Maxim Integrated

MAX359EPE - Fault-Protected 4:1 Analog Multiplexer | Maxim

N.º de pieza: MAX359EPE ✓ Activo
1.8 kOhm Rds(on) 16-pin PDIP Package
MOQ: 1 |

MAX359EPE Descripción general

The Maxim Integrated MAX359EPE is a fault-protected dual 4:1 analog multiplexer packaged in a 16-pin PDIP. It uses a series N-channel, P-channel, N-channel switch structure to improve protection when the device is powered while its input or output pins exceed the supply rails. The circuit can select one of four differential signal pairs for connection to two common outputs, making it useful for controlled analog-routing and measurement systems.

An analog multiplexer is an interface IC that routes multiple analog inputs through a shared output path under digital control. A 4:1 multiplexer reduces the number of signal lines required when several sources must be measured sequentially. The MAX359 extends this function with fault-protection circuitry intended to limit damage caused by overvoltage conditions. In the system hierarchy, it belongs to analog switches and multiplexers, interface ICs, and the broader semiconductor category.

The MAX359 family provides two independently selectable 4:1 configurations, giving 8 differential input channels in total. According to the MAX359 manufacturer product page, the MAX359 is the four-channel differential, 2-of-8 multiplexer, while the MAX358 is an eight-channel single-ended 1-of-8 device. Its specified on resistance is 1.8 kOhm. The MAX359EPE is identified as an industrial-temperature component, and the E suffix denotes the manufacturer ordering variant shown in the product records.

The internal series N-channel, P-channel, N-channel arrangement is specifically intended to improve fault protection compared with simpler multiplexer implementations. This architecture matters when analog inputs can temporarily exceed the supply voltages. The active device still has defined supply limits, and the manufacturer should be consulted before applying voltages beyond its absolute maximum ratings or using the multiplexer as a substitute for dedicated protection components.

Typical uses include multichannel instrumentation, sensor acquisition, battery and power-system monitoring, industrial control, and laboratory test equipment. Differential routing is particularly useful for rejecting common-mode disturbance when paired signals share similar noise characteristics. The two 4:1 sections can also support redundant or comparative measurements when the system must route more than one signal group to shared processing circuitry.

For PCB design, place the device so that muxed analog traces remain short and are surrounded by a stable ground reference. Keep external switching or protection components close to exposed connector pins, and route digital select inputs away from sensitive analog inputs to reduce crosstalk. Before power-up, verify every control and signal pin against the manufacturer's operating limits. The family datasheet and pin-description table should define the correct pin assignments and supply requirements.

This page combines the manufacturer function description, package and routing characteristics, practical design guidance, sourcing questions, and qualified drop-in alternatives. It also separates exact ordering variants from package changes, helping engineers identify whether a proposed replacement preserves the original 16-pin PDIP footprint and electrical behavior.

Alternativas directas para MAX359EPE — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

MAX359EPE+

✅ Sustitución directa
📦 PDIP-16
Retains the 4:1 differential multiplexing configuration and 16-pin PDIP footprint; the suffix indicates the manufacturer's updated ordering version with no quantified electrical difference established in the available records.

📋 Alternativa de referencia (no en el catálogo)

MAX359CPE

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 PDIP-16
Retains the dual 4:1 differential function and 16-pin PDIP format; the C temperature-grade suffix differs from the E industrial-grade designation of MAX359EPE.

📋 Alternativa de referencia (no en el catálogo)

MAX359EPA

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 PDIP-16
Retains the dual 4:1 differential function and 16-pin PDIP format; the ordering suffix differs while its electrical rating and lifecycle status require manufacturer-ordering-table confirmation.

📋 Alternativa de referencia (no en el catálogo)

MAX359EPE Especificaciones

Product Type Fault-protected analog multiplexer
Multiplexer Configuration Dual 4:1
Differential Channels 8 channels in two 4-channel differential groups
On Resistance 1.8 kOhm
Switch Circuit 2 circuit IC switch, 4:1
Fault Protection Enabled
Internal Protection Structure Series N-channel, P-channel, N-channel
Encapsulado 16-pin PDIP
Package Type Through-hole PDIP
Tipo de montaje Through-hole
Temperature Grade Industrial
Number of Terminals 16
Analog Signal Type Differential

Guía de configuración de pines de MAX359EPE through-hole pdip

Configuración de pines para MAX359EPE (encapsulado through-hole pdip). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.

Diagrama de patillaje del encapsulado through-hole pdip para MAX359EPE

No hay datos detallados de patillaje disponibles para MAX359EPE.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MAX359EPE es adecuado para 6 aplicacións: Differential Sensor Acquisition, Industrial Process Monitoring, Battery Monitoring Systems, Test and Measurement Systems, Data Acquisition and Instrumentation, Redundant Signal Comparison.

🧩

Differential Sensor Acquisition

The MAX359EPE fits multichannel differential sensor acquisition because its two fault-protected 4:1 sections can route eight differential inputs through shared processing channels. The 1.8 kOhm on resistance must be considered alongside the sensor output impedance and amplifier input bias current to avoid measurement gain errors. Pairing related signals on differential paths also helps reject common-mode noise. Before implementation, confirm the switch leakage, off-isolation, switching time, and channel-selection truth table in the MAX359 family datasheet.

🏭

Industrial Process Monitoring

The MAX359EPE is appropriate for industrial process monitoring when several differential sensor or transducer signals must be sampled by one analog front end. Its dual 4:1 organization reduces analog routing complexity, while fault protection adds resilience when a connected input temporarily moves outside the expected range. Design the enclosure for the E-grade industrial variant, keep traces away from switching nodes, and verify that every external source remains within the absolute maximum ratings. The manufacturer data sheet should govern supply sequencing and control-state behavior.

⚡

Battery Monitoring Systems

The MAX359EPE can route several differential battery or power-system voltages into a shared monitoring path, simplifying the number of analog input connections required on a controller board. The two differential 4:1 sections support parallel comparison of voltage, current, and temperature channels. Because battery systems can experience large transients, use the device's fault-protection capability as one layer of protection rather than the only protection. Confirm the maximum signal excursion, supply range, and whether an external clamp is required before selecting the multiplexer.

🔧

Test and Measurement Systems

The MAX359EPE is useful in test and measurement equipment that must connect multiple differential sources to one measurement chain without duplicating front-end circuitry. Its stated 1.8 kOhm on resistance should be included in the input-impedance and settling analysis, particularly for high-accuracy systems. Keep connector traces short and use a stable ground plane to minimize switching transients. Because the exact isolation and bandwidth figures are not stated on the product page, engineers should read the MAX359 family data sheet before setting measurement accuracy limits.

📡

Data Acquisition and Instrumentation

The MAX359EPE supports compact data-acquisition systems by consolidating multiple differential inputs into two multiplexed outputs. This allows a shared converter or instrumentation amplifier to process several channels sequentially, provided the multiplexer settling behavior is included in the sampling plan. Route the analog paths away from digital select lines and place optional protection components near connectors. Confirm the exact enable and select logic, supply limits, channel count, and control timing against the manufacturer pin-description table before laying out the PCB.

🖥️

Redundant Signal Comparison

The MAX359EPE can support redundant or comparative signal routing by using its two 4:1 differential sections to select channels for side-by-side measurement. This is useful in condition-monitoring and diagnostic equipment where two related signals must be evaluated through a common analog path. The switch's 1.8 kOhm on resistance and source-to-source variation affect common-mode rejection and channel balance, so characterize the complete measurement path. Also define fail-safe control states so an invalid mux selection cannot expose downstream circuitry to an unintended source.

Resumen de productos recomendados

MAX359EPE Maxim Integrated Se usa en: Differential Sensor Acquisition, Industrial Process Monitoring, Battery Monitoring Systems, Test and Measurement Systems, Data Acquisition and Instrumentation, Redundant Signal Comparison MAX358 Related single-ended multiplexer Se usa en: Differential Sensor Acquisition, Data Acquisition and Instrumentation HI-509A Related fault-protected differential multiplexer Se usa en: Industrial Process Monitoring, Redundant Signal Comparison MAX354 Related Maxim multiplexer family Se usa en: Battery Monitoring Systems HI-508A Related fault-protected multiplexer Se usa en: Test and Measurement Systems
What is the MAX359EPE?
The MAX359EPE is a fault-protected dual 4:1 analog multiplexer in a 16-pin PDIP package. According to the MAX359 manufacturer product page, the device contains two differential 4:1 switching sections, providing eight differential input channels in total. It uses a series N-channel, P-channel, N-channel structure to improve fault protection when a connected signal exceeds the normal supply range. Its stated on resistance is 1.8 kOhm.
How many channels can the MAX359EPE route?
The MAX359EPE provides two independent 4:1 differential switching sections. According to the MAX359 manufacturer product page, the family is a four-channel differential 2-of-8 multiplexer, while the related MAX358 is an eight-channel single-ended 1-of-8 multiplexer. Digital select inputs determine which differential pair is connected to the common outputs. Exact enable and select truth-table details should be taken from the MAX359 family pin-description table.
What is the on resistance of MAX359EPE?
The MAX359EPE has a stated on resistance of 1.8 kOhm, as identified in the manufacturer and distributor product records. This parameter represents the resistance through a closed analog switch and influences signal attenuation, drive requirements, and achievable accuracy in high-impedance measurement circuits. The complete on-resistance curve versus applied voltage and configuration should be checked in the manufacturer datasheet before finalizing a precision analog design.
Why does the MAX359 include fault protection?
The MAX359 includes fault protection to improve tolerance of analog inputs that exceed the normal supply range. According to the MAX359 manufacturer description, the protection uses a series N-channel, P-channel, N-channel switch structure. This architecture can limit fault current under specified overvoltage conditions, although it does not permit operation beyond the device's absolute maximum ratings. External clamps or limiters may still be required when the source can exceed those ratings.
MAX359EPE vs MAX359CPE: which is the better replacement?
MAX359CPE is a same-family option for designs that can accommodate its temperature grade, while MAX359EPE is the industrial-temperature ordering variant specified here. Both use the MAX359 fault-protected dual 4:1 architecture and a 16-pin PDIP format according to the family records. Before substitution, verify the manufacturer ordering table for electrical ratings, operating-temperature limits, marking, and availability. Do not interchange the temperature grades without checking the end application's ambient and enclosure temperatures.
Can MAX359EPE+ replace MAX359EPE?
MAX359EPE+ is the closest identified ordering alternative because it retains the MAX359 function and 16-pin PDIP format. The product records list MAX359EPE+ as a fault-protected analog switch and multiplexer, but the manufacturer ordering information should confirm whether its electrical ratings and lifecycle status are identical. Verify the pin assignments, supply limits, and temperature grade before treating it as a drop-in replacement.
What can replace MAX359EPE?
MAX359EPE+ and MAX359CPE are the identified same-family candidates for a replacement because they preserve the MAX359 dual 4:1 differential multiplexing function and 16-pin PDIP format. The MAX359EPE+ has explicit web evidence for the PDIP-16 package, while MAX359CPE appears in a family supplier listing but needs confirmation of its full ordering details. No cross-brand part was confirmed as pin-to-pin and electrically compatible.
Is MAX359EPE suitable for differential sensor acquisition?
Yes, the MAX359EPE is suitable for differential sensor acquisition when the source levels remain within its specified operating limits. Its two differential 4:1 sections can route multiple sensor pairs to shared analog-processing circuitry, while the stated 1.8 kOhm on resistance must be included in the source and input-impedance calculation. Differential routing can reduce common-mode pickup, although sensor output impedance, settling time, leakage, and channel isolation remain critical.
Where can I download the MAX359EPE datasheet PDF?
The authoritative MAX359 family documentation is available through the Analog Devices MAX359 product page at https://www.analog.com/en/products/MAX359.html. Its Documents and Resources section provides the manufacturer data sheet. The MAX359EPE is an orderable variant of the MAX359 family, so use the ordering-information section to map the EPE suffix to the correct temperature grade and package. Do not infer pin functions from a comparison page.
Where can I find the MAX359EPE pinout?
The MAX359EPE pinout is found in the pin-description section of the MAX359 manufacturer data sheet linked from the official product page. The component is a 16-pin PDIP, but the individual terminal names and their numbering must be read directly from that table before assigning PCB nets. Do not rely on a generic DIP pinout because the two multiplexer sections, select inputs, supplies, and enable functions have fixed device-specific assignments.
How much does MAX359EPE cost?
Current pricing and stock for MAX359EPE should be requested through the Request a Quote form on this page. The visible pricing interface reflects the exact ordering variant, package, and quantity requested, which is useful for a legacy 16-pin PDIP part with several temperature-grade options. MOQ, manufacturing traceability, and lead time should be confirmed with the quote team before committing a production bill of materials.
Where can I buy MAX359EPE online?
The MAX359EPE can be requested through the Request a Quote form on this page. Provide the exact MPN, required quantity, target lead time, and any assembly or traceability requirements. This keeps the inquiry focused on MAX359EPE rather than another MAX359 package or temperature-grade variant. Confirm the returned line item, manufacturer suffix, packaging, and lifecycle status before releasing a purchase order.
What is the lead time for MAX359EPE?
The current lead time for MAX359EPE should be confirmed through the Request a Quote form on this page. Lead time can vary with exact quantity, authorized sourcing availability, inspection requirements, and whether the order includes multiple MAX359 temperature-grade variants. Provide the production forecast and required delivery date so the quote can identify an appropriate supply path for the 16-pin PDIP configuration.
Is MAX359EPE in stock?
Use the Request a Quote form on this page to request current MAX359EPE availability. Stock status for this exact suffix should be confirmed rather than inferred from broader MAX359 family listings, because the EPE package and temperature-grade combination define a distinct orderable line. Include your required quantity and target date so the response reflects an actionable supply position.
What are the key specifications engineers should know about MAX359EPE?
The principal MAX359EPE specifications are a fault-protected dual 4:1 differential configuration, eight differential input channels arranged as two 4:1 groups, a 1.8 kOhm on resistance, and a 16-pin PDIP package. According to the MAX359 manufacturer product page, the internal protection structure is a series N-channel, P-channel, N-channel arrangement. Supply limits, exact temperature range, isolation, switching time, and pin logic must be confirmed from the manufacturer data sheet.
Is MAX359EPE the same as MAX359EWE?
No, MAX359EPE and MAX359EWE belong to the same MAX359 family but use different package types. Product comparison records identify MAX359EPE as the PDIP-16 version and MAX359EWE as the 16-SOIC version. Their electrical function is closely related, but a surface-mount replacement is not pin-compatible with the original through-hole footprint and therefore cannot serve as a drop-in replacement without a PCB change.

Datos de referencia de ingeniería para MAX359EPE — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MAX359EPE when the design needs a fault-protected, dual 4:1 differential multiplexer in a 16-pin PDIP and the equipment operates in an industrial temperature environment. MAX359EPE+ is the closest ordering-version candidate and should be selected when the manufacturer confirms equivalent ratings, lifecycle status, and availability. MAX359CPE or MAX359EPA may fit an existing 16-pin PDIP design only after their temperature grade and electrical ratings are verified. MAX359EWE shares the basic multiplexer function but changes to a 16-SOIC footprint, so it is appropriate only when the PCB can change. MAX358 is better suited to single-ended routing rather than differential pairs. Final selection should consider on resistance, off-isolation, leakage, settling time, supply range, control logic, and protection limits together.

Comparación con alternativas

Parámetro Este producto MAX359EPE+ MAX359CPE MAX359EPA
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Function Fault-protected dual 4:1 analog multiplexer Fault-protected dual 4:1 analog multiplexer Dual 4:1 analog multiplexer Dual 4:1 analog multiplexer
Multiplexer Configuration Dual 4:1 Dual 4:1 Dual 4:1 Dual 4:1
Signal Type Differential Differential Differential Differential
Fault Protection Enabled Enabled Enabled Enabled
Number of Terminals 16 16 16 16

Diferenciadores clave

  • Fault-protected analog routing (frente a MAX359EPE+)
  • Differential channel organization (frente a MAX358)
  • Through-hole package compatibility (frente a MAX359EWE)
  • Defined on resistance (frente a MAX359CPE)

Notas de diseño

Route each multiplexed analog node as a short, impedance-controlled trace surrounded by a continuous ground reference. Place the MAX359 close to the connector or sensor interface and preserve symmetry between paired differential inputs. Keep the digital select and enable traces away from the analog paths, and avoid sharing a narrow neck between the multiplexer outputs and downstream amplifiers. These practices reduce capacitive coupling and preserve the differential signal relationship.

Treat the fault-protection structure as limited internal protection rather than an unrestricted surge suppressor. Establish the signal-source maximum, normal supply range, and absolute maximum ratings before connecting external equipment. If an input can exceed those limits or sustain sustained overvoltage, add an appropriate external clamp or series impedance. Also decouple the supplies close to the device and verify power-up and power-down behavior against the MAX359 family datasheet.

Do not treat every MAX359 suffix as a PCB-compatible replacement. MAX359EPE is a 16-pin PDIP, while MAX359EWE is identified as a 16-SOIC and requires a different footprint. Similarly, temperature-grade suffixes must be checked against the system's ambient range. For any proposed substitute, compare the pin-description table, supply limits, on-resistance behavior, fault-protection rating, enable logic, and control truth table before approving the substitution.

Include the 1.8 kOhm on resistance when calculating gain error, input loading, and amplifier headroom. For high-accuracy measurements, also evaluate source impedance, switch leakage, off-isolation, charge injection, and settling time from the family data sheet. Allow sufficient acquisition time after changing a selection state. If the source impedance is high, add a suitable buffer close to the multiplexer so channel resistance does not dominate the measurement node.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The MAX359 family is an industrial-grade industrial and instrumentation interface component; no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified in the available product records.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MAX359EPE datasheet MAX359EPE pinout MAX359EPE datasheet pdf MAX359EPE specifications MAX359EPE equivalent MAX359EPE replacement MAX359EPE cross reference MAX359EPE vs MAX359CPE MAX359EPE vs MAX359EWE MAX359EPE footprint Maxim Integrated MAX359EPE MAX359EPE price MAX359EPE stock MAX359 dual 4:1 multiplexer MAX359 differential sensor switching

Componentes & términos relacionados

Maxim Integrated Analog Devices MAX359EPE MAX359EPE+ MAX359CPE MAX359EPA MAX359EWE MAX358 HI-508A HI-509A analog multiplexer analog switch fault-protected multiplexer differential multiplexer dual 4:1 multiplexer interface IC semiconductor on resistance fault protection common-mode rejection PDIP-16 DIP package through-hole package industrial temperature grade series N-channel P-channel N-channel
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ