MAX381CPE+ - Dual 35Ω SPST Analog Switch | Maxim Integrated
MPN: MAX381CPE+ ✗ Tapus ng BuhayMAX381CPE+ Ulas
A CMOS analog switch is an integrated semiconductor device that uses controlled transistors to connect or disconnect an analog signal path. The MAX381/MAX383/MAX385 family comprises precision, low-voltage switches for instrumentation, test equipment, control systems, and signal-routing applications. Within the broader semiconductor hierarchy, an analog switch belongs to the interface-IC category and provides a controllable connection between an input terminal and an output terminal.
The MAX381CPE+ contains two independent SPST, normally open switch circuits in a 1:1 configuration. Its specified 35 Ω on-resistance minimizes signal attenuation in moderate-impedance analog systems. The device also features matched channels, with a specified channel-to-channel on-resistance matching of 500 mΩ, helping preserve balance in differential or dual-channel signal paths.
Analog-signal performance includes charge injection of 2 pC, off-state channel capacitance of 12 pF, and crosstalk of -90 dB at 1 MHz. The MAX381 family supports both single-supply and bipolar-supply operation, allowing the switch to process signals referenced to ground or operate within positive and negative voltage rails. Its normally open configuration keeps the switched paths disconnected when the control state is inactive.
Typical uses include precision measurement front ends, automated test equipment, sensor signal routing, sample-and-hold circuits, and industrial control systems. The two integrated switches can route two related channels when matched behavior is useful, or independently route separate low-voltage signals. The 16-pin PDIP package also supports through-hole prototyping and legacy industrial equipment where surface-mount conversion would be inconvenient.
When laying out a design, place the IC close to the switched signal paths and keep analog traces short to minimize parasitic capacitance and interference. Treat the control inputs as logic signals while ensuring that every driven input remains within the device's specified supply-voltage limits. Verify signal amplitude, bandwidth, charge injection, and off-state leakage against the application before committing to a high-impedance instrumentation design.
This product page combines the MAX381CPE+ electrical characteristics, package details, lifecycle information, sourcing workflow, application guidance, and verified cross-reference analysis. It also distinguishes true pin-and-package drop-in options from related switches that use different packages or implement different circuit topologies.
Mga alternatibo na pwedeng ilagay na MAX381CPE+ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboMAX381CPE+ Mga Pinakamataas na Rating at Electrical Characteristics
| Number of Switch Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| Switch Type | SPST, normally open |
| On-Resistance | 35 Ω |
| Supply Voltage na Operasyon | 3 V to 15 V |
| Charge Injection | 2 pC |
| Crosstalk | -90 dB at 1 MHz |
| Channel-to-Channel On-Resistance Matching | 500 mΩ |
| Off-State Channel Capacitance | 12 pF |
| Hanay ng Temperature na Operasyon | 0 °C to 70 °C |
| Packhaging | 16-DIP, 0.300 inch pitch, 7.62 mm |
| Uri ng Pagpapasok | Through-hole |
| Supply Operation | Single-supply or bipolar-supply |
| Signal Handling | Rail-to-rail |
| Technology | CMOS |
Gabay sa Pin Configuration ng MAX381CPE+ 16-dip, 0.300 inch pitch, 7.62 mm
Pin configuration para sa MAX381CPE+ (16-dip, 0.300 inch pitch, 7.62 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa MAX381CPE+.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
MAX381CPE+ ay nararapat para sa 6 aplikasyons: Precision Measurement Front Ends, Automated Test Equipment, Sensor Signal Routing, Sample-and-Hold Signal Paths, Industrial Control Signal Routing, Laboratory Signal Switching.
Precision Measurement Front Ends
The MAX381CPE+ is appropriate for switching low-level sensor or instrument signals into a measurement chain because its 35 Ω on-resistance limits insertion loss in moderate-impedance paths and its two channels can process related inputs. According to the Maxim Integrated datasheet, channel-to-channel on-resistance matching is 500 mΩ, which helps preserve balance between paired measurements. Charge injection of 2 pC and off-state capacitance of 12 pF should be included in the error budget when the source impedance is high. The normally open SPST topology also provides a defined disconnected state between measurements.
Inirekomenda
Automated Test Equipment
The MAX381CPE+ can route test excitation or return signals in legacy automated test equipment where a dual, normally open analog switch is required. Its 35 Ω on-resistance provides a practical path for medium-impedance test networks, while -90 dB crosstalk at 1 MHz limits interaction between channels around the stated test condition. According to the Maxim Integrated datasheet, the device supports 3 V to 15 V operation, allowing use in compact low-voltage test systems. Designers should still account for 2 pC charge injection, 12 pF off-state capacitance, and the obsolete lifecycle status when planning production spares.
Inirekomenda
Sensor Signal Routing
The MAX381CPE+ fits legacy sensor interfaces that need to route one of two low-voltage signals into a shared amplifier or converter. The dual SPST structure permits independent control of the selected paths, and 35 Ω on-resistance is useful when the sensor and downstream circuitry form a moderate-impedance system. According to the Maxim Integrated datasheet, matched channels differ by 500 mΩ and the switch can handle signals from single or bipolar supplies. High-impedance sensors require an additional error analysis covering the specified 2 pC charge injection and 12 pF off-state channel capacitance.
Inirekomenda
Sample-and-Hold Signal Paths
The MAX381CPE+ can implement a normally open routing element in low-voltage sample-and-hold or signal-isolation arrangements. Its 35 Ω on-resistance reduces the resistance introduced into the sampled path, while the 2 pC charge-injection specification provides a concrete basis for calculating switching disturbance. According to the Maxim Integrated datasheet, the device supports rail-to-rail signal handling from single or bipolar supplies. The two channels can also support differential or complementary routing, provided the selected wiring preserves the required channel matching.
Inirekomenda
Industrial Control Signal Routing
The MAX381CPE+ is applicable to legacy industrial control systems that switch low-voltage command, reference, or feedback signals through a 3 V to 15 V control rail. The two normally open SPST channels provide independent connectivity and can be driven in a defined sequence by suitable control logic. According to the Maxim Integrated datasheet, the device offers 35 Ω on-resistance, rail-to-rail handling, and single- or bipolar-supply operation. Industrial deployments should check the specified 0 °C to 70 °C ambient range and plan long-term maintenance because the device is marked obsolete.
Inirekomenda
Laboratory Signal Switching
The MAX381CPE+ can serve in laboratory and educational instruments that need a compact, dual-channel low-voltage switch. Its 35 Ω on-resistance is practical for common source impedances, while the two matched channels help maintain balance in paired instruments. According to the Maxim Integrated datasheet, crosstalk is -90 dB at 1 MHz, off-state capacitance is 12 pF, and charge injection is 2 pC. The 16-DIP package simplifies through-hole construction, although a modern instrument design should compare these legacy characteristics with an active equivalent before committing the platform.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for MAX381CPE+ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | Maxim Integrated |
| Package | 16-DIP, 0.300 inch pitch, 7.62 mm |
| Number of Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| Switch Type | SPST, normally open |
| On-Resistance | 35 Ω |
| Operating Supply Voltage | 3 V to 15 V |
| Charge Injection | 2 pC |
| Crosstalk | -90 dB at 1 MHz |
| Channel Matching | 500 mΩ |
| Off-State Channel Capacitance | 12 pF |
| Operating Temperature Range | 0 °C to 70 °C |
Pangunahing mga Pagkakaiba
- Dual normally open SPST channels (kumpara saMAX381ESE+)
- Matched dual-channel resistance (kumpara saMAX383CPE+)
- Single- and bipolar-supply flexibility (kumpara saMAX385CPE+)
- Through-hole legacy compatibility (kumpara saMAX381ESE+)
Talaan ng Disenyo
Route switched analog signals directly between the MAX381CPE+ and their source and destination, keeping traces short and away from digital control lines. The specified 12 pF off-state channel capacitance makes board-level parasitics especially relevant in high-impedance designs. Place the IC near the connector or sensor interface, and provide a ground-return path that does not share switching-current paths with sensitive analog nodes.
Calculate switching disturbance from the specified 2 pC charge injection and the effective resistance presented by the source network. A higher source impedance increases the voltage step associated with injected charge, so a 2 pC specification may be unsuitable for demanding precision applications. Also evaluate the 35 Ω on-resistance against source and load impedance, plus the stated -90 dB crosstalk at 1 MHz when signals occupy nearby frequency bands.
Operate the MAX381CPE+ within its specified 3 V to 15 V supply range and confirm that the selected single-supply or bipolar configuration keeps every switched signal and control input within the absolute maximum limits. Add local supply bypassing close to the device using the capacitance recommended by the Maxim Integrated datasheet. Pay particular attention to supply sequencing in bipolar operation so control logic is never driven outside its valid input range.
Do not substitute the MAX381ESE+ as a direct replacement because it uses a narrow SOIC-16 package while the MAX381CPE+ uses a 16-DIP package. Verify the actual pin assignments, control polarity, switch state, and operating limits before using any related member of the MAX381/MAX383/MAX385 family. For maintenance production, request traceability and inspection information because the MAX381CPE+ is marked obsolete.
Impormasyon ng Pagsunod sa Kautusan
The accessible product information identifies the device as an obsolete Maxim Integrated analog switch but does not provide extractable RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 is not applicable because this legacy analog switch is not presented as an automotive-qualified device.