Microchip Technology

MCP6022-I/ST - Dual 10 MHz Rail-to-Rail Op Amp | Microchip

N.º de pieza: MCP6022-I/ST ✓ Activo
Less than 0.5 mV Vdss 1.0 mA per amplifier Id 8-lead TSSOP Package
MOQ: 1 |

MCP6022-I/ST Descripción general

The Microchip Technology MCP6022-I/ST is a dual operational amplifier with a 10 MHz gain-bandwidth product, typical operating current of 1.0 mA per amplifier, and input offset voltage below 0.5 mV, housed in an 8-lead TSSOP package. According to the manufacturer product page, the device supports a single supply as low as 2.5 V and consumes less than 1.35 mA of quiescent current per amplifier.

An operational amplifier, commonly called an op amp, is a voltage-controlled differential amplifier that uses feedback to amplify the difference between two input voltages. The MCP6022 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its dual configuration provides two amplifiers in one package, allowing one device to serve two independent signal paths while reducing board area and package count.

Key features include rail-to-rail input and output operation, a 10 MHz gain-bandwidth product, low offset voltage below 0.5 mV, and low typical operating current of 1.0 mA. The rail-to-rail output swing is particularly useful in low-voltage systems because it allows the amplifier to approach the supply rails more closely than a conventional output stage. Low bias current supports high-impedance source connections, while the CMOS implementation provides high open-loop gain and low power consumption.

The MCP6022 uses Microchip's advanced CMOS technology to combine low bias current, high-speed operation, high open-loop gain, and rail-to-rail output swing. Its 10 MHz bandwidth makes it suitable for signal-conditioning stages that require more bandwidth than a general-purpose low-frequency amplifier while maintaining a relatively low 1.0 mA typical operating current. The dual amplifier architecture supports independent channels or a differential amplifier arrangement.

Typical applications include low-voltage sensor conditioning, current-feedback instrumentation, audio signal processing, active filtering, and general-purpose analog signal amplification. Two amplifiers in one 8-lead TSSOP can simplify designs requiring matched channels, such as stereo audio preamplification, dual-axis sensor interfaces, or differential-to-single-ended conversion. Supply and decoupling requirements must still be evaluated for each operating point.

The primary design consideration is system-level power and stability planning. Keep the input common-mode voltage and output swing within the operating limits described by the manufacturer datasheet, and place the supply bypass capacitor close to the positive and ground pins. Because the device is intended for low-voltage operation, verify that signal amplitudes and output loads remain compatible with the selected supply voltage.

This page organizes the manufacturer specifications, package information, application guidance, and verified drop-in alternatives for faster engineering evaluation. For a proposed replacement, confirm pin assignment, electrical limits, temperature grade, stability, and the target circuit's gain and loading before approving a PCB substitution.

Alternativas directas para MCP6022-I/ST — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

Variantes de esta serie

Modelos de la misma serie compatibles directamente con MCP6022-I/ST (mismo factor de forma y huella) — difiere en Amplifier Type, Package, Typical Operating Current.

Microchip Technology
Amplifier Type: Single operational amplifier
Package: 8-pin TSSOP
Typical Operating Current: 1.0 mA

MCP6002-I/ST

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-lead TSSOP
Uses the same 8-lead TSSOP footprint, but has a lower gain-bandwidth product than the 10 MHz MCP6022-I/ST.

📋 Alternativa de referencia (no en el catálogo)

MCP6022-E/ST

✅ Sustitución directa ⚠️ Especificaciones sin verificar
📦 8-lead TSSOP
Retains the 10 MHz gain-bandwidth product and 8-lead TSSOP pinout, with a different extended-temperature ordering option.

📋 Alternativa de referencia (no en el catálogo)

MCP6022-I/ST Valores máximos y características eléctricas

Amplifier Type Dual general-purpose operational amplifier
Number of Amplifiers 2 amplifiers
Gain-Bandwidth Product 10 MHz
Typical Operating Current 1.0 mA per amplifier
Maximum Quiescent Current Less than 1.35 mA per amplifier
Input Offset Voltage Less than 0.5 mV
Minimum Single-Supply Voltage 2.5 V
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Technology Advanced CMOS
Bias Current Low
Open-Loop Gain High
Encapsulado 8-lead TSSOP
Tipo de montaje Surface mount
Product Type Standard general-purpose amplifier

Configuración de pines de MCP6022-I/ST

TSSOP-8 Package Pinout Diagram TSSOP-8 8-pin thin shrink small outline, P0.65mm, JEDEC MO-153. 1 8 2 7 3 6 4 5 TSSOP-8
Pin 1 OUTA — Amplifier A output
Pin 2 IN A- — Inverting input for amplifier A
Pin 3 IN A+ — Non-inverting input for amplifier A
Pin 4 V- — Negative power supply or ground in single-supply operation
Pin 5 IN B+ — Non-inverting input for amplifier B
Pin 6 IN B- — Inverting input for amplifier B
Pin 7 OUTB — Amplifier B output
Pin 8 V+ — Positive power supply

Aplicaciones típicas

MCP6022-I/ST es adecuado para 6 aplicacións: Low-Voltage Sensor Signal Conditioning, Stereo Audio Preamplification, Active Analog Filtering, Current Measurement Signal Path, Data Acquisition Front End, Industrial Control Signal Amplification.

🧩

Low-Voltage Sensor Signal Conditioning

The MCP6022-I/ST is suitable for conditioning sensor signals in compact, low-voltage systems because its single supply can be as low as 2.5 V and its input and output are rail-to-rail. The 10 MHz gain-bandwidth product provides more bandwidth than a slow precision-only amplifier, while the input offset voltage below 0.5 mV helps preserve small differential signals. Place the amplifier between the sensor and the following ADC or digital processing stage, and include close supply bypassing. Confirm that the sensor output stays within the amplifier's common-mode range and that the selected closed-loop gain remains stable with the sensor and ADC input capacitances.

🎧

Stereo Audio Preamplification

The dual MCP6022-I/ST can provide two independent low-voltage audio preamplifier channels in one 8-lead TSSOP package. Its rail-to-rail output swing is useful when the available supply voltage limits the usable output range, while the 10 MHz gain-bandwidth product provides useful bandwidth for audio-band signal paths. Both amplifiers operate from a supply as low as 2.5 V, and typical operating current is 1.0 mA per amplifier. Keep the two channels symmetrical when matching input impedances and gain networks, and verify output swing, load impedance, and distortion requirements against the manufacturer electrical characteristics.

🔧

Active Analog Filtering

The MCP6022-I/ST fits active filter stages requiring more bandwidth than a low-speed general-purpose amplifier. Its 10 MHz gain-bandwidth product allows useful closed-loop gain to remain available across higher signal frequencies, while rail-to-rail input and output behavior supports low-amplitude filter nodes supplied from a 2.5 V rail or above. Use the amplifier in the standard inverting or non-inverting topology and calculate resistor and capacitor tolerances around the required frequency response. Confirm loop gain, phase margin, output loading, and power-supply rejection in the final filter because the manufacturer data identifies the device as a low-power CMOS operational amplifier.

⚡

Current Measurement Signal Path

The MCP6022-I/ST can amplify the differential voltage generated by a current-sense network in low-voltage power instrumentation. Rail-to-rail input operation helps use the available signal range, and the less-than-0.5 mV input offset specification limits the amplifier's inherent contribution when the sensed voltage is small. The 10 MHz gain-bandwidth product is suitable for measurement paths that need reasonable bandwidth beyond DC. Position the amplifier close to the sense network, maintain a low-impedance reference return, and avoid placing high-gain circuitry where it can amplify switching-node noise. The load and common-mode limits must remain within the manufacturer electrical limits.

📟

Data Acquisition Front End

The dual MCP6022-I/ST can provide two low-power analog channels ahead of an ADC in a compact data-acquisition design. Operation from a single supply as low as 2.5 V supports low-voltage sensor systems, while rail-to-rail input and output operation improves utilization of the available signal range. The 10 MHz gain-bandwidth product is useful when each channel requires bandwidth beyond a static-DC measurement, and typical operating current of 1.0 mA per amplifier supports power-constrained instrumentation. Check the ADC input range, acquisition time, drive requirements, and the amplifier's output swing. Add local supply decoupling and keep high-impedance input nodes physically short to reduce sensitivity to stray capacitance and leakage.

🏭

Industrial Control Signal Amplification

The MCP6022-I/ST is applicable to low-level control and instrumentation signals where a dual amplifier provides two channels without using two separate packages. Its rail-to-rail input and output behavior is advantageous when the control system operates from a low-voltage rail, and the 10 MHz gain-bandwidth product supports signals beyond very-low-frequency operation. Typical operating current of 1.0 mA per amplifier is useful in distributed or battery-powered industrial equipment. Confirm the industrial ambient-temperature requirement, transient environment, grounding strategy, and output load for each channel. Stable feedback-network layout and close placement of the supply bypass capacitor are important when the source impedance is high or the signal path is fast.

Resumen de productos recomendados

MCP6022-I/ST Microchip Technology Se usa en: Low-Voltage Sensor Signal Conditioning, Stereo Audio Preamplification, Active Analog Filtering, Current Measurement Signal Path, Data Acquisition Front End, Industrial Control Signal Amplification MCP6002-I/ST Lower-bandwidth same-package alternative Se usa en: Low-Voltage Sensor Signal Conditioning, Stereo Audio Preamplification, Active Analog Filtering, Current Measurement Signal Path, Data Acquisition Front End, Industrial Control Signal Amplification
What are the key specifications of MCP6022-I/ST that engineers should know?
The MCP6022-I/ST is a dual operational amplifier with a 10 MHz gain-bandwidth product, typical operating current of 1.0 mA per amplifier, input offset voltage below 0.5 mV, and an 8-lead TSSOP package. According to the Microchip manufacturer product page, it operates from a single supply as low as 2.5 V and provides rail-to-rail input and output capability. These characteristics make the device suitable for low-voltage, general-purpose analog signal conditioning.
What is the operating voltage of MCP6022-I/ST?
The MCP6022-I/ST operates from a single supply as low as 2.5 V. According to the Microchip manufacturer product page, this low minimum supply voltage makes the dual amplifier suitable for compact systems operating from low-voltage rails. The manufacturer product page also confirms operation in standard 8-lead PDIP, SOIC, and TSSOP packages, while the MCP6022-I/ST order code specifically identifies the TSSOP configuration.
How much current does MCP6022-I/ST consume?
The MCP6022-I/ST has a typical operating current of 1.0 mA per amplifier and a quiescent current below 1.35 mA per amplifier. According to the Microchip manufacturer product page, this low-current CMOS implementation supports power-conscious analog designs. Because the package contains two amplifiers, engineers should evaluate the aggregate supply demand for both channels while also accounting for load-dependent output current.
Is MCP6022-I/ST rail-to-rail?
Yes, the MCP6022-I/ST provides rail-to-rail input and output operation. According to the Microchip manufacturer product page, the device combines this capability with a 10 MHz gain-bandwidth product and less than 1.35 mA of quiescent current per amplifier. These characteristics are useful in low-voltage systems where the signal range approaches the available supply voltage and conventional amplifier outputs would leave less usable swing.
Where can I download the MCP6022 datasheet PDF?
The MCP6022 manufacturer product page is available through the Microchip link on this page and provides access to the device documentation. The manufacturer describes the MCP6022 as a dual 10 MHz operational amplifier with rail-to-rail input and output, less than 0.5 mV offset voltage, and operating current of 1.0 mA. Use the manufacturer datasheet for the authoritative pin description, electrical limits, and application guidance.
Where can I find the MCP6022 pinout?
The MCP6022-I/ST pinout is documented in the Microchip manufacturer datasheet for the 8-lead TSSOP package. This order code contains one dual operational amplifier, with two output pins, four input pins, one positive-supply pin, and one ground pin. Use the manufacturer pin-description table when assigning PCB tracks, especially when comparing a candidate replacement with a different shutdown or enable arrangement.
What can replace MCP6022-I/ST?
A drop-in replacement must preserve the 8-lead TSSOP footprint, pin assignments, amplifier count, supply range, and required bandwidth. MCP6002-I/ST is a same-package candidate from Microchip, but its lower bandwidth makes it appropriate only when the original circuit does not depend on the MCP6022-I/ST's 10 MHz gain-bandwidth product. Confirm stability, input and output limits, offset requirements, and temperature grade before using any replacement in production.
What is the best Microchip equivalent for MCP6022-I/ST?
MCP6002-I/ST is the closest same-package candidate identified for the MCP6022-I/ST because both are dual amplifiers in an 8-lead TSSOP. The key trade-off is bandwidth: the MCP6022-I/ST provides a 10 MHz gain-bandwidth product, whereas the MCP6002-I/ST is a lower-bandwidth device. Choose it only for signal paths that remain within the alternative's gain-bandwidth and stability requirements.
Is MCP6022-I/ST the same as MCP6002?
No, MCP6022-I/ST and MCP6002 are not electrically identical, although an MCP6002-I/ST configuration can use the same 8-lead TSSOP footprint. The MCP6022-I/ST offers a 10 MHz gain-bandwidth product and typical operating current of 1.0 mA per amplifier. According to the manufacturer product information, the MCP6022 also uses rail-to-rail operation; suitability as a replacement therefore depends on the alternative's electrical limits and the target signal bandwidth.
MCP6022-I/ST vs MCP6002 - which is better for a sensor amplifier?
The MCP6022-I/ST is generally better when the sensor interface needs the higher 10 MHz gain-bandwidth product. The Microchip manufacturer identifies offset voltage below 0.5 mV and typical operating current of 1.0 mA per amplifier for the MCP6022. MCP6002-I/ST may be suitable for a slower, less demanding channel, but its lower bandwidth can limit gain at higher signal frequencies and increase phase shift.
When should I choose MCP6022-I/ST over MCP6002?
Choose MCP6022-I/ST when signal bandwidth, phase margin, or operating speed is important because the manufacturer specifies a 10 MHz gain-bandwidth product. It also suits low-voltage designs needing rail-to-rail input and output behavior and less than 0.5 mV offset voltage. Choose MCP6002-I/ST only when its lower-bandwidth response still covers the required signal and offers an acceptable replacement path.
Is MCP6022-I/ST suitable for low-voltage sensor conditioning?
Yes, MCP6022-I/ST is suitable for low-voltage sensor conditioning because the manufacturer specifies operation from a single supply as low as 2.5 V, rail-to-rail input and output capability, and less than 0.5 mV offset voltage. Its low bias current also suits high-impedance sources. Verify the sensor output range, required closed-loop gain, noise bandwidth, and capacitive loading before finalizing the amplifier configuration.
Where to buy MCP6022-I/ST online?
Use the Request a Quote form on this page to request MCP6022-I/ST availability, current pricing, and lead time for your required quantity. The manufacturer identifies the device as an active MCP6022 product, and current distributor listings include the exact MCP6022-I/ST order code. Submit the target quantity, shipment location, and packaging requirement so the quotation can reflect the appropriate supply conditions.
What is the price of MCP6022-I/ST?
Use the Request a Quote form on this page for the current MCP6022-I/ST unit price and quantity pricing. Market pricing can vary with quantity, inventory, date, and delivery terms, so a static quotation may become stale. The structured pricing area on this page reflects the current listing evidence, while the quote form supports requests for larger production quantities, scheduled deliveries, and specific packaging requirements.
What is the lead time and stock status for MCP6022-I/ST?
Request current stock, minimum order quantity, and lead time for MCP6022-I/ST through the Request a Quote form on this page. Distributor search results identify the exact order code, but availability can change rapidly by quantity and packaging configuration. Include your required delivery date and shipment destination in the request so the supplier can confirm the most relevant schedule.
Is MCP6022-I/ST compliant with RoHS and REACH?
The RoHS and REACH status of MCP6022-I/ST should be confirmed from the current manufacturer product documentation or the applicable material declaration before a regulated production release. For RoHS, use the manufacturer material declaration or the current Microchip product documentation. For REACH, request the current declaration for the exact order code and package configuration from the supplier.

Datos de referencia de ingeniería para MCP6022-I/ST — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose MCP6022-I/ST for low-voltage, general-purpose analog designs that need two amplifiers, rail-to-rail input and output behavior, and a 10 MHz gain-bandwidth product. Its single-supply operation can begin at 2.5 V, typical operating current is 1.0 mA per amplifier, and input offset voltage is below 0.5 mV. Choose MCP6002-I/ST only when the same 8-lead TSSOP footprint is needed but the circuit operates within the lower-bandwidth device's capability. Choose MCP6022-E/ST when the same electrical core and pinout are needed but the application requires the extended-temperature ordering option. In every case, verify the manufacturer pin table, input common-mode range, output swing, stability, load capability, and temperature requirement before committing to a replacement.

Comparación con alternativas

Parámetro Este producto MCP6002-I/ST MCP6022-E/ST
Brand Microchip Technology Microchip Technology Microchip Technology
Package 8-lead TSSOP 8-lead TSSOP 8-lead TSSOP
Number of Amplifiers 2 amplifiers 2 amplifiers 2 amplifiers

Diferenciadores clave

  • Higher bandwidth than the lower-bandwidth same-package alternative (frente a MCP6002-I/ST)
  • Rail-to-rail signal operation from a low-voltage supply (frente a MCP6002-I/ST)
  • Low offset and operating current in a dual package (frente a MCP6022-E/ST)

Notas de diseño

Decouple the positive supply and ground pins locally with the capacitor configuration specified by the manufacturer. Keep the connection from the bypass capacitor to the device short because trace inductance can reduce high-frequency supply rejection. The MCP6022-I/ST supports single-supply operation from 2.5 V, but the selected rail must still provide adequate output swing for the required signal amplitude and load. Do not infer output capability from supply voltage alone.

Do not treat the 8-lead TSSOP footprint as proof that every dual amplifier is electrically interchangeable. MCP6002-I/ST uses the same package but has a different bandwidth profile, while a device with shutdown or enable logic may assign a package pin differently. Compare the manufacturer pin-description table, common-mode limits, output swing, slew behavior, and stability requirements before treating a candidate as a drop-in replacement.

Keep each feedback component close to its corresponding amplifier channel and route the inverting input as a short loop on the PCB. For high-impedance sensors, minimize the length of input traces and avoid running them beside switching nodes or high-current return paths. The two amplifier channels share a package and supply but should use symmetric grounding and decoupling arrangements when matched behavior is important.

The 10 MHz gain-bandwidth product makes feedback topology and board parasitics more important than they would be in a very slow precision amplifier. Confirm closed-loop stability for the intended gain with the actual source resistance, load, and output capacitance. If the circuit drives an ADC or sampling network, evaluate settling requirements and keep the amplifier output connection short to minimize coupling into the sampling node.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration for MCP6022-I/ST was identified in the available manufacturer and distributor information.

Datos verificados el: 2026-11-15 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

mcp6022 datasheet mcp6022 pinout mcp6022 op amp mcp6022 vs mcp6002 mcp6022 price mcp6022 pdf mcp6022 equivalent MCP6022-I/ST datasheet PDF MCP6022-I/ST pinout MCP6022-I/ST replacement MCP6022-I/ST price MCP6022-I/ST application circuit

Componentes & términos relacionados

Microchip Technology MCP6022-I/ST MCP6022 MCP6002-I/ST MCP6022-E/ST operational amplifier op amp dual amplifier analog IC semiconductor rail-to-rail input rail-to-rail output gain-bandwidth product 10 MHz input offset voltage 0.5 mV operating current 1.0 mA quiescent current CMOS technology low bias current high open-loop gain 8-lead TSSOP TSSOP family surface-mount package single-supply operation 2.5 V sensor signal conditioning active filter audio preamplifier data acquisition current measurement
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ