECWE+T in stock?
Current stock for MAX3232ECWE+T should be confirmed through the Request a Quote form on this page. Provide the required quantity, packaging details, and target delivery date so availability can be matched to the production plan. The 16-pin SOIC orderable designation MAX3232ECWE+T should be stated exactly when requesting the quotation to avoid confusion with the closely related MAX3232ECWE listing.
MAX3232ECWE+T vs MAX3232EEWE+T - which is better for industrial equipment?
MAX3232EEWE+T is the better candidate when its temperature grade and electrical ratings satisfy the industrial specification, because it is identified as an industrial alternative to MAX3232ECWE+T in the family comparison. MAX3232ECWE+T remains appropriate when the original specified device meets the required environmental range. The decisive checks are operating temperature, supply voltage, data rate, ESD protection, shutdown current, and exact 16-pin SOIC pin compatibility.
What is the difference between MAX3232ECWE+T and SP3232EBCN-L?
The MAX3232ECWE+T and SP3232EBCN-L are presented as functionally equivalent and pin-compatible options in the cross-reference information, but they remain products from different manufacturers. Both target the same RS-232 interface class, while detailed limits such as receiver input range, driver output behavior, temperature range, and shutdown details can differ. Review the respective manufacturer datasheets before treating the cross-brand part as an unrestricted drop-in replacement.
When should I choose MAX3232ECWE+T over ICL3232IBNZ-T?
Choose MAX3232ECWE+T when the design is already qualified around the Analog Devices MAX3232E family or when its documented 3.0 V to 5.5 V supply operation, 1 Mbps rate, ±15 kV ESD rating, and shutdown current are the governing requirements. Choose ICL3232IBNZ-T only after checking its pin functions and electrical ratings against the original design. The cross-reference listing identifies it as similar, so qualification remains necessary.
What is the best cross-brand equivalent for MAX3232ECWE+T?
SP3232EBCN-L is the strongest listed cross-brand candidate for MAX3232ECWE+T because the MaxLinear cross-reference explicitly identifies MAX3232ECWE as functionally equivalent and pin compatible with it. ICL3232IBNZ-T and HIN232ACBNZ-T are also identified as similar parts. No cross-brand device should be treated as an automatic replacement until its 16-pin SOIC layout, supply range, data rate, ESD rating, receiver thresholds, and shutdown behavior match the system requirements.

Datos de referencia de ingeniería para MAX3232ECWE+T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX3232ECWE+T for a new or existing 16-pin SOIC design that needs a 2/2 full-duplex RS-232 interface operating from 3.0 V to 5.5 V at up to 1 Mbps. MAX3232ECWE+ is the most direct same-device choice when only the orderable packaging notation differs, while MAX3232EEWE+T is useful when its environmental grade meets the product requirements. For cross-brand sourcing, SP3232EBCN-L is the strongest candidate because the cross-reference explicitly identifies pin compatibility with MAX3232ECWE. ICL3232IBNZ-T and HIN232ACBNZ-T are similar interface parts, but their detailed limits should be compared before use. Final selection must cover pin functions, supply range, receiver thresholds, data rate, ESD rating, temperature range, shutdown behavior, and connector grounding rather than package name alone.

Comparación con alternativas

Parámetro Este producto MAX3232ECWE+ MAX3232EEWE+T MAX3232ECPE SP3232EBCN-L ICL3232IBNZ-T HIN232ACBNZ-T
Brand Analog Devices Analog Devices Analog Devices Analog Devices MaxLinear Renesas Electronics Renesas Electronics
Package 16-pin SOIC 16-pin SOIC - same footprint 16-pin SOIC - same footprint 16-pin SOIC - same footprint 16-pin SOIC - same footprint 16-pin SOIC - same footprint 16-pin SOIC - same footprint
Operating Mode Full RS-232 Full RS-232 Full RS-232 Full RS-232 RS-232 RS-232 RS-232

Diferenciadores clave

  • Single-supply true RS-232 operation (frente a MAX3232EEWE+T)
  • Explicit pin-compatible cross-brand pathway (frente a SP3232EBCN-L)
  • ESD protection for exposed serial connectors (frente a ICL3232IBNZ-T)
  • Low-power shutdown capability (frente a HIN232ACBNZ-T)

Notas de diseño

Place the charge-pump capacitors and input bypass capacitor close to their associated MAX3232ECWE+T pins, following the Analog Devices recommended layout. Keep the charge-pump node traces short, use an uninterrupted ground reference, and avoid routing them beneath or parallel to sensitive measurement inputs. The datasheet capacitor values should be implemented as close to the device as practical because trace inductance can increase supply and line-voltage transients.

Do not treat the MAX3232ECWE+T as a TTL or RS-422 differential transceiver. RS-232 uses positive and negative signal levels and is commonly implemented with point-to-point wiring and a shared signal reference. Review receiver thresholds, driver output levels, and the exact connector pinout before replacing the device with another family member. In particular, verify that any cross-brand candidate retains the same 16-pin SOIC functions and supply behavior.

Separate the cable-side RS-232 traces from clocks, ADC inputs, sensitive analog nodes, and switching-power circuits. Route the connector interface directly toward the transceiver, provide the recommended protection network at exposed connectors, and connect the board ground using an application-appropriate signal or chassis-ground strategy. Long cables can accumulate ground offsets, so software and system-level fault handling should account for commutation events and communication loss.

Use a supply that remains within 3.0 V to 5.5 V under transient and load conditions, and verify the upstream regulator can support the MAX3232ECWE+T operating current plus charge-pump demand. Although shutdown supply current can fall to 10 nA, the active-state current must be checked from the datasheet rather than inferred from the shutdown figure. Confirm the bypass-capacitor value and stability recommendations directly from the manufacturer documentation.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MAX3232 is an industrial interface IC rather than an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable suffix and current manufacturer documentation.

Datos verificados el: 2026-11-17 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX3232ECWE+T datasheet MAX3232ECWE+T pinout MAX3232ECWE+T datasheet pdf MAX3232ECWE+T equivalent MAX3232ECWE+T replacement MAX3232ECWE+T cross reference MAX3232ECWE+T footprint MAX3232ECWE+T price MAX3232ECWE+T stock Analog Devices MAX3232ECWE+T MAX3232ECWE+T vs MAX3232EEWE+T MAX3232ECWE+T RS-232 1Mbps

Componentes & términos relacionados

Analog Devices MAX3232ECWE+T MAX3232ECWE+ MAX3232EEWE+T MAX3232ECPE SP3232EBCN-L ICL3232IBNZ-T HIN232ACBNZ-T RS-232 transceiver RS-232 interface IC line-level interface full-duplex communications charge-pump voltage converter ESD protection 3.0 V to 5.5 V supply 1 Mbps data rate 10 nA shutdown current 16-pin SOIC SOIC package family surface-mount package industrial control data acquisition test and measurement point-of-sale terminal
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ