MCP3550-50E/SN - 22-Bit, 12.5 SPS Single-Channel ADC
部品番号: MCP3550-50E/SN ✓ 生産中MCP3550-50E/SN 概要
An ADC is a data-conversion IC that transforms an analog voltage into a digital number for processing, storage, or transmission. Sigma-delta ADCs belong to the data-converter and signal-processing hierarchy. They use oversampling, digital filtering, and noise shaping to obtain high resolution and excellent noise performance from relatively slow input signals. The MCP3550 uses a fully differential input architecture, allowing sensor signals to be measured with common-mode rejection and improved immunity to externally coupled noise.
Key characteristics include 22-bit resolution, 12.5 SPS conversion performance, 2.5 μV RMS output noise, and effective resolution of 21.9 bits. Automatic internal offset and gain calibration helps reduce systematic error, while the differential inputs suit bridge sensors, current-shunt measurements, and other signals centered around a common reference voltage. The device is offered in the space-saving 8-pin SOIC package, with an 8-pin MSOP option also available in the MCP3550 family.
The delta-sigma architecture prioritizes resolution and noise rather than high conversion speed. This makes the MCP3550 appropriate for slow-changing measurements such as temperature, pressure, load, flow, and chemical-sensor outputs. A digital filter removes out-of-band noise after sampling, so the input bandwidth should be constrained to avoid aliasing and to prevent high-frequency signals from affecting measurement accuracy. Its differential signal path also requires careful common-mode voltage and reference design.
Typical applications include industrial pressure transmitters, load-cell and strain-gauge instrumentation, temperature measurement, battery or power-supply monitoring, laboratory data acquisition, and process-control equipment. Using a differential input arrangement helps preserve measurement integrity when the sensor output is small relative to the analog common-mode voltage. Systems requiring simultaneous acquisition of several channels can pair it with a multiplexer when the required sampling rate remains within the converter's 12.5 SPS capability.
The principal design consideration is analog signal conditioning around the ADC. Input filtering, differential driver stability, reference decoupling, grounding, and digital trace isolation directly affect achievable resolution. Designers should also calculate the required output-data rate and digital-filter settling time before allocating acquisition slots in a multichannel system. The SOIC-8 package permits straightforward assembly but requires adequate copper and thermal consideration when used near the upper temperature limit.
This product page combines the manufacturer specifications with practical interpretation of the MCP3550-50E/SN architecture, pinout availability, package constraints, selection guidance, and drop-in alternatives. It also identifies where a related converter changes output-noise, calibration, sampling-speed, or packaging characteristics, helping engineers choose a device that matches the actual measurement chain rather than relying on resolution alone.
ドロップイン代替品: MCP3550-50E/SN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MCP3551T-E/SN
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3550-50E/SNVAO
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3551-50E/SN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MCP3550-50E/SN 最大定格&電気的特性
| 分解能 | 22 bit |
| Effective Resolution | 21.9 bit |
| Conversion Rate | 12.5 SPS |
| Number of Channels | 1 channel |
| Architecture | 1 sigma-delta |
| Input Type | Fully differential analog input |
| 出力ノイズ | 2.5 μV RMS |
| Offset and Gain Calibration | Automatic internal calibration |
| Digital Interface | SPI |
| 電源電圧 | 4.5 V |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 8-pin SOIC |
| 実装タイプ | Surface mount |
| Family Package Options | 8-pin MSOP and 8-pin SOIC |
| RoHS ステータス | Compliant |
| ライフサイクル状態 | In production |
MCP3550-50E/SN 8-pin msop and 8-pin soic ピン配置ガイド
MCP3550-50E/SN (8-pin msop and 8-pin soic パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3550-50E/SN.
詳細は データシート をご参照ください。
主な用途
MCP3550-50E/SN の用途: 6 件s: Industrial Pressure Transmitters, Load-Cell and Strain-Gauge Measurement, Temperature and Thermistor Acquisition, Battery and Power-Supply Monitoring, Laboratory Data Acquisition, Process-Control and Chemical Sensors.
Industrial Pressure Transmitters
The MCP3550-50E/SN fits slow-changing pressure-sensor signals because its 22-bit resolution and 21.9-bit effective resolution preserve small changes in a narrow analog range. The fully differential input accepts a sensor centered around a common-mode voltage and rejects common-mode disturbance better than a single-ended arrangement. At 12.5 SPS, the converter suits temperature, pressure, and process-control measurements that change over seconds rather than waveforms. Designers should band-limit the input, decouple the 4.5 V supply, and verify the selected reference against the required input span.
おすすめ
Load-Cell and Strain-Gauge Measurement
The MCP3550-50E/SN is suitable for bridge-based force and strain measurements where the useful signal is small and common-mode rejection is important. Its differential sigma-delta input architecture supports direct comparison of the bridge excitation with a reference network, while automatic internal offset and gain calibration helps control systematic conversion error. The 2.5 μV RMS noise specification makes the converter attractive for high-resolution front ends. A stable bridge excitation, low-noise reference, and carefully shielded analog routing remain essential for achieving useful field accuracy.
おすすめ
Temperature and Thermistor Acquisition
The MCP3550-50E/SN can digitize thermistor or resistive temperature-sensor networks when high resolution is more important than rapid conversion. Its 22-bit nominal resolution and 12.5 SPS rate are well matched to thermal signals that vary slowly, allowing the digital filter to reject noise outside the measurement bandwidth. The differential input arrangement can help when the sensing element is connected to a reference network, while the -40°C to +125°C device rating supports industrial environmental requirements. Component tolerances, self-heating, and bridge or divider excitation drift should be included in the calibration budget.
おすすめ
Battery and Power-Supply Monitoring
The MCP3550-50E/SN is appropriate for slow-changing battery, charger, or power-rail measurements where a differential input can monitor a scaled voltage relative to a stable reference. The 12.5 SPS conversion rate is adequate for supervisory and energy-management functions rather than transient waveform capture. Its 21.9-bit effective resolution can reveal small changes in a regulated rail, but the useful result also depends on reference stability, input-divider accuracy, and the analog filter's settling behavior. The converter's 4.5 V supply architecture must be reconciled with the monitored system voltage and grounding arrangement.
おすすめ
Laboratory Data Acquisition
The MCP3550-50E/SN can serve as a precision front end in laboratory systems measuring slow sensor outputs, current-shunt voltages, or calibrated analog quantities. Its SPI interface allows a controller to retrieve digital results, while the 22-bit resolution and 2.5 μV RMS noise support measurements requiring more resolution than a conventional lower-cost ADC. The 12.5 SPS rate makes it most appropriate for temperature, force, pressure, and laboratory channels rather than audio-band or vibration waveforms. Firmware should account for digital-filter latency and discard results that have not reached a settled output condition.
おすすめ
Process-Control and Chemical Sensors
The MCP3550-50E/SN suits electrochemical, conductivity, and chemical-sensor systems that produce slowly varying differential signals. The sigma-delta architecture provides high resolution and narrow-band filtering, while automatic offset and gain calibration helps compensate for device-level errors that are important in long-duration process measurements. Its -40°C to +125°C operating range supports demanding industrial environments. The analog front end should nevertheless include low-noise excitation, defined input bandwidth, reference compensation, and diagnostics to distinguish sensor drift from converter or system-level errors.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3550-50E/SN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3551T-E/SN | MCP3550-50E/SNVAO | MCP3551-50E/SN |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 8-pin SOIC | 8-pin SOIC - same | 8-pin SOIC - same | 8-pin SOIC - same |
| Resolution | 22 bit | 22 bit | 22 bit | 22 bit |
| Digital Interface | SPI | SPI | SPI | SPI |
| Operating Temperature Range | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C | -40°C to +125°C |
主な差別化要因
- Documented precision at a 12.5 SPS conversion rate (vs MCP3551T-E/SN)
- Same MCP3550-50E electrical architecture and footprint (vs MCP3550-50E/SNVAO)
- Automatic offset and gain calibration in a precision single-channel ADC (vs MCP3551-50E/SN)
設計ノート
Route the differential input and reference signals close to the converter and away from SPI clock and switching-node traces. Use a continuous ground plane, minimize input-loop area, and place input and reference filtering capacitors at their associated pins. The fully differential architecture can reject common-mode noise, but it cannot recover performance lost through unequal routing, parasitic pickup, or reference ripple.
Limit the analog input bandwidth to the signal and digital-filter requirements. A sigma-delta ADC samples the input and rejects out-of-band noise digitally, but frequencies above the Nyquist rate can alias into the measurement band. Add only the analog filtering needed to prevent aliasing, then account for the converter's output settling behavior when scheduling successive channel conversions.
Decouple the 4.5 V supply locally with the capacitance and placement specified in the manufacturer datasheet. Keep the reference voltage quiet and verify its behavior over the full -40°C to +125°C range. Power-supply and reference fluctuations appear directly in the converted result, so a low-noise reference and short supply return path are as important as the nominal converter resolution.
コンプライアンス情報
RoHS compliance is stated for the MCP3550-50E/SN ordering code. Qualification and environmental-document status should be confirmed for the exact ordering code and intended application.