MC9S08PL8CTJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MPN: MC9S08PL8CTJ ✓ AktifMC9S08PL8CTJ Ringkasan
A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, volatile data memory, input/output ports, and peripherals. Within the semiconductor hierarchy, the MC9S08PL8CTJ is an 8-bit MCU in the S08 family, combining embedded control with communication, timing, analog-conversion, and display-support functions on one device.
The device provides 8 KB of flash program storage, 2 KB of RAM, and 256 bytes of EEPROM according to the product listings. Its 20 MHz maximum bus frequency supports faster control-loop execution and efficient peripheral servicing. Integrated resources include a 10-bit ADC with 12 channels, two SCI UART modules, two FlexTimer channels with two additional channels, and a real-time counter. An integrated LCD driver reduces external display-interface complexity in metering equipment.
The S08 architecture is designed for compact embedded control rather than high-compute workloads. Its peripheral set supports sensor acquisition, serial communications, periodic event timing, and LCD-segment drive generation without requiring multiple companion devices. The 20-TSSOP package has a 0.65 mm pitch, making it suitable for dense PCB layouts while retaining leaded-package inspection and assembly compatibility.
Typical uses include portable utility meters, industrial panel controls, remote sensor nodes, consumer meters, small appliance controllers, and low-power measurement equipment. The LCD driver is especially valuable in segment-display products, while the ADC and timer channels support analog monitoring and periodic sampling. The 2.7 V to 5.5 V supply range allows operation from regulated 3.3 V and 5 V systems.
Designers should confirm the pin functions, oscillator options, programming method, and interrupt-vector requirements in the manufacturer datasheet before layout release. Place decoupling capacitors close to the supply pins, route oscillator and sensitive analog inputs away from high-current switching paths, and reserve programming and debug access for production programming and field maintenance.
This product page combines the NXP device specifications, package information, interface details, application guidance, and a constrained drop-in comparison for engineers evaluating the MC9S08PL8CTJ within existing S08 designs.
Pilihan pengganti yang segera untuk MC9S08PL8CTJ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera MC9S08PL8CTJ (sama faktor bentuk dan kaki) — berbeza dalam ADC Resolution, EEPROM, Flash Memory, Operating Temperature Range, RAM.
MC9S08PL8SCTJ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
MC9S08PL4CTJ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →MC9S08PL4SCTJ
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
MC9S08PL8CTJ Penilaian maksimum & Ciri-ciri Elektrik
| Microcontroller Type | 8-bit S08 microcontroller |
| Maximum Bus Frequency | 20 MHz |
| Flash Memory | 8 KB |
| RAM | 2 KB |
| EEPROM | 256 bytes |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Gambaran Suhu Operasi | -40°C to 85°C |
| Kemasan | 20-TSSOP |
| Package Pin Count | 20 pins |
| ADC Resolution | 10 bits |
| ADC Channels | 12 channels |
| SCI UART Modules | 2 modules |
| FlexTimer Channels | 2 channels plus 2 channels |
| Real-Time Counter | 1 real-time counter |
| LCD Driver | Integrated |
| Maximum I/O Pins | 30 pins |
| Power-Saving Modes | Stop mode |
| Peak Reflow Temperature | 260°C |
| Moisture Sensitivity Level | MSL 3 |
| Reflow Time at Peak Temperature | 40 s |
| Terminal Finish | Tin |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin MC9S08PL8CTJ 20 pins
Konfigurasi pin untuk MC9S08PL8CTJ (20 pins pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk MC9S08PL8CTJ.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
MC9S08PL8CTJ patut untuk 6 aplikasis: Portable Utility Meter, Industrial Sensor Node, Consumer Metering Device, Small Appliance Controller, Remote Control Panel, Low-Power Data Logger.
Portable Utility Meter
The MC9S08PL8CTJ fits portable utility meters that combine analog sensing with a local segment display. Its 10-bit ADC with 12 channels supports multiple sensor inputs, while the integrated LCD driver reduces the number of external display-controller connections. The 20 MHz bus frequency provides responsive sampling and control, and 8 KB of flash leaves more room for measurement routines, calibration data, and communication firmware than a 4 KB member of the family. Operate the device from 2.7 V to 5.5 V and evaluate the complete measurement and display duty cycle in stop mode when establishing battery life.
Industrial Sensor Node
The MC9S08PL8CTJ is appropriate for compact industrial sensor nodes requiring periodic analog measurements and low-power operation. The 12-channel, 10-bit ADC can serve resistive, current, or external sensor-conditioning inputs, while the two SCI UART modules support host or service communications. Its 2.7 V to 5.5 V operating range accommodates regulated industrial rails, and the 20-TSSOP package simplifies assembly where space is constrained. Use the real-time counter and FlexTimer channels to define stable acquisition and communication intervals, and verify analog-noise performance against the required sensor accuracy.
Consumer Metering Device
The MC9S08PL8CTJ supports compact consumer metering devices that display measurements locally and exchange information with a host. The integrated LCD driver is useful for segment-based displays, the 10-bit ADC handles multiple analog inputs, and two SCI UART modules provide serial connectivity without requiring additional interface devices. Its 8 KB flash capacity accommodates application code, calibration constants, and protocol handling in a compact 20-TSSOP footprint. Validate startup time, display update latency, and stop-mode current against the product's metering accuracy and battery-life requirements.
Small Appliance Controller
The MC9S08PL8CTJ can serve as the primary controller in a small appliance where local sensing, timing, and serial communication are needed. Its 20 MHz S08 core and 8 KB of flash provide dedicated control capacity, while the FlexTimer channels support periodic motor, valve, or heating-control timing. The 12-channel ADC supports temperature, level, or position sensing, and the 2.7 V to 5.5 V range works with common regulated supply arrangements. Keep high-current switching paths separated from analog inputs, and use the manufacturer timing and pin guidance to preserve switching-event accuracy.
Remote Control Panel
The MC9S08PL8CTJ is well matched to compact remote-control panels that combine button inputs, status LEDs, communications, and optional local display feedback. Two SCI UART modules can connect the controller to a main board or wireless module, while the timer and real-time-counter resources organize user-input debouncing, periodic updates, and communication timing. The 20-TSSOP package keeps the design compact, and 8 KB of flash provides more code space than a 4 KB alternative for interface state machines and diagnostics. Confirm pin multiplexing and peripheral conflicts in the datasheet before finalizing the control-panel schematic.
Low-Power Data Logger
The MC9S08PL8CTJ supports low-power data loggers that periodically acquire analog data and retain it in nonvolatile memory. Its 10-bit ADC supports up to 12 channels, the 8 KB flash provides room for firmware and parameters, and the 256-byte EEPROM can retain configuration or calibration values. FlexTimer channels and the real-time counter help establish repeatable sampling intervals, while stop mode can reduce consumption between measurement events. Design the logging cadence around the required retention period, and confirm write endurance and current consumption for the selected storage and power architecture.
Data referensi kejuruteraan untuk MC9S08PL8CTJ — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | MC9S08PL8SCTJ | MC9S08PL4CTJ | MC9S08PL4SCTJ |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Maximum Bus Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
Penyeberangsung Jelas
- Twice the flash memory of the 4 KB alternatives (vsMC9S08PL4CTJ)
- Maintains the 20 MHz control class across the compared S08PL options (vsMC9S08PL4SCTJ)
- Compact 20-TSSOP integration with LCD support (vsMC9S08PL8SCTJ)
Catatan Desain
Place the supply decoupling capacitor directly between the device supply and ground pins, with the shortest practical trace lengths. Route the oscillator network away from UART activity, LCD outputs, and switching-node wiring to reduce susceptibility to injected noise. The 20-TSSOP footprint has a 0.65 mm pitch, so inspect land patterns and solderability with the assembly house before releasing a volume build.
Treat analog inputs as sensitive nodes even though the ADC is 10-bit. Keep sensor traces short, place any input filtering close to the MCU pins, and provide a quiet ground-return path to the device ground pins. If an LCD or communication output changes rapidly near an analog channel, compare the measured input noise against the application's required accuracy and revise the placement if necessary.
Verify the 2.7 V to 5.5 V operating range across the complete temperature range and account for voltage tolerance at the MCU pins. For battery-powered products, measure the active current, analog-sampling current, LCD-drive current, and stop-mode current separately. The timer interval and LCD duty cycle often determine average power consumption more strongly than the standby specification alone.
Do not treat the physical footprint match as proof of firmware compatibility. Check device identifiers, interrupt vectors, memory sizes, oscillator setup, watchdog behavior, peripheral multiplexing, and programming requirements before substituting an S08 family member. The 8 KB target has twice the flash of the 4 KB alternatives, so binary-size overflow is an immediate risk in a direct replacement.
Maklumat Kesediaan
The component is an industrial-temperature 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is listed as tin, but lead-free and halogen-free classifications are not stated.