MC9S08SH4CWJ - 8-Bit 40MHz MCU, 4KB Flash | NXP
N.º de pieza: MC9S08SH4CWJ ✗ Fin de vidaMC9S08SH4CWJ Descripción general
An S08 microcontroller is an 8-bit embedded-control device designed to combine a processor core, program memory, data memory, and mixed-signal peripherals on one integrated circuit. It belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control component. Compared with a general-purpose processor, an S08 MCU is optimized for compact control systems that read sensors, operate actuators, and manage communications through dedicated hardware peripherals.
The MC9S08SH4CWJ provides SCI, SPI, I²C, a 10-bit analog-to-digital converter, an analog comparator, and a temperature sensor. These peripherals reduce the need for external interface circuits in compact industrial or consumer-control products. A 40 MHz core provides timing margin for protocol handling and control-loop execution, while 17 I/O pins allow external sensors, switches, indicators, and actuators to be connected without expanding the device footprint.
The device uses the 8-bit S08 architecture and includes 256 bytes of data RAM. Its 20-pin SOIC package is designed for surface-mount assembly and remains appropriate for conventional leaded-package production lines. Because this part is listed as end of life by NXP, engineers should verify supply continuity, firmware support, and successor options before starting a new high-volume design.
Typical applications include compact industrial controllers, environmental monitoring, digital thermometers, analog sensor interfaces, communication modules, and low-cost embedded control boards. The ADC and comparator support direct measurement of resistive or voltage-based sensors, while SCI, SPI, and I²C enable connection to displays, data loggers, sensors, and external transceivers.
The principal design consideration is lifecycle risk rather than electrical compatibility. Confirm the required S08 toolchain, programming method, memory map, peripheral configuration, and long-term availability before committing a production BOM. PCB designs should follow the manufacturer pin-description table and preserve the 20-pin SOIC footprint.
This page combines the confirmed device specifications, lifecycle status, package information, application guidance, and same-family drop-in alternatives. It also distinguishes electrically similar parts from those that differ materially in flash capacity, temperature grade, or device function, helping engineers assess redesign risk before procurement.
Alternativas directas para MC9S08SH4CWJ — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MC9S08SH4CWJ (mismo factor de forma y huella) — difiere en Supply Voltage, Package, Mounting Type, Flash Memory, ADC Resolution.
MC9S08SH8CWJ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MC9S08SH8MWJ
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MC9S08JS8LCWJ
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MC9S08SH4CWJR
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MC9S08SH2CWJ
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
MC9S08SH4CWJ Valores máximos y características eléctricas
| Product Type | 8-bit S08 microcontroller |
| Frecuencia de reloj máxima | 40 MHz |
| Flash Memory Size | 4 KB (4K x 8) |
| Data RAM Size | 256 B |
| Ancho del bus de datos | 8 bit |
| ADC Resolution | 10 bit |
| Number of I/O Pins | 17 |
| Tensión de alimentación de funcionamiento | 2.7 V to 5.5 V |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| Encapsulado | 20-pin SOIC |
| Estilo de montaje | SMD/SMT |
| Core | S08 |
| Serial Communications Interface | SCI |
| Serial Peripheral Interface | SPI |
| Inter-Integrated Circuit Interface | I²C |
| Analog Comparator | Integrated |
| Temperature Sensor | Integrated |
| Estado del ciclo de vida | End of Life |
Guía de configuración de pines de MC9S08SH4CWJ 20-pin soic
Configuración de pines para MC9S08SH4CWJ (encapsulado 20-pin soic). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MC9S08SH4CWJ.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MC9S08SH4CWJ es adecuado para 6 aplicacións: Industrial Sensor Controller, Digital Temperature Measurement, Communication Interface Module, Home and Building Control Node, Battery-Powered Data Logger, Compact Motor or Actuator Control.
Industrial Sensor Controller
The MC9S08SH4CWJ fits compact industrial sensing equipment that converts analog measurements into embedded control decisions. Its 10-bit ADC and integrated analog comparator reduce the need for external signal-conditioning components when monitoring resistive sensors, potentiometers, or simple threshold circuits. The 17 available I/O pins can connect digital inputs, status indicators, and output drivers, while the 40 MHz S08 core leaves timing headroom for sampling routines and control logic. The 2.7 V to 5.5 V operating range also permits integration with common 5 V industrial signal systems. Because the MCU is End of Life, it is best suited to maintenance of an existing installation or a controlled legacy design where qualification, tooling, and supply continuity have already been established.
Recomendado
Digital Temperature Measurement
The MC9S08SH4CWJ is suitable for a compact digital thermometer or environmental monitor because it combines an S08 core, a 10-bit ADC, an analog comparator, and an integrated temperature sensor. The MCU can acquire a temperature-dependent sensor signal, apply filtering and calibration, and present the result over SCI, SPI, or I²C. Its 40 MHz clock supports periodic sampling without tying the processor to a high-power workload, and the 20-pin SOIC package keeps the controller physically small. For a basic standalone probe, the 4 KB flash may be sufficient for code and calibration constants. A more elaborate logger may require the 8 KB flash option. Verify sensor accuracy and the manufacturer's temperature-conversion procedure before using the integrated temperature-sensor feature.
Recomendado
Communication Interface Module
The MC9S08SH4CWJ can serve as the protocol controller in a small serial-interface module built around the S08 core. Its dedicated SCI, SPI, and I²C peripherals allow simultaneous use of UART-oriented links, sensor buses, and external transceivers without emulating each interface entirely in software. With 17 I/O pins, the design can include status LEDs, mode controls, reset handling, and logic-level interfacing. The 40 MHz operating frequency provides useful performance margin for framing, checksums, and buffer management. Its 2.7 V to 5.5 V range supports both lower-voltage logic and conventional 5 V peripherals. For a communication product expected to remain on the market for many years, evaluate a currently supported MCU because the S08SH family is marked End of Life.
Recomendado
Home and Building Control Node
The MC9S08SH4CWJ fits a small building-control node that reads switches or sensors and drives relays, indicators, or communication transceivers. Its 17 I/O pins provide enough parallel digital connectivity for multiple zones, while the integrated ADC can supervise analog sensors and the analog comparator can implement threshold or fault detection. The 5 V-compatible upper supply limit simplifies integration with conventional control-logic boards, and the 20-pin SOIC package supports automated surface-mount assembly. Four kilobytes of flash can hold compact control firmware, but logging and network protocol stacks may require the 8 KB variant. Consider the End of Life designation during product planning, particularly for connected building equipment where field updates and long-term component continuity are important.
Recomendado
Battery-Powered Data Logger
The MC9S08SH4CWJ is appropriate for a low-duty-cycle battery-powered data logger when firmware size is modest and the controller must combine sensing with serial storage or communications. The low-power requirement is primarily a system-design issue, so the MCU should be placed into its available sleep or stop modes between samples. Its 10-bit ADC supports proportional sensor readings, while SCI, SPI, or I²C can connect to a memory device or radio module. The 4 KB flash limit must be assessed against code size, event tables, and update requirements; MC9S08SH8CWJ provides twice the program storage when additional firmware is unavoidable. Confirm sleep-mode current and analog accuracy for the chosen operating mode. For new battery products, favor a supported low-power platform rather than an end-of-life MCU.
Recomendado
Compact Motor or Actuator Control
The MC9S08SH4CWJ can coordinate a compact actuator controller when the system requires digital sequencing, sensor monitoring, and a modest amount of custom control logic rather than a sophisticated real-time motor-control algorithm. Its 40 MHz S08 core supports fast state-machine execution, the comparator can monitor a feedback threshold, and the ADC can sample an analog command or sensor. Seventeen I/O pins provide outputs for drivers or indicators and inputs for position or limit switches. The 2.7 V to 5.5 V supply range offers flexibility in mixed-voltage designs, subject to careful input-level design. Use appropriate transistor, driver, flyback, and protection circuits around inductive loads rather than driving them directly from MCU pins. Validate timing and worst-case latency against the actuator's safety requirements.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MC9S08SH4CWJ — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MC9S08SH8CWJ | MC9S08SH8MWJ | MC9S08JS8LCWJ | MC9S08SH4CWJR | MC9S08SH2CWJ |
|---|---|---|---|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 4 KB | 8 KB | 8 KB | 8 KB | 4 KB | 2 KB |
| Ordering Packing | Tube | Tube | Tube | Tube | Tape and reel | Tube |
Diferenciadores clave
- Lower flash footprint for compact control firmware (frente a MC9S08SH8CWJ)
- Exact electrical configuration for legacy production (frente a MC9S08SH4CWJR)
- Lower-memory option preserves the same S08SH architecture class (frente a MC9S08SH2CWJ)
Notas de diseño
Do not treat the R suffix in MC9S08SH4CWJR as a different electrical grade. It identifies a tape-and-reel orderable packaging form, whereas MC9S08SH4CWJ is the tube form. Select the suffix according to the board assembly process, and confirm pin, marking, and device specifications against the NXP ordering information before approving either purchasing code.
Design the supply network for the stated 2.7 V to 5.5 V operating range rather than assuming every 5 V application has identical rail tolerance. Place the regulator's bypass capacitors close to the MCU supply pins, maintain the required capacitor type and effective capacitance from the manufacturer guidance, and keep sensitive analog and communication returns away from switching-node currents. Verify brownout, startup, and peak-current behavior at the lowest intended input voltage.
Use the 20-pin SOIC footprint and preserve the manufacturer's pin-numbering orientation. Confirm programming, reset, clock, ground, and supply connections from the pin-description table before routing. In mixed-signal equipment, separate the analog input path from digital return currents and place the ADC reference source close to the MCU with a quiet ground connection. Avoid adding test pads or routed switching nodes adjacent to high-impedance sensor inputs.
The target is marked End of Life, so firmware and supply planning are as important as electrical compatibility. Before adopting MC9S08SH8CWJ or another related device, compare the complete pin description, peripheral set, memory map, reset behavior, clock limits, and development-tool requirements. A larger-flash alternative may solve a code-size problem but does not by itself establish that existing software or PCB nets can be reused unchanged.
Información de cumplimiento
NXP identifies the product as End of Life. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not confirmed in the product information and are therefore recorded as unknown.