MAX381CPE+ - Dual 35Ω SPST Analog Switch | Maxim Integrated
N.º de pieza: MAX381CPE+ ✗ Fin de vidaMAX381CPE+ Descripción general
A CMOS analog switch is an integrated semiconductor device that uses controlled transistors to connect or disconnect an analog signal path. The MAX381/MAX383/MAX385 family comprises precision, low-voltage switches for instrumentation, test equipment, control systems, and signal-routing applications. Within the broader semiconductor hierarchy, an analog switch belongs to the interface-IC category and provides a controllable connection between an input terminal and an output terminal.
The MAX381CPE+ contains two independent SPST, normally open switch circuits in a 1:1 configuration. Its specified 35 Ω on-resistance minimizes signal attenuation in moderate-impedance analog systems. The device also features matched channels, with a specified channel-to-channel on-resistance matching of 500 mΩ, helping preserve balance in differential or dual-channel signal paths.
Analog-signal performance includes charge injection of 2 pC, off-state channel capacitance of 12 pF, and crosstalk of -90 dB at 1 MHz. The MAX381 family supports both single-supply and bipolar-supply operation, allowing the switch to process signals referenced to ground or operate within positive and negative voltage rails. Its normally open configuration keeps the switched paths disconnected when the control state is inactive.
Typical uses include precision measurement front ends, automated test equipment, sensor signal routing, sample-and-hold circuits, and industrial control systems. The two integrated switches can route two related channels when matched behavior is useful, or independently route separate low-voltage signals. The 16-pin PDIP package also supports through-hole prototyping and legacy industrial equipment where surface-mount conversion would be inconvenient.
When laying out a design, place the IC close to the switched signal paths and keep analog traces short to minimize parasitic capacitance and interference. Treat the control inputs as logic signals while ensuring that every driven input remains within the device's specified supply-voltage limits. Verify signal amplitude, bandwidth, charge injection, and off-state leakage against the application before committing to a high-impedance instrumentation design.
This product page combines the MAX381CPE+ electrical characteristics, package details, lifecycle information, sourcing workflow, application guidance, and verified cross-reference analysis. It also distinguishes true pin-and-package drop-in options from related switches that use different packages or implement different circuit topologies.
Alternativas directas para MAX381CPE+ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
No hay alternativas directas disponibles para este producto.
Solicitar alternativasMAX381CPE+ Valores máximos y características eléctricas
| Number of Switch Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| Switch Type | SPST, normally open |
| On-Resistance | 35 Ω |
| Tensión de alimentación de funcionamiento | 3 V to 15 V |
| Charge Injection | 2 pC |
| Crosstalk | -90 dB at 1 MHz |
| Channel-to-Channel On-Resistance Matching | 500 mΩ |
| Off-State Channel Capacitance | 12 pF |
| Rango de temperatura de funcionamiento | 0 °C to 70 °C |
| Encapsulado | 16-DIP, 0.300 inch pitch, 7.62 mm |
| Tipo de montaje | Through-hole |
| Supply Operation | Single-supply or bipolar-supply |
| Signal Handling | Rail-to-rail |
| Technology | CMOS |
Guía de configuración de pines de MAX381CPE+ 16-dip, 0.300 inch pitch, 7.62 mm
Configuración de pines para MAX381CPE+ (encapsulado 16-dip, 0.300 inch pitch, 7.62 mm). La numeración de pines, las funciones y los diagramas de conexión se definen en la hoja de datos del fabricante. Consúltela para conocer el footprint exacto y las directrices de soldadura.
No hay datos detallados de patillaje disponibles para MAX381CPE+.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MAX381CPE+ es adecuado para 6 aplicacións: Precision Measurement Front Ends, Automated Test Equipment, Sensor Signal Routing, Sample-and-Hold Signal Paths, Industrial Control Signal Routing, Laboratory Signal Switching.
Precision Measurement Front Ends
The MAX381CPE+ is appropriate for switching low-level sensor or instrument signals into a measurement chain because its 35 Ω on-resistance limits insertion loss in moderate-impedance paths and its two channels can process related inputs. According to the Maxim Integrated datasheet, channel-to-channel on-resistance matching is 500 mΩ, which helps preserve balance between paired measurements. Charge injection of 2 pC and off-state capacitance of 12 pF should be included in the error budget when the source impedance is high. The normally open SPST topology also provides a defined disconnected state between measurements.
Recomendado
Automated Test Equipment
The MAX381CPE+ can route test excitation or return signals in legacy automated test equipment where a dual, normally open analog switch is required. Its 35 Ω on-resistance provides a practical path for medium-impedance test networks, while -90 dB crosstalk at 1 MHz limits interaction between channels around the stated test condition. According to the Maxim Integrated datasheet, the device supports 3 V to 15 V operation, allowing use in compact low-voltage test systems. Designers should still account for 2 pC charge injection, 12 pF off-state capacitance, and the obsolete lifecycle status when planning production spares.
Recomendado
Sensor Signal Routing
The MAX381CPE+ fits legacy sensor interfaces that need to route one of two low-voltage signals into a shared amplifier or converter. The dual SPST structure permits independent control of the selected paths, and 35 Ω on-resistance is useful when the sensor and downstream circuitry form a moderate-impedance system. According to the Maxim Integrated datasheet, matched channels differ by 500 mΩ and the switch can handle signals from single or bipolar supplies. High-impedance sensors require an additional error analysis covering the specified 2 pC charge injection and 12 pF off-state channel capacitance.
Recomendado
Sample-and-Hold Signal Paths
The MAX381CPE+ can implement a normally open routing element in low-voltage sample-and-hold or signal-isolation arrangements. Its 35 Ω on-resistance reduces the resistance introduced into the sampled path, while the 2 pC charge-injection specification provides a concrete basis for calculating switching disturbance. According to the Maxim Integrated datasheet, the device supports rail-to-rail signal handling from single or bipolar supplies. The two channels can also support differential or complementary routing, provided the selected wiring preserves the required channel matching.
Recomendado
Industrial Control Signal Routing
The MAX381CPE+ is applicable to legacy industrial control systems that switch low-voltage command, reference, or feedback signals through a 3 V to 15 V control rail. The two normally open SPST channels provide independent connectivity and can be driven in a defined sequence by suitable control logic. According to the Maxim Integrated datasheet, the device offers 35 Ω on-resistance, rail-to-rail handling, and single- or bipolar-supply operation. Industrial deployments should check the specified 0 °C to 70 °C ambient range and plan long-term maintenance because the device is marked obsolete.
Recomendado
Laboratory Signal Switching
The MAX381CPE+ can serve in laboratory and educational instruments that need a compact, dual-channel low-voltage switch. Its 35 Ω on-resistance is practical for common source impedances, while the two matched channels help maintain balance in paired instruments. According to the Maxim Integrated datasheet, crosstalk is -90 dB at 1 MHz, off-state capacitance is 12 pF, and charge injection is 2 pC. The 16-DIP package simplifies through-hole construction, although a modern instrument design should compare these legacy characteristics with an active equivalent before committing the platform.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MAX381CPE+ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto |
|---|---|
| Brand | Maxim Integrated |
| Package | 16-DIP, 0.300 inch pitch, 7.62 mm |
| Number of Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| Switch Type | SPST, normally open |
| On-Resistance | 35 Ω |
| Operating Supply Voltage | 3 V to 15 V |
| Charge Injection | 2 pC |
| Crosstalk | -90 dB at 1 MHz |
| Channel Matching | 500 mΩ |
| Off-State Channel Capacitance | 12 pF |
| Operating Temperature Range | 0 °C to 70 °C |
Diferenciadores clave
- Dual normally open SPST channels (frente a MAX381ESE+)
- Matched dual-channel resistance (frente a MAX383CPE+)
- Single- and bipolar-supply flexibility (frente a MAX385CPE+)
- Through-hole legacy compatibility (frente a MAX381ESE+)
Notas de diseño
Route switched analog signals directly between the MAX381CPE+ and their source and destination, keeping traces short and away from digital control lines. The specified 12 pF off-state channel capacitance makes board-level parasitics especially relevant in high-impedance designs. Place the IC near the connector or sensor interface, and provide a ground-return path that does not share switching-current paths with sensitive analog nodes.
Calculate switching disturbance from the specified 2 pC charge injection and the effective resistance presented by the source network. A higher source impedance increases the voltage step associated with injected charge, so a 2 pC specification may be unsuitable for demanding precision applications. Also evaluate the 35 Ω on-resistance against source and load impedance, plus the stated -90 dB crosstalk at 1 MHz when signals occupy nearby frequency bands.
Operate the MAX381CPE+ within its specified 3 V to 15 V supply range and confirm that the selected single-supply or bipolar configuration keeps every switched signal and control input within the absolute maximum limits. Add local supply bypassing close to the device using the capacitance recommended by the Maxim Integrated datasheet. Pay particular attention to supply sequencing in bipolar operation so control logic is never driven outside its valid input range.
Do not substitute the MAX381ESE+ as a direct replacement because it uses a narrow SOIC-16 package while the MAX381CPE+ uses a 16-DIP package. Verify the actual pin assignments, control polarity, switch state, and operating limits before using any related member of the MAX381/MAX383/MAX385 family. For maintenance production, request traceability and inspection information because the MAX381CPE+ is marked obsolete.
Información de cumplimiento
The accessible product information identifies the device as an obsolete Maxim Integrated analog switch but does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this legacy analog switch is not presented as an automotive-qualified device.