Microchip Technology

MCP3301T-BI/SN - 13-Bit Differential SAR ADC | Microchip

N.º de pieza: MCP3301T-BI/SN ✓ Activo
8-pin SOIC Package
MOQ: 1 |

MCP3301T-BI/SN Descripción general

The Microchip Technology MCP3301T-BI/SN is a 13-bit, single-channel, differential-input successive-approximation analog-to-digital converter in an 8-pin SOIC package. It combines a full-differential input architecture with an SPI-compatible serial interface and low-power operation for battery-powered instrumentation and remote data-acquisition systems. The tape-and-reel ordering code is designed for automated production assembly.

An analog-to-digital converter, or ADC, converts an analog voltage into a numeric value for processing by a microcontroller or other digital controller. The MCP3301 belongs to the ADC and DAC category within the broader semiconductor and data-converter hierarchy. Its differential input is useful when the source has a centered or shifting reference point and a dedicated VREF+ and VREF- connection supports common-mode input-range control.

The MCP3301 uses successive-approximation conversion and provides 13-bit resolution. This resolution supports 8,193 distinct numerical codes across an ideal 13-bit transfer function. The single-channel architecture reduces analog routing requirements compared with a multiplexed converter, while the SPI serial interface allows a host processor to obtain conversion results using a compact command-and-data sequence.

Low power consumption is a defining feature of the MCP3301, making it suitable for portable measurement systems where every milliamp of average demand can shorten operating time between battery replacements. The manufacturer identifies the device for battery-powered systems and remote data acquisition. Its 8-SOIC package is compact, widely supported by PCB assembly equipment, and suitable for prototypes as well as production circuits.

Typical applications include battery-powered environmental monitoring, precision control systems, laboratory measurement equipment, industrial sensor interfaces, portable instrumentation, and remote telemetry nodes. In these systems, the converter can digitize a differential sensor output and present the result to a microcontroller through its serial interface, reducing analog cabling requirements and making the measurement path less susceptible to common-mode interference.

When designing around the MCP3301T-BI/SN, establish the reference voltage and analog input range before selecting gain and sensor excitation. Keep the reference and analog traces compact, route them away from fast switching nodes, and use a quiet ground reference to maximize conversion accuracy. The SPI clock and digital-control traces should remain short enough to prevent timing or signal-integrity problems at the system clock.

This product overview combines the manufacturer feature description, ordering information, package details, and practical guidance for battery-powered and remote data-acquisition designs. It also distinguishes the available family alternative and explains when its standard package configuration is preferable to the tape-and-reel production ordering code.

Alternativas directas para MCP3301T-BI/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP3301T-BI/SN (mismo factor de forma y huella) — difiere en Converter Type, Package, Digital Interface, Input Architecture, Maximum Conversion Rate.

Microchip Technology
Converter Type: Single-channel ADC
Package: 8-pin SOIC, 150 mil
Digital Interface: SPI
Microchip Technology
Converter Type: 13-bit successive-approximation ADC
Package: 14-pin SOIC
Maximum Conversion Rate: 100 kHz

MCP3301-BI/SN

✅ Sustitución directa
📦 8-pin SOIC
Same 13-bit differential SAR ADC and 8-pin SOIC configuration; ordering format differs, with MCP3301T-BI/SN specified for tape-and-reel delivery

📋 Alternativa de referencia (no en el catálogo)

MCP3301T-BI/SN Valores máximos y características eléctricas

Converter Type Successive-approximation ADC
Resolución 13 bit
Number of Input Channels 1 channel
Input Architecture Fully differential
Digital Interface SPI-compatible serial interface
Encapsulado 8-pin SOIC
Package Shape Rectangular
Terminal Form Gull wing
Tipo de montaje Surface mount
Temperature Grade Industrial
Delivery Format Tape & reel

Guía de configuración de pines de MCP3301T-BI/SN rectangular

Configuración de pines para MCP3301T-BI/SN (encapsulado rectangular). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado rectangular para MCP3301T-BI/SN

No hay datos detallados de patillaje disponibles para MCP3301T-BI/SN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP3301T-BI/SN es adecuado para 6 aplicacións: Battery-Powered Environmental Monitoring, Remote Data Acquisition, Precision Industrial Sensor Interface, Portable Test and Measurement, Battery-Powered Medical Monitor, Automated Control System.

🧩

Battery-Powered Environmental Monitoring

The MCP3301T-BI/SN suits a battery-powered environmental monitor because it combines a 13-bit SAR ADC with low power consumption in an 8-pin SOIC package. Its single fully differential channel can digitize a bridge or ratiometric sensor while rejecting common-mode variation. Connect the sensor to the differential input and establish the reference range around the expected signal level. The differential connection reduces the amount of external analog switching required, while the 13-bit resolution provides 8,193 ideal codes for representing the measurement. Confirm the sensor excitation, reference voltage, input range, and conversion timing in the manufacturer datasheet before sizing external resistors and capacitors.

🌐

Remote Data Acquisition

The MCP3301T-BI/SN is appropriate for a remote data-acquisition node where power availability is constrained and measurements arrive from a distant sensor. Its fully differential 13-bit input supports a 1-channel measurement path, while the SPI-compatible interface provides a straightforward connection to a microcontroller. Place the converter near the sensor connector to minimize analog trace length, and route the differential pair away from switching and radio-related circuitry. The low-power operation identified by Microchip Technology helps preserve battery life, while 8,193 ideal resolution codes support useful signal detail. Confirm the reference configuration and serial timing against the manufacturer datasheet for the deployed host processor.

🏭

Precision Industrial Sensor Interface

The MCP3301T-BI/SN can serve as the measurement front end for an industrial sensor interface requiring a fully differential input and 13-bit conversion resolution. Differential excitation and sensing reduce sensitivity to shared ground shifts, particularly when the transducer is located away from the controller. The ADC uses one SAR channel, which simplifies the analog path for temperature, pressure, strain, or level sensing. Maintain a low-impedance reference and provide clean return paths beneath the analog section. Because the operating and accuracy limits determine usable sensitivity, use the manufacturer electrical-characteristics table to establish reference range, noise performance, and allowable source impedance.

🔧

Portable Test and Measurement

The MCP3301T-BI/SN is well suited to portable test equipment that digitizes a low-level differential measurement and reports it through a host controller. Its 13-bit resolution provides 8,193 ideal code levels, while the single SAR channel permits a compact analog front end. Use the device for a controlled probe, transducer, or low-voltage source and preserve a defined differential input range around the selected reference voltage. Keep the SPI traces short, provide a stable local reference, and separate sensitive analog routing from display, switching, and power-converter paths. The manufacturer datasheet should be used to establish input impedance, sampling behavior, acquisition timing, and accuracy for the required measurement bandwidth.

💊

Battery-Powered Medical Monitor

The MCP3301T-BI/SN can support a battery-powered medical monitoring module that measures a differential sensor signal in a compact assembly. The 13-bit SAR conversion, low-power operation, and single fully differential input reduce analog complexity while preserving useful measurement resolution. A differential sensor interface can reduce common-mode pickup when the transducer and converter share a controlled reference point. Use medically appropriate isolation, protection, and grounding methods as required by the complete system design rather than relying on the ADC alone for safety. Confirm reference accuracy, input range, timing, and operating limits against the manufacturer datasheet, and validate the assembled signal chain for the intended measurement bandwidth.

⚡

Automated Control System

The MCP3301T-BI/SN is useful in an automated control system that needs a compact differential measurement channel beside a digital controller. Its 13-bit resolution can represent a process or feedback value with 8,193 ideal numerical levels, while the SPI-compatible interface supports deterministic communication with the controller. Place the ADC close to the sensing circuitry and use a dedicated analog reference to improve repeatability. Separate the SPI clock and control signals from sensitive input and reference routing to limit coupling. The single-channel SAR architecture makes it practical for one critical feedback loop, although a multiplexed ADC may be preferable when many lower-speed inputs must be scanned. Verify acquisition timing and reference requirements in the manufacturer datasheet.

What is the MCP3301T-BI/SN?
The MCP3301T-BI/SN is a 13-bit, single-channel, fully differential successive-approximation ADC with an SPI-compatible serial interface. It is packaged in an 8-pin SOIC and supplied in tape-and-reel format. According to the Microchip Technology product page, its combination of differential input, low power consumption, and a small package suits battery-powered systems and remote data-acquisition equipment.
How many bits of resolution does the MCP3301T-BI/SN have?
The MCP3301T-BI/SN provides 13-bit resolution, corresponding to 8,193 ideal numerical codes across a complete conversion range. The manufacturer describes the MCP3301 as a 13-bit analog-to-digital converter with one differential input channel. Use the pin-description and electrical-characteristics tables in the manufacturer datasheet when setting the reference voltage and calculating the voltage represented by one least-significant bit.
What type of ADC is the MCP3301T-BI/SN?
The MCP3301T-BI/SN is a successive-approximation, or SAR, analog-to-digital converter. According to the DigiKey product description, it is a 13-bit ADC with one input, SAR conversion, and an 8-SOIC package. The manufacturer product page identifies a fully differential input architecture and an SPI-compatible serial interface for communicating conversion results to a digital controller.
Where can I download the MCP3301T-BI/SN datasheet PDF?
The MCP3301T-BI/SN datasheet and product resources are available from the official Microchip Technology MCP3301 product page. The manufacturer page is the preferred starting point because it provides the current device documentation and ordering information. Use the pin-description table and electrical-characteristics sections in the manufacturer datasheet for package assignments, reference requirements, timing, and accuracy limits.
Where can I find the MCP3301T-BI/SN pinout?
The MCP3301T-BI/SN uses an 8-pin SOIC package, and its pin assignments are shown in the pin-description table of the manufacturer datasheet. The DigiKey listing independently identifies the device as an 8-SOIC. Use that table when assigning CS, DIN, DOUT, SCLK, ground, reference, and supply connections; do not infer pin functions solely from a distributor package thumbnail.
Is the MCP3301T-BI/SN suitable for battery-powered systems?
Yes, the MCP3301T-BI/SN is suitable for battery-powered systems because the manufacturer specifically highlights its low power consumption. Its 13-bit differential SAR conversion and single-channel architecture can support compact remote sensing equipment without requiring a multiplexed converter. Confirm the operating supply range, active current, and shutdown behavior in the manufacturer datasheet for the intended battery voltage and duty cycle.
What is the difference between MCP3301T-BI/SN and MCP3301-BI/SN?
Both parts identify the same MCP3301 13-bit differential-input, single-channel SAR ADC family in an 8-pin SOIC configuration, but their ordering suffixes indicate different delivery formats. The T version is supplied in tape-and-reel form for automated assembly, while the non-T version is the standard-family ordering form. Confirm reel quantity, carrier details, and the exact purchase configuration before treating the two order codes as interchangeable.
What can replace the MCP3301T-BI/SN?
MCP3301-BI/SN is the closest drop-in family alternative identified for the MCP3301T-BI/SN because both use the same 8-pin SOIC MCP3301 configuration and differ principally in ordering or delivery format. Its key parameters are therefore effectively identical for the standard MCP3301 implementation. If tape-and-reel handling is mandatory, verify the supplier configuration or order the T suffix directly.
Is MCP3301-BI/SN the same as MCP3301T-BI/SN?
MCP3301-BI/SN and MCP3301T-BI/SN belong to the same 13-bit, single-channel differential ADC family and use an 8-pin SOIC package. The T suffix identifies a tape-and-reel ordering configuration, while MCP3301-BI/SN is the standard family ordering code. They are functionally equivalent for the standard MCP3301 design, but procurement should confirm the required delivery format.
When should I choose MCP3301T-BI/SN over MCP3301-BI/SN?
Choose MCP3301T-BI/SN when the assembly process uses a pick-and-place machine and consumes components from a reel. Its 13-bit resolution, fully differential input, SPI-compatible interface, and 8-pin SOIC package match the standard MCP3301 family configuration. Choose MCP3301-BI/SN when the standard ordering format is acceptable and no tape-and-reel delivery requirement applies.
MCP3301T-BI/SN vs MCP3301-BI/SN: which is better for automated production?
The MCP3301T-BI/SN is generally the better choice for automated production because the T suffix denotes tape-and-reel packaging suitable for component placement equipment. MCP3301-BI/SN retains the same core 13-bit differential ADC architecture and 8-pin SOIC footprint, but it uses the standard ordering format. The deciding factor is therefore handling and assembly automation rather than conversion performance.
Where can I buy MCP3301T-BI/SN online?
Use the Request a Quote form on this page to request MCP3301T-BI/SN availability, order quantities, and current commercial terms. The manufacturer and distributor listings identify the exact MCP3301T-BI/SN order code in an 8-pin SOIC configuration. Submit the required quantity, reel quantity, and target delivery location so the quote can reflect the appropriate production configuration.
What is the price of MCP3301T-BI/SN?
Current pricing for MCP3301T-BI/SN depends on quantity, reel configuration, availability, and delivery terms. Use the Request a Quote form on this page to obtain the applicable unit and volume pricing for the exact MCP3301T-BI/SN order code. Include your production quantity and required ship-to location so the commercial response reflects the intended purchasing schedule.
What is the lead time and stock status of MCP3301T-BI/SN?
Request the current MCP3301T-BI/SN stock status and lead time through the Request a Quote form on this page. The listing identifies the exact tape-and-reel order code, but live availability can change with factory inventory, allocation, reel quantity, and demand. Provide your required quantity and delivery schedule for an actionable quotation.
What are the key specifications of MCP3301T-BI/SN that engineers should know?
The key specifications are 13-bit resolution, one fully differential input channel, successive-approximation conversion, an SPI-compatible serial interface, low-power operation, and an 8-pin SOIC package. According to the Microchip Technology product page, these characteristics suit battery-powered systems and remote data acquisition. Reference voltage, accuracy, timing, and supply-current limits should be taken from the manufacturer datasheet.
What is the best Microchip Technology equivalent for MCP3301T-BI/SN?
MCP3301-BI/SN is the best directly identified Microchip Technology family equivalent because it uses the same MCP3301 13-bit differential ADC configuration and 8-pin SOIC package. The primary distinction is the ordering format: MCP3301T-BI/SN is specified for tape-and-reel handling. Verify stock, packaging, reel quantity, and exact electrical requirements before finalizing a substitution.

Datos de referencia de ingeniería para MCP3301T-BI/SN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP3301T-BI/SN when your design requires the MCP3301’s 13-bit, single-channel fully differential SAR ADC and your assembly process consumes components from tape-and-reel reels. It is especially suitable for battery-powered environmental monitors, remote acquisition nodes, portable instruments, and industrial sensor interfaces. MCP3301-BI/SN is the appropriate alternative when the same electrical and package configuration is needed but the standard ordering format is acceptable. Both parts use an 8-pin SOIC footprint and share the same 13-bit differential ADC function, so the primary decision is delivery format rather than conversion performance. Before committing to either ordering code, verify the reference-voltage range, analog input limits, acquisition timing, and SPI details in the manufacturer datasheet. If the design requires multiple channels, bipolar input ranges, or substantially higher resolution, select a different converter instead of assuming this family can satisfy those requirements.

Comparación con alternativas

Parámetro Este producto MCP3301-BI/SN
Brand Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC
Converter Type Successive-approximation ADC Successive-approximation ADC
Resolution 13 bit 13 bit
Input Channels 1 differential input channel 1 differential input channel
Input Architecture Fully differential Fully differential
Digital Interface SPI-compatible serial interface SPI-compatible serial interface
Power Consumption Low-power operation Low-power operation
Temperature Grade Industrial Industrial
Delivery Format Tape & Reel Standard ordering format

Diferenciadores clave

  • Production-oriented tape-and-reel configuration (frente a MCP3301-BI/SN)
  • Single-channel differential measurement path (frente a MCP3301-BI/SN)
  • Compact SPI-connected conversion (frente a MCP3301-BI/SN)

Notas de diseño

Route the differential input pair as a compact, continuous pair from the sensor or signal source to the ADC, with a continuous reference plane beneath it. Keep the input path away from switching nodes, inductors, display signals, and high-current return paths. Place reference and input bypass components close to their associated pins. Differential routing helps preserve signal integrity, but the final impedance and spacing should follow the board stack-up and the manufacturer’s analog-layout recommendations.

Establish the reference-voltage range and analog input range before selecting external component values. A stable reference determines the conversion scale, so use a local reference network and decouple its supply connection near the ADC. Do not allow the differential input to exceed the limits defined in the manufacturer datasheet. When battery life is important, inspect both active and shutdown current for the host system’s complete measurement cycle rather than considering quiescent current alone.

Keep SPI clock, chip-select, and data traces short, and provide a continuous ground reference beneath the digital interface. Although the MCP3301 uses a simple serial interface, excessive clock loading or trace coupling can create timing margin problems in a compact system. Keep the converter away from switching regulators and high-speed memory. Follow the pin-description and timing tables in the manufacturer datasheet when matching clock polarity, edge timing, and input acquisition requirements.

Avoid treating the MCP3301T-BI/SN and MCP3301-BI/SN as having different conversion performance merely because their ordering codes differ. The meaningful engineering checks are the 13-bit differential SAR function, reference configuration, timing, accuracy, and package connections. Confirm that the selected ordering configuration matches the assembly process, especially when the PCB builder requires tape-and-reel delivery, and verify the exact pin assignments in the manufacturer datasheet.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

The industrial temperature grade and 8-pin SOIC construction are identified for the MCP3301T-BI/SN. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer’s current product documentation.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP3301T-BI/SN datasheet MCP3301T-BI/SN pinout MCP3301T-BI/SN datasheet pdf MCP3301T-BI/SN equivalent MCP3301T-BI/SN replacement MCP3301T-BI/SN price MCP3301T-BI/SN stock MCP3301T-BI/SN vs MCP3301-BI/SN MCP3301 13-bit differential ADC MCP3301 8-SOIC pinout MCP3301 battery powered data acquisition Microchip Technology MCP3301T-BI/SN

Componentes & términos relacionados

Microchip Technology MCP3301T-BI/SN MCP3301-BI/SN analog-to-digital converter ADC successive-approximation converter SAR ADC 13-bit resolution differential input SPI SPI-compatible serial interface data converter semiconductor 8-pin SOIC SOIC package family surface-mount technology SMD battery-powered systems remote data acquisition industrial sensor interface reference voltage low power consumption tape and reel packaging
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ