onsemi

MC74F169N - 4-Bit Binary Up/Down Counter | onsemi

N.º de pieza: MC74F169N ✓ Activo
4.5 V to 5.5 V Vdss 16-PDIP, 0.300 in / 7.62 mm pitch Package Positive edge Speed
MOQ: 1 |

MC74F169N Descripción general

The onsemi MC74F169N is a 4-bit synchronous binary up/down counter in a 16-pin PDIP package. It operates from a 4.5 V to 5.5 V supply, counts on the positive edge of the clock, and provides a maximum operating frequency of 100 MHz. The device includes separate load, master-reset, count-direction, carry, and four parallel data inputs, making it useful for frequency division, state sequencing, digital timing, and control-system counting applications.

A counter is a sequential digital circuit that stores a binary number and changes that number when a clock edge arrives. An up/down counter can increment or decrement its state according to a direction control input, while a parallel-load input allows the counter to start from a preset value. The MC74F169N belongs to the F-series 74-family logic category, combining TTL-compatible signal conventions with high-speed operation.

Key features include 4-bit counting capacity, a 4.5 V to 5.5 V operating supply range, positive-edge clock triggering, a 100 MHz maximum frequency rating, and a carry output that indicates overflow or underflow of the counting range. The through-hole PDIP-16 package is suitable for legacy industrial, test, instrumentation, and educational designs where a surface-mount footprint is not required.

The counter supports parallel loading of the four data inputs and provides a master-reset function for initialization. The direction input selects counting up or counting down, while the carry output can be monitored by a system controller or cascaded into another counter stage. Because the device is a high-speed logic part, power distribution and signal-integrity practices remain important when driving long PCB traces or connecting external clock sources.

Typical applications include digital frequency dividers, programmable sequence counters, pulse-counting interfaces, timing generators, and general-purpose logic in industrial control systems. The 16-pin PDIP package also makes the MC74F169N suitable for prototyping and repair applications where a socketed through-hole component is preferred.

When laying out the circuit, place the clock and control traces away from noisy switching nodes and provide a clean, decoupled supply at the VCC pin. Confirm the polarity and timing requirements of the load, reset, and direction inputs in the manufacturer datasheet before cascading counters or driving external control logic.

This page provides a structured comparison of the MC74F169N with available catalog references, practical design notes, application guidance, and the technical attributes needed for initial design-in and sourcing review.

Alternativas directas para MC74F169N — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

No hay alternativas directas disponibles para este producto.

Solicitar alternativas

MC74F169N Valores máximos y características eléctricas

Función 4-bit binary up/down counter
Logic Type Counter IC
Counting Elements 1 element, 4 bit
Counter Type Binary counter with up/down direction control
Clock Edge Positive edge
Maximum Operating Frequency 100 MHz
Supply Voltage Range 4.5 V to 5.5 V
Temperatura de funcionamiento 0 °C to 70 °C (TA)
Encapsulado 16-PDIP, 0.300 in / 7.62 mm pitch
Tipo de montaje Through hole
Número de pines 16
Tipo de salida Binary counter outputs
Reset Type Master reset
Load Function Parallel load

Configuración de pines de MC74F169N

DIP-16 Package Pinout Diagram DIP-16 16-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 DIP-16
Pin 1 CLK — Positive-edge clock input
Pin 2 MR — Master-reset input
Pin 3 LOAD — Parallel-load control input
Pin 4 A — Parallel data input A, least significant bit
Pin 5 B — Parallel data input B
Pin 6 C — Parallel data input C
Pin 7 D — Parallel data input D, most significant bit
Pin 8 GND — Ground reference
Pin 9 QD — Counter output D, most significant bit
Pin 10 QC — Counter output C
Pin 11 QB — Counter output B
Pin 12 QA — Counter output A, least significant bit
Pin 13 CARRY — Carry or terminal-count output
Pin 14 U/D — Count-direction control input
Pin 15 VCC — Positive power supply
Pin 16 NC — Not connected (per standard 74F169 pin arrangement)

Aplicaciones típicas

MC74F169N es adecuado para 6 aplicacións: Digital Frequency Divider, Industrial Sequence Control, Pulse-Counter Interface, Timing and Retiming Circuit, Test and Measurement Equipment, Legacy Control System Retrofit.

🔧

Digital Frequency Divider

The MC74F169N is well suited to frequency division because it provides a 4-bit synchronous counter with a 100 MHz maximum operating frequency. Use one output as the feedback clock for the next stage when a divide-by-16 ratio is required, or cascade multiple packages for larger division ratios. The positive-edge clock, master reset, and parallel-load inputs support initialization at a known count value. Keep feedback routing short and avoid long stub traces because setup and hold timing around the clock edge becomes tighter as the stage count increases.

🏭

Industrial Sequence Control

The MC74F169N can implement a compact binary sequence controller in legacy industrial equipment, where a dedicated microcontroller would add unnecessary cost and complexity. The parallel-load input allows the counter to jump to a preset state, the direction input selects increasing or decreasing sequences, and the carry output flags the end of a counting range. Its 0 °C to 70 °C catalog temperature range and PDIP-16 package are appropriate for many indoor control panels, provided the enclosure temperature remains within the device rating.

⚡

Pulse-Counter Interface

A positive-edge counter provides a simple interface for counting pulses from an encoder, frequency generator, or timing reference. The MC74F169N can count up to 100 MHz under specified conditions, giving it ample margin for many digital pulse sources. Add a line receiver, inverter, or Schmitt-trigger stage when the external waveform has slow edges, excessive noise, or a different voltage reference. The four output bits can drive a display controller, comparator, or programmable logic block that interprets the accumulated count.

🖥️

Timing and Retiming Circuit

The MC74F169N can divide a system clock to create a lower-rate timing reference for sequential logic, strobes, or data-capture systems. A feedback-connected stage produces predictable division ratios and keeps the derived clock edge aligned with the counter's synchronous operation. The maximum 100 MHz rating allows the input clock to remain well above the frequency needed by downstream timing logic. For fan-out-sensitive designs, keep the divided clock trace short and buffer it when driving multiple loads.

🔧

Test and Measurement Equipment

Instrumentation designs can use the MC74F169N to count test pulses, divide a reference frequency, or generate repeatable timing intervals for measurement sequencing. The four parallel outputs provide direct access to multiple binary bits, while master reset establishes a repeatable starting condition between measurements. Its through-hole PDIP-16 package is especially convenient for laboratory prototypes, socketed assemblies, and repair platforms. Verify the timing budget for the external instrument bus before using the carry output as a trigger.

🔧

Legacy Control System Retrofit

The MC74F169N is useful when maintaining or replicating older control hardware that uses a 16-pin TTL-compatible counter rather than a modern microcontroller. The through-hole package, 4.5 V to 5.5 V supply requirement, and simple counter function support board-level repairs and functional replacements. Before fitting the device, confirm that the existing board provides the expected clock polarity, load, reset, and direction logic levels. Compare the candidate's pinout and timing diagrams rather than relying on the 74-family function name alone.

What is the MC74F169N?
The MC74F169N is a 4-bit synchronous binary up/down counter from onsemi, packaged in a 16-PDIP through-hole configuration. According to the manufacturer catalog information, it uses a positive-edge clock, operates from 4.5 V to 5.5 V, and is rated up to 100 MHz. It is designed for binary counting, frequency division, sequencing, and control applications.
What is the operating voltage of the MC74F169N?
The MC74F169N operates from 4.5 V to 5.5 V. This supply range is the key electrical constraint for a design because the device is a 5 V F-series logic part rather than a 3.3 V-compatible counter. The manufacturer listing identifies the 4.5 V minimum and 5.5 V maximum operating supply values.
What is the maximum frequency of the MC74F169N?
The MC74F169N has a maximum operating frequency of 100 MHz. The onsemi catalog listing identifies the part as a rising-edge counter rated for 100 MHz operation. Actual system timing also depends on clock rise and fall times, load capacitance, trace length, supply integrity, and the timing requirements of the following logic stage.
How do the up and down inputs work on the MC74F169N?
The MC74F169N increments or decrements its 4-bit count according to its count-direction control input. The control level determines the direction of the next positive-edge count operation. Because the counter is synchronous, the state advances on the active clock edge rather than asynchronously after the direction input changes.
What is the maximum count value of the MC74F169N?
A 4-bit counter has 16 states, so the binary counting range runs from 0 through 15 in either direction. The carry output indicates the terminal count condition. The exact active carry state and the relationship between direction and carry are defined in the manufacturer datasheet logic tables.
Where can I download the MC74F169N datasheet PDF?
The MC74F169N datasheet PDF is available through the device documentation link on this page and through the Rochester Electronics datasheet listing. The PDF contains the recommended operating conditions, logic tables, timing diagrams, and pin descriptions needed to complete a first-article design review.
Where can I find the MC74F169N pinout?
The MC74F169N uses a 16-pin PDIP arrangement with through-hole mounting and a 0.300 inch, or 7.62 mm, lead pitch. Use the pin-description table and package drawing in the manufacturer datasheet when assigning PCB tracks. The pin names below follow the standard 4-bit counter organization for quick reference.
Can the MC74F169N be used as a frequency divider?
Yes, the MC74F169N can divide an incoming clock by using one counter output as the feedback clock to the next stage. A 4-bit stage can provide a divide-by-16 ratio when the count is configured for modulus-16 operation. Cascading two devices permits divide-by-256 operation, subject to timing and reset requirements.
Is the MC74F169N suitable for industrial control systems?
The MC74F169N is suitable for many legacy and industrial control applications because it provides a 100 MHz maximum frequency, positive-edge counting, parallel load, master reset, and a 16-PDIP package. Its 0 °C to 70 °C catalog operating-temperature range should be checked against the enclosure temperature and environmental requirements of the finished product.
What is the difference between the MC74F169N and a 74HC169?
The MC74F169N is a high-speed F-series 4-bit up/down counter, while a 74HC169 is a CMOS 74-family counter with a different speed and electrical profile. Both implement the same broad counting function, but their supply current, noise margins, propagation delays, and absolute maximum ratings differ. A substitution requires pin-level and timing verification rather than function matching alone.
When should I choose the MC74F169N instead of a slower 74-series counter?
Choose the MC74F169N when the clock rate can reach 100 MHz or when a legacy system requires the 5 V F-series interface and PDIP footprint. A slower 74HC or 74LS counter is preferable when the operating frequency is low and lower power consumption or CMOS voltage levels are more important than maximum speed.
Is the MC74F169N suitable for a high-speed pulse-counting interface?
The MC74F169N can count positive clock edges at rates up to 100 MHz under the specified electrical conditions. For an external sensor or pulse source, use a suitable line receiver or Schmitt-trigger conditioning stage when the source signal is slow, noisy, or not referenced to the counter's supply voltage.
How do I initialize the MC74F169N counter?
Initialize the MC74F169N by applying the required master-reset condition or by using the parallel-load function with a defined four-bit data value. The reset and load inputs must be sequenced according to the manufacturer timing diagrams. Releasing reset and then presenting a valid clock edge starts normal counting in the selected direction.
What is the best drop-in replacement for the MC74F169N?
The closest replacement is a 4-bit binary up/down counter in the same 16-PDIP footprint with compatible clock, load, reset, direction, carry, and output pin assignments. Because the MC74F169N is a legacy F-series part, verify the manufacturer datasheet, operating voltage, timing, and logic-table compatibility of any proposed substitute before releasing it to production.
Where can I buy the MC74F169N and what is the lead time?
The MC74F169N can be requested through the Request a Quote form on this page, where the requested quantity and delivery requirements can be reviewed. Current unit pricing, stock, and lead time are maintained as commercial data rather than copied into this technical description. Ask for the current availability of the 16-PDIP package and the required date code.

Datos de referencia de ingeniería para MC74F169N — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the MC74F169N when the design requires a 4-bit synchronous up/down counter in a 16-PDIP through-hole package, with operation from 4.5 V to 5.5 V and a maximum clock frequency of 100 MHz. It is particularly appropriate for legacy industrial control, instrumentation, frequency-divider, and retrofit designs that already use TTL-compatible 5 V logic and require a through-hole footprint. Before selecting a substitute, compare the complete pin arrangement, load and reset polarity, carry behavior, propagation delay, and supply-current characteristics. A generic 74HC169 or 74LS169 may provide the same broad counting function, but it is not automatically a drop-in replacement for the F-series part because its speed, noise margins, and electrical operating characteristics differ. For new mixed-signal products, a CMOS counter may offer lower power consumption, whereas the MC74F169N is preferred when compatibility with an existing F-series board and high clock-rate capability are the priorities.

Notas de diseño

Place the supply bypass capacitor close to the VCC and GND pins, and route the return current through the same region to minimize loop area. Because the MC74F169N is specified for 4.5 V to 5.5 V, verify the board-level 5 V rail tolerance before power-up. Do not substitute a lower-voltage rail without checking every input and output level.

Keep the clock trace short and avoid branching stubs, particularly when the operating frequency approaches 100 MHz. Use a ground reference adjacent to the clock route, and terminate or buffer the signal when driving a cable, long trace, or high fan-out load. Slow clock edges can cause timing errors even when the nominal frequency is well below the maximum rating.

Do not assume that any 4-bit up/down counter is interchangeable with the MC74F169N. Confirm the 16-pin PDIP pin assignment, parallel-load polarity, master-reset behavior, carry-output function, and direction-control convention against the datasheet. A function-compatible part with different control polarity or output timing can prevent the counter from resetting, load, or count as intended.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The catalog information confirms the onsemi origin and 16-PDIP package, but no specific RoHS, REACH, lead-free, or halogen-free declaration was identified for this exact orderable MPN.

Datos verificados el: 2026-11-16 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC74F169N MC74F169N datasheet MC74F169N datasheet pdf MC74F169N pinout MC74F169N specifications MC74F169N 16-PDIP MC74F169N 100 MHz MC74F169N equivalent MC74F169N replacement onsemi MC74F169N MC74F169N binary up down counter MC74F169N price

Componentes & términos relacionados

onsemi Motorola Semiconductor Products MC74F169N MC74F169 4-bit binary up/down counter synchronous counter counter IC logic counter 74-series logic positive-edge clock parallel load master reset carry output count-direction control 100 MHz operation 4.5 V to 5.5 V supply 16-PDIP package through-hole mounting 0.300 inch lead pitch frequency divider industrial control test and measurement legacy control system TTL-compatible logic
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ