Renesas Electronics

R5F10BMGLFB#V5 - 16-Bit 128KB Flash MCU | Renesas

N.º de pieza: R5F10BMGLFB#V5 ✓ Activo
3.3 V or 5 V Vdss 80-pin LQFP Package 128 KB Memory
MOQ: 1 |

R5F10BMGLFB#V5 Descripción general

The Renesas Electronics R5F10BMGLFB#V5 is a 16-bit RL78/F13 microcontroller with 128KB of flash memory, 3.3V and 5V operation, and an 80-pin LQFP package. The device is positioned for compact embedded systems requiring automotive-oriented communication, low power consumption, and functional-safety features. Its RL78 architecture combines a low-power design with integrated CAN and LIN interface support for vehicle body, comfort, and electronic-control systems.

An RL78 microcontroller is a 16-bit reduced-instruction-set microcontroller designed for embedded control. Within the product hierarchy, it belongs to the microcontroller, embedded processor, and semiconductor categories. Renesas positions the RL78/F13 family as a successor to the 78K0R and R8C families, with devices offered from 20 to 80 pins and 16KB to 128KB of flash. This makes the family suitable for systems that need deterministic peripheral control, low standby current, and automotive communication interfaces in one device.

The R5F10BMGLFB family configuration provides 128KB flash, integrated CAN, integrated LIN, RAM error-correction capability, a PLL lock function, port-output-state monitoring, and stack monitoring. These features support designs where firmware integrity and communication reliability matter, particularly in body electronics and automotive auxiliary-control modules. The 3.3V and 5V operating points also permit integration with conventional automotive and industrial logic ecosystems.

The device uses a compact 16-bit core rather than a 32-bit processor, keeping code density and processing requirements appropriate for dedicated controllers. Communication peripherals can handle bus traffic without requiring separate protocol controllers, while the PLL supports systems that need a controlled clock source for timers, serial interfaces, or higher-rate communication. Functional-safety diagnostics help designers identify memory and peripheral faults before they become system-level failures.

Typical uses include CAN and LIN gateway controllers, body-control modules, door and locking systems, climate-control interfaces, motor auxiliaries, sensor concentrators, and automotive HVAC controls. The low-power emphasis is valuable in battery-powered or duty-cycled installations where long standby periods are common. A 16-bit architecture is also well suited to real-time tasks that monitor switches, sensors, and actuators without requiring a high-performance application processor.

Designers should confirm the exact pin assignment, peripheral channel allocation, electrical limits, and startup behavior against the R5F10BMG datasheet before releasing a PCB. Automotive production programs should also review qualification requirements, traceability, flash-programming procedures, and hardware validation criteria. The package drawing and pin table must be treated as authoritative because peripheral functions can vary across family members and ordering codes.

This product record combines the RL78/F13 family architecture, verified distributor references, package considerations, and drop-in replacement guidance into one engineering-focused view. It highlights how flash capacity, communication peripherals, low-power operation, and safety diagnostics influence MCU selection for embedded automotive and industrial control designs.

Alternativas directas para R5F10BMGLFB#V5 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

R5F10BMGLFB#X5

✅ Sustitución directa
📦 80-pin LQFP
Same R5F10BMGLFB 128KB-flash device basis and 80-pin LQFP footprint; ordering suffix changes the documented automotive configuration by 0% in core capacity.

📋 Alternativa de referencia (no en el catálogo)

R5F10BMGLFB#V5Q

✅ Sustitución directa
📦 80-pin LQFP
Same 16-bit RL78/F13 architecture, 128KB flash, and 80-pin LQFP package; the Q suffix identifies a distinct ordering or qualification condition.

📋 Alternativa de referencia (no en el catálogo)

R5F10BMGLFB#X5Q

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 80-pin LQFP
Same R5F10BMGLFB device basis and 128KB flash; suffix selection changes ordering or qualification conditions without changing core memory capacity.

📋 Alternativa de referencia (no en el catálogo)

R5F10BMGLFB#G5

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 80-pin LQFP
Same 80-pin RL78/F13 package and 128KB-flash configuration; suffix-specific grade or qualification must be confirmed before substitution.

📋 Alternativa de referencia (no en el catálogo)

R5F10BMG

✅ Sustitución directa
📦 80-pin LQFP
Base R5F10BMG device with the same 128KB-flash RL78/F13 architecture and 80-pin LQFP footprint; ordering suffix must be assigned for the required grade.

📋 Alternativa de referencia (no en el catálogo)

R5F10BMGLFB#V5 Valores máximos y características eléctricas

Product Type 16-bit RL78/F13 microcontroller
Flash Memory 128 KB
Core Architecture 16-bit RL78 core
Tensión de alimentación 3.3 V or 5 V
Encapsulado 80-pin LQFP
CAN Interface Integrated CAN module
LIN Interface Integrated LIN module
RAM ECC Supported
PLL Lock Function Supported
Port Output State Monitoring Supported
Stack Monitoring Supported
Family Flash Range 16 KB to 128 KB
Family Pin Count Range 20 to 80 pins

Guía de configuración de pines de R5F10BMGLFB#V5 80-pin lqfp

Configuración de pines para R5F10BMGLFB#V5 (encapsulado 80-pin lqfp). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 80-pin lqfp para R5F10BMGLFB#V5

No hay datos detallados de patillaje disponibles para R5F10BMGLFB#V5.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

R5F10BMGLFB#V5 es adecuado para 6 aplicacións: Automotive CAN and LIN Gateway, Body Control Module, Automotive HVAC Control, Door and Locking Controller, Industrial Sensor Concentrator, Low-Power Actuator Node.

🚗

Automotive CAN and LIN Gateway

The R5F10BMGLFB#V5 fits an automotive communication gateway because it combines a 16-bit RL78/F13 core, 128KB flash, an integrated CAN module, and an integrated LIN module in an 80-pin LQFP package. A gateway can use CAN for vehicle-network traffic and LIN for lower-cost body peripherals without adding separate bus controllers. RAM ECC, PLL-lock detection, port-output-state monitoring, and stack monitoring improve diagnostic coverage for communication nodes that must remain available after a transient fault. The 128KB flash also provides room for protocol conversion, message filtering, diagnostics, and application firmware. Before layout release, verify the exact CAN and LIN channel assignments, alternate-function pins, transceiver requirements, and termination strategy against the R5F10BMG datasheet and the chosen bus topology.

🚗

Body Control Module

The R5F10BMGLFB#V5 is suitable for a body-control module that coordinates switches, locks, lamps, and auxiliary loads. Its 16-bit architecture supports responsive state-machine and debounce tasks without the memory overhead of a larger processor, while 128KB flash accommodates application logic, diagnostics, and communication handlers. Integrated CAN and LIN allow the module to bridge vehicle network segments and connect inexpensive sensors or actuators. The integrated monitoring functions support designs in which unexpected port behavior, stack faults, or PLL-lock loss must be reported. The 80-pin LQFP provides enough I/O density for input conditioning and actuator outputs, subject to the exact pin-multiplexing map. Firmware designers should also implement debounce, output default states, watchdog servicing, and diagnostic reporting for every externally controlled circuit.

🏭

Automotive HVAC Control

The R5F10BMGLFB#V5 can serve as the control MCU for an automotive climate-control module because it combines low-power RL78/F13 operation with 128KB flash and both CAN and LIN interfaces. The MCU can acquire switch and temperature-sensor inputs, drive fan or valve outputs, and communicate status through the vehicle network. Its 16-bit core is well matched to discrete control loops, timers, and state management rather than graphics or high-bandwidth processing. RAM ECC and PLL-lock monitoring add useful integrity checks where reliable actuator control and stable clocking are important. Use the MCU in a duty-cycled architecture when low standby consumption is required, but confirm the exact active and sleep currents before finalizing the power budget. Pin assignments, ADC channels, timer outputs, and wake-up behavior must be verified in the manufacturer documentation.

🔒

Door and Locking Controller

The R5F10BMGLFB#V5 is a practical controller for an automotive door, latch, or centralized locking module. The integrated LIN interface can communicate with distributed door modules, while CAN supports vehicle-level status reporting and diagnostics. Its 128KB flash is sufficient for event logging, debounce logic, actuator timing, and communication firmware, while the 16-bit core supports deterministic task execution. Port-output-state monitoring is particularly relevant when the firmware must verify that an external latch or relay command reached its intended state. The controller can operate from 3.3V or 5V logic, allowing integration with compatible vehicle electrical systems when the required transceiver and protection components are selected. Engineering validation should cover reverse-battery exposure, transient pulses, stuck-output detection, wake-up behavior, and the operating-temperature requirement of the exact ordering code.

🏭

Industrial Sensor Concentrator

The R5F10BMGLFB#V5 can be used in an industrial sensor concentrator that gathers inputs from mixed communication peripherals and reports their status to a higher-level controller. The 16-bit RL78/F13 core handles protocol servicing and local filtering, and the 128KB flash provides room for calibration tables, diagnostics, and firmware updates. CAN and LIN support industrial CAN equipment and LIN-compatible sensors where those buses are appropriate. Although the family originated with automotive and low-power applications, its communication density and monitoring features also suit compact embedded controllers outside a vehicle. The 3.3V and 5V operating points simplify interface planning with appropriately rated transceivers. The final design must verify clock accuracy, communication timing, input thresholds, and power-supply tolerance; the MCU alone does not provide bus-line protection or transceiver biasing.

⚡

Low-Power Actuator Node

The R5F10BMGLFB#V5 is suitable for a dedicated low-power actuator node where the controller periodically reads sensors, drives a motor or valve, and then returns to a low-consumption state. The RL78/F13 family's low-consumption emphasis is advantageous in battery-operated or intermittently powered installations, while 128KB flash leaves room for control algorithms and diagnostics. CAN or LIN communication lets the node participate in a distributed architecture without using a higher-cost communications processor. The 80-pin LQFP can accommodate the necessary digital I/O, timers, and serial functions, subject to the device's multiplexing limitations. Firmware should use the lowest acceptable clock and peripheral configuration during idle periods, validate wake sources, and preserve output states safely across sleep transitions. Actual battery-life calculations require the exact sleep current, wake-up time, and active duty cycle from the datasheet.

Resumen de productos recomendados

R5F10BMGLFB#X5 Same-family RL78/F13 communication controller variant Se usa en: Automotive CAN and LIN Gateway, Body Control Module, Automotive HVAC Control, Door and Locking Controller, Industrial Sensor Concentrator, Low-Power Actuator Node TJA1057GTK/3Z NXP Semiconductors Se usa en: Automotive CAN and LIN Gateway, Industrial Sensor Concentrator R5F10BMGLFB#V5Q Same-package ordering variant for qualification review Se usa en: Body Control Module, Automotive HVAC Control, Door and Locking Controller, Low-Power Actuator Node
What is the Renesas R5F10BMGLFB#V5 microcontroller?
The Renesas Electronics R5F10BMGLFB#V5 is a 16-bit RL78/F13 microcontroller with 128KB flash, 3.3V and 5V operation, and an 80-pin LQFP package. It integrates CAN and LIN communications plus RAM ECC, PLL-lock detection, port-output monitoring, and stack monitoring. These capabilities make it appropriate for compact embedded controllers, including automotive body electronics, gateway modules, and low-power actuator controllers.
Where can I download the R5F10BMGLFB#V5 datasheet PDF?
The R5F10BMG family datasheet is available through the datasheet PDF linked on this page, while the Renesas RL78/F13 family product page documents the related R5F10BMGLFB#X5 ordering code. The manufacturer datasheet contains the authoritative package drawing, pin descriptions, electrical characteristics, peripheral allocation, and application guidance. Engineers should use the R5F10BMG document together with the exact ordering-code information before assigning PCB nets.
Where can I find the R5F10BMGLFB#V5 pinout?
The R5F10BMGLFB#V5 pinout must be taken from the R5F10BMG family pin-description table because no verified standalone pin list is available on this page. The device uses an 80-pin LQFP package. Check each multiplexed peripheral function, supply pin, ground pin, reset connection, and programming interface directly against the manufacturer diagram before fabrication.
What are the key specifications of R5F10BMGLFB#V5 that engineers should know?
The principal R5F10BMGLFB#V5 specifications are a 16-bit RL78 core, 128KB flash, 3.3V and 5V operation, 80-pin LQFP packaging, and integrated CAN and LIN interfaces. The RL78/F13 family also provides RAM ECC, PLL-lock detection, port-output-state monitoring, and stack monitoring. Exact RAM capacity, CPU frequency, current consumption, and temperature limits should be confirmed in the manufacturer datasheet.
Can R5F10BMGLFB#V5 be used in automotive communication systems?
Yes, the R5F10BMGLFB#V5 is suitable for automotive communication systems that use 3.3V or 5V logic and require integrated CAN and LIN controllers. Its functional-safety diagnostics include RAM ECC, PLL-lock monitoring, port-output-state monitoring, and stack monitoring. Qualification, temperature grade, and exact ordering-code requirements must be checked for the target vehicle platform.
R5F10BMGLFB#V5 vs R5F10BMGLFB#X5 - which is better for an automotive design?
The R5F10BMGLFB#X5 is explicitly identified by Renesas as an automotive RL78/F13 ordering code, while the R5F10BMGLFB#V5 also appears in automotive MCU listings. Both use the same R5F10BMGLFB device basis, but the final character selects the applicable ordering, qualification, or temperature configuration. The R5F10BMGLFB#X5 is the stronger initial candidate when the automotive order code is explicitly required; the V5 variant should be selected only after its qualification status is confirmed.
When should I choose R5F10BMGLFB#V5 over another RL78/F13 controller?
Choose the R5F10BMGLFB#V5 when a design needs an 80-pin package, 128KB flash, 3.3V or 5V operation, and integrated CAN and LIN interfaces in one MCU. It is also useful where RAM ECC, PLL-lock detection, output-state monitoring, and stack monitoring support the required diagnostics. A lower-pin or lower-flash family member may be preferable when those resources exceed the system requirements.
Is R5F10BMGLFB#V5 suitable for a low-power sensor controller?
The R5F10BMGLFB#V5 can fit low-power sensor-controller designs because the RL78/F13 family emphasizes low consumption and supports a broad operating-voltage range. Its 128KB flash is useful for local filtering, calibration, diagnostics, and communication firmware. Actual suitability depends on the exact active and standby currents, which must be checked for the selected voltage, frequency, and peripheral configuration.
What is the best drop-in replacement for R5F10BMGLFB#V5?
The closest documented drop-in candidates are ordering-code variants of the same R5F10BMGLFB device family, including R5F10BMGLFB#X5 and R5F10BMGLFB#V5Q. They retain the 80-pin LQFP footprint and the same 16-bit RL78/F13, 128KB-flash architecture. A replacement is appropriate only after the temperature grade, qualification status, pin functions, and automotive ordering requirements have been checked against the original design.
Can R5F10BMGLFB#X5 replace R5F10BMGLFB#V5?
The R5F10BMGLFB#X5 can be a pin-compatible replacement for the R5F10BMGLFB#V5 because both use the R5F10BMGLFB 80-pin LQFP device basis and the same 128KB-flash RL78/F13 architecture. The ordering suffix may indicate a different automotive or temperature configuration, so replacement should be conditioned on an approved supplier-quality review. Verify the exact suffix meaning with Renesas before production use.
What can replace R5F10BMGLFB#V5 on the same PCB?
A same-PCB replacement should use an R5F10BMGLFB ordering-code variant with the same 80-pin LQFP footprint, 16-bit core, 128KB flash, CAN and LIN peripherals, and electrical limits. R5F10BMGLFB#X5 and R5F10BMGLFB#V5Q are the closest documented options. Do not substitute a 64-pin R5F10BLGLFB device because its package and pin arrangement differ even though it belongs to the same broad family.
Is R5F10BMGLFB#V5 the same as R5F10BMGLFB#X5?
The R5F10BMGLFB#V5 and R5F10BMGLFB#X5 share the same base R5F10BMGLFB device and 80-pin LQFP package, including 128KB flash and integrated CAN and LIN interfaces. They are not necessarily identical commercial order codes because the suffix can select automotive, temperature, qualification, or packaging requirements. Treat them as compatible alternatives only after confirming the suffix-specific requirements.
Where can I buy R5F10BMGLFB#V5 online?
Use the Request a Quote form on this page to request the R5F10BMGLFB#V5, current availability, and a quotation for the required quantity. The form is the appropriate route for sourcing because component supply and commercial terms can change quickly. Engineers should specify the exact MPN, reel quantity, and any required automotive qualification or traceability documentation.
What is the lead time for R5F10BMGLFB#V5?
The current lead time for R5F10BMGLFB#V5 should be requested through the Request a Quote form on this page. Lead time can vary with order quantity, factory schedule, packaging, and traceability requirements. For automotive or production programs, include the requested delivery schedule and quality-document requirements in the quotation request.
Is R5F10BMGLFB#V5 currently in stock?
Current inventory for R5F10BMGLFB#V5 should be confirmed through the Request a Quote form on this page rather than inferred from an indexed listing. A listing headline alone does not establish the quantity available at the time of order. Specify the required reel quantity and authorized sourcing conditions so the quotation can confirm allocation and expected shipment timing.

Datos de referencia de ingeniería para R5F10BMGLFB#V5 — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose the R5F10BMGLFB#V5 when the design needs a 16-bit RL78/F13 controller with 128KB flash, 3.3V and 5V operation, an 80-pin LQFP footprint, and integrated CAN and LIN interfaces. It is especially attractive for automotive body, HVAC, door-locking, gateway, and actuator-control systems where low-power behavior and built-in diagnostics are important. Select the #X5 ordering code when its explicitly documented automotive configuration matches the vehicle-program requirement, and evaluate #V5Q when that qualification status is preferred. The R5F10BMG base designation is useful during cross-reference work but requires the correct production suffix. Do not choose the R5F10BLGLFB#V5 as a direct replacement because its 64-pin package does not match the target footprint. For every alternative, confirm the suffix-specific temperature, qualification, flash-programming, and traceability requirements before release.

Comparación con alternativas

Parámetro Este producto R5F10BMGLFB#X5 R5F10BMGLFB#V5Q R5F10BMGLFB#X5Q R5F10BMGLFB#G5 R5F10BMG
Package 80-pin LQFP 80-pin LQFP 80-pin LQFP 80-pin LQFP 80-pin LQFP 80-pin LQFP base device
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Series RL78/F13 RL78/F13 RL78/F13 RL78/F13 RL78/F13 RL78/F13
CPU Architecture 16-bit 16-bit 16-bit 16-bit 16-bit 16-bit
Flash Memory 128 KB 128 KB 128 KB 128 KB 128 KB 128 KB
Operating Voltage 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V 3.3 V or 5 V
CAN Interface Integrated Integrated Integrated Integrated Integrated Integrated
LIN Interface Integrated Integrated Integrated Integrated Integrated Integrated
RAM ECC Supported Supported Supported Supported Supported Supported
Ordering Condition #V5 #X5 #V5Q #X5Q #G5 Base ordering code

Diferenciadores clave

  • Combines two automotive communication interfaces in one controller (frente a R5F10BMG)
  • Provides diagnostic coverage beyond basic peripheral operation (frente a R5F10BMGLFB#X5)
  • Uses a high-density 80-pin package for mixed automotive control I/O (frente a R5F10BLGLFB#V5)

Notas de diseño

Assign every MCU pin from the R5F10BMG manufacturer pin table before schematic capture. Several RL78/F13 functions are multiplexed, so a peripheral choice can change whether a pin is available for general-purpose input, output, or a communications function. Preserve the package orientation, exposed thermal strategy if applicable, and all required programming and debug nets. Because an 80-pin LQFP is not represented by a dedicated package drawing in the available library, compare the board footprint directly against the manufacturer package drawing.

Design the 3.3V and 5V operating paths around the manufacturer's absolute maximum and recommended operating conditions. Place supply bypass capacitors adjacent to the appropriate power pins, with the shortest return path through a low-impedance ground plane. Confirm whether the selected ordering code supports the intended rail and whether separate internal voltage regulators require external components. Estimated: total regulator dissipation is approximately P = (VIN - VOUT) × ILOAD plus internal overhead; use the actual rail difference and maximum load when sizing copper area.

Do not treat a suffix change as automatically production-equivalent. Ordering codes can encode temperature range, automotive qualification, quality grade, or packaging conditions even when the core, flash capacity, and footprint match. For an automotive replacement, compare the relevant ordering tables, qualification evidence, errata, flash-programming procedure, and traceability requirements. Also verify reset polarity, boot configuration, oscillator options, and watchdog behavior before substituting one ordering code for another.

Keep CAN and LIN routing short, controlled, and away from switching nodes and high-current actuator outputs. Provide the correct transceiver, common-mode protection, termination, and bias networks because the MCU contains only the digital controller interface. Maintain a continuous ground reference beneath communication routes, use appropriate via stitching around the MCU ground pins, and route sensitive oscillator or reset nets away from motor-control traces. Validate bus levels and timing on hardware using the selected transceiver and representative cable lengths.

Use the safety-monitoring resources as part of the application diagnostics rather than as a substitute for a watchdog and external protection. RAM ECC reports detected memory errors, PLL-lock monitoring confirms clock stability, port-output monitoring helps identify unexpected output states, and stack monitoring can expose stack faults. Design firmware to record these events, enter a defined safe state, and preserve diagnostic evidence. Confirm the behavior and interrupt requirements for each function in the manufacturer datasheet.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The RL78/F13 family and related automotive ordering codes are documented, but exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for the exact R5F10BMGLFB#V5 ordering code require manufacturer documentation.

Búsquedas relacionadas

R5F10BMGLFB#V5 datasheet R5F10BMGLFB#V5 specifications R5F10BMGLFB#V5 pinout R5F10BMGLFB#V5 datasheet pdf R5F10BMGLFB#V5 equivalent R5F10BMGLFB#V5 replacement R5F10BMGLFB#V5 cross reference R5F10BMGLFB#V5 vs R5F10BMGLFB#X5 R5F10BMGLFB#V5 80 pin LQFP R5F10BMGLFB#V5 CAN LIN R5F10BMGLFB#V5 automotive MCU Renesas R5F10BMGLFB#V5 R5F10BMGLFB#V5 price R5F10BMGLFB#V5 stock R5F10BMG application circuit

Componentes & términos relacionados

Renesas Electronics R5F10BMGLFB#V5 R5F10BMGLFB#X5 R5F10BMGLFB#V5Q R5F10BMGLFB#X5Q R5F10BMGLFB#G5 R5F10BMG R5F10BLGLFB#V5 RL78/F13 RL78 16-bit microcontroller embedded microcontroller microcontroller embedded processor semiconductor CAN controller LIN interface RAM ECC PLL lock detection port output state monitoring stack monitoring 128KB flash memory 80-pin LQFP 3.3V 5V
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ