MK10DX64VMC7 - Kinetis K10 Cortex-M4 MCU 72MHz | NXP
N.º de pieza: MK10DX64VMC7 ✓ Activo| Cant. | Precio unitario | Total |
|---|---|---|
| 1 | $3.76 | $3,76 |
| 10 | $3.49 | $34,90 |
| 100 | $3.2 | $320,00 |
| 500 | $2.95 | $1.475,00 |
| 1.000 | $2.72 | $2.720,00 |
MK10DX64VMC7 Descripción general
A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals on one die, serving as the embedded computing backbone of modern electronic systems. Within the product hierarchy, the MK10DX64VMC7 sits at: ARM Cortex-M4 32-bit core -> Kinetis K10 family -> Kinetis K series -> NXP mid-performance MCU portfolio. Microcontrollers replace discrete processor-plus-peripheral chip sets, reducing board area, BOM cost, and system power consumption while improving reliability.
Key features include the 72 MHz Cortex-M4 core with DSP instructions and single-cycle MAC for efficient control-loop execution, 64 KB on-chip flash program memory, NXP's flexible low-power mode architecture, and high-precision analog integration that the Kinetis K10 family is known for. The scalable Kinetis platform allows designers to migrate between flash sizes and pin-compatible package options as product requirements evolve.
Architecturally, the device uses the ARMv7E-M Cortex-M4 processor with a nested vectored interrupt controller (NVIC), which delivers deterministic interrupt latency for real-time control applications. The K10 sub-family clock system includes an FLL (frequency-locked loop) with multiple reference options; per the K10 datasheet, mode transitions involving the FLL reference divider, trim value, DMX32 bit, or DRS bits require observing specified timing constraints during changes between FLL-enabled (FEI, FEE, FBE, FBI) and FLL-disabled (BLPE, BLPI) modes.
Typical applications include industrial control and factory automation nodes, consumer appliance control boards, and embedded instrumentation requiring a balance of DSP-capable 32-bit performance and cost efficiency. The 121-ball 8x8 mm MAPBGA suits space-constrained, high-pin-count designs needing multiple communication ports.
Design consideration: BGA packages require controlled-impedance PCB fabrication and X-ray or acoustic inspection capability for assembly quality assurance; verify your contract manufacturer supports 0.8 mm-pitch BGA assembly before selecting this package option.
This page synthesizes distributor pricing, same-footprint drop-in alternatives from the Kinetis and broader NXP families, and practical design notes not found in the manufacturer datasheet, helping engineers make faster sourcing and design decisions.
Alternativas directas para MK10DX64VMC7 — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con MK10DX64VMC7 (mismo factor de forma y huella) — difiere en Peripherals, Connectivity, Flash Memory, Number of I/O, Core Processor.
Herramienta de comparación rápida — seleccione piezas alternativas para compararlas lado a lado:
MK20DX64VMC7
✅ Sustitución directa✓ En stock
$1.78 / unidad
Ver hoja de datos →MK12DX128VMC5
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →MK21DN512VMC5
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
Consulte el precio
Ver hoja de datos →MKL26Z128VMC4
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$2.95 / unidad
Ver hoja de datos →MK21DN512AVLK5
✅ Sustitución directa ⚠️ Especificaciones sin verificar✓ En stock
$4.8 / unidad
Ver hoja de datos →MK10DX64VMC7 Valores máximos y características eléctricas
| Core Processor | ARM Cortex-M4 |
| Core Size | 32-Bit |
| Frecuencia de reloj máxima | 72 MHz |
| Flash Memory | 64 KB (64K x 8) |
| Product Family | Kinetis K10 (K1x Baseline Series) |
| Encapsulado | 121-MAPBGA (8x8 mm) |
| Number of Terminals | 121 |
| Terminal Form | Ball (BGA) |
| Tipo de montaje | Surface Mount |
| Operating Temperature Grade | Industrial |
| Peripherals | Analog, communication, timing and control peripherals |
| Low-Power Modes | Flexible low-power options |
| Analog Integration | High-precision analog integration |
Guía de configuración de pines de MK10DX64VMC7 121-mapbga (8x8 mm)
Configuración de pines para MK10DX64VMC7 (encapsulado 121-mapbga (8x8 mm)). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para MK10DX64VMC7.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
MK10DX64VMC7 es adecuado para 6 aplicacións: Industrial Control and Automation, Consumer Appliance Control, Embedded Instrumentation and Sensing, Motor Control Drives, IoT Sensor Nodes, Building Automation and HVAC.
Industrial Control and Automation
The MK10DX64VMC7 fits industrial control nodes where a 72 MHz Cortex-M4 with DSP instructions executes fast control loops such as PID regulation, digital power conversion, and motor commutation. According to NXP, the Kinetis K10 family targets industrial applications with high-precision analog integration, allowing ADC-based sensing and PWM-based actuation on a single die. The 121-MAPBGA 8x8 mm package provides enough balls for multiple UART, SPI, I2C, and timer channels in compact PLC-style I/O modules. Typical usage places the MCU as the main controller between field sensors and actuators; the 64 KB flash accommodates a modest RTOS or bare-metal control firmware, and the flexible low-power modes suit intermittently powered monitoring nodes.
Recomendado
Consumer Appliance Control
Consumer appliances such as dishwashers, air conditioners, and small kitchen devices need a cost-efficient MCU with adequate peripherals, and the MK10DX64VMC7 at roughly $3.76 (LCSC, as of 2026-10-18) meets that budget while providing 32-bit headroom for touchscreen interfaces, sensor fusion, or brushed-motor control. The K10 family's high-precision analog integration handles NTC temperature sensing and user-interface key scanning without extra external ICs. The 121-MAPBGA 8x8 mm footprint minimizes PCB area in flat control boards. In this role, the MCU drives relays/triacs via GPIO and timers, samples user input, and manages buzzer/display feedback; the 64 KB flash suffices for application plus a lightweight UI framework.
Recomendado
Embedded Instrumentation and Sensing
Portable and bench instrumentation benefits from the MK10DX64VMC7's combination of DSP-capable math (single-cycle MAC for FFT and digital filtering) and K10-family precision analog peripherals. A 72 MHz Cortex-M4 can perform on-the-fly signal conditioning, RMS computation, and calibration math that would overload an 8-bit MCU. The 121-ball package brings out multiple analog and communication balls for interfacing external precision ADCs or front ends over SPI. Designs typically place the MCU behind an analog front end, using the FLL-based clock system for stable sample timing; per the K10 datasheet, clock-mode transitions require observing FLL change constraints to avoid timing glitches during measurement sequences.
Recomendado
Motor Control Drives
The Cortex-M4 core in the MK10DX64VMC7 executes field-oriented control (FOC) algorithms efficiently thanks to DSP extensions and single-cycle multiply-accumulate, making it suitable for small BLDC and PMSM drives in fans, pumps, and power tools. The K10 family provides PWM timers and ADC channels for three-phase current sensing within a single 8x8 mm 121-MAPBGA package. A typical implementation samples phase currents each PWM cycle, runs Clarke/Park transforms and a PI current loop at 16-20 kHz, all within the 72 MHz core budget. The 64 KB flash holds the control stack plus protection and communication firmware; designers should verify ADC sampling latency and PWM dead-time resolution against their motor specifications.
Recomendado
IoT Sensor Nodes
The MK10DX64VMC7 serves as the processing hub in IoT sensor nodes where the flexible low-power modes of the Kinetis K10 family extend battery life between radio transmissions. The 72 MHz Cortex-M4 handles local data preprocessing, filtering, and protocol formatting for external connectivity modules over UART or SPI, while the industrial temperature grade suits outdoor and factory deployments. Node firmware typically sleeps in stop mode, wakes on sensor interrupts, processes data, and reports via a connected radio; the K10 clock system's BLPE/BLPI bypass modes provide low-power clocking between active periods, per the K10 datasheet FLL mode descriptions. The 64 KB flash constrains complex TLS stacks, so pair with a module that offloads security.
Recomendado
Building Automation and HVAC
Building automation controllers - thermostats, damper actuators, and zone controllers - benefit from the MK10DX64VMC7's balance of analog integration, multiple serial ports for RS-485/Modbus or BACnet MS/TP layers, and a 72 MHz core for protocol stacks. The K10 family's high-precision analog converts temperature and humidity sensor inputs directly, while timers generate PWM outputs for valve and fan control. The 121-MAPBGA package supports the ball count needed for isolated communication interfaces and multiple GPIO zones. Firmware typically combines a Modbus slave stack with PID control loops; at 64 KB flash this fits a lean implementation, and designers needing richer stacks can drop in the pin-compatible MK12DX128VMC5 with double the flash.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para MK10DX64VMC7 — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | MK20DX64VMC7 | MK12DX128VMC5 | MK21DN512VMC5 | MKL26Z128VMC4 |
|---|---|---|---|---|---|
| Package | 121-MAPBGA (8x8) | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same | 121-MAPBGA (8x8) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M4 | ARM Cortex-M0+ |
| Max Clock Frequency | 72 MHz | 72 MHz | 72 MHz | 120 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 128 KB | 512 KB | 128 KB |
| Product Family | Kinetis K10 | Kinetis K20 | Kinetis K12 | Kinetis K21 | Kinetis KL2 (L series) |
| Lifecycle Status | Active | Active | Active | Active | Active |
Diferenciadores clave
- Lowest-cost Cortex-M4 in the VMC footprint family (frente a MK21DN512VMC5)
- Full DSP-capable Cortex-M4 core (frente a MKL26Z128VMC4)
- Cost-optimized baseline when USB is not needed (frente a MK20DX64VMC7)
Notas de diseño
The 121-MAPBGA is a 0.8 mm-pitch BGA requiring controlled PCB fabrication: specify adequate layer count (typically 4+ layers) for ball escape routing and power/ground planes. Verify your contract manufacturer supports BGA assembly with X-ray or acoustic microscope inspection. Per IPC guidance for BGA land patterns, use solder-mask-defined or non-solder-mask-defined pads consistently with your fab's capability. Plan decoupling capacitor placement directly beneath the BGA on the opposite side or inner layers to minimize power loop inductance.
The K10 clock system uses an FLL with multiple modes (FEI, FEE, FBE, FBI) and bypass states (BLPE, BLPI). According to the K10 sub-family datasheet, any change of FLL reference source, reference divider, trim value, DMX32 bit, or DRS bits - and transitions between FLL-enabled and FLL-disabled modes - requires observing specified timing constraints. Design your firmware power-mode state machine to follow these constraints to avoid clock glitches during run-to-low-power transitions.
Confirm flash density before layout reuse: the MK10DX64VMC7 provides 64 KB, but Kinetis VMC-package family members range up to 512 KB (e.g., MK21DN512VMC5). When planning firmware growth or OTA-update capacity, choosing a pin-compatible higher-flash variant early avoids a BOM change later. Also verify SRAM sufficiency for your stack + heap + DMA buffers, since DSP-style processing on the Cortex-M4 consumes RAM quickly.
Información de cumplimiento
Compliance status not present in the provided web data. Industrial temperature grade per distributor listings. Consult NXP product page for official RoHS/REACH declarations.
