Maxim Integrated

MAX381CPE+ - Dual 35Ω SPST Analog Switch | Maxim Integrated

料号: MAX381CPE+ ✗ 停产
3 V to 15 V Vdss 35 Ω Rds(on) 16-DIP, 0.300 inch pitch, 7.62 mm Package
最小起订量: 1 |

MAX381CPE+ 概述

Maxim Integrated MAX381CPE+ is a dual, single-pole single-throw normally open CMOS analog switch with 35 Ω on-resistance, supplied in a 16-pin PDIP package. The device operates from 3 V to 15 V, supports single-supply or bipolar operation, and is designed to route low-voltage analog signals with low on-resistance and rail-to-rail signal handling.

A CMOS analog switch is an integrated semiconductor device that uses controlled transistors to connect or disconnect an analog signal path. The MAX381/MAX383/MAX385 family comprises precision, low-voltage switches for instrumentation, test equipment, control systems, and signal-routing applications. Within the broader semiconductor hierarchy, an analog switch belongs to the interface-IC category and provides a controllable connection between an input terminal and an output terminal.

The MAX381CPE+ contains two independent SPST, normally open switch circuits in a 1:1 configuration. Its specified 35 Ω on-resistance minimizes signal attenuation in moderate-impedance analog systems. The device also features matched channels, with a specified channel-to-channel on-resistance matching of 500 mΩ, helping preserve balance in differential or dual-channel signal paths.

Analog-signal performance includes charge injection of 2 pC, off-state channel capacitance of 12 pF, and crosstalk of -90 dB at 1 MHz. The MAX381 family supports both single-supply and bipolar-supply operation, allowing the switch to process signals referenced to ground or operate within positive and negative voltage rails. Its normally open configuration keeps the switched paths disconnected when the control state is inactive.

Typical uses include precision measurement front ends, automated test equipment, sensor signal routing, sample-and-hold circuits, and industrial control systems. The two integrated switches can route two related channels when matched behavior is useful, or independently route separate low-voltage signals. The 16-pin PDIP package also supports through-hole prototyping and legacy industrial equipment where surface-mount conversion would be inconvenient.

When laying out a design, place the IC close to the switched signal paths and keep analog traces short to minimize parasitic capacitance and interference. Treat the control inputs as logic signals while ensuring that every driven input remains within the device's specified supply-voltage limits. Verify signal amplitude, bandwidth, charge injection, and off-state leakage against the application before committing to a high-impedance instrumentation design.

This product page combines the MAX381CPE+ electrical characteristics, package details, lifecycle information, sourcing workflow, application guidance, and verified cross-reference analysis. It also distinguishes true pin-and-package drop-in options from related switches that use different packages or implement different circuit topologies.

直接替换替代料: MAX381CPE+ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

该产品暂无直接替换替代料。

请求替代料

MAX381CPE+ 最大额定值与电气特性

Number of Switch Circuits 2 circuits
Switch Configuration 1:1
Switch Type SPST, normally open
On-Resistance 35 Ω
工作电源电压 3 V to 15 V
Charge Injection 2 pC
Crosstalk -90 dB at 1 MHz
Channel-to-Channel On-Resistance Matching 500 mΩ
Off-State Channel Capacitance 12 pF
工作温度范围 0 °C to 70 °C
封装 16-DIP, 0.300 inch pitch, 7.62 mm
安装类型 Through-hole
Supply Operation Single-supply or bipolar-supply
Signal Handling Rail-to-rail
Technology CMOS

MAX381CPE+ 16-dip, 0.300 inch pitch, 7.62 mm 引脚配置指南

MAX381CPE+(16-dip, 0.300 inch pitch, 7.62 mm 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

MAX381CPE+ 的 16-dip, 0.300 inch pitch, 7.62 mm 封装引脚图

暂无详细引脚数据: MAX381CPE+.

请参阅 数据手册 以查看完整引脚配置。

典型应用

MAX381CPE+ 适用于 6 应用s: Precision Measurement Front Ends, Automated Test Equipment, Sensor Signal Routing, Sample-and-Hold Signal Paths, Industrial Control Signal Routing, Laboratory Signal Switching.

🧩

Precision Measurement Front Ends

The MAX381CPE+ is appropriate for switching low-level sensor or instrument signals into a measurement chain because its 35 Ω on-resistance limits insertion loss in moderate-impedance paths and its two channels can process related inputs. According to the Maxim Integrated datasheet, channel-to-channel on-resistance matching is 500 mΩ, which helps preserve balance between paired measurements. Charge injection of 2 pC and off-state capacitance of 12 pF should be included in the error budget when the source impedance is high. The normally open SPST topology also provides a defined disconnected state between measurements.

🖥️

Automated Test Equipment

The MAX381CPE+ can route test excitation or return signals in legacy automated test equipment where a dual, normally open analog switch is required. Its 35 Ω on-resistance provides a practical path for medium-impedance test networks, while -90 dB crosstalk at 1 MHz limits interaction between channels around the stated test condition. According to the Maxim Integrated datasheet, the device supports 3 V to 15 V operation, allowing use in compact low-voltage test systems. Designers should still account for 2 pC charge injection, 12 pF off-state capacitance, and the obsolete lifecycle status when planning production spares.

🏭

Sensor Signal Routing

The MAX381CPE+ fits legacy sensor interfaces that need to route one of two low-voltage signals into a shared amplifier or converter. The dual SPST structure permits independent control of the selected paths, and 35 Ω on-resistance is useful when the sensor and downstream circuitry form a moderate-impedance system. According to the Maxim Integrated datasheet, matched channels differ by 500 mΩ and the switch can handle signals from single or bipolar supplies. High-impedance sensors require an additional error analysis covering the specified 2 pC charge injection and 12 pF off-state channel capacitance.

⚡

Sample-and-Hold Signal Paths

The MAX381CPE+ can implement a normally open routing element in low-voltage sample-and-hold or signal-isolation arrangements. Its 35 Ω on-resistance reduces the resistance introduced into the sampled path, while the 2 pC charge-injection specification provides a concrete basis for calculating switching disturbance. According to the Maxim Integrated datasheet, the device supports rail-to-rail signal handling from single or bipolar supplies. The two channels can also support differential or complementary routing, provided the selected wiring preserves the required channel matching.

🏭

Industrial Control Signal Routing

The MAX381CPE+ is applicable to legacy industrial control systems that switch low-voltage command, reference, or feedback signals through a 3 V to 15 V control rail. The two normally open SPST channels provide independent connectivity and can be driven in a defined sequence by suitable control logic. According to the Maxim Integrated datasheet, the device offers 35 Ω on-resistance, rail-to-rail handling, and single- or bipolar-supply operation. Industrial deployments should check the specified 0 °C to 70 °C ambient range and plan long-term maintenance because the device is marked obsolete.

🔧

Laboratory Signal Switching

The MAX381CPE+ can serve in laboratory and educational instruments that need a compact, dual-channel low-voltage switch. Its 35 Ω on-resistance is practical for common source impedances, while the two matched channels help maintain balance in paired instruments. According to the Maxim Integrated datasheet, crosstalk is -90 dB at 1 MHz, off-state capacitance is 12 pF, and charge injection is 2 pC. The 16-DIP package simplifies through-hole construction, although a modern instrument design should compare these legacy characteristics with an active equivalent before committing the platform.

推荐产品汇总

MAX383CPE+ Related low-voltage switch family member with SPDT switching 用于: Precision Measurement Front Ends, Sensor Signal Routing, Sample-and-Hold Signal Paths, Industrial Control Signal Routing, Laboratory Signal Switching MAX385CPE+ Related low-voltage switch family member with DPDT switching 用于: Precision Measurement Front Ends, Automated Test Equipment, Sensor Signal Routing, Sample-and-Hold Signal Paths, Industrial Control Signal Routing MAX381CPE+ Maxim Integrated 用于: Automated Test Equipment, Laboratory Signal Switching
What is the MAX381CPE+ used for?
The MAX381CPE+ is a dual-channel, normally open CMOS analog switch used to route low-voltage signals in precision measurement, test, sensor, and control systems. According to the Maxim Integrated datasheet, it provides two 1:1 SPST switch circuits, 35 Ω on-resistance, and operation from 3 V to 15 V. The two independent channels can handle separate signals or balanced pairs when matched behavior is important.
What are the key specifications of MAX381CPE+ that engineers should know?
The MAX381CPE+ is a dual SPST normally open analog switch with 35 Ω on-resistance in a 16-pin PDIP package. According to the Maxim Integrated datasheet, its operating supply range is 3 V to 15 V, charge injection is 2 pC, crosstalk is -90 dB at 1 MHz, and channel-to-channel on-resistance matching is 500 mΩ. The device also supports single-supply and bipolar-supply operation for rail-to-rail signal handling.
Where can I download the MAX381CPE+ datasheet PDF?
The MAX381CPE+ datasheet PDF can be downloaded from the product documentation link on this page. The document identifies the part as a precision, low-voltage analog switch and provides its pin, electrical-characteristic, and application information. The linked PDF is the MAX381CPE+ datasheet mirror identified for this exact MPN; consult the pin-description table before assigning PCB connections.
Where can I find the MAX381CPE+ pinout?
Use the pin-description table in the Maxim Integrated MAX381CPE+ datasheet to locate the complete 16-pin PDIP pinout. This page does not reproduce the pin numbers because the accessible product records do not provide the individual pin-name assignments. Assign the control, common, and switched terminals directly from the datasheet diagram, and verify signal direction and switch state before fabrication.
What is the supply voltage range of MAX381CPE+?
The MAX381CPE+ operates from 3 V to 15 V. According to the Maxim Integrated datasheet, it supports single-supply and bipolar-supply configurations, allowing bipolar signals when positive and negative rails are used. The control inputs and switched signal voltages must remain within the device's specified operating limits, particularly during power-up, shutdown, and rail-sequencing transitions.
What is the on-resistance of MAX381CPE+?
The MAX381CPE+ has a specified on-resistance of 35 Ω. According to the Maxim Integrated datasheet, its channel-to-channel on-resistance matching is 500 mΩ. This low-resistance characteristic is useful in moderate-impedance analog paths, although the resulting insertion loss and bandwidth should be evaluated together with source impedance, load capacitance, and the selected operating frequency.
Can MAX381CPE+ handle bipolar signals?
Yes, the MAX381CPE+ can support bipolar operation when powered from positive and negative supply rails. According to the Maxim Integrated datasheet, the device is a precision low-voltage CMOS switch with rail-to-rail analog signal handling and a stated supply range of 3 V to 15 V. The analog signal must remain inside the permitted input and output limits for the selected supply configuration.
What is the best drop-in replacement for MAX381CPE+?
No confirmed pin-to-pin, same-package drop-in replacement for the MAX381CPE+ was identified. The closely related MAX381ESE+ uses a narrow SOIC-16 package rather than the MAX381CPE+'s 16-DIP package, so it is not a drop-in replacement without PCB changes. Treat the obsolete marking as a lifecycle risk and validate any substitution against pinout, supply voltage, on-resistance, and leakage before production use.
Can MAX381ESE+ replace MAX381CPE+?
No, the MAX381ESE+ is not a direct drop-in replacement for the MAX381CPE+. According to the available comparison information, the MAX381ESE+ uses a narrow SOIC-16 package, while the MAX381CPE+ uses a 16-DIP package with 0.300 inch, 7.62 mm pitch. Although the devices may be electrically related, changing packages requires a PCB redesign and connector-layout review.
When should I choose MAX381CPE+ over a newer analog switch?
Choose the MAX381CPE+ only when an existing design specifically requires its 16-DIP footprint, dual normally open SPST topology, 35 Ω on-resistance, and compatible supply range. Because the device is obsolete, a new design should prefer an active, currently supported switch after confirming equivalent logic levels, bandwidth, leakage, charge injection, and pin compatibility. The original part is best treated as a maintenance option for proven legacy equipment.
Is MAX381CPE+ suitable for precision instrumentation?
The MAX381CPE+ is suitable for many low-voltage precision-instrumentation signal paths because it offers 35 Ω on-resistance, 2 pC charge injection, -90 dB crosstalk at 1 MHz, and 500 mΩ channel matching. According to the Maxim Integrated datasheet, it supports rail-to-rail handling and bipolar operation. Suitability still depends on the source impedance, signal bandwidth, leakage requirements, and temperature range of the finished instrument.
How should I use the MAX381CPE+ in a dual-channel circuit?
Use the two MAX381CPE+ switch channels independently for unrelated signals, or operate them together when matched routing is advantageous for a differential or paired measurement. The Maxim Integrated datasheet specifies two 1:1 SPST normally open circuits, so each channel requires its own control signal unless the design intentionally shares one. Check control polarity and off-state behavior against the pin-description table before wiring.
What are the thermal and layout considerations for MAX381CPE+?
Keep the MAX381CPE+ close to the source and destination of the analog signals, and minimize the length of high-impedance traces around the switched nodes. Place any required bypass capacitors close to the supply pins and route control signals away from sensitive analog paths. According to the Maxim Integrated datasheet, off-state channel capacitance is 12 pF, so parasitic routing capacitance is especially relevant in precision and high-bandwidth layouts.
Where can I buy MAX381CPE+ online?
The MAX381CPE+ can be requested through the Request a Quote form on this page. The form is the appropriate workflow for an obsolete 16-DIP analog switch because availability may be limited and factory-direct supply is not guaranteed. Include the exact MPN, required quantity, package form, target delivery date, and any traceable-manufacturing needs in the request.
What is the price and lead time of MAX381CPE+?
The current price, stock position, and production lead time for the MAX381CPE+ must be confirmed through the Request a Quote form on this page. The Maxim Integrated datasheet describes the electrical device but does not establish commercial availability for an obsolete part. Request the quantity break, authorized sourcing options, inspection requirements, and promised shipment date as part of the quotation request.
Is MAX381CPE+ currently active or obsolete?
The MAX381CPE+ is marked obsolete in the manufacturer-related product information shown for this part. According to the Maxim Integrated datasheet, it is a legacy precision, low-voltage analog switch originally offered in a 16-DIP package. For maintenance purchases, request traceability and inspection details; for new designs, favor an active device unless the obsolete part is unavoidable because of footprint and topology constraints.

工程参考数据: MAX381CPE+ ——对比、设计指导和合规信息。

选型指南

Choose the MAX381CPE+ when maintaining an existing circuit that requires the exact 16-DIP footprint, dual normally open SPST behavior, 3 V to 15 V operation, and approximately 35 Ω on-resistance. Its 500 mΩ channel matching and bipolar-operation capability are useful for balanced measurement and industrial control paths. Do not choose it for a new design without first comparing an active device because the MAX381CPE+ is obsolete and long-term availability may be restricted. The MAX381ESE+ is not a drop-in option because its narrow SOIC-16 package differs from the 16-DIP target. MAX383CPE+ and MAX385CPE+ provide different SPDT and DPDT topologies, respectively, so they require a signal-path review even when their voltage range is acceptable. Request a quotation for the exact obsolete MPN, package form, quantity, traceability, and inspection requirements.

与替代料对比

参数 本产品
Brand Maxim Integrated
Package 16-DIP, 0.300 inch pitch, 7.62 mm
Number of Circuits 2 circuits
Switch Configuration 1:1
Switch Type SPST, normally open
On-Resistance 35 Ω
Operating Supply Voltage 3 V to 15 V
Charge Injection 2 pC
Crosstalk -90 dB at 1 MHz
Channel Matching 500 mΩ
Off-State Channel Capacitance 12 pF
Operating Temperature Range 0 °C to 70 °C

关键差异点

  • Dual normally open SPST channels (对比 MAX381ESE+)
  • Matched dual-channel resistance (对比 MAX383CPE+)
  • Single- and bipolar-supply flexibility (对比 MAX385CPE+)
  • Through-hole legacy compatibility (对比 MAX381ESE+)

设计说明

Route switched analog signals directly between the MAX381CPE+ and their source and destination, keeping traces short and away from digital control lines. The specified 12 pF off-state channel capacitance makes board-level parasitics especially relevant in high-impedance designs. Place the IC near the connector or sensor interface, and provide a ground-return path that does not share switching-current paths with sensitive analog nodes.

Calculate switching disturbance from the specified 2 pC charge injection and the effective resistance presented by the source network. A higher source impedance increases the voltage step associated with injected charge, so a 2 pC specification may be unsuitable for demanding precision applications. Also evaluate the 35 Ω on-resistance against source and load impedance, plus the stated -90 dB crosstalk at 1 MHz when signals occupy nearby frequency bands.

Operate the MAX381CPE+ within its specified 3 V to 15 V supply range and confirm that the selected single-supply or bipolar configuration keeps every switched signal and control input within the absolute maximum limits. Add local supply bypassing close to the device using the capacitance recommended by the Maxim Integrated datasheet. Pay particular attention to supply sequencing in bipolar operation so control logic is never driven outside its valid input range.

Do not substitute the MAX381ESE+ as a direct replacement because it uses a narrow SOIC-16 package while the MAX381CPE+ uses a 16-DIP package. Verify the actual pin assignments, control polarity, switch state, and operating limits before using any related member of the MAX381/MAX383/MAX385 family. For maintenance production, request traceability and inspection information because the MAX381CPE+ is marked obsolete.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The accessible product information identifies the device as an obsolete Maxim Integrated analog switch but does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this legacy analog switch is not presented as an automotive-qualified device.

数据核验日期: 2026-11-14 ——数据由 XAIPART 元器件工程团队核验和整理

相关搜索

MAX381CPE+ datasheet MAX381CPE+ datasheet pdf MAX381CPE+ pinout MAX381CPE+ specifications MAX381CPE+ price MAX381CPE+ stock Maxim Integrated MAX381CPE+ MAX381CPE+ equivalent MAX381CPE+ replacement MAX381CPE+ cross reference MAX381CPE+ vs MAX381ESE+ MAX381CPE+ 16-DIP footprint MAX381CPE+ 35 ohm SPST MAX381CPE+ application circuit

相关元器件 & 术语

Maxim Integrated MAX381CPE+ MAX381ESE+ MAX383CPE+ MAX385CPE+ CMOS analog switch SPST switch normally open switch analog switch IC interface IC semiconductor on-resistance charge injection crosstalk channel matching off-state capacitance single-supply operation bipolar-supply operation rail-to-rail signal handling 16-DIP package through-hole package precision instrumentation automated test equipment industrial control signal routing
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情