Microchip Technology

MCP3550-50E/SN - 22-Bit, 12.5 SPS Single-Channel ADC

N.º de pieza: MCP3550-50E/SN ✓ Activo
4.5 V Vdss 8-pin SOIC Package
MOQ: 1 |

MCP3550-50E/SN Descripción general

The Microchip MCP3550-50E/SN is a 22-bit, 12.5-samples-per-second, single-channel sigma-delta analog-to-digital converter with differential inputs in an 8-pin SOIC package. It is designed for precision measurement systems that require low output noise, automatic offset and gain calibration, and a compact serial interface. The converter supports operation from -40°C to +125°C, making it suitable for industrial, process-control, and sensor-measurement equipment.

An ADC is a data-conversion IC that transforms an analog voltage into a digital number for processing, storage, or transmission. Sigma-delta ADCs belong to the data-converter and signal-processing hierarchy. They use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance from relatively slow input signals. The MCP3550 uses a fully differential input architecture, allowing sensor signals to be measured with common-mode rejection and improved immunity to externally coupled noise.

Key characteristics include 22-bit resolution, 12.5 SPS conversion performance, 2.5 μV RMS output noise, and effective resolution of 21.9 bits. Automatic internal offset and gain calibration helps reduce systematic error, while the differential inputs suit bridge sensors, current-shunt measurements, and other signals centered around a common reference voltage. The device is offered in the space-saving 8-pin SOIC package, with an 8-pin MSOP option also available in the MCP3550 family.

The delta-sigma architecture prioritizes resolution and noise rather than high conversion speed. This makes the MCP3550 appropriate for slow-changing measurements such as temperature, pressure, load, flow, and chemical-sensor outputs. A digital filter removes out-of-band noise after sampling, so the input bandwidth should be constrained to avoid aliasing and to prevent high-frequency signals from affecting measurement accuracy. Its differential signal path also requires careful common-mode voltage and reference design.

Typical applications include industrial pressure transmitters, load-cell and strain-gauge instrumentation, temperature measurement, battery or power-supply monitoring, laboratory data acquisition, and process-control equipment. Using a differential input arrangement helps preserve measurement integrity when the sensor output is small relative to the analog common-mode voltage. Systems requiring simultaneous acquisition of several channels can pair it with a multiplexer when the required sampling rate remains within the converter's 12.5 SPS capability.

The principal design consideration is analog signal conditioning around the ADC. Input filtering, differential driver stability, reference decoupling, grounding, and digital trace isolation directly affect achievable resolution. Designers should also calculate the required output-data rate and digital-filter settling time before allocating acquisition slots in a multichannel system. The SOIC-8 package permits straightforward assembly but requires adequate copper and thermal consideration when used near the upper temperature limit.

This product page combines the manufacturer specifications with practical interpretation of the MCP3550-50E/SN architecture, pinout availability, package constraints, selection guidance, and drop-in alternatives. It also identifies where a related converter changes output-noise, calibration, sampling-speed, or packaging characteristics, helping engineers choose a device that matches the actual measurement chain rather than relying on resolution alone.

Alternativas directas para MCP3550-50E/SN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

MCP3551T-E/SN

✅ Sustitución directa
Microchip Technology
📦 8-pin SOIC
22-bit single-channel delta-sigma ADC · 1 fully differential input · 22 bit · 21.9 bit · 2.5 uVRMS · 13.75 samples per second · SPI-compatible serial interface · -40C to +125C

Consulte el precio

Ver hoja de datos →

MCP3550-50E/SNVAO

✅ Sustitución directa
📦 8-pin SOIC
Same MCP3550-50E 8-pin SOIC electrical family and 22-bit, 12.5 SPS architecture; the SNVAO ordering option adds automotive-ordering treatment, with qualification and marking requiring verification.

📋 Alternativa de referencia (no en el catálogo)

MCP3551-50E/SN

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-pin SOIC
Same MCP3551 22-bit converter family and 8-pin SOIC footprint, but the MCP3551 filter and noise characteristics may differ from the MCP3550's 2.5 μV RMS output-noise specification.

📋 Alternativa de referencia (no en el catálogo)

MCP3550-50E/SN Valores máximos y características eléctricas

Resolución 22 bit
Effective Resolution 21.9 bit
Conversion Rate 12.5 SPS
Number of Channels 1 channel
Architecture 1 sigma-delta
Input Type Fully differential analog input
Ruido de salida 2.5 μV RMS
Offset and Gain Calibration Automatic internal calibration
Digital Interface SPI
Tensión de alimentación 4.5 V
Rango de temperatura de funcionamiento -40°C to +125°C
Encapsulado 8-pin SOIC
Tipo de montaje Surface mount
Family Package Options 8-pin MSOP and 8-pin SOIC
Estado RoHS Compliant
Estado del ciclo de vida In production

Guía de configuración de pines de MCP3550-50E/SN 8-pin msop and 8-pin soic

Configuración de pines para MCP3550-50E/SN (encapsulado 8-pin msop and 8-pin soic). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado 8-pin msop and 8-pin soic para MCP3550-50E/SN

No hay datos detallados de patillaje disponibles para MCP3550-50E/SN.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

MCP3550-50E/SN es adecuado para 6 aplicacións: Industrial Pressure Transmitters, Load-Cell and Strain-Gauge Measurement, Temperature and Thermistor Acquisition, Battery and Power-Supply Monitoring, Laboratory Data Acquisition, Process-Control and Chemical Sensors.

🏭

Industrial Pressure Transmitters

The MCP3550-50E/SN fits slow-changing pressure-sensor signals because its 22-bit resolution and 21.9-bit effective resolution preserve small changes in a narrow analog range. The fully differential input accepts a sensor centered around a common-mode voltage and rejects common-mode disturbance better than a single-ended arrangement. At 12.5 SPS, the converter suits temperature, pressure, and process-control measurements that change over seconds rather than waveforms. Designers should band-limit the input, decouple the 4.5 V supply, and verify the selected reference against the required input span.

⚖️

Load-Cell and Strain-Gauge Measurement

The MCP3550-50E/SN is suitable for bridge-based force and strain measurements where the useful signal is small and common-mode rejection is important. Its differential sigma-delta input architecture supports direct comparison of the bridge excitation with a reference network, while automatic internal offset and gain calibration helps control systematic conversion error. The 2.5 μV RMS noise specification makes the converter attractive for high-resolution front ends. A stable bridge excitation, low-noise reference, and carefully shielded analog routing remain essential for achieving useful field accuracy.

🌡️

Temperature and Thermistor Acquisition

The MCP3550-50E/SN can digitize thermistor or resistive temperature-sensor networks when high resolution is more important than rapid conversion. Its 22-bit nominal resolution and 12.5 SPS rate are well matched to thermal signals that vary slowly, allowing the digital filter to reject noise outside the measurement bandwidth. The differential input arrangement can help when the sensing element is connected to a reference network, while the -40°C to +125°C device rating supports industrial environmental requirements. Component tolerances, self-heating, and bridge or divider excitation drift should be included in the calibration budget.

🔋

Battery and Power-Supply Monitoring

The MCP3550-50E/SN is appropriate for slow-changing battery, charger, or power-rail measurements where a differential input can monitor a scaled voltage relative to a stable reference. The 12.5 SPS conversion rate is adequate for supervisory and energy-management functions rather than transient waveform capture. Its 21.9-bit effective resolution can reveal small changes in a regulated rail, but the useful result also depends on reference stability, input-divider accuracy, and the analog filter's settling behavior. The converter's 4.5 V supply architecture must be reconciled with the monitored system voltage and grounding arrangement.

🧪

Laboratory Data Acquisition

The MCP3550-50E/SN can serve as a precision front end in laboratory systems measuring slow sensor outputs, current-shunt voltages, or calibrated analog quantities. Its SPI interface allows a controller to retrieve digital results, while the 22-bit resolution and 2.5 μV RMS noise support measurements requiring more resolution than a conventional lower-cost ADC. The 12.5 SPS rate makes it most appropriate for temperature, force, pressure, and laboratory channels rather than audio-band or vibration waveforms. Firmware should account for digital-filter latency and discard results that have not reached a settled output condition.

🧪

Process-Control and Chemical Sensors

The MCP3550-50E/SN suits electrochemical, conductivity, and chemical-sensor systems that produce slowly varying differential signals. The sigma-delta architecture provides high resolution and narrow-band filtering, while automatic offset and gain calibration helps compensate for device-level errors that are important in long-duration process measurements. Its -40°C to +125°C operating range supports demanding industrial environments. The analog front end should nevertheless include low-noise excitation, defined input bandwidth, reference compensation, and diagnostics to distinguish sensor drift from converter or system-level errors.

Resumen de productos recomendados

MCP3550-50E/SNVAO Same-family SOIC ordering option Se usa en: Industrial Pressure Transmitters, Load-Cell and Strain-Gauge Measurement, Temperature and Thermistor Acquisition, Laboratory Data Acquisition, Process-Control and Chemical Sensors MCP3551T-E/SN Microchip Technology Se usa en: Industrial Pressure Transmitters, Load-Cell and Strain-Gauge Measurement, Temperature and Thermistor Acquisition, Battery and Power-Supply Monitoring, Laboratory Data Acquisition MCP3551-50E/SN Related SOIC ADC family option Se usa en: Battery and Power-Supply Monitoring, Process-Control and Chemical Sensors
What are the key specifications of MCP3550-50E/SN that engineers should know?
The MCP3550-50E/SN is a 22-bit, single-channel, fully differential sigma-delta ADC with a maximum conversion rate of 12.5 SPS, 2.5 μV RMS output noise, and 21.9-bit effective resolution. According to the Microchip MCP3550/1/3 Data Sheet 20001950F, it provides automatic internal offset and gain calibration, operates from -40°C to +125°C, and uses an SPI interface in an 8-pin SOIC package. These characteristics make it most suitable for slow-changing precision sensor signals rather than high-speed waveform acquisition.
What is the operating voltage of MCP3550-50E/SN?
The MCP3550-50E/SN operates from a 4.5 V supply. The manufacturer product listing identifies the converter as a 22-bit, single-channel sigma-delta ADC in an 8-pin SOIC package, while the Microchip MCP3550/1/3 Data Sheet 20001950F covers the family's electrical operating limits. Because the analog input range and reference arrangement are tied to this supply architecture, the complete input common-mode range, output-code limits, and decoupling requirements should be taken from the datasheet before signal conditioning is finalized.
Where can I download the MCP3550 datasheet PDF?
The MCP3550 family datasheet can be downloaded from the official Microchip PDF at https://ww1.microchip.com/downloads/en/DeviceDoc/20001950F.pdf. It is titled MCP3550/1/3 Data Sheet and covers the converter family, including the MCP3550-50E/SN. The document is the appropriate place to review the electrical characteristics, conversion timing, digital-filter behavior, calibration sequence, application circuit, and package pin descriptions before finalizing a PCB or firmware implementation.
Where can I find the MCP3550-50E/SN pinout?
The MCP3550-50E/SN pinout is published in the pin-description and package-drawing sections of the Microchip MCP3550/1/3 Data Sheet 20001950F. Use that diagram to assign power, ground, analog input, reference, and SPI signals on the 8-pin SOIC footprint. Do not infer assignments from a generic SOIC drawing because the exposed function names and analog pin locations are device-specific. The complete production design should also follow the datasheet's analog-layout and decoupling recommendations rather than relying only on the symbol pin order.
How much noise does the MCP3550-50E/SN ADC have?
The MCP3550 family specifies low output noise of 2.5 μV RMS with effective resolution of 21.9 bits. This performance is obtained through its sigma-delta conversion and digital filtering architecture, while automatic internal offset and gain calibration reduces systematic error. The Microchip MCP3550/1/3 Data Sheet 20001950F also defines the noise under specific bandwidth and operating conditions. System-level noise can be higher when reference ripple, input-driver distortion, or out-of-band interference reaches the converter.
Is MCP3550-50E/SN suitable for sensor measurement?
The MCP3550-50E/SN is suitable for slow-changing sensor signals because it combines 22-bit resolution with a fully differential input and 12.5 SPS conversion rate. Differential excitation is useful for bridge sensors, shunt measurements, and other low-level signals because it reduces sensitivity to common-mode noise. The -40°C to +125°C operating range also suits industrial instrumentation. Designers should limit the analog bandwidth, stabilize the input driver, and confirm that the required settling interval is compatible with the digital filter.
What can replace MCP3550-50E/SN?
MCP3551T-E/SN is a closely related 8-pin SOIC option that can serve as a drop-in candidate, but its filtering and conversion characteristics must be checked against the original design. MCP3550-50E/SNVAO is another same-footprint ordering option associated with automotive qualification. Neither candidate should be substituted solely because the package matches: confirm supply voltage, differential input range, reference voltage, SPI timing, digital-filter response, and calibration behavior against the manufacturer datasheet before approving a replacement.
What is the best Microchip equivalent for MCP3550-50E/SN?
MCP3551T-E/SN is the closest related Microchip drop-in candidate identified for the 8-pin SOIC footprint, while MCP3550-50E/SNVAO offers a same-package ordering route with automotive-ordering implications. The correct choice depends on whether the original design depends on the MCP3550 family's 12.5 SPS rate, 2.5 μV RMS noise, automatic calibration behavior, and digital-filter response. Verify every electrical and timing parameter in the MCP3550/1/3 Data Sheet 20001950F rather than treating functional similarity as proof of interchangeability.
MCP3550-50E/SN vs MCP3551T-E/SN: which is better for a precision sensor?
MCP3550-50E/SN is the better default when the original circuit depends on the documented 12.5 SPS conversion rate and established MCP3550 filtering and calibration behavior. MCP3551T-E/SN may be preferable when its specific noise, line-frequency rejection, or conversion characteristics better match the measurement bandwidth. Both use an 8-pin SOIC format, but package similarity alone does not guarantee identical performance. Compare the two devices' acquisition timing, output code behavior, digital filter, supply requirements, and calibration sequence before replacing the original part.
When should I choose MCP3550-50E/SN over MCP3551T-E/SN?
Choose MCP3550-50E/SN when maintaining a proven design based on the MCP3550 family's 12.5 SPS operation, 21.9-bit effective resolution, and established digital-filter behavior is more important than exploring the MCP3551 family's alternative filtering options. MCP3551T-E/SN is attractive when its manufacturer-documented performance better resolves 50 Hz or 60 Hz interference for a particular signal bandwidth. The decision should be based on the desired sample interval, filter settling time, noise spectrum, and existing firmware rather than the similar 8-pin SOIC package.
Is MCP3550-50E/SN in stock and what is its lead time?
The manufacturer direct listing reports 8,800 units available in full tubes and states an estimated factory lead time of six weeks, with an estimated shipment date of 30-Nov-2026 for that listing. Inventory and timing can change quickly, so use the Request a Quote form on this page to request current stock, authorized sourcing, and a firm lead time for the exact MCP3550-50E/SN ordering code and requested quantity.
Where can I buy MCP3550-50E/SN online?
Use the Request a Quote form on this page to request MCP3550-50E/SN with the required tube quantity and delivery target. The manufacturer identifies the device as in production, and its direct listing reports 8,800 units in full tubes at the time of publication. XAIPART can confirm current availability, lot traceability, and expected delivery through the quote form without relying on a static listing that may not reflect current inventory.
What is the price of MCP3550-50E/SN?
Current unit pricing for MCP3550-50E/SN should be requested through the Request a Quote form on this page so the quantity, tube packaging, authorized sourcing, and target delivery date can be considered together. The exact MPN is listed as in production by the manufacturer, and a direct listing reports 8,800 units in full tubes. A quote-based response avoids presenting a stale starting price as a firm quantity-availability or shipping commitment.
Does MCP3550-50E/SN meet automotive or RoHS requirements?
The MCP3550-50E/SN is identified as RoHS compliant, and the device operates across -40°C to +125°C. Automotive qualification should be confirmed from the specific ordering code rather than inferred from temperature range alone; the related MCP3550-50E/SNVAO ordering option appears in automotive-ordering data, but its qualification documents must be reviewed for the intended grade. Microchip's MCP3550/1/3 Data Sheet 20001950F remains the controlling technical reference for device qualification and ordering information.
Can MCP3550-50E/SN replace MCP3550-50E/SNVAO?
MCP3550-50E/SN and MCP3550-50E/SNVAO use the same 8-pin SOIC family format, but a footprint match does not by itself establish interchangeability. The SNVAO ordering code may identify a different qualification or ordering treatment, so the appropriate first step is to compare the current manufacturer ordering table and qualification documentation. Confirm electrical ratings, temperature grade, marking, moisture handling, and any automotive production requirements before using either code interchangeably.

Datos de referencia de ingeniería para MCP3550-50E/SN — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP3550-50E/SN for precision, slow-changing measurements that benefit from 22-bit resolution, 21.9-bit effective resolution, 2.5 μV RMS noise, fully differential inputs, and automatic offset and gain calibration. It is particularly suitable for bridge sensors, pressure transmitters, thermistors, laboratory measurement, and low-level power monitoring. Choose MCP3551T-E/SN when the MCP3551 family's documented digital filtering or noise-rejection behavior is better matched to the required bandwidth. Choose MCP3550-50E/SNVAO when the same electrical device is needed with the automotive ordering treatment, after checking qualification and marking requirements. In every case, verify supply voltage, reference arrangement, conversion timing, digital-filter settling, and SPI timing against the manufacturer datasheet before production use.

Comparación con alternativas

Parámetro Este producto MCP3551T-E/SN MCP3550-50E/SNVAO MCP3551-50E/SN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-pin SOIC 8-pin SOIC - same 8-pin SOIC - same 8-pin SOIC - same
Resolution 22 bit 22 bit 22 bit 22 bit
Digital Interface SPI SPI SPI SPI
Operating Temperature Range -40°C to +125°C -40°C to +125°C -40°C to +125°C -40°C to +125°C

Diferenciadores clave

  • Documented precision at a 12.5 SPS conversion rate (frente a MCP3551T-E/SN)
  • Same MCP3550-50E electrical architecture and footprint (frente a MCP3550-50E/SNVAO)
  • Automatic offset and gain calibration in a precision single-channel ADC (frente a MCP3551-50E/SN)

Notas de diseño

Route the differential input and reference signals close to the converter and away from SPI clock and switching-node traces. Use a continuous ground plane, minimize input-loop area, and place input and reference filtering capacitors at their associated pins. The fully differential architecture can reject common-mode noise, but it cannot recover performance lost through unequal routing, parasitic pickup, or reference ripple.

Limit the analog input bandwidth to the signal and digital-filter requirements. A sigma-delta ADC samples the input and rejects out-of-band noise digitally, but frequencies above the Nyquist rate can alias into the measurement band. Add only the analog filtering needed to prevent aliasing, then account for the converter's output settling behavior when scheduling successive channel conversions.

Decouple the 4.5 V supply locally with the capacitance and placement specified in the manufacturer datasheet. Keep the reference voltage quiet and verify its behavior over the full -40°C to +125°C range. Power-supply and reference fluctuations appear directly in the converted result, so a low-noise reference and short supply return path are as important as the nominal converter resolution.

Información de cumplimiento

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

RoHS compliance is stated for the MCP3550-50E/SN ordering code. Qualification and environmental-document status should be confirmed for the exact ordering code and intended application.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

mcp3550 datasheet mcp3550 pdf MCP3550-50E/SN datasheet MCP3550-50E/SN pinout MCP3550-50E/SN specifications MCP3550-50E/SN equivalent MCP3550-50E/SN replacement MCP3550-50E/SN vs MCP3551T-E/SN Microchip MCP3550-50E/SN MCP3550-50E/SN price MCP3550-50E/SN stock MCP3550-50E/SN application circuit

Componentes & términos relacionados

Microchip Technology MCP3550-50E/SN MCP3551T-E/SN MCP3550-50E/SNVAO MCP3551-50E/SN analog-to-digital converter ADC delta-sigma ADC sigma-delta ADC single-channel ADC data converter semiconductor SPI fully differential input 22-bit resolution 21.9-bit effective resolution 12.5 SPS 2.5 μV RMS output noise automatic offset and gain calibration SOIC-8 8-pin SOIC surface mount SMD industrial process control pressure measurement load-cell measurement RoHS AEC-Q100
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ