Microchip Technology

MCP3301T-CI/SN - 13-Bit 100 ksps Differential ADC | Microchip

N.º de pieza: MCP3301T-CI/SN ✓ Activo
4.5 V to 5.5 V Vdss 8-pin SOIC, 150 mil Package
MOQ: 1 |

MCP3301T-CI/SN Descripción general

The Microchip Technology MCP3301T-CI/SN is a 13-bit, single-channel, successive-approximation analog-to-digital converter with a fully differential input, an SPI serial interface, and a low-power design suitable for battery-powered and remote data-acquisition systems. It converts at up to 100 ksps, operates from a 4.5 V to 5.5 V supply, and accepts an external reference voltage from 400 mV to 5 V. The device is packaged in an 8-pin SOIC configuration.

An ADC is an analog-to-digital converter, a semiconductor that samples a continuous voltage and produces a corresponding digital code. The MCP3301 belongs to the data-converter IC hierarchy and specifically provides one differential input with 13-bit resolution. Differential operation means that the converter measures the voltage between two input nodes rather than measuring a single input relative to ground. This architecture is useful when the signal source is balanced or when common-mode noise must be rejected.

Key specifications include 13-bit resolution, a maximum conversion rate of 100 ksps, and a 4.5 V to 5.5 V supply range. The external reference can vary from 400 mV to 5 V, producing input-referred resolution between 98 µV and 1.22 mV. The SPI interface supports straightforward communication with microcontrollers, while the low-power characteristics suit portable instruments and distributed sensing nodes.

Internally, the MCP3301 uses a successive-approximation conversion process, charging an internal sample-and-hold capacitor before comparing the sampled voltage against its reference. The external reference defines the input range and therefore affects both conversion accuracy and code scaling. Designers must account for reference noise, input-source impedance, acquisition time, and SPI clock timing when interpreting the rated throughput.

Typical uses include battery-powered measurement equipment, industrial process monitoring, remote data acquisition, environmental sensors, and laboratory instruments. A differential sensor, current-sense amplifier, or low-level transducer can feed the ADC when its output voltage remains within the selected reference range. The converter is particularly appropriate where one analog channel is sufficient and low power consumption is more important than high channel count.

Place the reference and input networks close to the device, keep analog traces short, and provide a quiet reference source. Because the MCP3301 requires an external reference, reference stability can dominate the overall measurement accuracy. The 8-pin SOIC footprint simplifies assembly, but careful grounding and decoupling remain necessary to preserve the converter's low-noise performance.

This product page combines the core electrical characteristics, application guidance, comparison information, and practical design considerations needed to evaluate the MCP3301T-CI/SN for an SPI-based analog measurement design.

Alternativas directas para MCP3301T-CI/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP3301T-CI/SN (mismo factor de forma y huella) — difiere en Package, Converter Type, Digital Interface, Input Architecture, Resolution.

Microchip Technology
Package: 8-lead MSOP
Converter Type: Successive-approximation ADC
Input Architecture: Fully differential
Microchip Technology
Package: 8-pin SOIC
Converter Type: Successive-approximation ADC
Digital Interface: SPI-compatible serial interface

MCP3301T-BI/SN

✅ Sustitución directa
Microchip Technology
📦 8-pin SOIC
Successive-approximation ADC · 13 bit · 1 channel · Fully differential · SPI-compatible serial interface · 8-pin SOIC · Rectangular · Gull wing

Consulte el precio

Ver hoja de datos →

MCP3201T-CI/SN

✅ Sustitución directa
📦 8-pin SOIC
Resolution is 12 bits rather than 13 bits, a reduction of 1 bit or approximately 7.7% in code width, while retaining the single-channel SAR and SPI architecture.

📋 Alternativa de referencia (no en el catálogo)

MCP3201T-BI/SN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin SOIC
Uses 12-bit conversion rather than the MCP3301's 13-bit resolution and requires confirmation of ordering-code-specific supply and timing details.

📋 Alternativa de referencia (no en el catálogo)

MCP3201T-BI/MS

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin MSOP
Uses a narrower MSOP package and 12-bit conversion, so the physical land pattern must be verified against the 8-pin SOIC MCP3301T-CI/SN footprint.

📋 Alternativa de referencia (no en el catálogo)

MCP3301T-BI/MS

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 8-pin MSOP
Successive-approximation ADC · 13 bit · 1 channel · Fully differential · 100 kS/s · 4.5 V to 5.5 V · 50 nA typical · Approximately 78 dB

Consulte el precio

Ver hoja de datos →

MCP3301T-CI/SN Valores máximos y características eléctricas

Resolución 13 bits
Input Channels 1 channel
Input Architecture Fully differential input
Conversion Method Successive approximation (SAR)
Maximum Conversion Rate 100 ksps
Supply Voltage Range 4.5 V to 5.5 V
Reference Voltage Range 400 mV to 5 V
Input-Referred Resolution 98 µV to 1.22 mV
Digital Interface SPI
Encapsulado 8-pin SOIC, 150 mil
Rango de temperatura de funcionamiento -40 °C to +85 °C
Power Consumption Low power
Application Category Battery-powered and remote data-acquisition systems
Estado RoHS Compliant
Reference Implementation External voltage reference
Tipo de montaje Surface mount
Converter Type Single-channel ADC
Output Resolution 13 bits

Configuración de pines de MCP3301T-CI/SN

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 CS — Chip-select input for the SPI serial interface
Pin 2 DIN — Serial data input for conversion commands
Pin 3 DOUT — Serial data output carrying the conversion result
Pin 4 VSS — Negative supply and ground connection
Pin 5 VREF+ — Positive reference-voltage input
Pin 6 VIN- — Negative differential analog input
Pin 7 VIN+ — Positive differential analog input
Pin 8 VDD — Positive supply-voltage input

Aplicaciones típicas

MCP3301T-CI/SN es adecuado para 6 aplicacións: Battery-Powered Data Acquisition, Industrial Process Monitoring, Remote Environmental Sensing, Precision Current Measurement, Laboratory Instrument Front End, Portable Measurement Instrument.

🔋

Battery-Powered Data Acquisition

The MCP3301T-CI/SN fits battery-powered data-acquisition equipment because it combines a 13-bit resolution with low-power operation and a single differential analog channel. A microcontroller can initiate each conversion over SPI and read the result without operating multiple simultaneous input channels. The 4.5 V to 5.5 V supply range makes the device appropriate for regulated 5 V systems. External reference design, sensor excitation, and display or radio electronics should be evaluated separately because the ADC is only one element of the complete acquisition chain.

🏭

Industrial Process Monitoring

The MCP3301T-CI/SN is suitable for industrial process monitoring when a single low-level differential signal must be digitized close to the sensor or transmitter. Its fully differential input can accept the voltage difference between VIN+ and VIN-, reducing sensitivity to common-mode disturbance when the source is balanced. The 100 ksps maximum rate supports fast sampling, while 13-bit resolution gives more code levels than a 12-bit converter. Choose the external reference and input range to match the transducer output, and maintain the specified supply voltage.

🧩

Remote Environmental Sensing

The MCP3301T-CI/SN supports remote environmental sensing systems that measure one differential sensor signal while operating from a local 5 V supply. A bridge, thermocouple interface, or low-level pressure sensor can drive the differential inputs, and the MCU can read the 13-bit result through SPI. Low-power characteristics help manage overall instrument energy, but the external reference and sensor interface also need low-power states. Because the device has one input channel, multiplexed or simultaneous multi-channel measurement requires additional external switching or converters.

⚡

Precision Current Measurement

The MCP3301T-CI/SN can digitize the output of a current-sense amplifier when the amplifier provides a differential signal. The 13-bit resolution provides 8192 nominal code levels, while the fully differential input is well matched to shunt-amplifier outputs. The reference voltage determines the measurable span, so it should be selected without clipping normal current peaks. Input filtering, amplifier settling, and SPI timing must be coordinated to preserve accuracy at the maximum conversion rate of 100 ksps.

🖥️

Laboratory Instrument Front End

The MCP3301T-CI/SN is useful in a laboratory instrument front end when one precision analog channel must be converted for digital processing. The adjustable 400 mV to 5 V external reference supports both millivolt-level instrumentation and wider input ranges. The ADC's 13-bit result can feed calibration, curve fitting, or control algorithms over SPI. Accuracy is ultimately determined by reference stability, analog front-end noise, grounding, and calibration rather than resolution alone, so evaluate those elements together.

📱

Portable Measurement Instrument

The MCP3301T-CI/SN fits portable measurement instruments where a compact 8-pin SOIC converter can replace a larger or more complex data-acquisition implementation. Its single differential input simplifies analog routing, while the SPI interface allows connection to a compact microcontroller. The converter can reach 100 ksps, but portable instruments often operate at a lower rate to reduce energy use and improve rejection of high-frequency noise. The external reference should be shutdown with the system when battery life is critical.

Resumen de productos recomendados

MCP3301T-BI/SN Microchip Technology Se usa en: Battery-Powered Data Acquisition, Industrial Process Monitoring, Remote Environmental Sensing, Precision Current Measurement, Laboratory Instrument Front End, Portable Measurement Instrument MCP3201T-CI/SN Lower-resolution SPI ADC alternative Se usa en: Battery-Powered Data Acquisition, Industrial Process Monitoring, Remote Environmental Sensing, Precision Current Measurement, Laboratory Instrument Front End, Portable Measurement Instrument
What is the operating voltage of MCP3301T-CI/SN?
The MCP3301T-CI/SN operates from 4.5 V to 5.5 V. According to the Microchip Technology datasheet, tested performance is specified over this supply range. The analog supply, digital supply, and external reference should therefore be designed around a nominal 5 V rail. Do not extend the supply beyond 5.5 V or operate below 4.5 V without checking the absolute-maximum ratings and ensuring that all digital input levels remain within the permitted range.
What are the key specifications of MCP3301T-CI/SN that engineers should know?
The MCP3301T-CI/SN is a 13-bit, one-channel differential ADC with a maximum conversion rate of 100 ksps and an SPI interface. The Microchip Technology datasheet specifies a 4.5 V to 5.5 V operating supply, an external reference range of 400 mV to 5 V, and input-referred resolution ranging from 98 µV to 1.22 mV. It is offered in an 8-pin SOIC package and is suitable for battery-powered instruments and remote data-acquisition systems.
How fast can MCP3301T-CI/SN perform analog-to-digital conversions?
The MCP3301T-CI/SN can perform conversions at up to 100 ksps. According to the Microchip Technology datasheet, this rate is tested with a 4.5 V to 5.5 V supply. Continuous operation at the maximum rate depends on correct SPI clocking, input settling, reference stability, and the acquisition requirements of the selected source impedance. Slower rates are generally preferable when filtering out wideband noise or sampling a high-impedance sensor.
Where can I download the MCP3301T-CI/SN datasheet PDF?
The MCP3301T-CI/SN datasheet PDF is available from the manufacturer-linked document at the product page's datasheet location, and the Microchip Technology product page provides the device documentation. The datasheet contains the detailed electrical characteristics, pin descriptions, reference circuit, input-equivalent circuit, timing information, and sample application guidance. Use the PDF associated with MCP3301 rather than an unrelated ADC document when checking pin names or conversion timing.
Where can I find the MCP3301T-CI/SN pinout?
The MCP3301T-CI/SN pinout is documented in the pin-description section of the Microchip Technology datasheet. The 8-pin SOIC uses a CS input, DIN and DOUT SPI signals, VDD and VSS power connections, VREF+ and VREF- reference connections, and VIN+ and VIN- differential analog inputs. Keep the exposed analog and digital return paths properly connected when translating the manufacturer's pin table into the PCB layout.
What is the difference between MCP3301T-CI/SN and MCP3201T-CI/SN?
The principal functional difference is conversion resolution: MCP3301T-CI/SN provides 13-bit conversion results, while MCP3201T-CI/SN provides 12-bit results. Both use the SPI interface and the 8-pin SOIC arrangement associated with these single-channel SAR converters. The higher resolution of the MCP3301 is useful when one additional code bit improves signal visibility, although noise and reference accuracy still determine the useful resolution of either design.
When should I choose MCP3301T-CI/SN over MCP3201T-CI/SN?
Choose MCP3301T-CI/SN when the design benefits from 13-bit resolution while retaining the 8-pin SOIC and SPI architecture of MCP3201T-CI/SN. The additional resolution can make slow, low-amplitude measurements easier to resolve and digital filtering easier to apply. Choose MCP3201T-CI/SN when 12-bit resolution is sufficient and lower conversion overhead or a simpler acquisition chain is acceptable. Verify timing, reference requirements, and electrical limits before substitution.
Is MCP3301T-CI/SN suitable for battery-powered measurement systems?
Yes, MCP3301T-CI/SN is suitable for battery-powered measurement systems because the Microchip Technology product page identifies low power consumption as a core feature. It supports a single differential channel, has a 4.5 V to 5.5 V operating range, and reaches up to 100 ksps. The converter requires an external reference, so overall system power should include the reference circuit and any sensor or signal-conditioning stages as well as the ADC itself.
Can MCP3201T-CI/SN replace MCP3301T-CI/SN in an SPI ADC design?
MCP3201T-CI/SN can be considered as a close 8-pin SOIC and SPI alternative, but it produces 12-bit results rather than 13-bit results. The one-bit resolution difference can change the full-scale code count, scaling calculation, noise significance, and acceptable input accuracy. Review acquisition timing, reference voltage, analog input range, and digital interface behavior against the manufacturer datasheets before treating it as a drop-in replacement.
What is the best drop-in replacement for MCP3301T-CI/SN?
The closest confirmed same-package candidate is MCP3301T-BI/SN, which is listed as a 13-bit, one-channel SAR ADC in an 8-pin SOIC package. MCP3201T-CI/SN is another close SPI and SOIC candidate, although its 12-bit resolution is lower. The available cross-reference information does not establish enough verified alternatives to claim a complete set of drop-in parts, so confirm pin assignments, supply limits, reference configuration, timing, and accuracy before production release.
Is MCP3301T-CI/SN the same as MCP3201T-CI/SN?
No, MCP3301T-CI/SN and MCP3201T-CI/SN are not identical. MCP3301T-CI/SN provides 13-bit resolution, while MCP3201T-CI/SN provides 12-bit resolution. Both are single-channel SAR converters associated with SPI communication and an 8-pin SOIC footprint, which makes the MCP3201 a possible close substitute after timing and specification review. Their output-code scales and effective measurement resolution should not be assumed interchangeable.
How do I choose the external reference voltage for MCP3301T-CI/SN?
Choose the MCP3301T-CI/SN external reference to match the maximum expected differential input while preserving useful code utilization. The Microchip Technology datasheet allows reference voltages from 400 mV to 5 V and states that this produces input-referred resolution between 98 µV and 1.22 mV. A smaller reference increases sensitivity but narrows the measurable input span, while a larger reference accepts a wider range at the cost of coarser voltage resolution.
Where can I buy MCP3301T-CI/SN and what is its lead time?
Use the Request a Quote form on this page to request current MCP3301T-CI/SN availability, unit pricing, minimum order quantity, and production lead time. The listing identifies the exact 8-pin SOIC orderable device, but quotations and delivery schedules can change with inventory, order quantity, and packaging requirements. State the required quantity and target delivery date in the quote request for a useful production response.
What is the price of MCP3301T-CI/SN?
The current MCP3301T-CI/SN price depends on order quantity and current sourcing conditions. Use the Request a Quote form on this page for the applicable unit price, quantity breaks, and availability. The structured pricing information on this page is updated separately, and a formal quotation provides the most appropriate commercial answer for production quantities.
Is MCP3301T-CI/SN in stock?
Stock availability for MCP3301T-CI/SN should be confirmed through the Request a Quote form on this page. The form allows the requested quantity, target date, and shipment destination to be included in the sourcing request. Because inventory can change quickly and may differ between component versions and distribution centers, do not base a production schedule on a general marketplace status message.
What cross-brand ADC can replace MCP3301T-CI/SN?
The ADS7818 is mentioned as a possible replacement in some 5 V systems, but it is not a universal drop-in substitute for MCP3301T-CI/SN. The ADS7818 has an internal 2.5 V reference and 12-bit resolution, whereas MCP3301T-CI/SN uses an external reference and provides 13-bit resolution. A design using the internal-reference input would require circuit changes, so verify the pinout and analog function before considering a board-level substitution.

Datos de referencia de ingeniería para MCP3301T-CI/SN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP3301T-CI/SN when the design needs one differential analog channel, 13-bit resolution, SPI communication, and operation from a 4.5 V to 5.5 V rail. It is especially suitable for battery-powered instruments, remote sensing, process measurement, and current-sense acquisition where a single input is sufficient. MCP3301T-BI/SN is the closest confirmed family alternative in an 8-pin SOIC package, but ordering-code-specific electrical details should still be compared. MCP3201T-CI/SN and MCP3201T-BI/SN are appropriate when 12-bit resolution is enough and the lower code count does not affect measurement performance. Verify package dimensions, acquisition timing, input range, and reference configuration before replacing an existing design.

Comparación con alternativas

Parámetro Este producto MCP3301T-BI/SN MCP3201T-CI/SN MCP3201T-BI/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC, 150 mil 8-pin SOIC 8-pin SOIC 8-pin SOIC
Resolution 13 bits 13 bits 12 bits 12 bits
Input Channels 1 channel 1 channel 1 channel 1 channel
Input Architecture Fully differential Fully differential Differential Differential
Conversion Method Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR) Successive approximation (SAR)
Digital Interface SPI SPI SPI SPI
External Reference Required; 400 mV to 5 V External reference External reference External reference

Diferenciadores clave

  • Higher conversion resolution within the same SPI SOIC architecture (frente a MCP3201T-CI/SN)
  • Same 13-bit conversion core and package family (frente a MCP3301T-BI/SN)
  • Differential measurement in a compact 8-pin package (frente a ADS7818)

Notas de diseño

Route VREF+, VREF-, VIN+, and VIN- as short analog traces, and place the reference bypass capacitor close to the VREF+ and VREF- pins. Keep SPI lines away from the input and reference nodes to reduce capacitive coupling. A continuous ground plane under the converter and a quiet return path for the analog signals provide a lower-impedance connection between the input source, reference, and converter.

Decouple VDD locally with ceramic capacitors selected for the supply rail and place them close to the converter. Because the ADC has an external reference, treat the reference source as part of the measurement chain rather than an optional support circuit. Reference noise and supply ripple can appear directly in the conversion result. Use separate filtering or a dedicated reference buffer when the reference source also serves noisy loads.

Do not assume the 13-bit code count guarantees 13 effective bits of real-world accuracy. Source impedance, acquisition time, reference stability, input noise, and PCB leakage can reduce usable resolution. For slow-changing measurements, average multiple samples and apply digital filtering; for fast signals, verify that the source settles before sampling and that SPI timing conforms to the Microchip Technology datasheet.

Use a fully differential input arrangement whenever the source can provide balanced outputs. This reduces sensitivity to common-mode voltage and noise present equally on VIN+ and VIN-. If the source is single-ended, bias it correctly within the input range and account for the ADC's differential architecture. Avoid grounding one input arbitrarily because that changes the usable signal span and may prevent the converter from utilizing its full code range.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS compliance is indicated for MCP3301T-CI/SN. No specific AEC-Q100 qualification, REACH declaration, halogen-free designation, or conflict-minerals statement was identified for this exact orderable device.

Datos verificados el: 2026-11-20 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP3301T-CI/SN datasheet MCP3301T-CI/SN pinout MCP3301T-CI/SN datasheet pdf MCP3301T-CI/SN specifications MCP3301T-CI/SN equivalent MCP3301T-CI/SN replacement MCP3301T-CI/SN price MCP3301T-CI/SN stock Microchip MCP3301T-CI/SN MCP3301T-CI/SN vs MCP3201T-CI/SN MCP3301 13 bit differential ADC MCP3301T-CI/SN application circuit

Componentes & términos relacionados

Microchip Technology MCP3301T-CI/SN MCP3301T-BI/SN MCP3201T-CI/SN MCP3201T-BI/SN MCP3301T-BI/MS MCP3201T-BI/MS ADS7818 ADC analog-to-digital converter successive-approximation converter SAR differential input SPI data-converter IC semiconductor 8-pin SOIC 150 mil SOIC surface mount external voltage reference battery-powered systems remote data acquisition industrial process monitoring output resolution conversion rate
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ