MC9S08SH4CWJ - 8-Bit 40MHz MCU, 4KB Flash | NXP
部品番号: MC9S08SH4CWJ ✗ 生産終了MC9S08SH4CWJ 概要
An S08 microcontroller is an 8-bit embedded-control device designed to combine a processor core, program memory, data memory, and mixed-signal peripherals on one integrated circuit. It belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control component. Compared with a general-purpose processor, an S08 MCU is optimized for compact control systems that read sensors, operate actuators, and manage communications through dedicated hardware peripherals.
The MC9S08SH4CWJ provides SCI, SPI, I²C, a 10-bit analog-to-digital converter, an analog comparator, and a temperature sensor. These peripherals reduce the need for external interface circuits in compact industrial or consumer-control products. A 40 MHz core provides timing margin for protocol handling and control-loop execution, while 17 I/O pins allow external sensors, switches, indicators, and actuators to be connected without expanding the device footprint.
The device uses the 8-bit S08 architecture and includes 256 bytes of data RAM. Its 20-pin SOIC package is designed for surface-mount assembly and remains appropriate for conventional leaded-package production lines. Because this part is listed as end of life by NXP, engineers should verify supply continuity, firmware support, and successor options before starting a new high-volume design.
Typical applications include compact industrial controllers, environmental monitoring, digital thermometers, analog sensor interfaces, communication modules, and low-cost embedded control boards. The ADC and comparator support direct measurement of resistive or voltage-based sensors, while SCI, SPI, and I²C enable connection to displays, data loggers, sensors, and external transceivers.
The principal design consideration is lifecycle risk rather than electrical compatibility. Confirm the required S08 toolchain, programming method, memory map, peripheral configuration, and long-term availability before committing a production BOM. PCB designs should follow the manufacturer pin-description table and preserve the 20-pin SOIC footprint.
This page combines the confirmed device specifications, lifecycle status, package information, application guidance, and same-family drop-in alternatives. It also distinguishes electrically similar parts from those that differ materially in flash capacity, temperature grade, or device function, helping engineers assess redesign risk before procurement.
ドロップイン代替品: MC9S08SH4CWJ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S08SH4CWJ (同一形状・フットプリント) — 相違点: Supply Voltage, Package, Mounting Type, Flash Memory, ADC Resolution.
MC9S08SH8CWJ
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC9S08SH8MWJ
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC9S08JS8LCWJ
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MC9S08SH4CWJR
✅ ドロップイン価格はお問い合わせください
データシートを見る →MC9S08SH2CWJ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MC9S08SH4CWJ 最大定格&電気的特性
| Product Type | 8-bit S08 microcontroller |
| 最大クロック周波数 | 40 MHz |
| Flash Memory Size | 4 KB (4K x 8) |
| Data RAM Size | 256 B |
| データバス幅 | 8 bit |
| ADC Resolution | 10 bit |
| Number of I/O Pins | 17 |
| 動作電源電圧 | 2.7 V to 5.5 V |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +85°C |
| パッケージ | 20-pin SOIC |
| 実装スタイル | SMD/SMT |
| Core | S08 |
| Serial Communications Interface | SCI |
| Serial Peripheral Interface | SPI |
| Inter-Integrated Circuit Interface | I²C |
| Analog Comparator | Integrated |
| Temperature Sensor | Integrated |
| ライフサイクル状態 | End of Life |
MC9S08SH4CWJ 20-pin soic ピン配置ガイド
MC9S08SH4CWJ (20-pin soic パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MC9S08SH4CWJ.
詳細は データシート をご参照ください。
主な用途
MC9S08SH4CWJ の用途: 6 件s: Industrial Sensor Controller, Digital Temperature Measurement, Communication Interface Module, Home and Building Control Node, Battery-Powered Data Logger, Compact Motor or Actuator Control.
Industrial Sensor Controller
The MC9S08SH4CWJ fits compact industrial sensing equipment that converts analog measurements into embedded control decisions. Its 10-bit ADC and integrated analog comparator reduce the need for external signal-conditioning components when monitoring resistive sensors, potentiometers, or simple threshold circuits. The 17 available I/O pins can connect digital inputs, status indicators, and output drivers, while the 40 MHz S08 core leaves timing headroom for sampling routines and control logic. The 2.7 V to 5.5 V operating range also permits integration with common 5 V industrial signal systems. Because the MCU is End of Life, it is best suited to maintenance of an existing installation or a controlled legacy design where qualification, tooling, and supply continuity have already been established.
おすすめ
Digital Temperature Measurement
The MC9S08SH4CWJ is suitable for a compact digital thermometer or environmental monitor because it combines an S08 core, a 10-bit ADC, an analog comparator, and an integrated temperature sensor. The MCU can acquire a temperature-dependent sensor signal, apply filtering and calibration, and present the result over SCI, SPI, or I²C. Its 40 MHz clock supports periodic sampling without tying the processor to a high-power workload, and the 20-pin SOIC package keeps the controller physically small. For a basic standalone probe, the 4 KB flash may be sufficient for code and calibration constants. A more elaborate logger may require the 8 KB flash option. Verify sensor accuracy and the manufacturer's temperature-conversion procedure before using the integrated temperature-sensor feature.
おすすめ
Communication Interface Module
The MC9S08SH4CWJ can serve as the protocol controller in a small serial-interface module built around the S08 core. Its dedicated SCI, SPI, and I²C peripherals allow simultaneous use of UART-oriented links, sensor buses, and external transceivers without emulating each interface entirely in software. With 17 I/O pins, the design can include status LEDs, mode controls, reset handling, and logic-level interfacing. The 40 MHz operating frequency provides useful performance margin for framing, checksums, and buffer management. Its 2.7 V to 5.5 V range supports both lower-voltage logic and conventional 5 V peripherals. For a communication product expected to remain on the market for many years, evaluate a currently supported MCU because the S08SH family is marked End of Life.
おすすめ
Home and Building Control Node
The MC9S08SH4CWJ fits a small building-control node that reads switches or sensors and drives relays, indicators, or communication transceivers. Its 17 I/O pins provide enough parallel digital connectivity for multiple zones, while the integrated ADC can supervise analog sensors and the analog comparator can implement threshold or fault detection. The 5 V-compatible upper supply limit simplifies integration with conventional control-logic boards, and the 20-pin SOIC package supports automated surface-mount assembly. Four kilobytes of flash can hold compact control firmware, but logging and network protocol stacks may require the 8 KB variant. Consider the End of Life designation during product planning, particularly for connected building equipment where field updates and long-term component continuity are important.
おすすめ
Battery-Powered Data Logger
The MC9S08SH4CWJ is appropriate for a low-duty-cycle battery-powered data logger when firmware size is modest and the controller must combine sensing with serial storage or communications. The low-power requirement is primarily a system-design issue, so the MCU should be placed into its available sleep or stop modes between samples. Its 10-bit ADC supports proportional sensor readings, while SCI, SPI, or I²C can connect to a memory device or radio module. The 4 KB flash limit must be assessed against code size, event tables, and update requirements; MC9S08SH8CWJ provides twice the program storage when additional firmware is unavoidable. Confirm sleep-mode current and analog accuracy for the chosen operating mode. For new battery products, favor a supported low-power platform rather than an end-of-life MCU.
おすすめ
Compact Motor or Actuator Control
The MC9S08SH4CWJ can coordinate a compact actuator controller when the system requires digital sequencing, sensor monitoring, and a modest amount of custom control logic rather than a sophisticated real-time motor-control algorithm. Its 40 MHz S08 core supports fast state-machine execution, the comparator can monitor a feedback threshold, and the ADC can sample an analog command or sensor. Seventeen I/O pins provide outputs for drivers or indicators and inputs for position or limit switches. The 2.7 V to 5.5 V supply range offers flexibility in mixed-voltage designs, subject to careful input-level design. Use appropriate transistor, driver, flyback, and protection circuits around inductive loads rather than driving them directly from MCU pins. Validate timing and worst-case latency against the actuator's safety requirements.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S08SH4CWJ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S08SH8CWJ | MC9S08SH8MWJ | MC9S08JS8LCWJ | MC9S08SH4CWJR | MC9S08SH2CWJ |
|---|---|---|---|---|---|---|
| Package | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC | 20-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Flash Memory | 4 KB | 8 KB | 8 KB | 8 KB | 4 KB | 2 KB |
| Ordering Packing | Tube | Tube | Tube | Tube | Tape and reel | Tube |
主な差別化要因
- Lower flash footprint for compact control firmware (vs MC9S08SH8CWJ)
- Exact electrical configuration for legacy production (vs MC9S08SH4CWJR)
- Lower-memory option preserves the same S08SH architecture class (vs MC9S08SH2CWJ)
設計ノート
Do not treat the R suffix in MC9S08SH4CWJR as a different electrical grade. It identifies a tape-and-reel orderable packaging form, whereas MC9S08SH4CWJ is the tube form. Select the suffix according to the board assembly process, and confirm pin, marking, and device specifications against the NXP ordering information before approving either purchasing code.
Design the supply network for the stated 2.7 V to 5.5 V operating range rather than assuming every 5 V application has identical rail tolerance. Place the regulator's bypass capacitors close to the MCU supply pins, maintain the required capacitor type and effective capacitance from the manufacturer guidance, and keep sensitive analog and communication returns away from switching-node currents. Verify brownout, startup, and peak-current behavior at the lowest intended input voltage.
Use the 20-pin SOIC footprint and preserve the manufacturer's pin-numbering orientation. Confirm programming, reset, clock, ground, and supply connections from the pin-description table before routing. In mixed-signal equipment, separate the analog input path from digital return currents and place the ADC reference source close to the MCU with a quiet ground connection. Avoid adding test pads or routed switching nodes adjacent to high-impedance sensor inputs.
The target is marked End of Life, so firmware and supply planning are as important as electrical compatibility. Before adopting MC9S08SH8CWJ or another related device, compare the complete pin description, peripheral set, memory map, reset behavior, clock limits, and development-tool requirements. A larger-flash alternative may solve a code-size problem but does not by itself establish that existing software or PCB nets can be reused unchanged.
コンプライアンス情報
NXP identifies the product as End of Life. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not confirmed in the product information and are therefore recorded as unknown.