NXP Semiconductors

MC9S08PL8CTJ - 8-Bit 20MHz 8KB Flash MCU | NXP

N.º de pieza: MC9S08PL8CTJ ✓ Activo
2.7 V to 5.5 V Vdss 20-TSSOP Package 20 MHz Speed 8 KB Memory
MOQ: 1 |

MC9S08PL8CTJ Descripción general

The NXP Semiconductors MC9S08PL8CTJ is a low-power 8-bit S08 microcontroller with an operating frequency up to 20 MHz, 8 KB of flash memory, and a 20-TSSOP package. It includes an integrated LCD driver for compact metering and control products, while its small package and 2.7 V to 5.5 V operating range suit battery-operated instruments, industrial controls, and consumer devices.

A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, volatile data memory, input/output ports, and peripherals. Within the semiconductor hierarchy, the MC9S08PL8CTJ is an 8-bit MCU in the S08 family, combining embedded control with communication, timing, analog-conversion, and display-support functions on one device.

The device provides 8 KB of flash program storage, 2 KB of RAM, and 256 bytes of EEPROM according to the product listings. Its 20 MHz maximum bus frequency supports faster control-loop execution and efficient peripheral servicing. Integrated resources include a 10-bit ADC with 12 channels, two SCI UART modules, two FlexTimer channels with two additional channels, and a real-time counter. An integrated LCD driver reduces external display-interface complexity in metering equipment.

The S08 architecture is designed for compact embedded control rather than high-compute workloads. Its peripheral set supports sensor acquisition, serial communications, periodic event timing, and LCD-segment drive generation without requiring multiple companion devices. The 20-TSSOP package has a 0.65 mm pitch, making it suitable for dense PCB layouts while retaining leaded-package inspection and assembly compatibility.

Typical uses include portable utility meters, industrial panel controls, remote sensor nodes, consumer meters, small appliance controllers, and low-power measurement equipment. The LCD driver is especially valuable in segment-display products, while the ADC and timer channels support analog monitoring and periodic sampling. The 2.7 V to 5.5 V supply range allows operation from regulated 3.3 V and 5 V systems.

Designers should confirm the pin functions, oscillator options, programming method, and interrupt-vector requirements in the manufacturer datasheet before layout release. Place decoupling capacitors close to the supply pins, route oscillator and sensitive analog inputs away from high-current switching paths, and reserve programming and debug access for production programming and field maintenance.

This product page combines the NXP device specifications, package information, interface details, application guidance, and a constrained drop-in comparison for engineers evaluating the MC9S08PL8CTJ within existing S08 designs.

Alternativas directas para MC9S08PL8CTJ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MC9S08PL8CTJ (mismo factor de forma y huella) — difiere en ADC Resolution, EEPROM, Flash Memory, Operating Temperature Range, RAM.

NXP Semiconductors
ADC Resolution: 10-bit
EEPROM: Integrated EEPROM
Flash Memory: 4 KB (4K x 8)
Comparar con MC9S08PL8CTJ →

MC9S08PL8SCTJ

✅ Sustitución directa
📦 20-TSSOP
Same 20-TSSOP footprint and S08PL family; bus frequency remains 20 MHz, while exact flash, RAM, and temperature-rating differences require order-code verification

📋 Alternativa de referencia (no en el catálogo)

MC9S08PL4CTJ

✅ Sustitución directa ⚠️ Especificaciones sin verificar
NXP Semiconductors
📦 20-TSSOP
8-bit S08 central processor unit · 20 MHz · 4 KB (4K x 8) · 512 bytes · Integrated EEPROM · 10-bit · Integrated analog comparator · Flexible timers

Consulte el precio

Ver hoja de datos →

MC9S08PL4SCTJ

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 20-TSSOP
Flash memory is 4 KB versus 8 KB, a 50% reduction; bus frequency remains 20 MHz and the package remains 20-TSSOP

📋 Alternativa de referencia (no en el catálogo)

MC9S08PL8CTJ Valores máximos y características eléctricas

Microcontroller Type 8-bit S08 microcontroller
Maximum Bus Frequency 20 MHz
Flash Memory 8 KB
RAM 2 KB
EEPROM 256 bytes
Operating Voltage Range 2.7 V to 5.5 V
Rango de temperatura de funcionamiento -40°C to 85°C
Encapsulado 20-TSSOP
Package Pin Count 20 pins
ADC Resolution 10 bits
ADC Channels 12 channels
SCI UART Modules 2 modules
FlexTimer Channels 2 channels plus 2 channels
Real-Time Counter 1 real-time counter
LCD Driver Integrated
Maximum I/O Pins 30 pins
Power-Saving Modes Stop mode
Peak Reflow Temperature 260°C
Moisture Sensitivity Level MSL 3
Reflow Time at Peak Temperature 40 s
Terminal Finish Tin
Tipo de montaje Surface mount

Guía de configuración de pines de MC9S08PL8CTJ 20 pins

Configuración de pines para MC9S08PL8CTJ (encapsulado 20 pins). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.

Diagrama de patillaje del encapsulado 20 pins para MC9S08PL8CTJ

No hay datos detallados de patillaje disponibles para MC9S08PL8CTJ.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MC9S08PL8CTJ es adecuado para 6 aplicacións: Portable Utility Meter, Industrial Sensor Node, Consumer Metering Device, Small Appliance Controller, Remote Control Panel, Low-Power Data Logger.

🔧

Portable Utility Meter

The MC9S08PL8CTJ fits portable utility meters that combine analog sensing with a local segment display. Its 10-bit ADC with 12 channels supports multiple sensor inputs, while the integrated LCD driver reduces the number of external display-controller connections. The 20 MHz bus frequency provides responsive sampling and control, and 8 KB of flash leaves more room for measurement routines, calibration data, and communication firmware than a 4 KB member of the family. Operate the device from 2.7 V to 5.5 V and evaluate the complete measurement and display duty cycle in stop mode when establishing battery life.

🏭

Industrial Sensor Node

The MC9S08PL8CTJ is appropriate for compact industrial sensor nodes requiring periodic analog measurements and low-power operation. The 12-channel, 10-bit ADC can serve resistive, current, or external sensor-conditioning inputs, while the two SCI UART modules support host or service communications. Its 2.7 V to 5.5 V operating range accommodates regulated industrial rails, and the 20-TSSOP package simplifies assembly where space is constrained. Use the real-time counter and FlexTimer channels to define stable acquisition and communication intervals, and verify analog-noise performance against the required sensor accuracy.

📱

Consumer Metering Device

The MC9S08PL8CTJ supports compact consumer metering devices that display measurements locally and exchange information with a host. The integrated LCD driver is useful for segment-based displays, the 10-bit ADC handles multiple analog inputs, and two SCI UART modules provide serial connectivity without requiring additional interface devices. Its 8 KB flash capacity accommodates application code, calibration constants, and protocol handling in a compact 20-TSSOP footprint. Validate startup time, display update latency, and stop-mode current against the product's metering accuracy and battery-life requirements.

⚡

Small Appliance Controller

The MC9S08PL8CTJ can serve as the primary controller in a small appliance where local sensing, timing, and serial communication are needed. Its 20 MHz S08 core and 8 KB of flash provide dedicated control capacity, while the FlexTimer channels support periodic motor, valve, or heating-control timing. The 12-channel ADC supports temperature, level, or position sensing, and the 2.7 V to 5.5 V range works with common regulated supply arrangements. Keep high-current switching paths separated from analog inputs, and use the manufacturer timing and pin guidance to preserve switching-event accuracy.

🖥️

Remote Control Panel

The MC9S08PL8CTJ is well matched to compact remote-control panels that combine button inputs, status LEDs, communications, and optional local display feedback. Two SCI UART modules can connect the controller to a main board or wireless module, while the timer and real-time-counter resources organize user-input debouncing, periodic updates, and communication timing. The 20-TSSOP package keeps the design compact, and 8 KB of flash provides more code space than a 4 KB alternative for interface state machines and diagnostics. Confirm pin multiplexing and peripheral conflicts in the datasheet before finalizing the control-panel schematic.

📟

Low-Power Data Logger

The MC9S08PL8CTJ supports low-power data loggers that periodically acquire analog data and retain it in nonvolatile memory. Its 10-bit ADC supports up to 12 channels, the 8 KB flash provides room for firmware and parameters, and the 256-byte EEPROM can retain configuration or calibration values. FlexTimer channels and the real-time counter help establish repeatable sampling intervals, while stop mode can reduce consumption between measurement events. Design the logging cadence around the required retention period, and confirm write endurance and current consumption for the selected storage and power architecture.

What is the MC9S08PL8CTJ?
The MC9S08PL8CTJ is an 8-bit NXP S08 microcontroller rated for operation up to 20 MHz and packaged in a 20-TSSOP. According to the NXP product page, it is a low-power device intended for portable metering, industrial, and consumer applications. Its integrated LCD driver, 8 KB of flash, and communication peripherals reduce the number of external components required in compact control systems.
What are the key specifications of MC9S08PL8CTJ that engineers should know?
The MC9S08PL8CTJ combines a 20 MHz maximum bus frequency, 8 KB of flash memory, and a 20-TSSOP package. The product listings also identify 2 KB of RAM, 256 bytes of EEPROM, a 10-bit 12-channel ADC, two SCI UART modules, an integrated LCD driver, and a 2.7 V to 5.5 V operating range. These specifications position it for compact metering, industrial-control, and low-power consumer products.
Where to buy MC9S08PL8CTJ online?
Use the Request a Quote form on this page to request MC9S08PL8CTJ sourcing, current stock confirmation, and a quantity quotation. The part is an NXP 8-bit S08 microcontroller in a 20-TSSOP package, so its ordering details should be checked against the required device revision, temperature range, and tape-and-reel presentation before an order is released.
What is the price of MC9S08PL8CTJ?
Current MC9S08PL8CTJ pricing depends on order quantity, device markings, packaging, and supply status. Use the Request a Quote form on this page for a current quotation and to specify the required quantity. For design budgeting, the confirmed order should also account for the 20-TSSOP package, programmed-device requirements, and any inspection or traceability needs.
What is the lead time for MC9S08PL8CTJ?
The current lead time for MC9S08PL8CTJ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, programmed or unprogrammed delivery, packaging configuration, and manufacturing conditions. Supply planning should therefore use the supplier's current production and delivery commitment rather than a generic market estimate.
Is MC9S08PL8CTJ in stock?
Stock status for MC9S08PL8CTJ changes with demand and available inventory, so use the Request a Quote form on this page for a current availability confirmation. Include the required quantity, programming state, and packaging format in the request. This helps the supplier match the exact MC9S08PL8CTJ order rather than a related S08 configuration.
Where can I download the MC9S08PL8CTJ datasheet PDF?
The official MC9S08PL8CTJ product and datasheet information is available through the NXP product page linked on this page. According to the manufacturer listing, the device is an 8-bit, 20 MHz S08 microcontroller with 8 KB of flash in a 20-TSSOP package. Use the manufacturer datasheet for the authoritative pin descriptions, electrical limits, clock configuration, and programming procedure.
Where can I find the MC9S08PL8CTJ pinout?
Use the pin-description table and package drawing in the NXP MC9S08PL8CTJ manufacturer datasheet when assigning PCB tracks. The verified package designation is 20-TSSOP, and the device includes power, ground, I/O, clock, programming, and peripheral functions. Do not infer unused pins as safe connections without checking the exact pin-description table for the device revision being designed.
Is MC9S08PL8CTJ suitable for portable metering applications?
The MC9S08PL8CTJ is suitable for portable metering because it combines a 10-bit 12-channel ADC, a real-time counter, an integrated LCD driver, and a 2.7 V to 5.5 V operating range. The 20 MHz bus frequency supports responsive control and measurement tasks, while the LCD driver can reduce display-interface component count. Battery life must still be evaluated using the device's stop-mode behavior and the complete measurement duty cycle.
MC9S08PL8CTJ vs MC9S08PL4CTJ - which is better for new designs?
Choose MC9S08PL8CTJ when the application benefits from twice the flash capacity of MC9S08PL4CTJ: 8 KB rather than 4 KB, while both operate at up to 20 MHz. The extra 4 KB can reduce code compression, external-memory interfaces, or application-code restructuring. MC9S08PL4CTJ may be adequate for smaller firmware, but its smaller memory limit should be checked before committing the design.
When should I choose MC9S08PL8CTJ over another S08 MCU?
Choose MC9S08PL8CTJ when an existing 20-TSSOP design benefits from 8 KB of flash while retaining a 20 MHz S08 processor and integrated LCD driver. It is especially suitable for segment-display meters and compact controllers that need local sensing and serial communications. Select a different family member when lower flash, a different package, another peripheral mix, or a different architecture better matches the product requirements.
What is the best drop-in replacement for MC9S08PL8CTJ?
The closest same-package option identified for MC9S08PL8CTJ is MC9S08PL4CTJ, which uses a 20-TSSOP package but provides 4 KB of flash instead of 8 KB. It can fit the physical footprint, but its flash capacity is 50% lower and existing firmware may not fit. The replacement should therefore be treated as a design-review candidate rather than an automatic firmware-compatible substitution.
Can MC9S08PL4CTJ replace MC9S08PL8CTJ?
MC9S08PL4CTJ can occupy the same 20-TSSOP footprint, but it has 4 KB of flash compared with the MC9S08PL8CTJ's 8 KB. That is a 50% reduction in program memory and may prevent the existing firmware from fitting. Before replacement, verify the complete pin map, startup behavior, peripheral configuration, device identifier, and binary size against the manufacturer documentation.
What can replace MC9S08PL8CTJ?
A replacement must match the 20-TSSOP footprint, 20 MHz performance class, required S08 peripherals, and available program memory. MC9S08PL4CTJ is a same-package family option, while MC9S08PL4SCTJ and MC9S08PL8SCTJ are additional same-family package candidates. None should be accepted as a drop-in without checking firmware size, pin functions, interrupt behavior, and device configuration.
Is MC9S08PL8CTJ the same as MC9S08PL8SCTJ?
MC9S08PL8CTJ and MC9S08PL8SCTJ are related 20-TSSOP S08 devices, but their exact orderable variants must be compared by ordering code and datasheet. The MC9S08PL8CTJ is identified as an 8 MHz-class 8-bit MCU with 8 KB flash and 2 KB RAM, while the PL8S suffix requires verification against its own device documentation. Pin, memory, temperature, and qualification differences determine whether it is a valid substitution.
What is the best NXP equivalent for MC9S08PL8CTJ?
MC9S08PL8SCTJ is the closest identified NXP-family candidate because it shares the 20-TSSOP package and S08PL naming family. Its operating details still require confirmation from its manufacturer datasheet. MC9S08PL4CTJ is another footprint-compatible NXP option, but it has 4 KB of flash instead of 8 KB, making it suitable only when firmware and application requirements fit the reduced memory capacity.

Datos de referencia de ingeniería para MC9S08PL8CTJ — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MC9S08PL8CTJ for compact S08 control designs that require up to 20 MHz processing, 8 KB of flash, a 10-bit 12-channel ADC, two SCI UART modules, and an integrated LCD driver. It is particularly suitable for portable meters and industrial sensor nodes where the 2.7 V to 5.5 V range and 20-TSSOP package simplify board construction. MC9S08PL8SCTJ should be considered first when it matches the required orderable suffix, temperature grade, and memory configuration. MC9S08PL4CTJ and MC9S08PL4SCTJ are appropriate only when 4 KB of flash is sufficient, because they provide 50% less program memory than the target. For every option, verify pin multiplexing, peripheral availability, startup behavior, interrupt mapping, and the compiled binary size before treating the change as a drop-in modification.

Comparación con alternativas

Parámetro Este producto MC9S08PL8SCTJ MC9S08PL4CTJ MC9S08PL4SCTJ
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 20-TSSOP 20-TSSOP 20-TSSOP 20-TSSOP
Maximum Bus Frequency 20 MHz 20 MHz 20 MHz 20 MHz

Diferenciadores clave

  • Twice the flash memory of the 4 KB alternatives (frente a MC9S08PL4CTJ)
  • Maintains the 20 MHz control class across the compared S08PL options (frente a MC9S08PL4SCTJ)
  • Compact 20-TSSOP integration with LCD support (frente a MC9S08PL8SCTJ)

Notas de diseño

Place the supply decoupling capacitor directly between the device supply and ground pins, with the shortest practical trace lengths. Route the oscillator network away from UART activity, LCD outputs, and switching-node wiring to reduce susceptibility to injected noise. The 20-TSSOP footprint has a 0.65 mm pitch, so inspect land patterns and solderability with the assembly house before releasing a volume build.

Treat analog inputs as sensitive nodes even though the ADC is 10-bit. Keep sensor traces short, place any input filtering close to the MCU pins, and provide a quiet ground-return path to the device ground pins. If an LCD or communication output changes rapidly near an analog channel, compare the measured input noise against the application's required accuracy and revise the placement if necessary.

Verify the 2.7 V to 5.5 V operating range across the complete temperature range and account for voltage tolerance at the MCU pins. For battery-powered products, measure the active current, analog-sampling current, LCD-drive current, and stop-mode current separately. The timer interval and LCD duty cycle often determine average power consumption more strongly than the standby specification alone.

Do not treat the physical footprint match as proof of firmware compatibility. Check device identifiers, interrupt vectors, memory sizes, oscillator setup, watchdog behavior, peripheral multiplexing, and programming requirements before substituting an S08 family member. The 8 KB target has twice the flash of the 4 KB alternatives, so binary-size overflow is an immediate risk in a direct replacement.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The component is an industrial-temperature 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is listed as tin, but lead-free and halogen-free classifications are not stated.

Datos verificados el: 2026-11-10 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MC9S08PL8CTJ datasheet MC9S08PL8CTJ datasheet pdf MC9S08PL8CTJ pinout MC9S08PL8CTJ specifications MC9S08PL8CTJ 20-TSSOP NXP MC9S08PL8CTJ MC9S08PL8CTJ equivalent MC9S08PL8CTJ replacement MC9S08PL8CTJ vs MC9S08PL8SCTJ MC9S08PL8CTJ price MC9S08PL8CTJ stock MC9S08PL8CTJ LCD metering

Componentes & términos relacionados

NXP Semiconductors MC9S08PL8CTJ MC9S08PL8SCTJ MC9S08PL4CTJ MC9S08PL4SCTJ S08 architecture 8-bit microcontroller MCU embedded controller semiconductor flash memory RAM EEPROM 10-bit ADC SCI UART FlexTimer real-time counter LCD driver 20-TSSOP TSSOP package family surface-mount package portable metering industrial sensor node 2.7 V to 5.5 V 20 MHz
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ