MC7448VS1400ND - MPC7448 PowerPC G4 MPU 1.4GHz | NXP
N.º de pieza: MC7448VS1400ND ⚠ Última compra| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $881.82 | $881,82 |
| 10 | $830 | $8.300,00 |
| 100 | $762.5 | $76.250,00 |
| 500 | $705 | $352.500,00 |
| 1.000 | $650 | $650.000,00 |
MC7448VS1400ND Descripción general
A microprocessor (MPU) is an integrated circuit that contains the CPU, cache, bus controller and memory management in a single package. The MC7448VS1400ND belongs to the broader PowerPC G4 family, itself a member of the Power Architecture instruction set lineage used in embedded computing, networking and aerospace systems. Within the system hierarchy, the MPU sits above peripherals and below the chassis/board level, providing general-purpose compute and SIMD acceleration to the host platform.
Key features include a 1.4 GHz clock frequency, 1.1 V core supply, a 360-pin FCCLGA ceramic package, 1 MB of on-die L2 cache with ECC support, hardware virtualization hints, and a 60x/MPX coherent bus for multiprocessor topologies. The MPC7448 silicon revision enables 21.3 Dhrystone 2.1 MIPS at 1.4 GHz and incorporates the AltiVec 128-bit vector unit for media and signal-processing workloads.
Typical applications span embedded routers, industrial imaging, defense/aerospace compute modules, single-board computers (SBC), and legacy PowerPC-based VME/cPCI cards where deterministic Power Architecture compute is required. The FCCLGA ceramic package supports the wide industrial and military temperature grades, making the part suitable for harsh-environment deployments.
When designing with this MPU, ensure the platform supplies a clean 1.1 V core rail with adequate decoupling and thermal management for a 21 W-class power envelope. Pair the device with a compatible northbridge and boot firmware that supports the 60x bus protocol; verify the FCCLGA land pattern matches the chosen PCB stackup. This page combines NXP manufacturer data, distributor inventory, drop-in same-family alternatives and practical design notes not present in the standalone datasheet.
Alternativas directas para MC7448VS1400ND — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC7448VS1400ND (mismo factor de forma y huella) — difiere en Mounting Type, Process Technology, RoHS Status, I/O Voltage, Maximum Clock Frequency.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MC7448THX1400ND
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC7448VU1000LD
✅ Sustitución directa✓ En stock
$225.9 / unidad
Ver hoja de datos →MC7447AVU1000LB
✅ Sustitución directa✓ En stock
$68.5 / unidad
Ver hoja de datos →MC7447AHX1000LB
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC7448VS1400ND Valores máximos y características eléctricas
| Processor Type | MPC74xx PowerPC 32-Bit |
| Core | PowerPC G4 |
| Number of Cores | 1 |
| Ancho del bus de datos | 32-bit |
| Frecuencia de reloj máxima | 1.4 GHz |
| Core Voltage (Vcc) | 1.1 V |
| Operating Temperature (MAX) | 105 C |
| L2 Cache Size | 1 MB |
| SIMD / Multimedia Engine | AltiVec (128-bit vector unit) |
| System Bus | MPX / 60x |
| Encapsulado / Carcasa | 360-FCCLGA (25 x 25 mm) |
| Tipo de montaje | Surface Mount (flip-chip land grid array) |
| Process Technology | 90 nm SOI |
| Packaging | Tray |
| Lead Free Status | Lead Free |
| Estado RoHS | RoHS Compliant |
| Series | MPC7448 |
Guía de configuración de pines de MC7448VS1400ND 360-fcclga (25 x 25 mm)
Configuración de pines para MC7448VS1400ND (encapsulado 360-fcclga (25 x 25 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MC7448VS1400ND.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MC7448VS1400ND es adecuado para 6 aplicacións: Embedded Networking Routers, Single-Board Computers (VME / cPCI), Industrial Imaging and Vision Systems, Defense and Aerospace Compute Modules, Medical Imaging Front-Ends, Industrial Automation Controllers.
Embedded Networking Routers
The MC7448VS1400ND fits embedded router line cards because its MPX/60x coherent bus integrates cleanly with MPC107/MPC8540-class northbridges, while the 1.4 GHz PowerPC G4 core delivers the headroom needed for packet-classification and forwarding pipelines. AltiVec accelerates bulk crypto and IPsec bulk transforms, offloading the CPU by 2-4x versus scalar code paths. The 360-FCCLGA ceramic substrate supports the long-life, NEBS-compliant thermal envelopes typical of central-office routers, where ambient temperatures near 70 C require an MPU rated to 105 C junction. Power is approximately 21 W at 1.4 GHz, so a copper heat spreader and 1 sq-in top-side copper pour are recommended for sustained throughput.
Recomendado
Single-Board Computers (VME / cPCI)
The MC7448VS1400ND is a well-suited SBC compute element because its 360-FCCLGA package and MPX bus map cleanly to the legacy VME64 and cPCI SBC layouts still used in defense and industrial automation. The 1.4 GHz speed grade and 1 MB L2 cache deliver the deterministic single-thread performance required for real-time control loops, while AltiVec accelerates DSP-style signal-conditioning kernels used in sonar, radar and machine-vision payloads. The 105 C junction rating covers the closed-chassis thermal environment of a typical 6U VME card; pairing the MPU with a discrete LDO for the 1.1 V core rail keeps the switching-noise floor below the part's analog PLL sensitivity.
Recomendado
Industrial Imaging and Vision Systems
The MC7448VS1400ND's AltiVec 128-bit SIMD engine makes it a strong fit for industrial imaging pipelines that perform per-pixel convolution, color-space conversion, and JPEG/MPEG encode in software. At 1.4 GHz the core sustains roughly 21.3 Dhrystone 2.1 MIPS, and AltiVec boosts image-processing kernels by 4-8x versus scalar execution, allowing line-scan cameras and X-ray imaging front-ends to hit 60 fps without a dedicated DSP. The 1 MB L2 cache absorbs frame-buffer stalls when the MPX bus is busy, and the 360-FCCLGA ceramic package tolerates the 24/7 thermal load of factory-floor vision enclosures where ambient temperatures fluctuate between 5 C and 55 C.
Recomendado
Defense and Aerospace Compute Modules
The MC7448VS1400ND is a proven fit for defense and aerospace programs that require PowerPC G4 compute in extended-environment modules, including avionics data concentrators and flight-test instrumentation. The FCCLGA ceramic substrate, lead-free RoHS finish, and 105 C junction rating match the mechanical and thermal envelopes of conduction-cooled CCIL/CCIL-style line-replaceable modules. The MPX bus enables deterministic dual-CPU configurations used in primary/standby flight-control pairs, and AltiVec supports sensor-fusion DSP without burdening the host. For high-altitude or naval applications, pair the part with a conformal-coated PCB stack and verify the FCCLGA solder column metallurgy against the program's tin-whisker mitigation plan.
Recomendado
Medical Imaging Front-Ends
The MC7448VS1400ND supports medical imaging front-ends such as MRI reconstruction pre-processors and CT scanner data acquisition boards, where the AltiVec engine accelerates back-projection kernels and per-voxel convolutions. The 1.4 GHz clock sustains real-time reconstruction for lower-resolution modalities without an FPGA or GPU coprocessor, simplifying FDA-510(k) qualification by reducing the bill of materials. The 1 MB L2 cache and MPX/60x coherent bus also support dual-MPU patient-monitoring topologies. Designers should still validate the deterministic interrupt latency for IEC 60601-1 compliant isolation boundaries and provide a redundant supervisory MCU for safety-class functions.
Recomendado
Industrial Automation Controllers
The MC7448VS1400ND fits industrial automation controllers running PowerPC-aware real-time operating systems, where the 1.4 GHz PowerPC G4 core and 1 MB L2 cache deliver the deterministic single-thread performance required for PLC scan loops and motion-control algorithms. The MPX/60x bus preserves the legacy MPC8260/MPC8349 software stack, easing migration from older controllers without re-validating firmware, while AltiVec accelerates floating-point trajectory planning. The 360-FCCLGA ceramic package is rated to 105 C and tolerates the vibration profile of a typical cabinet-mounted controller. Pair the MPU with isolated RS-485/Profibus transceivers and a watch-dog supervisor for IEC 61131-3 compliance.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC7448VS1400ND — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC7448THX1400ND | MC7448VU1000LD | MC7447AVU1000LB | MC7447AHX1000LB |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 360-FCCLGA (25x25) | 360-FCCLGA (25x25) - same | 360-FCCLGA (25x25) - same | 360-FCCBGA - same pin count | 360-FCCBGA - same pin count |
| Core / Family | PowerPC G4 (MPC7448) | PowerPC G4 (MPC7448) | PowerPC G4 (MPC7448) | PowerPC G4 (MPC7447A) | PowerPC G4 (MPC7447A) |
| Clock Frequency | 1.4 GHz | 1.4 GHz | 1.0 GHz | 1.0 GHz | 1.0 GHz |
| L2 Cache | 1 MB | 1 MB | 1 MB | 512 KB | 512 KB |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.3 V | 1.3 V |
| AltiVec Engine | Yes (128-bit) | Yes (128-bit) | Yes (128-bit) | Yes (128-bit) | Yes (128-bit) |
| Operating Temperature (MAX) | 105 C | 105 C | 105 C | 105 C | 105 C |
| Lifecycle Phase | Last Time Buy | Last Time Buy | Last Time Buy | Obsolete | Obsolete |
Diferenciadores clave
- Highest stock clock speed in the MPC7448 family at 1.4 GHz (frente a MC7448VU1000LD)
- 90 nm SOI process vs the older 0.13 micron process in the MPC7447A die (frente a MC7447AVU1000LB)
- 1 MB L2 cache versus 512 KB on the MPC7447A predecessors (frente a MC7447AHX1000LB)
Notas de diseño
The MC7448VS1400ND draws roughly 21 W from the 1.1 V core rail at 1.4 GHz. Use a low-impedance LDO or DC-DC converter with a 1% tolerance feedback divider and place at least six 10 uF X5R ceramic bulk capacitors around the FCCLGA perimeter to keep the core supply ripple below 30 mV pk-pk during AltiVec bursts. Verify the DC-DC current rating accounts for the worst-case 130% load-step transient caused by L2 cache line evictions.
The 360-FCCLGA ceramic package exposes the die through the top surface and is rated to 105 C junction. For sustained 1.4 GHz operation, attach a copper heat spreader with thermal interface material (TIM) and provide at least 1 square inch of top-side copper. Estimated: with theta_JA of approximately 12 C/W and a 21 W load, the junction rises about 252 C above ambient; therefore, adequate forced-air cooling or a conduction-cold-plate is mandatory for any deployment above 30 C ambient.
Route the MPX/60x bus as a controlled-impedance differential pair with 50 ohm single-ended / 100 ohm differential impedance, keep trace lengths matched within 25 mils, and place the MPC107 northbridge within 4 inches of the MPU. Provide matched-length address and data buses to avoid MPX bus hold-time violations; break out all 360 FCCLGA balls on a 1.0 mm pitch grid using 0.8 mm micro-vias, and reserve a continuous ground pour beneath the entire MPU footprint for return-current continuity.
Do not assume MPC7447 and MPC7448 firmware is binary-compatible - the MPC7448 silicon revision changes the L2 cache line-replacement policy and the AltiVec context-save opcode. Do not substitute a plastic BGA version of the MPC7448 (if any exist) without re-qualifying the thermal profile, because the FCCLGA ceramic substrate has a much lower theta_JC than a plastic BGA. Finally, verify the part-number suffix matches your temperature grade: 'VS' denotes 0 C to 105 C, while 'THX' denotes -40 C to 105 C.
Información de cumplimiento
RoHS and lead-free status confirmed by DigiKey and Mouser product listings. REACH, halogen-free and conflict-minerals statements were not present in the verified web data and are marked 'unknown'.
