PABALIKANG MAGBILI NG IKAKATUWID: MC9S08SH4CWJ ay papalapit sa katapusan ng buhay. Huling pagsugod ng order: Magkontak sa amin. Tingnan ang mga magagamit na alternatibong bahagi →
NXP Semiconductors

MC9S08SH4CWJ - 8-Bit 40MHz MCU, 4KB Flash | NXP

MPN: MC9S08SH4CWJ ✗ Tapus ng Buhay
2.7 V to 5.5 V Vdss 20-pin SOIC Package 40 MHz Speed 4 KB (4K x 8) Memory
MOQ: 1 |

MC9S08SH4CWJ Ulas

The NXP Semiconductors MC9S08SH4CWJ is an 8-bit S08 microcontroller operating at up to 40 MHz, with 4 KB flash memory, 256 bytes of RAM, a 10-bit ADC, and 17 I/O pins in a 20-pin SOIC package. Its operating supply range is 2.7 V to 5.5 V, and the specified temperature range is -40°C to +85°C.

An S08 microcontroller is an 8-bit embedded-control device designed to combine a processor core, program memory, data memory, and mixed-signal peripherals on one integrated circuit. It belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control component. Compared with a general-purpose processor, an S08 MCU is optimized for compact control systems that read sensors, operate actuators, and manage communications through dedicated hardware peripherals.

The MC9S08SH4CWJ provides SCI, SPI, I²C, a 10-bit analog-to-digital converter, an analog comparator, and a temperature sensor. These peripherals reduce the need for external interface circuits in compact industrial or consumer-control products. A 40 MHz core provides timing margin for protocol handling and control-loop execution, while 17 I/O pins allow external sensors, switches, indicators, and actuators to be connected without expanding the device footprint.

The device uses the 8-bit S08 architecture and includes 256 bytes of data RAM. Its 20-pin SOIC package is designed for surface-mount assembly and remains appropriate for conventional leaded-package production lines. Because this part is listed as end of life by NXP, engineers should verify supply continuity, firmware support, and successor options before starting a new high-volume design.

Typical applications include compact industrial controllers, environmental monitoring, digital thermometers, analog sensor interfaces, communication modules, and low-cost embedded control boards. The ADC and comparator support direct measurement of resistive or voltage-based sensors, while SCI, SPI, and I²C enable connection to displays, data loggers, sensors, and external transceivers.

The principal design consideration is lifecycle risk rather than electrical compatibility. Confirm the required S08 toolchain, programming method, memory map, peripheral configuration, and long-term availability before committing a production BOM. PCB designs should follow the manufacturer pin-description table and preserve the 20-pin SOIC footprint.

This page combines the confirmed device specifications, lifecycle status, package information, application guidance, and same-family drop-in alternatives. It also distinguishes electrically similar parts from those that differ materially in flash capacity, temperature grade, or device function, helping engineers assess redesign risk before procurement.

Mga alternatibo na pwedeng ilagay na MC9S08SH4CWJ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok MC9S08SH4CWJ (parehas na form factor at footprint) — pagkakaiba sa Supply Voltage, Package, Mounting Type, Flash Memory, ADC Resolution.

NXP Semiconductors
Supply Voltage: 5 V
Mounting Type: Surface Mount
Flash Memory: 4 KB (4K x 8 bits)
Ikabit sa MC9S08SH4CWJ →
NXP Semiconductors
Supply Voltage: 2.7 V to 5.5 V
Package: 20-pin PDIP (DIP-20, 0.300 inch / 7.62 mm)
Mounting Type: Through-Hole (THT)
Ikabit sa MC9S08SH4CWJ →
NXP Semiconductors
Mounting Type: Surface mount
Flash Memory: 8 KB
Ikabit sa MC9S08SH4CWJ →
NXP Semiconductors
Supply Voltage: 3.3 V to 5 V
Mounting Type: Surface mount
Flash Memory: 8 KB
Ikabit sa MC9S08SH4CWJ →

MC9S08SH8CWJ

✅ Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit S08SH microcontroller · Enhanced HCS08 core · 40 MHz · 8 KB · 8K x 8 bits · 8-bit · 5 V · 20-pin SOIC

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S08SH8MWJ

✅ Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit S08 CISC microcontroller · S08 core · 40 MHz · 8 KB · 8K x 8 bits · 512 bytes · 3.3 V to 5 V · 20-pin SOIC

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S08JS8LCWJ

✅ Drop-In
📦 20-pin SOIC
Flash increases from 4 KB to 8 KB, a 100% increase; S08SH family compatibility with S08SG supports evaluation, but peripheral and pin details require review.

📋 Alternatibo na Reference (hindi sa katalogo)

MC9S08SH4CWJR

✅ Drop-In
NXP Semiconductors
📦 20-pin SOIC
8-bit HCS08 Microcontroller · 40 MHz · Enhanced HCS08 8-bit core · HC08 instruction set with added BGND instruction · 4 KB (4K x 8 bits) · 5 V · 20-pin SOIC · 20 pins

Magkontak para sa presyo

Tingnan ang Datasheet →

MC9S08SH2CWJ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 20-pin SOIC
Flash decreases from 4 KB to 2 KB, a 50% reduction; the same-family S08SH architecture and 20-pin SOIC footprint support drop-in evaluation.

📋 Alternatibo na Reference (hindi sa katalogo)

MC9S08SH4CWJ Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit S08 microcontroller
Maksimum na Taktiko ng Oras 40 MHz
Flash Memory Size 4 KB (4K x 8)
Data RAM Size 256 B
Width ng Data Bus 8 bit
ADC Resolution 10 bit
Number of I/O Pins 17
Supply Voltage na Operasyon 2.7 V to 5.5 V
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Packhaging 20-pin SOIC
Style ng Pagpapasok SMD/SMT
Core S08
Serial Communications Interface SCI
Serial Peripheral Interface SPI
Inter-Integrated Circuit Interface I²C
Analog Comparator Integrated
Temperature Sensor Integrated
Katayuan ng Lifecycle End of Life

Gabay sa Pin Configuration ng MC9S08SH4CWJ 20-pin soic

Pin configuration para sa MC9S08SH4CWJ (20-pin soic package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 20-pin soic package para sa MC9S08SH4CWJ

Wala ng detalyadong pinout data na magagamit para sa MC9S08SH4CWJ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

MC9S08SH4CWJ ay nararapat para sa 6 aplikasyons: Industrial Sensor Controller, Digital Temperature Measurement, Communication Interface Module, Home and Building Control Node, Battery-Powered Data Logger, Compact Motor or Actuator Control.

🏭

Industrial Sensor Controller

The MC9S08SH4CWJ fits compact industrial sensing equipment that converts analog measurements into embedded control decisions. Its 10-bit ADC and integrated analog comparator reduce the need for external signal-conditioning components when monitoring resistive sensors, potentiometers, or simple threshold circuits. The 17 available I/O pins can connect digital inputs, status indicators, and output drivers, while the 40 MHz S08 core leaves timing headroom for sampling routines and control logic. The 2.7 V to 5.5 V operating range also permits integration with common 5 V industrial signal systems. Because the MCU is End of Life, it is best suited to maintenance of an existing installation or a controlled legacy design where qualification, tooling, and supply continuity have already been established.

💊

Digital Temperature Measurement

The MC9S08SH4CWJ is suitable for a compact digital thermometer or environmental monitor because it combines an S08 core, a 10-bit ADC, an analog comparator, and an integrated temperature sensor. The MCU can acquire a temperature-dependent sensor signal, apply filtering and calibration, and present the result over SCI, SPI, or I²C. Its 40 MHz clock supports periodic sampling without tying the processor to a high-power workload, and the 20-pin SOIC package keeps the controller physically small. For a basic standalone probe, the 4 KB flash may be sufficient for code and calibration constants. A more elaborate logger may require the 8 KB flash option. Verify sensor accuracy and the manufacturer's temperature-conversion procedure before using the integrated temperature-sensor feature.

🌐

Communication Interface Module

The MC9S08SH4CWJ can serve as the protocol controller in a small serial-interface module built around the S08 core. Its dedicated SCI, SPI, and I²C peripherals allow simultaneous use of UART-oriented links, sensor buses, and external transceivers without emulating each interface entirely in software. With 17 I/O pins, the design can include status LEDs, mode controls, reset handling, and logic-level interfacing. The 40 MHz operating frequency provides useful performance margin for framing, checksums, and buffer management. Its 2.7 V to 5.5 V range supports both lower-voltage logic and conventional 5 V peripherals. For a communication product expected to remain on the market for many years, evaluate a currently supported MCU because the S08SH family is marked End of Life.

🧩

Home and Building Control Node

The MC9S08SH4CWJ fits a small building-control node that reads switches or sensors and drives relays, indicators, or communication transceivers. Its 17 I/O pins provide enough parallel digital connectivity for multiple zones, while the integrated ADC can supervise analog sensors and the analog comparator can implement threshold or fault detection. The 5 V-compatible upper supply limit simplifies integration with conventional control-logic boards, and the 20-pin SOIC package supports automated surface-mount assembly. Four kilobytes of flash can hold compact control firmware, but logging and network protocol stacks may require the 8 KB variant. Consider the End of Life designation during product planning, particularly for connected building equipment where field updates and long-term component continuity are important.

📱

Battery-Powered Data Logger

The MC9S08SH4CWJ is appropriate for a low-duty-cycle battery-powered data logger when firmware size is modest and the controller must combine sensing with serial storage or communications. The low-power requirement is primarily a system-design issue, so the MCU should be placed into its available sleep or stop modes between samples. Its 10-bit ADC supports proportional sensor readings, while SCI, SPI, or I²C can connect to a memory device or radio module. The 4 KB flash limit must be assessed against code size, event tables, and update requirements; MC9S08SH8CWJ provides twice the program storage when additional firmware is unavoidable. Confirm sleep-mode current and analog accuracy for the chosen operating mode. For new battery products, favor a supported low-power platform rather than an end-of-life MCU.

🔧

Compact Motor or Actuator Control

The MC9S08SH4CWJ can coordinate a compact actuator controller when the system requires digital sequencing, sensor monitoring, and a modest amount of custom control logic rather than a sophisticated real-time motor-control algorithm. Its 40 MHz S08 core supports fast state-machine execution, the comparator can monitor a feedback threshold, and the ADC can sample an analog command or sensor. Seventeen I/O pins provide outputs for drivers or indicators and inputs for position or limit switches. The 2.7 V to 5.5 V supply range offers flexibility in mixed-voltage designs, subject to careful input-level design. Use appropriate transistor, driver, flyback, and protection circuits around inductive loads rather than driving them directly from MCU pins. Validate timing and worst-case latency against the actuator's safety requirements.

Buod ng mga Inirekomendang Produkto

MC9S08SH8CWJ NXP Semiconductors Ginagamit sa: Industrial Sensor Controller, Digital Temperature Measurement, Home and Building Control Node, Battery-Powered Data Logger MC9S08SH2CWJ Lower-flash same-family controller option Ginagamit sa: Industrial Sensor Controller, Home and Building Control Node MC9S08JS8LCWJ S08-family evaluation candidate with 8 KB flash Ginagamit sa: Digital Temperature Measurement, Compact Motor or Actuator Control MC9S08SH8MWJ NXP Semiconductors Ginagamit sa: Communication Interface Module, Compact Motor or Actuator Control MC9S08SH4CWJR NXP Semiconductors Ginagamit sa: Communication Interface Module, Battery-Powered Data Logger
What is the MC9S08SH4CWJ?
The MC9S08SH4CWJ is an NXP Semiconductors 8-bit S08 microcontroller with a maximum clock frequency of 40 MHz, 4 KB of flash memory, 256 bytes of RAM, and a 20-pin SOIC package. According to the NXP product page, it includes SCI, SPI, I²C, a 10-bit ADC, an analog comparator, and a temperature sensor for compact embedded-control designs.
What are the key specifications of MC9S08SH4CWJ that engineers should know?
The MC9S08SH4CWJ combines an 8-bit S08 core operating up to 40 MHz with 4 KB of flash, 256 bytes of RAM, 17 I/O pins, and a 2.7 V to 5.5 V supply range. The NXP product information identifies a 20-pin SOIC package and integrated SCI, SPI, I²C, 10-bit ADC, analog comparator, and temperature-sensor functions. NXP labels the device as End of Life.
Where can I download the MC9S08SH4CWJ datasheet PDF?
The MC9S08SH4CWJ datasheet and product documents are available through the official NXP product page at https://www.nxp.com/part/MC9S08SH4CWJ. Use the Data Sheet link on that page for the authoritative electrical characteristics, pin descriptions, memory map, and timing information. NXP identifies the component as End of Life, so document revision status should be checked before using it in a new design.
Where can I find the MC9S08SH4CWJ pinout?
Use the pin-description table and package drawing in the NXP MC9S08SH4CWJ datasheet for authoritative assignments. The component uses a 20-pin SOIC package with 17 I/O pins, but the complete pin names and alternate-function details are not reproduced on this page. Assign PCB nets directly from the manufacturer diagram to avoid mismapping power, ground, programming, communication, or analog functions.
Is the MC9S08SH4CWJ currently in production?
No. NXP marks MC9S08SH4CWJ as End of Life on its official product page. The device may still be obtainable for maintenance or legacy-production needs, but engineers should not assume new production availability. Before ordering, request current supply, minimum-order quantity, remaining-life, and lifecycle information through the Request a Quote form on this page.
Where can I buy MC9S08SH4CWJ online?
Use the Request a Quote form on this page to request MC9S08SH4CWJ availability, current pricing, minimum-order quantity, and lead time. Because NXP labels this MCU End of Life, supply status can change with inventory and purchasing volume. A formal quotation is more useful than a generic stock indication because it can reflect the exact package, quantity, and shipment condition required for your production plan.
What is the price of MC9S08SH4CWJ?
Current commercial pricing for the end-of-life MC9S08SH4CWJ should be requested through the Request a Quote form on this page. The form allows the quantity and product parameters to be considered before a quotation is issued. Because availability may depend on remaining factory inventory and order size, a binding quotation provides more dependable procurement information than a historical catalog amount.
What is the lead time for MC9S08SH4CWJ?
The lead time for MC9S08SH4CWJ must be confirmed for the requested quantity through the Request a Quote form on this page. NXP identifies the part as End of Life, and lead time can vary with available inventory, manufacturing status, order volume, and packaging requirements. State the required quantity and date on the quote request so the commercial response reflects your actual build schedule.
Is MC9S08SH4CWJ in stock?
Stock availability for MC9S08SH4CWJ should be confirmed through the Request a Quote form on this page. NXP marks the MCU as End of Life, so inventory may be limited, fragmented, or reserved for previously committed orders. Request a written availability statement for the quantity you need, including the manufacturer name, package, date code, and any traceability requirements.
MC9S08SH4CWJ vs MC9S08SH8CWJ - which is better for a new design?
Choose MC9S08SH8CWJ when 8 KB of flash is useful and its 20-pin SOIC footprint remains compatible; it provides twice the flash memory of the 4 KB MC9S08SH4CWJ. The MC9S08SH4CWJ remains appropriate when 4 KB is sufficient or when an exact installed part must be preserved. Both belong to the end-of-life S08SH family, so longevity and software-tool support also affect the decision.
What is the difference between MC9S08SH4CWJ and MC9S08SH8CWJ?
The principal confirmed difference is flash capacity: MC9S08SH8CWJ provides 8 KB compared with 4 KB on MC9S08SH4CWJ. Both are S08 8-bit microcontrollers associated with the 20-pin SOIC class and 40 MHz maximum operating frequency. The larger-flash device can hold more firmware and data, while the target part may be preferable for an unchanged legacy design that already fits within 4 KB.
When should I choose MC9S08SH4CWJ over a larger S08SH device?
Choose MC9S08SH4CWJ when the application fits within 4 KB of flash, the 2.7 V to 5.5 V operating range is sufficient, and retaining an existing 20-pin SOIC layout simplifies lifecycle maintenance. Select a larger-flash S08SH option when firmware growth, tables, diagnostics, or communication code require more program memory. Neither choice avoids the family's End of Life status, so future-proofing requirements should be assessed before production.
Is MC9S08SH4CWJ suitable for a 5 V embedded-control application?
Yes, the MC9S08SH4CWJ is suitable for a 5 V embedded-control application because its stated operating supply range is 2.7 V to 5.5 V. Its 17 I/O pins, 10-bit ADC, analog comparator, and serial interfaces support sensor input, threshold detection, and communications. Ensure that every attached peripheral also tolerates 5 V and account for the MCU's End of Life status in the product plan.
What can replace MC9S08SH4CWJ?
The closest documented same-family alternatives include MC9S08SH8CWJ, MC9S08SH8MWJ, and MC9S08JS8LCWJ, which share the broader 20-pin S08-class footprint but differ in flash capacity, temperature grade, or device family. These alternatives must be checked for exact pinout, memory map, peripherals, and firmware compatibility. Because the target is End of Life, a board redesign may be more reliable than a simple substitution.
Is MC9S08SH4CWJ the same as MC9S08SH4CWJR?
No. MC9S08SH4CWJR is the tape-and-reel orderable form associated with MC9S08SH4CWJ, while MC9S08SH4CWJ is the tube-form ordering designation. Their device characteristics and pinout are intended to be the same, but the physical packing differs. Verify the assembly process and incoming-product requirements rather than treating the suffix change as an electrical upgrade.
Can MC9S08JS8LCWJ replace MC9S08SH4CWJ?
MC9S08JS8LCWJ is a candidate for evaluation, not an unconditional drop-in replacement. It appears in the S08SH and S08SG compatibility context and offers 8 KB rather than 4 KB of flash, but the exact peripheral set, pin assignments, clock behavior, memory map, and software configuration must be checked before substitution. Preserve the original footprint only after a complete schematic and firmware review.
What is the best Microchip Technology equivalent for MC9S08SH4CWJ?
No verified Microchip Technology cross-reference candidate was identified for MC9S08SH4CWJ, so a pin-compatible replacement should not be asserted. A cross-manufacturer replacement would require matching the 20-pin SOIC footprint, 2.7 V to 5.5 V supply range, memory requirements, ADC characteristics, and communication peripherals. Treat any cross-brand proposal as a redesign candidate until its timing and pin-level compatibility are independently confirmed.

Impormasyon ng Talumpati sa Engineering for MC9S08SH4CWJ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose MC9S08SH4CWJ for maintenance or constrained new builds that fit within 4 KB of flash and require a 40 MHz 8-bit S08 controller with 17 I/O pins, a 10-bit ADC, and mixed serial interfaces in a 20-pin SOIC footprint. Choose MC9S08SH8CWJ when firmware, diagnostics, logging, or protocol code requires 8 KB; its extra program space can eliminate a memory-capacity redesign while retaining the same family and package class. MC9S08SH4CWJR is appropriate when the same electrical device is needed in tape-and-reel packaging rather than tube form. Evaluate MC9S08SH8MWJ and MC9S08JS8LCWJ only after checking temperature grade, pin assignment, peripherals, memory map, and software compatibility. For a product expected to remain on sale for many years, the End of Life designation is a decisive concern, and a currently supported MCU family may offer a better long-term path despite requiring more redesign.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto MC9S08SH8CWJ MC9S08SH8MWJ MC9S08JS8LCWJ MC9S08SH4CWJR MC9S08SH2CWJ
Package 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC 20-pin SOIC
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Flash Memory 4 KB 8 KB 8 KB 8 KB 4 KB 2 KB
Ordering Packing Tube Tube Tube Tube Tape and reel Tube

Pangunahing mga Pagkakaiba

  • Lower flash footprint for compact control firmware (kumpara saMC9S08SH8CWJ)
  • Exact electrical configuration for legacy production (kumpara saMC9S08SH4CWJR)
  • Lower-memory option preserves the same S08SH architecture class (kumpara saMC9S08SH2CWJ)

Talaan ng Disenyo

Do not treat the R suffix in MC9S08SH4CWJR as a different electrical grade. It identifies a tape-and-reel orderable packaging form, whereas MC9S08SH4CWJ is the tube form. Select the suffix according to the board assembly process, and confirm pin, marking, and device specifications against the NXP ordering information before approving either purchasing code.

Design the supply network for the stated 2.7 V to 5.5 V operating range rather than assuming every 5 V application has identical rail tolerance. Place the regulator's bypass capacitors close to the MCU supply pins, maintain the required capacitor type and effective capacitance from the manufacturer guidance, and keep sensitive analog and communication returns away from switching-node currents. Verify brownout, startup, and peak-current behavior at the lowest intended input voltage.

Use the 20-pin SOIC footprint and preserve the manufacturer's pin-numbering orientation. Confirm programming, reset, clock, ground, and supply connections from the pin-description table before routing. In mixed-signal equipment, separate the analog input path from digital return currents and place the ADC reference source close to the MCU with a quiet ground connection. Avoid adding test pads or routed switching nodes adjacent to high-impedance sensor inputs.

The target is marked End of Life, so firmware and supply planning are as important as electrical compatibility. Before adopting MC9S08SH8CWJ or another related device, compare the complete pin description, peripheral set, memory map, reset behavior, clock limits, and development-tool requirements. A larger-flash alternative may solve a code-size problem but does not by itself establish that existing software or PCB nets can be reused unchanged.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

NXP identifies the product as End of Life. RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not confirmed in the product information and are therefore recorded as unknown.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

MC9S08SH4CWJ datasheet MC9S08SH4CWJ datasheet pdf MC9S08SH4CWJ pinout MC9S08SH4CWJ specifications MC9S08SH4CWJ equivalent MC9S08SH4CWJ replacement MC9S08SH4CWJ drop-in replacement MC9S08SH4CWJ price MC9S08SH4CWJ stock NXP MC9S08SH4CWJ MC9S08SH4CWJ vs MC9S08SH8CWJ MC9S08SH4CWJ 20-pin SOIC

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors MC9S08SH4CWJ MC9S08SH8CWJ MC9S08SH8MWJ MC9S08JS8LCWJ MC9S08SH4CWJR MC9S08SH2CWJ S08 8-bit microcontroller embedded controller semiconductor SCI SPI I²C 10-bit ADC analog comparator temperature sensor 40 MHz 4 KB flash 256 B RAM 20-pin SOIC surface mount industrial control digital temperature measurement serial communication module
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ