MC9S08PL8CTJ - 8-Bit 20MHz 8KB Flash MCU | NXP
MPN: MC9S08PL8CTJ ✓ Hoạt độngMC9S08PL8CTJ Tóm tắt
A microcontroller is a programmable integrated circuit containing a processor core, nonvolatile program memory, volatile data memory, input/output ports, and peripherals. Within the semiconductor hierarchy, the MC9S08PL8CTJ is an 8-bit MCU in the S08 family, combining embedded control with communication, timing, analog-conversion, and display-support functions on one device.
The device provides 8 KB of flash program storage, 2 KB of RAM, and 256 bytes of EEPROM according to the product listings. Its 20 MHz maximum bus frequency supports faster control-loop execution and efficient peripheral servicing. Integrated resources include a 10-bit ADC with 12 channels, two SCI UART modules, two FlexTimer channels with two additional channels, and a real-time counter. An integrated LCD driver reduces external display-interface complexity in metering equipment.
The S08 architecture is designed for compact embedded control rather than high-compute workloads. Its peripheral set supports sensor acquisition, serial communications, periodic event timing, and LCD-segment drive generation without requiring multiple companion devices. The 20-TSSOP package has a 0.65 mm pitch, making it suitable for dense PCB layouts while retaining leaded-package inspection and assembly compatibility.
Typical uses include portable utility meters, industrial panel controls, remote sensor nodes, consumer meters, small appliance controllers, and low-power measurement equipment. The LCD driver is especially valuable in segment-display products, while the ADC and timer channels support analog monitoring and periodic sampling. The 2.7 V to 5.5 V supply range allows operation from regulated 3.3 V and 5 V systems.
Designers should confirm the pin functions, oscillator options, programming method, and interrupt-vector requirements in the manufacturer datasheet before layout release. Place decoupling capacitors close to the supply pins, route oscillator and sensitive analog inputs away from high-current switching paths, and reserve programming and debug access for production programming and field maintenance.
This product page combines the NXP device specifications, package information, interface details, application guidance, and a constrained drop-in comparison for engineers evaluating the MC9S08PL8CTJ within existing S08 designs.
Bộ thay thế dễ dàng lắp đặt cho MC9S08PL8CTJ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08PL8CTJ (cùng hình factor và footprint) — khác nhau ở ADC Resolution, EEPROM, Flash Memory, Operating Temperature Range, RAM.
MC9S08PL8SCTJ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08PL4CTJ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC9S08PL4SCTJ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08PL8CTJ Tỷ lệ tối đa & tính chất điện
| Microcontroller Type | 8-bit S08 microcontroller |
| Maximum Bus Frequency | 20 MHz |
| Flash Memory | 8 KB |
| RAM | 2 KB |
| EEPROM | 256 bytes |
| Operating Voltage Range | 2.7 V to 5.5 V |
| Khoảng nhiệt độ hoạt động | -40°C to 85°C |
| Hộp | 20-TSSOP |
| Package Pin Count | 20 pins |
| ADC Resolution | 10 bits |
| ADC Channels | 12 channels |
| SCI UART Modules | 2 modules |
| FlexTimer Channels | 2 channels plus 2 channels |
| Real-Time Counter | 1 real-time counter |
| LCD Driver | Integrated |
| Maximum I/O Pins | 30 pins |
| Power-Saving Modes | Stop mode |
| Peak Reflow Temperature | 260°C |
| Moisture Sensitivity Level | MSL 3 |
| Reflow Time at Peak Temperature | 40 s |
| Terminal Finish | Tin |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân MC9S08PL8CTJ 20 pins
Cấu hình chân cho MC9S08PL8CTJ (20 pins gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MC9S08PL8CTJ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MC9S08PL8CTJ phù hợp cho 6 Áp dụngs: Portable Utility Meter, Industrial Sensor Node, Consumer Metering Device, Small Appliance Controller, Remote Control Panel, Low-Power Data Logger.
Portable Utility Meter
The MC9S08PL8CTJ fits portable utility meters that combine analog sensing with a local segment display. Its 10-bit ADC with 12 channels supports multiple sensor inputs, while the integrated LCD driver reduces the number of external display-controller connections. The 20 MHz bus frequency provides responsive sampling and control, and 8 KB of flash leaves more room for measurement routines, calibration data, and communication firmware than a 4 KB member of the family. Operate the device from 2.7 V to 5.5 V and evaluate the complete measurement and display duty cycle in stop mode when establishing battery life.
Industrial Sensor Node
The MC9S08PL8CTJ is appropriate for compact industrial sensor nodes requiring periodic analog measurements and low-power operation. The 12-channel, 10-bit ADC can serve resistive, current, or external sensor-conditioning inputs, while the two SCI UART modules support host or service communications. Its 2.7 V to 5.5 V operating range accommodates regulated industrial rails, and the 20-TSSOP package simplifies assembly where space is constrained. Use the real-time counter and FlexTimer channels to define stable acquisition and communication intervals, and verify analog-noise performance against the required sensor accuracy.
Consumer Metering Device
The MC9S08PL8CTJ supports compact consumer metering devices that display measurements locally and exchange information with a host. The integrated LCD driver is useful for segment-based displays, the 10-bit ADC handles multiple analog inputs, and two SCI UART modules provide serial connectivity without requiring additional interface devices. Its 8 KB flash capacity accommodates application code, calibration constants, and protocol handling in a compact 20-TSSOP footprint. Validate startup time, display update latency, and stop-mode current against the product's metering accuracy and battery-life requirements.
Small Appliance Controller
The MC9S08PL8CTJ can serve as the primary controller in a small appliance where local sensing, timing, and serial communication are needed. Its 20 MHz S08 core and 8 KB of flash provide dedicated control capacity, while the FlexTimer channels support periodic motor, valve, or heating-control timing. The 12-channel ADC supports temperature, level, or position sensing, and the 2.7 V to 5.5 V range works with common regulated supply arrangements. Keep high-current switching paths separated from analog inputs, and use the manufacturer timing and pin guidance to preserve switching-event accuracy.
Remote Control Panel
The MC9S08PL8CTJ is well matched to compact remote-control panels that combine button inputs, status LEDs, communications, and optional local display feedback. Two SCI UART modules can connect the controller to a main board or wireless module, while the timer and real-time-counter resources organize user-input debouncing, periodic updates, and communication timing. The 20-TSSOP package keeps the design compact, and 8 KB of flash provides more code space than a 4 KB alternative for interface state machines and diagnostics. Confirm pin multiplexing and peripheral conflicts in the datasheet before finalizing the control-panel schematic.
Low-Power Data Logger
The MC9S08PL8CTJ supports low-power data loggers that periodically acquire analog data and retain it in nonvolatile memory. Its 10-bit ADC supports up to 12 channels, the 8 KB flash provides room for firmware and parameters, and the 256-byte EEPROM can retain configuration or calibration values. FlexTimer channels and the real-time counter help establish repeatable sampling intervals, while stop mode can reduce consumption between measurement events. Design the logging cadence around the required retention period, and confirm write endurance and current consumption for the selected storage and power architecture.
Dữ liệu tham khảo kỹ thuật cho MC9S08PL8CTJ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S08PL8SCTJ | MC9S08PL4CTJ | MC9S08PL4SCTJ |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Maximum Bus Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
Bảo phân biệt quan trọng
- Twice the flash memory of the 4 KB alternatives (vsMC9S08PL4CTJ)
- Maintains the 20 MHz control class across the compared S08PL options (vsMC9S08PL4SCTJ)
- Compact 20-TSSOP integration with LCD support (vsMC9S08PL8SCTJ)
Ghi chú thiết kế
Place the supply decoupling capacitor directly between the device supply and ground pins, with the shortest practical trace lengths. Route the oscillator network away from UART activity, LCD outputs, and switching-node wiring to reduce susceptibility to injected noise. The 20-TSSOP footprint has a 0.65 mm pitch, so inspect land patterns and solderability with the assembly house before releasing a volume build.
Treat analog inputs as sensitive nodes even though the ADC is 10-bit. Keep sensor traces short, place any input filtering close to the MCU pins, and provide a quiet ground-return path to the device ground pins. If an LCD or communication output changes rapidly near an analog channel, compare the measured input noise against the application's required accuracy and revise the placement if necessary.
Verify the 2.7 V to 5.5 V operating range across the complete temperature range and account for voltage tolerance at the MCU pins. For battery-powered products, measure the active current, analog-sampling current, LCD-drive current, and stop-mode current separately. The timer interval and LCD duty cycle often determine average power consumption more strongly than the standby specification alone.
Do not treat the physical footprint match as proof of firmware compatibility. Check device identifiers, interrupt vectors, memory sizes, oscillator setup, watchdog behavior, peripheral multiplexing, and programming requirements before substituting an S08 family member. The 8 KB target has twice the flash of the 4 KB alternatives, so binary-size overflow is an immediate risk in a direct replacement.
Thông tin tuân thủ
The component is an industrial-temperature 8-bit microcontroller rather than an AEC-Q100-qualified automotive device. Terminal finish is listed as tin, but lead-free and halogen-free classifications are not stated.