Microchip Technology

MCP3426A4-E/MS - 16-Bit Dual-Channel 15 SPS ADC | Microchip

N.º de pieza: MCP3426A4-E/MS ✓ Activo
2.048 V Vdss 8-MSOP Package
MOQ: 1 |

MCP3426A4-E/MS Descripción general

The Microchip Technology MCP3426A4-E/MS is a 16-bit, dual-channel, low-noise delta-sigma analog-to-digital converter with a 15-sample-per-second conversion rate, housed in an 8-MSOP package. It supports differential inputs, an integrated 2.048 V precision reference, and analog and digital power-supply operation from 2.7 V to 5.5 V. These characteristics make it suitable for precision instrumentation, industrial measurement, and low-frequency sensor acquisition.

A delta-sigma ADC is an analog-to-digital converter category that uses continuous-time oversampling and digital filtering to deliver high resolution from a low-noise analog front end. The MCP3426 belongs to the broader hierarchy of ADC, data-converter IC, signal-conditioning semiconductor, and analog measurement device. Its differential inputs can reject common-mode disturbance when paired with suitable sensor arrangements, while the integrated reference simplifies calibration and reduces the number of external precision components.

The MCP3426A4 provides up to 16-bit resolution, two analog input channels, and a 15 SPS conversion rate. Its differential input range extends to ±2.048 V when the internal 2.048 V reference is selected. The converter is optimized for low-noise measurements rather than high-speed waveform capture. Separate analog and digital supply connections also allow a mixed-signal board to control analog and digital supply paths independently, provided each supply remains within its specified operating range.

The converter uses a one-channel delta-sigma signal chain with digital filtering to achieve accurate results at low sample rates. This architecture is appropriate for temperature, pressure, strain, potentiometer, and slow process-control signals where resolution and input-noise performance matter more than high conversion bandwidth. The integrated reference and two differential-capable input channels reduce the need for external signal-conditioning hardware in many measurement circuits.

Typical uses include industrial process monitoring, laboratory data acquisition, environmental sensors, bridge-based pressure measurement, and battery-powered instrumentation. The 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V systems. For designs operating from a regulated 5 V rail, the converter can also support the 2.048 V differential range around ground when the input and reference configuration permits it.

Designers should pay close attention to input common-mode voltage, source impedance, filtering, grounding, and decoupling. A high-impedance sensor or resistive divider can require a longer sampling interval than the nominal conversion rate. Place the input and reference components close to the associated pins, maintain the analog and digital return paths separately, and follow the manufacturer datasheet for recommended capacitor values and layout.

This page combines the exact MCP3426A4-E/MS configuration, package information, family alternatives, commercial sourcing guidance, and practical analog-design considerations. It also distinguishes true same-package options from wider ADC choices that may require different boards, interfaces, or external circuitry.

Alternativas directas para MCP3426A4-E/MS — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP3426A4-E/MS (mismo factor de forma y huella) — difiere en Differential Input Range, Package, Input Channels, Input Configuration, Maximum Conversion Rate.

Microchip Technology
Differential Input Range: ±2.048 V differential
Package: 8-pin MSOP
Input Channels: 2 differential inputs
Microchip Technology
Input Channels: 2 channels
Input Configuration: Differential

MCP3426A4T-E/MS

✅ Sustitución directa
📦 8-MSOP
Resolution, channel count, conversion rate, and package are unchanged at 16 bit, 2 channels, 15 samples/s, and 8-MSOP; suffix-specific temperature and ordering details require confirmation.

📋 Alternativa de referencia (no en el catálogo)

MCP3426A5-E/MS

✅ Sustitución directa
📦 8-MSOP
Resolution and package remain 16 bit and 8-MSOP with two family inputs, while the family conversion-rate code differs from A4 and must be checked before timing-dependent designs are migrated.

📋 Alternativa de referencia (no en el catálogo)

MCP3426A1T-E/MS

✅ Sustitución directa
📦 8-MSOP
Uses the same 8-MSOP footprint and 16-bit MCP3426 family architecture, but the A1T conversion and operating configuration differs from A4, requiring timing and gain verification.

📋 Alternativa de referencia (no en el catálogo)

MCP3426A0-E/MS

✅ Sustitución directa
Microchip Technology
📦 8-MSOP
16 bit · 2 channels · 2 differential inputs · 1-channel sigma-delta conversion per differential input · 15 SPS · 2.048 V · ±2.048 V · I2C

Consulte el precio

Ver hoja de datos →

MCP3426A1-E/MS

✅ Sustitución directa ⚠️ Especificaciones sin verificar
Microchip Technology
📦 8-MSOP
16 bit · 2 differential inputs · Delta-sigma sigma-delta ADC · 15 SPS · 2.7 V to 5.5 V · 2.048 V · ±2.048 V differential · 8-pin MSOP

Consulte el precio

Ver hoja de datos →

MCP3426A4-E/MS Valores máximos y características eléctricas

ADC Resolution 16 bit
Input Channel Count 2 channels
Conversion Architecture 1-channel delta-sigma ADC
Maximum Conversion Rate 15 samples/s
Input Type 2 differential-capable analog inputs
Internal Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Minimum Operating Temperature -55 °C
Maximum Operating Temperature 125 °C
Encapsulado 8-MSOP
Recuento de pines 8 pins
Tipo de montaje Surface mount

Guía de configuración de pines de MCP3426A4-E/MS 8-msop

Configuración de pines para MCP3426A4-E/MS (encapsulado 8-msop). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-msop para MCP3426A4-E/MS

No hay datos detallados de patillaje disponibles para MCP3426A4-E/MS.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP3426A4-E/MS es adecuado para 6 aplicacións: Industrial Process Monitoring, Pressure and Strain Measurement, Environmental Sensor Acquisition, Laboratory Data Acquisition, Battery-Powered Instrumentation, Precision Potentiometer Measurement.

🏭

Industrial Process Monitoring

The MCP3426A4-E/MS fits slow industrial process signals that require more resolution than a conventional low-cost converter but do not need rapid acquisition. Its 16-bit resolution, two analog channels, and 15 samples/s rate support pressure, flow, level, and temperature monitoring. Differential inputs can reduce common-mode pickup when the sensor and return paths are balanced, while the integrated 2.048 V reference simplifies excitation and measurement calibration. The principal design consideration is ensuring that every signal remains inside the converter's common-mode and input limits throughout the process range.

⚡

Pressure and Strain Measurement

The MCP3426A4-E/MS is appropriate for bridge-based pressure and strain instrumentation where the useful signal is small relative to the bridge excitation and changes at low frequency. Differential input architecture helps preserve the small differential sensor voltage while rejecting shared supply and ground disturbance. The 16-bit conversion resolution and integrated 2.048 V reference provide a repeatable measurement foundation. Engineers should still calculate bridge sensitivity, verify input common-mode range, apply suitable input filtering, and avoid adding excessive source resistance that could disturb the converter's sampling behavior.

🧩

Environmental Sensor Acquisition

The MCP3426A4-E/MS can acquire temperature, humidity, gas, and light signals from slow-changing environmental sensors. Its two channels allow two sensor outputs to be measured sequentially, and the 15 samples/s rate is more than adequate for many seconds- or minutes-scale environmental variations. The integrated 2.048 V reference reduces external precision-component count, while differential inputs can help when the sensor is referenced to the same return as the converter. Calibration should account for sensor offset, gain, reference behavior, and the input network placed at the connector or probe.

🔧

Laboratory Data Acquisition

For laboratory measurements such as potentiometers, resistive dividers, and low-frequency transducer outputs, the MCP3426A4-E/MS provides a compact 16-bit conversion stage. Its 8-MSOP package keeps the analog section compact, and the two-input architecture supports a reference channel or differential pairing. A 15 samples/s rate suits recorded variables that change slowly, but it is not intended for audio-band or high-speed transient capture. Use shielded sensor wiring, defined grounding, and post-conversion digital filtering to obtain repeatable results.

📱

Battery-Powered Instrumentation

The MCP3426A4-E/MS can serve as the measurement section of a battery-powered instrument because it supports supply voltages from 2.7 V to 5.5 V and is designed for low-speed precision conversion. The operating current and available shutdown behavior must be confirmed in the manufacturer datasheet for the selected mode. Since the converter's conversion rate is 15 samples/s, the host controller can remain in a low-power state between measurements. Use the internal reference when its accuracy is sufficient, and account for the reference's contribution to the overall measurement uncertainty.

📺

Precision Potentiometer Measurement

The MCP3426A4-E/MS is well suited to high-resolution potentiometer and resistive-divider measurements that require more than 8 to 12 bits but occur at human or machine speed. Its 16-bit resolution can expose subtle position or level changes, while the two-channel architecture can support a second reference or complementary measurement. Input impedance and acquisition time are important because very high source resistance can interact with internal sampling circuitry. Follow the datasheet settling requirements, include input filtering where appropriate, and calibrate endpoint offset and linearity over the mechanical range.

Resumen de productos recomendados

MCP3426A4T-E/MS Same-family 8-MSOP ADC alternative Se usa en: Industrial Process Monitoring, Pressure and Strain Measurement, Laboratory Data Acquisition, Precision Potentiometer Measurement MCP3426A5-E/MS Same-family precision ADC alternative Se usa en: Industrial Process Monitoring, Environmental Sensor Acquisition, Precision Potentiometer Measurement MCP3426A1-E/MS Microchip Technology Se usa en: Pressure and Strain Measurement, Battery-Powered Instrumentation MCP3426A0-E/MS Microchip Technology Se usa en: Environmental Sensor Acquisition, Battery-Powered Instrumentation MCP3426A1T-E/MS Same-package MCP3426 alternative Se usa en: Laboratory Data Acquisition
What is the conversion rate of the MCP3426A4-E/MS?
The MCP3426A4-E/MS performs up to 15 conversions per second. According to the Microchip MCP3426 product documentation, this is a low-speed, high-resolution converter intended for precision analog measurement rather than high-frequency waveform acquisition. Its 16-bit resolution, two input channels, and delta-sigma filtering make it suitable for temperature, pressure, strain, potentiometer, and industrial process signals that change relatively slowly.
What does MCP3426A4-E/MS do and where is it used?
The MCP3426A4-E/MS is a 16-bit, dual-channel, delta-sigma analog-to-digital converter that converts differential or single-ended analog signals into digital measurements at up to 15 samples per second. It is used in industrial process control, environmental monitoring, laboratory instrumentation, pressure and strain measurement, and other low-frequency sensor systems. The manufacturer identifies a two-channel, low-noise architecture with up to 16-bit resolution.
What is the input voltage range of MCP3426A4-E/MS?
The MCP3426A4-E/MS supports a differential input range of ±2.048 V with its internal 2.048 V reference. According to the Microchip MCP3426 product page, the converter also includes differential inputs and the precision on-board reference. Exact single-ended input limits and headroom depend on the selected gain, reference, common-mode voltage, and the configuration described in the manufacturer datasheet.
What supply voltage does the MCP3426A4-E/MS require?
The MCP3426A4-E/MS operates from 2.7 V to 5.5 V, supporting both 3.3 V and 5 V analog and digital supply arrangements. According to the MCP3426 family comparison information, 2.7 V is the minimum operating supply voltage and 5.5 V is the maximum. Decouple the analog and digital supply pins separately and keep both supplies within their individual operating limits.
Where can I download the MCP3426A4-E/MS datasheet PDF?
The official MCP3426 documentation is available from the Microchip product page linked on this page. Open the MCP3426 product documentation and select the datasheet and related support documents for the MCP3426 family. The MCP3426A4-E/MS is the 8-MSOP configuration, so use the family pinout and electrical tables together with the ordering information to confirm the exact package and temperature variant.
Where can I find the MCP3426A4-E/MS pinout?
The MCP3426A4-E/MS pinout is shown in the manufacturer MCP3426 family documentation under the 8-MSOP package information. The package contains eight pins, including separate analog and digital supply connections and the two analog input channels. Before laying out a PCB, verify the exact pin names and exposed connections in the manufacturer datasheet because the displayed package image is a generic 8-MSOP representation.
What is the best drop-in replacement for MCP3426A4-E/MS?
MCP3426A4T-E/MS is the closest same-package alternative because it is also listed as a 16-bit, two-input, 15 SPS converter in an 8-MSOP package. MCP3426A5-E/MS and MCP3426A1T-E/MS are other 8-MSOP MCP3426 family candidates, but their conversion-rate and configuration details must be checked before substitution. No cross-brand drop-in replacement with verified pin compatibility and parameter proximity was identified.
Can MCP3426A1T-E/MS replace MCP3426A4-E/MS?
MCP3426A1T-E/MS can be considered only as a family-level, same-package alternative because it appears in comparison data for the MCP3426 series and uses the same 8-MSOP format. It should not be treated as an automatic substitution until its conversion rate, gain settings, electrical limits, and acquisition timing are confirmed against the MCP3426A4-E/MS requirements. Software or calibration changes may also be necessary.
What is the best cross-brand equivalent for MCP3426A4-E/MS?
No cross-brand drop-in equivalent has been established for the MCP3426A4-E/MS with a verified 8-MSOP footprint and compatible conversion, interface, and reference functions. A broad ADC with the same resolution and sample rate is not automatically interchangeable because pin assignment, gain architecture, reference voltage, digital interface, and acquisition timing may differ. Use the Request a Quote form on this page when you need sourcing assistance for a qualified alternative.
MCP3426A4-E/MS vs MCP3426A4T-E/MS: which should I choose?
Choose MCP3426A4-E/MS when its specified package, temperature grade, and ordering configuration fit your design; choose MCP3426A4T-E/MS when that variant better satisfies your production or temperature requirements. Both are identified as 16-bit, dual-input, 15 SPS MCP3426 converters in 8-MSOP packages. Confirm the suffix-specific ordering information and temperature limits before treating them as interchangeable.
When should I choose MCP3426A4-E/MS instead of another ADC?
Choose MCP3426A4-E/MS when the design needs high resolution, two analog channels, differential measurement capability, an integrated 2.048 V reference, and a 15 SPS conversion rate in an 8-MSOP footprint. It is a strong fit for slowly changing sensor signals rather than audio or communications waveforms. Choose another converter only when it provides a compatible interface and a clearly better advantage, such as higher sample rate, lower offset, or a different accuracy architecture.
Is MCP3426A4-E/MS suitable for industrial sensor measurement?
The MCP3426A4-E/MS is suitable for many industrial and laboratory sensor-measurement applications that operate below 15 samples per second. Its 16-bit resolution, two channels, differential inputs, and integrated 2.048 V reference support bridge sensors, resistive dividers, potentiometers, and low-frequency process signals. Industrial suitability also depends on grounding, isolation, surge protection, calibration, and the final ambient-temperature requirement.
How much power and heat does MCP3426A4-E/MS dissipate?
The MCP3426A4-E/MS dissipation depends on analog and digital supply voltages, selected reference configuration, conversion activity, and ambient temperature. A useful estimate is P = (VDDA - VINA average) × IA + (VDDD - VIND average) × ID, using the currents from the manufacturer datasheet for the selected operating mode. Because those current values are not stated in the product summary, confirm them before sizing copper and thermal capacity.
Can MCP3426A4-E/MS measure a 0 to 5 V sensor signal?
The MCP3426A4-E/MS should not be connected directly to a 0 to 5 V signal that exceeds its permitted input and common-mode limits. Its internal reference establishes a differential range of up to ±2.048 V, while the allowable common-mode range depends on supply voltage and configuration. Use an attenuation, level-shift, or differential-divider network, or use the external-reference configuration when supported, and verify the resulting full-scale range.
What are the key specifications of MCP3426A4-E/MS that engineers should know?
The MCP3426A4-E/MS is a 16-bit, dual-channel delta-sigma ADC with a maximum conversion rate of 15 samples/s, an integrated 2.048 V reference, and a differential input range of ±2.048 V. It operates from 2.7 V to 5.5 V and comes in an 8-MSOP surface-mount package. The manufacturer also identifies an operating temperature range of -55 °C to 125 °C for this device configuration.

Datos de referencia de ingeniería para MCP3426A4-E/MS — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP3426A4-E/MS when the system needs a 16-bit, two-channel, low-speed converter with differential inputs, a 2.048 V internal reference, and an 8-MSOP footprint. It is well matched to slow industrial, laboratory, environmental, bridge-sensor, and potentiometer measurements. MCP3426A4T-E/MS is the closest identified option because its published headline ratings and package match, but suffix-specific temperature and ordering requirements still need confirmation. MCP3426A5-E/MS, MCP3426A1T-E/MS, and MCP3426A1-E/MS are same-family 8-MSOP candidates whose acquisition settings and gain behavior must be reviewed before reuse. No verified cross-brand drop-in part is identified, so changing manufacturers may require a PCB revision, interface adaptation, and a new signal-conditioning design.

Comparación con alternativas

Parámetro Este producto MCP3426A4T-E/MS MCP3426A5-E/MS MCP3426A1T-E/MS
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-MSOP 8-MSOP - same package 8-MSOP - same package 8-MSOP - same package
Resolution 16 bit 16 bit 16 bit 16 bit
Conversion Architecture 1-channel delta-sigma ADC 1-channel delta-sigma ADC Delta-sigma ADC family MCP3426 delta-sigma family
Special Configuration MCP3426A4 family code A4T family code A5 family code A1T family code

Diferenciadores clave

  • Closest identified package and speed match (frente a MCP3426A4T-E/MS)
  • Two-channel measurement in a compact package (frente a MCP3426A1-E/MS)
  • Integrated precision reference (frente a MCP3426A5-E/MS)

Notas de diseño

Treat the analog input and reference paths as sensitive short interconnects. Place the input filtering components, reference components, and their grounding returns close to the MCP3426A4-E/MS instead of routing them around the PCB. Keep the digital interface away from the analog input nodes, use a continuous ground reference, and follow the manufacturer pinout and recommended layout before defining the board footprint.

Do not assume that a resistor divider automatically makes any 0–5 V sensor safe for this converter. Check the signal against both the differential input range and the common-mode limits at the 2.7 V to 5.5 V operating supply. A passive attenuator also changes the available resolution, while protection-diode leakage and input bias current can introduce error. Verify the complete input network under minimum and maximum signal conditions.

Source impedance can be as important as signal amplitude for a delta-sigma ADC. Long sensor wiring, high-value divider resistors, and narrow filtering capacitors can prevent the internal sampling network from settling within the selected conversion interval. Use the manufacturer acquisition guidance to determine suitable resistor and capacitor values, or add a low-noise buffer when the sensor cannot meet the required settling behavior.

Decouple analog and digital supplies independently and keep the supply loop areas small. A stable reference and low-impedance power rail are as important as the ADC's nominal resolution because supply disturbance can appear as measurement error. Start with the manufacturer-recommended capacitor values and placement, then validate noise, startup, and reference settling on the completed board rather than relying only on individual component tolerances.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Compliance status was not established from the product summary. Confirm the exact MCP3426A4-E/MS ordering information and declarations in the Microchip product documentation before using the part in a regulated design.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

MCP3426A4-E/MS datasheet MCP3426A4-E/MS specifications MCP3426A4-E/MS pinout MCP3426A4-E/MS datasheet pdf MCP3426A4-E/MS equivalent MCP3426A4-E/MS replacement MCP3426A4-E/MS cross reference MCP3426A4-E/MS vs MCP3426A4T-E/MS MCP3426A4-E/MS 8-MSOP ADC MCP3426A4-E/MS application circuit Microchip MCP3426A4-E/MS MCP3426A4-E/MS price

Componentes & términos relacionados

Microchip Technology MCP3426A4-E/MS MCP3426A4T-E/MS MCP3426A5-E/MS MCP3426A1T-E/MS MCP3426A0-E/MS MCP3426A1-E/MS MCP3426 ADC analog-to-digital converter delta-sigma ADC data-converter IC precision measurement differential input integrated voltage reference 2.048 V reference 16-bit resolution 15 samples per second 8-MSOP MSOP package family surface-mount package industrial process monitoring pressure sensor measurement environmental sensor acquisition common-mode voltage
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ