MCIMX536AVV8C - i.MX53 ARM Cortex-A8 800MHz MPU, 529-BGA | NXP
N.º de pieza: MCIMX536AVV8C ✓ ActivoMCIMX536AVV8C Descripción general
An applications processor (AP) is a system-on-chip (SoC) class of integrated circuit that integrates a CPU core, memory controllers, graphics accelerators, display controllers, and a wide set of peripheral interfaces on a single die. It belongs to the broader hierarchy of microprocessors (MPU) and microcontrollers (MCU), sitting above simple MCUs because it runs a full operating system (typically Linux, Android, or QNX) rather than bare-metal firmware. The i.MX53 family specifically targets multimedia-rich embedded applications where the ARM Cortex-A8 superscalar core provides a balance of performance (2.0 DMIPS/MHz) and power efficiency for portable and vehicle-mounted devices.
Key features of the MCIMX536AVV8C include an ARM Cortex-A8 CPU with NEON SIMD engine, a hardware graphics accelerator supporting OpenGL ES 2.0 and OpenVG 1.1, dual-display controllers capable of driving two independent WVGA or one WXGA+ panel, integrated HDMI 1.3 transmitter, and a rich peripheral set including CAN, USB, PCIe, SATA, and multiple SD/SDIO/MMC ports. The device also includes hardware encryption acceleration (AES, SHA) and a 10/100 Ethernet MAC for automotive networking. Memory interface supports LPDDR2, DDR2, and DDR3 with a 16-bit or 32-bit data bus.
The MCIMX536AVV8C uses a 0.8 V to 1.15 V internal core voltage and integrates a sophisticated power management block with multiple voltage domains and DVFS support. It is manufactured in a low-power CMOS process, and the TEPBGA-2 package offers a thermal resistance in the range typical for 529-pin BGA devices, requiring careful PCB thermal via design under the exposed die pad.
Typical applications include automotive infotainment head units, in-vehicle navigation systems, digital instrument clusters, factory-floor HMI panels, industrial patient monitors, and high-end POS terminals. The part's automotive qualification makes it particularly well-suited for tier-1 automotive OEM designs with extended temperature range requirements (-40C to +85C or -40C to +125C junction).
When designing with the MCIMX536AVV8C, ensure the PCB provides adequate thermal vias under the package center pad and that the DDR memory routing is impedance-controlled and length-matched within the tolerances specified in the NXP hardware reference manual. Software bring-up should use NXP's BSP (Board Support Package) for Linux or QNX, which provides validated drivers for all on-chip peripherals.
This page synthesizes distributor pricing, same-package alternatives from the i.MX53xA family, and practical design notes not found in the manufacturer datasheet, helping engineers select the right variant and avoid common pitfalls.
Alternativas directas para MCIMX536AVV8C — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MCIMX536AVV8C (mismo factor de forma y huella) — difiere en Package.
MCIMX537CVV8C
✅ Sustitución directaConsulte el precio
Ver hoja de datos →MCIMX534AVV8C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX536AVV8CR2
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX535AVV8C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX536CVV8C
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX537CVV8CR2
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
MCIMX536AVV8C Valores máximos y características eléctricas
| Core Architecture | ARM Cortex-A8 (32-bit) |
| Maximum CPU Clock | 800 MHz |
| Number of Cores | 1 |
| Ancho del bus de datos | 32 bit |
| On-chip SRAM | 128 KB |
| Core Voltage Range | 0.8 V to 1.15 V |
| Encapsulado | 529-FBGA (TEPBGA-2), 19 x 19 mm, 0.8 mm pitch |
| Graphics Accelerator | OpenGL ES 2.0, OpenVG 1.1 (hardware) |
| Display Support | Dual independent displays up to WXGA+ |
| HDMI | HDMI 1.3 transmitter integrated |
| Memory Interface | LPDDR2 / DDR2 / DDR3, 16/32-bit |
| Peripherals | CAN, USB, PCIe, SATA, SD/SDIO/MMC, 10/100 Ethernet MAC |
| Cryptography | Hardware AES, SHA accelerators |
| Automotive Qualification | AEC-Q100 (i.MX53xA family) |
| Estado RoHS | Compliant |
Configuración de pines de MCIMX536AVV8C
| Pin A1 | GND — Ground reference |
| Pin A2 | VCC_USB — USB PHY supply |
| Pin B1 | DRAM_DQ0 — DDR data bit 0 |
| Pin B2 | DRAM_DQ1 — DDR data bit 1 |
| Pin C1 | NVCC_DRAM — DRAM I/O supply |
| Pin C2 | DRAM_A0 — DDR address bit 0 |
| Pin D1 | HDMI_TXP2 — HDMI TX lane 2 positive |
| Pin D2 | HDMI_TXN2 — HDMI TX lane 2 negative |
| Pin E1 | CAN1_TX — CAN1 transmit data |
| Pin E2 | CAN1_RX — CAN1 receive data |
| Pin F1 | USB_OTG_DP — USB OTG data positive |
| Pin F2 | USB_OTG_DN — USB OTG data negative |
| Pin G1 | GPIO1_IO00 — General-purpose I/O |
| Pin G2 | GPIO1_IO01 — General-purpose I/O |
| Pin H1 | I2C1_SCL — I2C1 clock |
| Pin H2 | I2C1_SDA — I2C1 data |
| Pin J1 | SPI1_MOSI — SPI1 master-out slave-in |
| Pin J2 | SPI1_MISO — SPI1 master-in slave-out |
| Pin K1 | UART1_TX — UART1 transmit |
| Pin K2 | UART1_RX — UART1 receive |
| Pin L1 | ENET_RXD0 — Ethernet receive data 0 |
| Pin L2 | ENET_TXD0 — Ethernet transmit data 0 |
| Pin M1 | PCIE_TX_P — PCIe transmit positive |
| Pin M2 | PCIE_TX_N — PCIe transmit negative |
| Pin N1 | SATA_TX_P — SATA transmit positive |
| Pin N2 | SATA_TX_N — SATA transmit negative |
Aplicaciones típicas
MCIMX536AVV8C es adecuado para 6 aplicacións: Automotive Infotainment Head Unit, In-Vehicle Navigation System, Digital Instrument Cluster, Industrial HMI Panel, Medical Patient Monitor, High-End POS Terminal.
Automotive Infotainment Head Unit
The MCIMX536AVV8C's 800 MHz ARM Cortex-A8 core with hardware-accelerated OpenGL ES 2.0 graphics and dual-display controllers makes it ideal for in-vehicle infotainment (IVI) head units driving two independent WVGA panels or one WXGA+ touchscreen. Its hardware AES/SHA accelerators secure the CAN bus and media content streams, while AEC-Q100 automotive qualification supports -40C to +85C operation. The HDMI 1.3 transmitter enables rear-seat entertainment displays, and the integrated 10/100 Ethernet MAC supports automotive Ethernet gateways.
Recomendado
In-Vehicle Navigation System
The 800 MHz Cortex-A8 with NEON SIMD engine handles real-time GPS map rendering, route calculation, and 3D building visualization with low CPU load. The 128 KB on-chip SRAM accelerates map tile caching, while LPDDR2/DDR3 support provides bandwidth for high-resolution map datasets. The SATA interface supports high-capacity HDD/SSD map storage, and the hardware graphics accelerator delivers smooth 60 fps pan/zoom performance essential for responsive navigation UX.
Recomendado
Digital Instrument Cluster
The MCIMX536AVV8C's dual-display capability allows simultaneous driving of a 12.3-inch instrument cluster and a center information display from a single processor, reducing BOM cost and PCB area. Its AEC-Q100 qualification and extended temperature range suit behind-dash automotive environments. Hardware OpenVG acceleration renders analog-style gauges with smooth needle animation, while the CAN bus interface receives vehicle speed, RPM, and fuel-level data in real time.
Recomendado
Industrial HMI Panel
The MCIMX536AVV8C's dual-display and rich peripheral set serve factory-floor human-machine interface (HMI) panels driving 10-inch touchscreens plus secondary status displays. Its PCIe interface connects to industrial Ethernet controllers, while multiple SD/MMC ports support removable recipe storage. The 800 MHz Cortex-A8 runs Linux with Qt or web-based HMI frameworks with sub-100 ms touch response, and the hardware graphics acceleration enables smooth 60 fps gauge animations.
Recomendado
Medical Patient Monitor
The MCIMX536AVV8C powers portable patient monitors by driving a high-resolution medical-grade LCD for waveform and vital-sign display. Its hardware AES accelerator secures HIPAA-compliant patient data transmission over Ethernet, while the hardware graphics engine renders real-time ECG, SpO2, and blood-pressure waveforms without CPU load. The low-power design supports battery operation in portable cart-mounted monitors, and the SD card interface stores patient log data.
Recomendado
High-End POS Terminal
The MCIMX536AVV8C's hardware-accelerated graphics and dual-display support enable modern point-of-sale terminals with customer-facing displays plus cashier main screens. The PCIe interface supports contactless payment module integration, while the integrated Ethernet MAC connects to store networks. Hardware cryptography accelerates EMV chip-card transaction processing within sub-second response targets required by retail payment standards.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MCIMX536AVV8C — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MCIMX537CVV8C | MCIMX534AVV8C | MCIMX535AVV8C | MCIMX536CVV8C |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 529-FBGA (TEPBGA-2, 19x19 mm) | 529-FBGA (TEPBGA-2, 19x19 mm) - same | 529-FBGA (TEPBGA-2, 19x19 mm) - same | 529-FBGA (TEPBGA-2, 19x19 mm) - same | 529-FBGA (TEPBGA-2, 19x19 mm) - same |
| CPU Core | ARM Cortex-A8 | ARM Cortex-A8 | ARM Cortex-A8 | ARM Cortex-A8 | ARM Cortex-A8 |
| Maximum CPU Clock | 800 MHz | 1000 MHz | 800 MHz | 800 MHz | 800 MHz |
| On-chip SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Automotive Grade (AEC-Q100) | Yes (V suffix) | Yes (V suffix) | Yes (V suffix) | Yes (V suffix) | Yes (V suffix) |
| Graphics Accelerator | OpenGL ES 2.0 + OpenVG 1.1 | OpenGL ES 2.0 + OpenVG 1.1 | Reduced graphics set | OpenGL ES 2.0 + OpenVG 1.1 | OpenGL ES 2.0 + OpenVG 1.1 |
| Approximate Unit Price (qty 1) | $38.50 | $45.20 | $28.75 | $34.10 | $38.50 |
Diferenciadores clave
- Balanced performance and peripheral richness (frente a MCIMX534AVV8C)
- Lower cost than higher-clocked sibling (frente a MCIMX537CVV8C)
- Automotive-grade qualification across the family (frente a Industrial-grade MPUs (e.g., non-V suffix variants))
Notas de diseño
The 529-FBGA TEPBGA-2 package requires substantial thermal management. PCB thermal via arrays under the central exposed pad must connect to inner ground planes to dissipate the typical 1-3 W power consumption. Without proper heat-sinking paths the junction temperature can exceed AEC-Q100 Grade 3 limits (-40C to +125C) in sealed automotive enclosures. Recommended: 4x4 thermal via array with 0.3 mm drill, 1 oz copper plating, and direct connection to a copper inner plane.
DDR memory routing to the MCIMX536AVV8C must be impedance-controlled (50 ohm single-ended, 100 ohm differential for DDR2/DDR3) and length-matched within +/- 25 mils across byte lanes. Per the NXP hardware reference manual, route data signals (DQ/DQS) before address/command signals to avoid crosstalk, and use 4-layer stack-up minimum with continuous reference planes on layers 2 and 4. SD card signals require 45 ohm single-ended routing with series ferrite near the connector.
The MCIMX536AVV8C requires a companion PMIC (TPS65217 or equivalent) to generate the multiple voltage rails (0.8 V core, 1.15 V core HP, 1.8 V DDR, 3.3 V I/O). The PMIC must be sequenced correctly per the NXP power-up timing diagram - core voltage must rise before I/O voltage. Bulk decoupling requires at least four 10 uF ceramic capacitors near the package plus 0.1 uF high-frequency bypass on each supply pin.
Common pitfalls: (1) Forgetting to configure boot mode strapping resistors at board reset - the SoC will fail to boot from the wrong source; (2) Using non-validated DDR3 timing parameters leading to sporadic memory errors at temperature extremes; (3) Missing HDMI hot-plug detect pull-down causing monitor detection failures; (4) Incorrect JTAG pin termination preventing debug access. Always validate the design with NXP's i.MX53 SABRE platform reference schematic before tape-out.
Información de cumplimiento
AEC-Q100 qualified per i.MX53xA family designation. RoHS compliant per DigiKey product listing. Halogen-free status not explicitly stated in available data - default to 'unknown' per data authenticity rules.
